MITSUBISHI <ANALOG ASSP> M5248P/MS286P 4-UNIT 1.5A DARLINGTON CURRENT DRIVER DESCRIPTION The M5248P/M5286P, 4-channel sink driver, consists of 4 PNP and 14 NPN transistors to form high current gain driver pairs. PIN CONFIGURATION (TOP VIEW) NA Vee TH 6) come2 FEATURES a a4 i os High output sustaining voltage to 80V (M5248P)/60V ol (M5286P) int Bi{>o fo< pia] na @ High output current to 1.54 4 3] Integral diodes for transient suppression GND { 5 iy GND @ Micro Computer Compatible input. @ Wide operating temperature range (Tg = -40 ~ +85C) IN2 [eld >>, o<pii]} IN3 APPLICATION o vy 10] : Relay and printer driver, LED or incandescent display digit Voce [a] 9] COM! driver Outline 16P4 FUNCTION The M5248P/M5286P is comprised of four PNP invertors with 6.5k series input resistors and NPN darlington sink drivers. Each output has an integral diode for inductive load transient suppression and the anodes of the diode connected to pins 9 and 16. The outputs are capable of sinking 1.5A and will withstand 80V (M5248P)/60V (M5286P) in the OFF state. CIRCUIT DIAGRAM GND Unit: Q 9 MITSUBISHI 966 ELECTRIC MITSUBISHI <ANALOG ASSP> M5248P/MS5286P 4-UNIT 1.5A DARLINGTON CURRENT DRIVER ABSOLUTE MAXIMUM RATINGS (Ta=25T, unless otherwise noted) Symbol Parameter Conditions Ratings Unit Vcc Supply voltage 20 Vv Voce Output sustaining voltage Transistor OFF 80 (M5248P) /60(M5286P) v vi input voltage 20 Vv lo Collector current Transistor ON 1.5 A Ve Clamp diode reverse voltage 80 Vv {Ee Ciamp diode forward current 1.5 A Pd Power dissipation GND with Cu foil (900mm, 354 m) 2.7 Ww Topr Operating ambient temperature range ~40~ +85 c Tstg Storage temperature range =55~ +125 c RECOMMENDED OPERATIONAL CONDITIONS (ta=40~ +85 unless otherwise noted) Symbol Parameter Test conditions Limits Unit Min Typ Max Ve Supply voltage 4 5 6 Vv Vo Output voltage 0 eo iMeaeee(/ Vv lo Collector current 0 1.25 A VR Clamp diode reverse voltage 0 Zo(Mszaer/ Vv IF Clamp diode forward curent 0 | 1.25 A Pd Power dissipation 0 | 1.0 Ww ELECTRICAL CHARACTERISTICS (ta= 40~ +85 unless otherwise noted) Limits [ Symbol Parameter Test conditions Min Typ Max Unit V(BR)CEO| Output sustaining voltage loeo = 100KA BO eae / : v IocH Supply current (OUTPUT H") Voc =6V. Vi=Vecc 10.9 uA loot Supply current (OUTPUT L"} Voo=6V, V/=0.5V 3.0 mA vV=4v Ic=1.25A 1.4 1.8 VCE (sat) Output Saturation voltage Vi=0.5V io=0.7A Lo 23 Vv Vi=Voc3.5V 0.6 ly {nput current + mA Vi=Voo6V | 1.2 1 o(eak) Output leak current V=80V, Ta=85T (M5248P) /V =60V, Ta=85T (M5286P) 100 uA IR Clamp diode leak current Vr =80V (M5248P) /VR=60V(MS286P) 50 uA VR Clamp diode reverse voltage IR= 100KA ao rmeoaeP / . Vv VEE Clamp diode forward voltage lp =1.25A 1.6 2.0 Vv Diy DC forward current gain Veco =4V, Vor =4V, ic=I1A 4000 _ VIL H Input voltage lodeak) = 50nA Voo-1.3 Vv Vit L" Input voltage Ic=1.25A Voco-3.5 Vv MITSUBISHI ae 967 MITSUBISHI <ANALOG ASSP> M5248P/M5286P 4-UNIT 1.5A DARLINGTON CURRENT DRIVER TYPICAL CHARACTERISTICS INPUT CURRENT |, (mA) POWER DISSIPATION Pg (mW) OUTPUT SATURATION VOLTAGE Veejsat) (V) THERMAL DERATING nn 2 N \ 0 50 100 150 AMBIENT TEMPERATURE Ta (C) INPUT CURRENT VS. AMBIENT TEMPERATURE Vcc =6V Vi=Vec6V Vi=Veco3.5V agQoo90 NW ana = 1 -40 -20 0 20 40 60 758085 AMBIENT TEMPERATURE Tg (C) OUTPUT SATURATION VOLTAGE VS. OUTPUT CURRENT 100 TOF Voc=4V 50F vizo.sv 30 20 0.0 7.0 5.0 3.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.002 23 0.01 0.1 1 OUTPUT CURRENT Igyz (A) SUPPLY CURRENT lee (mA) OUTPUT SATURATION VOLTAGE Vcetsat) (V) FORWARD CURRENT Ir (A) oO : NOON NWO NW ON NWO 100 FV: ==0. 5V MY wWwFONS SUPPLY CURRENT VS. AMBIENT TEMPERATURE 2 Voc=6V Ny whon 1 40 20 0 20 40 60 80 AMBIENT TEMPERATURE Ta (C) OUTPUT SATURATION VOLTAGE VS. AMBIENT TEMPERATURE louT=1.25A Voc =4.0V Vi =0.5V 40-20 0 20 40 60 80 100 AMBIENT TEMPERATURE Ta (C) CLAMP DIODE CHARACTERISTICS 1 G Ta=40, +25, +85 0 0.5 1.0 1.5 2.0 2.5 FORWARD VOLTAGE Ve (V) oe