CARLISLE INTERCONNECT TECHNOLOGIES CABLE ASSEMBLY REF PLANE SLIDING MARKER SMA MALE TO SMA MALE ON 600 CABLE TECHNICAL DATA SHEET REF PLANE TYP. lL. 42" LENGTH PART NUMBER MAX INSERTION LOSS @ 18GHz 0. MAX VSWR +1 @ 18GHz. Ff 1- 1-3636-600-5275 1. 17. Y LENGTHS NOT LISTED ABOVE WILL HAVE THE SAME INSERTION LOSS AND VSWR LIMITS AS THE LONGER ASSEMBLY SHOWN IN THE TABLE ABOVE, 1-3636-600-5222 WILL HAVE THE SAME INSERTION LOSS AND VSWR LIMITS AS 1-3636-600-5224. ASSEMBLIES ELECTRICAL & MECHANICAL SPECIFICATIONS IMPEDANCE, NOMINAL: 50 OHMS CABLE VELOCITY OF PROPAGATION, NOMINAL 70.7 % CABLE MAX. DIAMETER: 0.089 INCHES |MINIMUM BEND RADIUS: 0.43 INCHES TEMPERATURE RANGE: -50to+105 DEGREES C MATING TORQUE: 7-10 _{NCH POUNDS NOTES: a NO MARKER IS REQUIRED FOR CABLE LESS THAN 4.0". 140 120 100 | | | | = [Sar ee We Cable Attenuation |- ic 80 3 r 60 a 2 0 0 2 4 6 8 10 12 14 16 18 Frequency [GHz] Frequency [GHz] COPYRIGHT 2011/2013 ASSEMBLY REVISION:E CARLISLE INTERCONNECT TECHNOLOGIES DATA SHEET REVISION:1 DATA SUBJECT TO CHANGE SMA MALE TO SMA MALE ON 600 CABLE MODIFY DATE.: 5/24/2013TENSOLITE CABLE ASSEMBLY WITH DUTY CYCLE LESS 4 STABILITY dB [0.01 VISIT GUR WEB SITE AT hitp ) www.tensolite.com COPYRIGHT 1995-2007-2013 CARLISLE INTERCONNECT TECHNOLOGIES: DATA SUBJECT TO CHANGE TECHNICAL DATASHEET SMA MALE TO SMA MALE ON 601 SEML-FLEX(R) CABLE. REF PLANE SLIDING MARKER | REF PLANE | (TYP) 1 e~.12 li LENGTH NOTE: NO MARKER IS REQUIRED FOR 6.0" OR LESS fe. \13636\B015299 REY +2013TENSOLITE CABLE ASSEMBLY TECHNICAL DATA SHEET SMA MALE RIGHT ANGLES ON 601 SEMI-FLEX(R) CABLE. SLIDING ELECTRICAL SPECIFICATIONS MARKER IMPEDANCE, NOMINAL: 50 OHMS CAPACITANCE NOMINAL: 28.7 piiFOOT = VELOCITY OF PROPAGATION, NOMINAL: 707% [ [] ] j RELATIVE SHIELDING: -100 db MIN. Lt Lt INSULATION RESISTANCE: 1000 _MEGOHMS MIN. La Eo] DIELECTRIC WITHSTANDING VOLTAGE: 1000 _VRMS MIN. ELECTRICAL DELAY NOMINAL: 1.44 __nsiFOOT LENGTH ELECTRICAL DELAY NOMINAL: 120 ps/iNCH MAX. PULSE RF POWER: 1250 WATTS (INTO A 50 OHM SYSTEM, WITH DUTY CYCLE LESS THAN CW RATING) NOTE: NO MARKERS REQUIRED ON CABLES LESS THAN 6 INCHES. F (IN GHz) --------> | 1 2 [| 4 [ 6 | 12 18 MAX. CwWATTS> [200/ 136 [ 91 | 77 | 46 36 MATERIALS AND FINISHES DESCRIPTION MATERIAL FINISH OR COLOR CABLE JACKET: HIGH STRENGTH WIRE BRAID TIN FILLED MECHANICAL SPECIFICATIONS: MARKER: MIL-I-23053/5 GRAY / BLACK RoHS MARKER: MIL-1-23053/5 GREEN CABLE MAX. DIAMETER: 0.141 INCHES SMA BODY: ASTM-A-582, 303 STAINLESS STEEL _MIL-G-45204 GOLD PLATED MIN. BEND RADIUS: 0.19 INCHES SMA NUT: ASTM-A-582, 303 STAINLESS STEEL _QQ-P-35 PASSIVATED PREFERRED BEND RADIUS: 0.50 INCHES SMA CAP: ASTM-A-582, 303 STAINLESS STEEL _QQ-P-35 PASSIVATED CONNECTOR RETENTION: 50 POUNDS MIN. SMA GASKET: ZZ-R-765, SILICON RUBBER NONE TEMPERATURE RANGE: -5010+105 DEGREES C SOLVENTS: NO OZONE DEPLETING MATERIALS ARE USED MATING TORQUE: 7-40 _ INCH POUNDS CONNECTOR INTERFACE; MIL-STD-348 PAGE 310.3 PART NUMBER VSWR 71 AT ENCY LOSS IN dB AT UPTO 1TO2 | 2T04 | 4TO6 | 6TO 12701 1TO2 | 2TO4 | 4TO6 | 6TO 12TO1 - E : 1,30 E Q - . fs 1,10 -601- 3204 7-601- -601- 3220 i 1.30 : 7 A 3.0 : 1. 