© Semiconductor Components Industries, LLC, 2017
March, 2018 − Rev. 6
1Publication Order Number:
NVMFS5C423NL/D
NVMFS5C423NL
Power MOSFET
40 V, 2.0 mW, 150 A, Single N−Channel
Features
•Small Footprint (5x6 mm) for Compact Design
•Low RDS(on) to Minimize Conduction Losses
•Low QG and Capacitance to Minimize Driver Losses
•NVMFS5C423NLWF − Wettable Flank Option for Enhanced Optical
Inspection
•AEC−Q101 Qualified and PPAP Capable
•These Devices are Pb−Free and are RoHS Compliant
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Parameter Symbol Value Unit
Drain−to−Source Voltage VDSS 40 V
Gate−to−Source Voltage VGS ±20 V
Continuous Drain
Current RqJC
(Notes 1, 3) Steady
State
TC = 25°CID150 A
TC = 100°C110
Power Dissipation
RqJC (Note 1)
TC = 25°CPD83 W
TC = 100°C 42
Continuous Drain
Current RqJA
(Notes 1, 2, 3) Steady
State
TA = 25°CID31 A
TA = 100°C 22
Power Dissipation
RqJA (Notes 1 & 2)
TA = 25°CPD3.7 W
TA = 100°C 1.8
Pulsed Drain Current TA = 25°C, tp = 10 msIDM 900 A
Operating Junction and Storage Temperature TJ, Tstg −55 to
+ 175
°C
Source Current (Body Diode) IS81 A
Single Pulse Drain−to−Source Avalanche
Energy (IL(pk) = 14 A)
EAS 280 mJ
Lead Temperature for Soldering Purposes
(1/8″ from case for 10 s)
TL260 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
THERMAL RESISTANCE MAXIMUM RATINGS
Parameter Symbol Value Unit
Junction−to−Case − Steady State RqJC 1.8 °C/W
Junction−to−Ambient − Steady State (Note 2) RqJA 41
1. The entire application environment impacts the thermal resistance values shown,
they are not constants and are only valid for the particular conditions noted.
2. Surface−mounted on FR4 board using a 650 mm2, 2 oz. Cu pad.
3. Maximum current for pulses as long as 1 second is higher but is dependent
on pulse duration and duty cycle.
MARKING
DIAGRAM
www.onsemi.com
XXXXXX
AYWZZ
V(BR)DSS RDS(ON) MAX ID MAX
40 V
2.0 mW @ 10 V
150 A
G (4)
S (1,2,3)
N−CHANNEL MOSFET
D (5,6)
S
S
S
G
D
D
D
D
DFN5
(SO−8FL)
CASE 488AA
STYLE 1
1
See detailed ordering, marking and shipping information on
page 5 of this data sheet.
ORDERING INFORMATION
XXXXXX = 5C423L
XXXXXX = (NVMFS5C423NL) or
XXXXXX = 423LWF
XXXXXX = (NVMFS5C423NLWF)
A = Assembly Location
Y = Year
W = Work Week
ZZ = Lot Traceability
3.0 mW @ 4.5 V
NVMFS5C423NL
www.onsemi.com
2
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter Symbol Test Condition Min Typ Max Unit
OFF CHARACTERISTICS
Drain−to−Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA40 V
Drain−to−Source Breakdown Voltage
Temperature Coefficient
V(BR)DSS/
TJ
17 mV/°C
Zero Gate Voltage Drain Current IDSS VGS = 0 V,
VDS = 40 V
TJ = 25 °C 10
mA
TJ = 125°C 250
Gate−to−Source Leakage Current IGSS VDS = 0 V, VGS = 20 V 100 nA
ON CHARACTERISTICS (Note 4)
Gate Threshold Voltage VGS(TH) VGS = VDS, ID = 90 mA1.2 2.0 V
Threshold Temperature Coefficient VGS(TH)/TJ−5.3 mV/°C
Drain−to−Source On Resistance RDS(on) VGS = 4.5 V ID = 50 A 2.4 3.0
mW
VGS = 10 V ID = 50 A 1.6 2.0
Forward Transconductance gFS VDS =15 V, ID = 50 A 140 S
CHARGES, CAPACITANCES & GATE RESISTANCE
Input Capacitance CISS
VGS = 0 V, f = 1 MHz, VDS = 20 V
3100
pF
