SPECIFICATION CONTROL DRAWING Product Revision Product Name S03-01-R-100 G Ident. Code Size1R S03-02-R-100 G Size2R S03-03-R-100 G Size3R S03-04-R-100 G Size4R S03-05-R-100 G Size5R Product Dimensions oB oC L1.75 min. min. (L0.07) 16.5 1.9 2.65 (0.650) (0.075) (0.105) 16.5 2.65 3.68 (0.650) (0.105) (0.145) 16.5 4.30 5.08 (0.650) (0.170) (0.200) 19.1 5.95 6.45 (0.750) (0.235) (0.255) 19.1 7.0 7.6 (0.750) (0.275) (0.300) H min. 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) oE max. 2.65 (0.105) 3.68 (0.145) 5.08 (0.200) 6.45 (0.255) 7.6 (0.300) Cable Dimensions oF oD min. max. 0.90 1.9 (0.035) (0.075) 1.40 2.65 (0.055) (0.105) 2.15 4.3 (0.085) (0.170) 3.30 5.95 (0.130) (0.235) 4.30 7.0 (0.170) (0.275) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. THERMAL INDICATOR: Color change violet to colorless. 3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue. 4. PRE-INSTALLED BRAID: Tin plated copper strands. CMA 640. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 125C minimum, meeting the dimensional criteria listed and having tin or silver plated shields and insulation compatible with the insert material. For compatible insulations, see MIL-S-83519/2 or consult Raychem. 2. When installed per Raychem process standard RCPS-100-70, assemblies will meet those requirements of Raychem Specification RT-1404 and MIL-S-83519/2 which do not require electrical testing while parts are immersed in water. 3. Temperature range: -55C to +150C. 4. Parts shall be marked with identification code per table. For best results, prepare the cable as shown: SolderSleeves a trademark of TE Connectivity. THERMOFIT DEVICES TE Connectivity 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend 0.00 N/A this drawing at any time. Users should 0.0 N/A ROUGHNESS IN evaluate the suitability of the product for 0 N/A MICRON their application. TITLE: SOLDERSLEEVE DEVICE SHIELD TERMINATION WITH BRAID DOCUMENT NO.: S03-0X-R-100 DCR NUMBER: REPLACES: D990968 DRAWN BY: DATE: PROD. REV. DOC ISSUE: SCALE: M. FORONDA 11/22/99 SEE TABLE 6 None Print Date: 11-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision. D990118 SIZE: A SHEET: 1 of 1