1.40 i 28 i4 = TIONS ARE PRODUCT MAXIMUM PLUS MEASURING AINTY. APPL DEG. F, SEA LEVEL AND 20 TO 80% HUMIDITY. SPECIFICATIONS APPLY AT 5 TO 99% RELATIVE HUMIDITY, CONSULT FACTORY FOR PRODUCT CHARACTERISTICS AT OTHER CONDITIONS. AILABLE | THE "1" REPLACE TH SEMI-FLEX IS A REGISTERED TRADEMARK OF TENSOLITE CO. VISIT OUR WEB SITE AT htip://www.tensolite.com COPYRIGHT 1995/2006/2007 TENSOLITE. DATA SUBJECT TO CHANGE file: ....\13737\6013299 REV.-08/05/08TENSOLITE CABLE ASSEMBLY ELECTRICAL SPECIFICATIONS IMPEDANCE, NOMINAL: $0 OHMS CAPACITANCE NOMINAL: 25.4 _piFOOT VELOCITY OF PROPAGATION, NOMINAL: 20.0 % RELATIVE SHIELDING: <-90 dB MIN. INSULATION RESISTANCE: 1000 _MEGOHMS MIN. DIELECTRIC WITHSTANDING VOLTAGE: 1000 _VRMS MIN. ELECTRICAL DELAY: 1.27 _ns/FOOT ELECTRICAL DELAY: 106 ps/INCH MAX, PULSE RF POWER: 1250 WATTS (INTO A 50 OHM SYSTEM, WITH DUTY CYCLE LESS THAN CW RATING) F(INGHz)---------> | 1] 2 [| 4 | 6 | 12 | 18 MAX.cWWaTTS-> [299] 210 | 147 | 119 | 63 | 67 MECHANICAL SPECIFICATIONS: INCHES INCHES 0.200 1.17 3.90 RETENTION: TURE RANGE: + c 45N INCH POUNDS MIL-STO-348_(N WITH SOLID OUTER TING Ti ITEM INFORMATION | MECHANICAL PART NUMBER 1TO2 1.18 1 i-1 - 1-1836-301- 321 1-1836-301- 3224 | F 1-1836-301- 3229 1-1836-301- 3234 1-1836-301- 3248 301- 3296 -1836-301- 1836-301- 3215 1 1.22 22.4 VSWR 1 AT 2704 TECHNICAL DATA SHEET REF PLANE 04 sel es LENGTH MATERIALS AND FINISHES MATERIAL L-P-389 FEP JACKET: : MIL-I-23053/5 CONTACTS: PTFE STAINLESS S STAINLESS ASTM-B-16, BRASS ASTM-B- _TERIALS $21 AND MAXIMUM UPTO1| 1TO2 $22 CHARACTERISTICS 4TO6/|6TO 2TO4 1.30 | 1.50 0.15 F 0 1.20 | 1.25 | 1.30 | 1.50 1 20 1.30 ; 1.30 a 02 5 IN dB AT 4TO6 |6TO1 TYPE N MALE TO SMA MALE ON 301 CABLE -250 HEX ANTI- TORQUE MARKER al kes REF PLANE OR COLOR GREY TINT WHITE / BLACK BLACK MIL. PLATED PASSIVATED PASSIVATED SILVER NOM DELA ns 12701 0 7.28 F = FACTORY STANDARD ITEM MAXIMUM SPECIFICATIONS ARE PRODUCT MAXIMUM PLUS MEASURING SYSTEM UNCERTAINTY. ALL SPECIFICATIONS APPLY AT 73 DEG. F, SEA LEVEL AND 20 TO 80% RELATIVE HUMIDITY. TIONS YAT 5TO VISIT OUR WEB SITE AT http:/Avww.tensolite.com COPYRIGHT 2006 TENSOLITE DATA SUBJECT TO CHANGE RELATIVE HUMIDITY, CONSULT FACTORY FOR PRODUCT file P:\Andover\Techinfo\Data Sheet\Technical\Cable Assemblies\1 1836\3013299 AT OTHER REV. 02/28/06TENSOLITE CABLE ASSEMBLY TECHNICAL DATA SHEET ELECTRICAL SPECIFICATIONS SMP RT.< PLUG TO SMP RT.