SEK
6 09 18 506 321*
10 09 18 510 321*
14 09 18 514 321*
16 09 18 516 321*
20 09 18 520 321*
26 09 18 526 321*
34 09 18 534 321*
40 09 18 540 321*
50 09 18 550 321*
60 09 18 560 321*
64 09 18 564 321*
7
6
5*
09 18 000 99055)
SEK IEC 60 603-13
09
.
12
6 09 18 506 323 6
10 09 18 510 323 10
14 09 18 514 323 14
16 09 18 516 323 16
20 09 18 520 323 20
26 09 18 526 323 26
34 09 18 534 323 34
40 09 18 540 323 40
50 09 18 550 323 50
60 09 18 560 323 60
64 09 18 564 323 64
15.2 12.78 2.54 x 2 = 5.08
20.3 17.86 2.54 x 4 = 10.16
25.4 22.94 2.54 x 6 = 15.24
27.9 25.48 2.54 x 7 = 17.78
33.0 30.56 2.54 x 9 = 22.86
40.6 38.18 2.54 x 12 = 30.48
50.8 48.34 2.54 x 16 = 40.64
58.4 55.96 2.54 x 19 = 48.26
71.3 68.66 2.54 x 24 = 60.96
84.0 81.36 2.54 x 29 = 73.66
89.1 86.44 2.54 x 31 = 78.74
No. of
Identification contacts Part No. Drawing Dimensions in mm
Low-profile male header, angled solder pins
Number of contacts
6--64
For performance level 3 please specify digit
For performance level 2 please specify digit
> 0.76 µm Au (30 µinch) on request
* Not normally kept in stock
5) Order 2 per female connector
Male header with
angled solder pins
Length: 2.9 mm
Male header with
angled solder pins
Length: 4.5 mm
Solder pins for
0.9 mm dia. hole
No. of
Identification contacts Part No. Drawing Dimensions in mm
Locking lever for
female connector
with strain relief
in conjunction with low-
profile male header
When the security of
latching is required and
space is a premium,
these locking levers can
be fitted onto the strain
relief of the HARTING
female connector.
Strain relief clamp
Female connector
Low-profile male header
No. of AB E
contacts
1) Contact number 1
2) No polarization slot
for 6, 10 or 14 way male header
3) No polarization slot
for 6 way male header
4) Pitch tolerance: ± 0.1
