One smart printer to print it all
1
www.bradyeurope.com
Content
BMP™71 Label Printer & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
High Performance Industrial Identification / Safety Identification . . . . . . . 10
General and Industrial Identification Labels . . . . . . . . . . . . . . . . . . . . . . 11
Wire And Cable Marking ...................................16
Electrical Component Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Datacom Labels .........................................23
Circuit Board and Component Identification Labels . . . . . . . . . . . . . . . . . 27
Security Identification Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Laboratory Identification Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Brady products are sold on the condition that the purchaser will test them in actual use and determine for
himself/herself their suitability to his/her intended purpose Brady warrants to the purchaser that Brady
products are free from defects in material and workmanship but limits its obligation under this warranty
to the replacement of the product which has been shown to Brady’s satisfaction to have been defective
at the time of its purchase.
The warranty does not extend to any persons who have acquired the product from the purchaser. It is
in lieu of any other warranty, including every warranty of sale-ability, marketability or suitability for the
intended purpose, and is also in lieu of any other obligation or liability on the part of Brady.
Under no circumstances will Brady be liable for losses, damage, costs or subsequent damage of whatever
nature which may arise in connection with the use of, or inability to use, Brady’s products.
www.bradyeurope.com 2
The BMP71 mobile label printer can print on more than 30 different types of
label material – all designed with Brady’s industrial-strength durability.
Whether you need heat shrink sleeves, die-cut labels or indoor/outdoor vinyl,
you can be confident that the BMP71 printer has the right label material for
your application.
Speed up your labelling
The powerful BMP71 prints faster than any other printer in it’s class (38 mm/sec). Don’t wait longer than necessary
for your labels.
The full keyboard lets you type labels in less time
The BMP71 has a full keyboard, available in 4 different versions: QWERTY, AZERTY, QWERTZ and CYRILLIC.
Use both your hands to type your label instead of one finger and save time!
The enlarged full colour screen makes your label printing so much easier
The enlarged screen of the BMP71 enables to see the whole label at once, helping you to compose the label in the
most efficient way, eliminating trial and error!
One smart printer to print it all
The BMP71 is your essential tool that handles all your label printing needs.
Order Reference Description
BMP71-QWERTY-UK Printer, Hard Carry Case, 2 Label Rolls, 1 Black Ribbon Cartridge,
Rechargeable Battery Pack, AC Adaptor, USB Communications Cable,
TLS2200® / HandiMark™ Material Roll Adaptor, Quick Start Guide,
Product CD (w/ Printer Driver, Tutorials, Full User’s Guide), Cleaning Kit
BMP71-QWERTY-EU As above but with European Power Supply
BMP71-AZERTY-EU As above but with AZERTY Keyboard and European Power Supply
BMP71-QWERTZ-EU As above but with QWERTZ Keyboard and European Power Supply
BMP71-CYRILLIC-EU As above but with CYRILLIC Keyboard and European Power Supply
M71-AC-EU BMP71 European AC
M71-AC-UK BMP71 UK AC
M71-QC-EU BMP71 European Quick Charger
M71-QC-UK BMP 71 UK Quick Charger
M71-HC BMP71 Hard Carry Case
M71-SC BMP 71 Soft Carry Case
M71-AC-BC BMP71 AC/BATTERY CHARGER
M71-BATT BMP71 SPARE BATTERY
M71-CLEAN BMP71 CLEANING KIT
M71-ADAPT BMP71 ROLL ADAPTER FOR TLS/HM
BMP™71 Label Printer
3
www.bradyeurope.com
Features – Printing Options
Printer
• Large full colour graphic LCD screen
• Display communicates important status information:
• Installed label part
• Label size and colour
• Amount of material remaining
• Remaining battery charge
• Label and area status
• Current font size and rotation
• Thermal transfer printing mechanism - 300 dpi
• High print speed of 38 mm/sec
• Weight : 2.5kg (w/battery)
• Handle to easily carry the printer anywhere you need it
• Built in industrial label cutter
• Print width 46 mm - Print length up to 1016 mm
• Stand alone or PC connectivity via USB
• Durable hard carry case
• Operating temperature range: 4° to 49°C
Labels
• The pre-defined application templates and wizards save
time and make it easy to print the exact label you need
• Adjustable to six different widths of labels
• Can print up to 25 lines per label
• Batch label printing or print multiple copies of one label
• Ability to serialise data
• Prints mirror image
• Built-in Smart Cell Technology in labels and ribbons
Memory
• Ability to store, retrieve and delete label files
• Save over 100,000 labels!
• Built in time/date stamp
Battery
• Prints 4000 labels per battery charge
(25, 40 to 50 mm labels)
• Rechargeable Battery and AC power/battery charger
• Sleep mode conserves battery power when printer
is not in use
• UL and CUL listed battery charger
Symbols & Barcodes
• Standard electrical and datacom symbols included
• Barcode symbologies: Code 39 and Code 128
• Over 500 built in graphics
Text
• Auto font sizing
• Custom True Type Font
• Text size 4 pt to 174pt (scaleable)
Label part number
Font size
Number of labels in
print file
Label size
Label rotation
Number of areas
on current label
Labels remaining
Battery charge remaining
Ribbon remaining
Pre-defined application templates
Prints all TLS2000® and Handimark™
label parts including bulk rolls.
Users interested in upgrading to
BMP™71 Printer, do not need to invest
in a new set of consumables.
www.bradyeurope.com 4
Software
Easy way to create labels on your PC
with LabelMark™ Labelling Software
Brady’s LabelMark™ software lets you easily create
labels for Asset ID, Component Marking, Telecom/
Datacom Labelling, Wire Markers and more.