Output Capacitance COSS 1300
Reverse Transfer Capacitance CRSS 60
Total Gate Charge QG(TOT) VGS = 4.5 V, VDS = 20 V; ID = 50 A 23 nC
Total Gate Charge QG(TOT) VGS = 10 V, VDS = 20 V; ID = 50 A 50
nC
Threshold Gate Charge QG(TH)
VGS = 4.5 V, VDS = 20 V; ID = 50 A
5.0
Gate−to−Source Charge QGS 9.8
Gate−to−Drain Charge QGD 6.7
Plateau Voltage VGP 3.1 V
SWITCHING CHARACTERISTICS (Note 5)
Turn−On Delay Time td(ON)
VGS = 4.5 V, VDS = 20 V,
ID = 50 A, RG = 1.0 W
12
ns
Rise Time tr7.4
Turn−Off Delay Time td(OFF) 28
Fall Time tf8.1
DRAIN−SOURCE DIODE CHARACTERISTICS
Forward Diode Voltage VSD VGS = 0 V,
IS = 50 A
TJ = 25°C 0.85 1.2
V
TJ = 125°C 0.73
Reverse Recovery Time tRR
VGS = 0 V, dIS/dt = 100 A/ms,
IS = 50 A
41
ns
Charge Time ta23
Discharge Time tb23
Reverse Recovery Charge QRR 29 nC
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
4. Pulse Test: pulse width v 300 ms, duty cycle v 2%.
5. Switching characteristics are independent of operating junction temperatures.
NVMFS5C423NL
www.onsemi.com
3
TYPICAL CHARACTERISTICS
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
0
20
40
60
80
100
120
140
160
180
200
220
0 0.5 1 1.5 2 2.5 3 3.5 4
Figure 1. On−Region Characteristics Figure 2. Transfer Characteristics
VDS, DRAIN−TO−SOURCE VOLTAGE (V) VGS, GATE−TO−SOURCE VOLTAGE (V)
Figure 3. On−Resistance vs. Gate−to−Source
Voltage
Figure 4. On−Resistance vs. Drain Current and
Gate Voltage
VGS, GATE VOLTAGE (V) ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (mW)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (mW)
2.8 V
3.0 V
3.2 V
10 V to
3.8 V
TJ = 125°C
TJ = 25°C
TJ = −55°C
TJ = 25°C
ID = 50 A
TJ = 25°C
VGS = 4.5 V
VGS = 10 V
3.4 V
3.6 V VDS = 3 V
0
20
40
60
80
100
120
140
160
180
200
220
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0
2.6 V
5.0
20 40 200
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
018016060 80 100 140120
Figure 5. On−Resistance Variation with
Temperature
Figure 6. Drain−to−Source Leakage Current
vs. Voltage
TJ, JUNCTION TEMPERATURE (°C) VDS, DRAIN−TO−SOURCE VOLTAGE (V)
15012510075250−25−50
0.7
0.9
1.1
1.3
1.5
1.7
1.9
403510 25155
10
100
100,000
RDS(on), NORMALIZED DRAIN−TO−
SOURCE RESISTANCE
IDSS, LEAKAGE (nA)
VGS = 10 V
ID = 50 A
50 175
TJ = 125°C
TJ = 85°C
1000
10,000
TJ = 150°C
20 30
NVMFS5C423NL
www.onsemi.com
4
TYPICAL CHARACTERISTICS
10
100
1000
10000
0 10203040
Figure 7. Capacitance Variation Figure 8. Gate−to−Source and
Drain−to−Source Voltage vs. Total Charge
VDS, DRAIN−TO−SOURCE VOLTAGE (V) QG, TOTAL GATE CHARGE (nC)
48403224840
0
2
4
6
8
10
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
Figure 10. Diode Forward Voltage vs. Current
RG, GATE RESISTANCE (W)VSD, SOURCE−TO−DRAIN VOLTAGE (V)
100101
1
10
100
1000
C, CAPACITANCE (pF)
VGS, GATE−TO−SOURCE VOLTAGE (V)
t, TIME (ns)
IS, SOURCE CURRENT (A)
VGS = 0 V
TJ = 25°C
f = 1 MHz
CISS
COSS
CRSS
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
0
10
15
20
25
30
5
VDS = 20 V
TJ = 25°C
ID = 50 A
QT
QGS QGD
VGS = 4.5 V
VDD = 20 V
ID = 50 A
td(off)
td(on)
tf
tr
TJ = 125°C
TJ = 25°C
TJ = −55°C
12 16 20 28 36 44
1.0
10.0
100.0
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.
