RoHS Compliant MMIC Medium Level Mixer 1700 - 2000 MHz MAMXSS0010 V2 Features * * * * * * * * * * Functional Diagram Low Conversion Loss Input Power @ 1 dB Compression: +21 dBm Typical Two-Tone IM Ratio: > 50 dBc LO Drive Level: +11 to +23 dBm DC - 200 MHz IF Bandwidth Lead-Free SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free "Green" Mold Compound 260C Reflow Compatible RoHS* Compliant Version of MD54-0003 C L R 8 7 6 5 1 2 3 4 Description M/A-COM's MAMXSS0010 is a passive mixer that achieves the performance of a double balanced diode mixer in a lead-free surface mount plastic SOIC-8 package. The MAMXSS0010 is ideally suited for use where high level RF signals and very wide dynamic range are required. Typical applications include frequency up/down conversion, modulation, demodulation in systems such as base station receivers and transmitters for DCS1800, PCS and PHS applications. The MAMXSS0010 uses FETs as mixing elements to achieve very wide dynamic range in a low cost plastic package. The mixer operates with LO drive levels of +11 dBm to +23 dBm. No DC bias is required. External matching network on LO Port: R = 330 ohms, L = 3 nH, C = 3.3 pF Pin Configuration Pin No. Function Pin No. Function 1 Ground 5 Ground 2 RF Port 6 LO Port 3 Ground 7 IF Port 4 Ground 8 Ground M/A-COM's MAMXSS0010 is fabricated using a mature 1-micron GaAs process. The process features full IC passivation for increased performance and reliability. Ordering Information Part Number Package MAMXSS0010 Bulk Packaging MAMXSS0010TR 1000 piece reel MAMXSS0010SMB Designer's Kit Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant MMIC Medium Level Mixer 1700 - 2000 MHz MAMXSS0010 V2 Electrical Specifications: Test Conditions: RF = 1850 MHz (-10 dBm), LO = 1710 MHz (13 dBm), IF = 140 MHz, TA = +25C Parameter Test Conditions Units Min Typ Max Conversion Loss -- dB -- 8.5 9.5 Isolation LO to RF LO to IF RF to IF dB dB dB -- -- -- 27 12 10 -- -- -- VSWR LO Port RF Port IF Port Ratio Ratio Ratio -- -- -- 2.5:1 2.0:1 2.0:1 -- -- -- RF Freq. = 1800 MHz, LO = +13 dBm dBm -- +21 -- Two tones at -10 dBm each, Tone spacing 100 kHz, IF = 140 MHz dBc 50 65 -- Input 1 dB Compression 1 Two-Tone IM Ratio 1. IMR vs RF drive level can be calculated by the formula: IMR = 50 - (1.5 x P IN ) Spurious Table Absolute Maximum Ratings2,3 4x 17 6.9 48.2 47.2 62.3 61.1 71.7 61.7 73.4 63.4 RF Input Power4 +22 dBm 3x 4 +23 dBm 10.3 0.3 28.9 28.9 63.0 61.3 71.3 63.5 70.6 61.6 2x -8.8 -18.8 -25.7 25.9 52.1 61.3 71.5 61.5 72.1 62.1 1x -13.1 -23.1 0 0 67.5 61.1 71.3 61.9 72.6 62.6 0x X X 2.1 2.1 56.8 61.7 72.3 62.3 69.3 59.8 0x 1x 2x 3x 4x LO Drive Power Operating Temperature -40C to +85C Storage Temperature -65C to +150C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. Total combined power for RF and LO ports should not exceed +23 dBm. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Harmonic of LO Absolute Maximum Parameter Harmonic of RF The spurious table shows the spurious signals resulting from the mixing of the RF and LO input signals, assuming down conversion. Mixing products are indicated by the number of dB below the conversion loss. The lower frequency mixing term is shown for two different RF input levels. The top number is for an RF input power of -5 dBm, the lower number is for -15 dBm. |mFRF - nFLO |, RF = -5 dBm |mFRF - nFLO |, RF = -15 dBm RF Frequency = 1850 MHz LO Frequency = 1710 MHz Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant MMIC Medium Level Mixer 1700 - 2000 MHz MAMXSS0010 V2 Typical Performance Curves Isolation Conversion Loss 30 11 25 10 20 15 9 10 8 RF TO IF LO TO IF LO TO RF 5 7 1700 1750 1800 1850 1900 1950 0 1700 2000 1750 1800 1850 1900 1950 2000 RF Frequency (MHz) RF Frequency (MHz) RF, LO and IF VSWR Input P1dB IF Frequency (MHz) 0 25.0 50 100 150 200 250 300 1850 1900 1950 2000 5 LO RF IF 4 22.5 3 20.0 2 17.5 1 15.0 1700 1750 1800 1850 1900 1950 0 1700 2000 RF Frequency (MHz) 1750 1800 RF Frequency (MHz) Lead-Free SOIC-8 Reference Application Note M538 for lead-free solder reflow recommendations. 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.