Technical Data Sheet Right Angle Lens Chip LEDs with Bi-Color(Multi-Color) 12-22/R6GHC-A33/2C Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Pb-free. The product itself will remain within RoHS compliant version. Descriptions The 12-22 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide Chip Emitted Color Type Material R6 AlGaInP Brilliant Red GH InGaN Brilliant Green Resin Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 1 of 12 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 12-22/R6GHC-A30/2C Package Outline Dimensions Note: The tolerances unless mentioned is 0.1mm,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 2 of 12 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 12-22/R6GHC-A30/2C Absolute Maximum Ratings (Ta=25 ) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF Peak Forward Current (Duty 1/10 @1KHz) IFP R6:25 mA GH:25 R6:60 mA GH:100 R6:60 Power Dissipation Pd mW Electrostatic Discharge(HBM) ESD Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +90 Soldering Temperature Tsol GH:95 R6:2000 V GH:150 Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 3 of 12 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 12-22/R6GHC-A30/2C Electro-Optical Characteristics (Ta=25 ) Parameter Luminous Intensity Viewing Angle Peak Wavelength Symbol Min. Typ. Max. Iv R6 72.0 ---- 180 GH 112 ---- 285 ----- 120 ----- deg ----- nm 21/2 p R6 ----- GH Dominant Wavelength d R6 Forward Voltage Reverse Current 518 ----- 517.5 R6 ----- 633.5 529.5 ----nm 35 GH IR R6 1.7 2.0 2.4 GH 2.7 3.3 3.7 ----- ----- R6 IF=20mA 20 ----- VF Condition mcd nm GH Spectrum Radiation Bandwidth 617.5 632 Unit V 10 A VR=5V 50 GH Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 4 of 12 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 12-22/R6GHC-A30/2C Bin Range Of Luminous Intensity R6 Bin Min Max Q 72.0 112 R 112 180 Bin Min Max R 112 180 S 180 285 Unit Condition mcd IF=20mA Unit Condition mcd IF=20mA GH Bin Range Of Dom. Wavelength R6 Group A Bin Min Max E4 617.5 621.5 E5 621.5 625.5 E6 625.5 629.5 E7 629.5 633.5 Bin Min Max B10 517.5 519.5 B11 519.5 521.5 B12 521.5 523.5 B13 523.5 525.5 B14 525.5 527.5 B15 527.5 529.5 Unit Condition nm IF =20mA Unit Condition nm IF =20mA GH Group C Notes: 1.Tolerance of Luminous Intensity 11% 2. Tolerance of Dominant Wavelength: 1nm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 5 of 12 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 12-22/R6GHC-A30/2C Typical Electro-Optical Characteristics Curves R6 Ta=25C Forward Current I (mA) Relative luminous intensity ( % ) Ta=25C Wavelength (nm) Forward Voltage VF (V) Relative luminous intensity ( %) Relative luminous intensity ( % ) Ta=25C Ambient Temperature Ta(C ) Forward Current I (mA) Ta=25C 10 20 I (mA) 0 Forward Current 30 40 1.0 0.9 50 0.8 60 70 0.7 80 90 Ambient Temperature Ta (C ) 0.5 0.3 0.1 0.2 0.4 0.6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 6 of 12 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 12-22/R6GHC-A30/2C Typical Electro-Optical Characteristics Curves GH Ta=25C Forward Current I (mA) Relative luminous intensity ( % ) Ta=25C Wavelength (nm) Forward Voltage VF (V) Relative luminous intensity ( %) Relative luminous intensity ( % ) Ta=25C Ambient Temperature Ta(C ) Forward Current I (mA) Ta=25C 0 10 20 I (mA) 30 Forward Current 40 1.0 0.9 50 0.8 60 70 0.7 80 90 Ambient Temperature Ta (C ) 0.5 0.3 0.1 0.2 0.4 0.6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 7 of 12 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 12-22/R6GHC-A30/2C Label explanation CAT: Luminous Intensity Rank Pb HUE: Dom. Wavelength Rank CPN : P N : XXXXXXXXXXXXX REF: Forward Voltage Rank XXXXXXXXXXXXX EVERLIGHT RoHS CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is 0.1mm, Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 8 of 12 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 12-22/R6GHC-A30/2C Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is 0.1mm, Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 9 of 12 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 12-22/R6GHC-A30/2C Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 2605 Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100 15min 5 min L : -40 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100 5min 10 sec L : -10 5min 300 Cycles 22 PCS. 0/1 Temp. : 100 1000 Hrs. 22 PCS. 0/1 Temp. : -40 1000 Hrs. 22 PCS. 0/1 2 3 High Temperature Storage Low Temperature Storage 4 5 Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 10 of 12 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 12-22/R6GHC-A30/2C Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 11 of 12 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao 12-22/R6GHC-A30/2C 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 12 of 12 Device No. Prepared date: 30-Jun-2011 Prepared by: Haizheng Gao