< PLUG ON SLEEVED 561 Q-FLEX(R) PLUS CABLE. IMPEDANCE, NOMINAL: 50 OHMS CAPACITANCE NOMINAL: 28.8 pfiFOOT VELOCITY OF PROPAGATION, NOMINAL: 70.7% RELATIVE SHIELDING -90 dB MIN. INSULATION RESISTANCE: 4000 _MEGOHMS MIN. DIELECTRIC WITHSTANDING VOLTAGE: 71000 _VRMS MIN. ELECTRICAL DELAY: 1.44 _nsiFOOT \ ELECTRICAL DELAY: 120 _ps/INCH : MAX. PULSE RF POWER: 1250 WATTS (INTO A 50 OHM SYSTEM, WITH DUTY CYCLE LESS THAN CW RATING) F (IN GHz) -------- ary 4 2 [| 4 | 6 MAX. CW WATTS ~-> 38] 26 [| i | 15 [ LENGTH | (+/-40,8 DEGREES @ 6GHZ) | NOTE: PHASE MATCHED TO WITHIN +/-5PS OF A GOLDEN STANDARD MECHANICAL SPECIFICATIONS: MATERIALS AND FINISHES DESCRIPTION MATERIAL FINISH OR COLOR CABLE MAX. DIAMETER: 0.119 INCHES CABLE JACKET: POLYURETHANE CLEAR MIN. BEND RADIUS: 0.69 INCHES MARKER: MIL-I-23053/5 GRAY PREFERRED BEND RADIUS: 2.30 INCHES BOOT: MIL-I-23053/4 BLACK CONNECTOR RETENTION: 30 POUNDS MIN. CONTACTS: ASTM-B-196, BeCu MIL-G-45204 GOLD PLATED TEMPERATURE RANGE: -65/+105 DEGREESC INSULATORS: ASTM-D-1710, PTFE NONE MATING TORQUE: 7-10 INCH POUNDS SMP BODY: ASTM-B-196, BeCu MIL-G-45204 GOLD PLATED CONNECTOR INTERFACES: MIL-STD-348 COMMERCIAL SMP SOLVENTS: NO OZONE DEPLETING MATERIALS ARE USED MECHANICAL CHARACTERISTICS +. LENG ITEM INFORMATION PART NUMBER TE: PRODUCT SPEC! QFLEX IS A REGISTERED TRADEMARK OF TENSOLITE CO. VISIT OUR WEB SITE AT hitp:/Awww.tensolile.com COPYRIGHT 2004 TENSOLITE. DATA SUBJECT TO CHANGE TIONS ARE VERIFIED AT 73 DEG. F, SEA MAXIMUM: UPTO1]) 1TO2 | 2TO4 | 4TO6 1.1 18 S21 ANDS LOSS IN dB AT T MAXIMUM PLUS MEASURING SYSTEM UNCERTAI AND 20 TO RELATIVE HUMIDITY, CONSULT FACTORY FOR file V:\Andover\Techinfo\Data Sheets\Technicai\Cable Assemblies\1 G7G7\5611013 AT OTHER REV: 04/21/04TENSOLITE CABLE ASSEMBLY TECHNICAL DATA SHEET SMP RT.< PLUG TO SMP RT.< PLUG ON SLEEVED 561 Q-FLEX(R) PLUS CABLE. ELECTRICAL SPECIFICATIONS NOMINAL: TIVE SHIELDING INSULATION VRMS MIN. DELAY: \ ; | NCH I LENGTH 1 PULSE RF POWER: WATTS A850 OHM WITH DUTY SSE 2 NOTE: PHASE MATCHED TO WITHIN +/-5PS OF A GOLDEN STANDARD = (+/-10.8 DEGREES @ 6GHZ) MECHANICAL SPECIFICATIONS: MATERIALS AND FINISHES MAX. 0.119 INCHES DESCRIPTION MATERIAL FINISH OR COLOR CABLE JACKET: POLYURETHANE CLEAR PREFERRED BEND RADIUS: BOOT: MIL-I-23053/4 BLACK POUNDS MIN. SMP CONTACT: ASTM-B-196, BeCu MIL-G-45204 GOLD PLATED Cc SMP INSULATOR: ASTM-D-1710, PTFE NONE SMP BODY: ASTM-B-196, BeCu MIL-G-45204 GOLD PLATED COMMERCIAL SMP (SOLVENTS: NO OZONE DEPLETING MATERIALS ARE USED ITEM INFORMA 811 $22 CHARACTERISTICS $21 PART NUMBER +- | WEIGHT MAXIMUM VSWR :1 AT FREQUENCY (IN MAXIMUM INSERTION LOSS IN INCHES UPTO1] 1TO2 | 2TO4 | 4TO6 UPTO1) 1TO2 | 2TO4 | 4TO6 MAXIMUM SPECIFICATIONS ARE PRODUCT MAXIMUM PLUS MEASURING SYSTEM SEA LEVEL AND 20 TO 80% RELATIVE HUMIDITY. SPECIFICATIONS APPLY AT 5 TO 99% AT OTHER CONDITICNS. Q-FLEX IS A REGISTERED TRADEMARK OF TENSOLITE CO. VISIT OUR WEB SITE AT htip:/Awww.tensolite.com COPYRIGHT 2004 TENSOLITE. DATA SUBJECT TO CHANGE file V:\Andover\Techinfo\Data Sheets\Technical\Cable Assemblies\1 G7G7\5611014 REV: 05/25/04