0
Figure 11. Safe Operating Area Figure 12. IPEAK vs. Time in Avalanche
VDS (V) TIME IN AVALANCHE (s)
1001010.1
1
10
100
1000
1
10
IDS (A)
IPEAK (A)
TJ(initial) = 100°C
TJ(initial) = 25°C
1E−04 1E−02
RDS(on) Limit
Thermal Limit
Package Limit
dc
0.01 ms
0.1 ms
1 ms
10 ms
TC = 25°C
VGS ≤ 10 V
1E−03
100
NVMFS5C423NL
www.onsemi.com
5
TYPICAL CHARACTERISTICS
Figure 13. Thermal Characteristics
PULSE TIME (sec)
0.010.001 10.0001 0.10.00001 100.000001
0.01
0.1
1
10
100
RqJA(t) (°C/W)
100 1000
Single Pulse
50% Duty Cycle
20%
10%
5%
2%
1%
DEVICE ORDERING INFORMATION
Device Marking Package Shipping†
NVMFS5C423NLT1G 5C423L DFN5
(Pb−Free)
1500 / Tape & Reel
NVMFS5C423NLWFT1G 423LWF DFN5
(Pb−Free, Wettable Flanks)
1500 / Tape & Reel
NVMFS5C423NLT3G 5C423L DFN5
(Pb−Free)
5000 / Tape & Reel
NVMFS5C423NLWFT3G 423LWF DFN5
(Pb−Free, Wettable Flanks)
5000 / Tape & Reel
NVMFS5C423NLAFT1G 5C423L DFN5
(Pb−Free)
1500 / Tape & Reel
NVMFS5C423NLWFAFT1G 423LWF DFN5
(Pb−Free, Wettable Flanks)
1500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
M3.00 3.40
q0 −−−
_
3.80
12
_
DFN5 5x6, 1.27P
(SO−8FL)
CASE 488AA
ISSUE N DATE 25 JUN 201
8
SCALE 2:1
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION D1 AND E1 DO NOT INCLUDE
MOLD FLASH PROTRUSIONS OR GATE
BURRS.
XXXXXX = Specific Device Code
A = Assembly Location
Y = Year
W = Work Week
ZZ = Lot Traceability
1234
TOP VIEW
SIDE VIEW
BOTTOM VIEW
D1
E1 q
D
E
2
2
B
A
0.20 C
0.20 C
2 X
2 X
DIM MIN NOM
MILLIMETERS
A0.90 1.00
A1 0.00 −−−
b0.33 0.41
c0.23 0.28
D5.15
D1 4.70 4.90
D2 3.80 4.00
E6.15
E1 5.70 5.90
E2 3.45 3.65
e1.27 BSC
G0.51 0.575
K1.20 1.35
L0.51 0.575
L1 0.125 REF
A
0.10 C
0.10 C
DETAIL A
14
L1
e/2
8X
D2
G
E2
K
b
A0.10 B
C
0.05 cL
DETAIL A
A1
c
4 X
C
SEATING
PLANE
GENERIC
MARKING DIAGRAM*
1
XXXXXX
AYWZZ
1
MAX
1.10
0.05
0.51
0.33
5.10
4.20
6.10
3.85
0.71
1.50
0.71
STYLE 1:
PIN 1. SOURCE
2. SOURCE
3. SOURCE
4. GATE
5. DRAIN
M
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
1.270
2X
0.750
1.000
0.905
4.530
1.530
4.5600.495
3.200
1.330
0.965
2X
2X
4X
4X
PIN 5
(EXPOSED PAD)
STYLE 2:
PIN 1. ANODE
2. ANODE
3. ANODE
4. NO CONNECT
5. CATHODE
5.00 5.30
6.00 6.30
PITCH
DIMENSIONS: MILLIMETERS
1
RECOMMENDED
e
2X
0.475
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present. Some product
s
may not follow the Generic Marking.
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
98AON14036D
DOCUMENT NUMBER:
DESCRIPTION:
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
DFN5 5x6, 1.27P (SO−8FL)
© Semiconductor Components Industries, LLC, 2018 www.onsemi.com
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor ’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer ’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body . Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
P
UBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loc
al
Sales Representative
◊