It allows users to design, edit and print their Brady
labels. Integrates completely with Microsoft®
Office, AutoCAD® applications and more.
Enhance your labels with advanced
graphics and symbols with
MarkWare™ software
With Brady’s MarkWare™ software you can
combine text with graphics, symbols and
barcodes. Labels can be used as visual tools
throughout your facility. For lean enterprises,
Brady’s MarkWare™ software provides
additional graphics and templates for Signs,
Labels, Pipe Markers and Tags - perfect for
5S, TPM and lean visuals.
Quick & Easy Label Design
• Includes label template designs. The size of the template
adjusts automatically to the size of the installed material,
regardless of width
• Over 600 standardised symbols available
• Ability to import drawings, signs and diagrams
• Supports European CLP Hazardous Substances
Identification labels containing GHS and ADR graphics
• Creation of pipe markers guaranteeing compliance based
on your choice of national standard
• 5 Barcode protocols and 19 languages
Label Editing
• Advanced functions allow quick label creation
(“align objects”, “group objects”, foreground/
background, zoom, rotation…)
• Employs all the basic functions of Windows®
applications (copy/paste within the application
print preview, etc …).
Label Printing
• Windows®-compatible print driver included
• Windows® print driver adds the Brady printer
to your printer list. This authorises printing
directly from other software such as drawing
and other widely used creative programs
Easy to Use Graphical Interface Label Design
• Option for line-edit or free-form mode for label design
• Several common barcode symbologies available
• Ability to import graphical images
• Data import support including spreadsheets, ASCII, ODBC and OLE DB
Label Editing
• Easy to use single screen editing
• Multiple document interface for working with different labels at the same time
• Ability to flip/flop data on label (i.e. flip/flop “to”/“from” order)
Label Printing
• Compatible with all Brady media, stock and custom formats
• Works with a variety of different printers to suit various applications
5
www.bradyeurope.com
Applications
Patch Panel ID
Terminal Block
Markers
Face Plate ID
Wire & Cable
Self-Laminating Labels
Wire & Cable
Wrap Around Labels
Wire & Cable Sleeves
Tag Printing
Electrical Panel ID
Desi-Strip Inserts Flag Labels
www.bradyeurope.com 6
Applications
Logistics Labelling Pipe Marking
Asset ID
Circuit Board &
Component Labelling
Industrial
Barcode Labelling Security ID
Laboratory ID Information Signs
Safety Identification
7
www.bradyeurope.com
Materials and Ribbons Cross Reference Chart
Material
Number
Material
Description
Colour Finish Min./Max.
Service
Temperature
Application Special Properties Agency
Approvals/
Compliance
Recommended
Ribbons
Nylon Cloth
B-499 Nylon Cloth with permanent
acrylic pressure sensitive
adhesive
White Matt -70° to 90°C
30 days
Low profile through-conduit wire
marking, component and general
labelling
High adhesion makes all-purpose wire
marker ideal for environments where
heat, oil and dirt are present
M71-R4300
Paper
B-424 General Purpose Paper with
permanent latex adhesive
White Matt -40° to 50°C
30 days
Barcode and general labelling Good contrast and smear resistance
M71-R4300
Polyester
B-422 Polyester with permanent
acrylic adhesive
White Gloss -40° C to 100°C
30 days
Electronic PCB ID and component,
barcode label and rating plate,
outlet and patch panel ID
2 mil adhesive recommended for
application on textured surfaces
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
B-423 Polyester with permanent
acrylic adhesive
White Gloss -40°C to 120°C
30 days
Electronic PCB ID and component,
barcode label, rating plates and
outlets
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
B-428 Metallised polyester with
permanent acrylic adhesive
Silver Matt -40°C to 120°C
30 days
Rating plates, electronic
component marking
M71-R4300
B-430 Clear polyester with
permanent acrylic adhesive
Clear Gloss -70°C to 100°C
30 days
General labelling rating/name
plates, outlet and general
communications
High adhesion make it ideal for highly
textured and other surfaces that are
difficult to adhere to; Translucent
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
B-459 Polyester with permanent
acrylic adhesive
White Matt -40°C to 110°C
30 days
Electronic PCB ID and component,
barcode labelling and rating plates
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
B-461 Self-laminating polyester with
permanent acrylic adhesive
White/
Translucent
Matt -196°C to 130°C
30 days
Laboratory ID Excellent abrasion and smudge
resistance
M71-R4300
M71-R6200
B-473 Polyester with static
dissipative permanent
acrylic adhesive
White Gloss -40°C to 120°C
30 days
Electronic PCB ID and component,
barcode labelling and rating plates
Static dissipative adhesive and liner
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
B-483 Polyester with permanent
rubber adhesive
White Gloss -40°C to 120°C
30 days
General labelling; barcode label
and rating plates
Ultra-aggressive adhesive for thermal
transfer printing, designed for powder
coated surfaces
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
B-486 Polyester with permanent
rubber adhesive
Silver Matt -40°C to 120°C
30 days
General labelling; barcode label
and rating plates
Metallised polyester with ultra-aggresive
adhesive for oily, greasy and powder-
coated surfaces
M71-R4300
B-488 Polyester with permanent
acrylic adhesive
White Matt -40°C to 160°C
30 days
Electronic PCB and component;
barcode label and rating plates
High performance matt white
M71-R4300
M71-R6200
B-489 Polyester with permanent
rubber adhesive
White Matt -40°C to 120°C
30 days
General labelling, barcode
labelling and rating plates
Ultra-aggresive adhesive for oily, greasy
and powder coated surfaces; UL/CSA
approval pending
M71-R6200
B-582 BradyGlo™ Polyester with
acrylic adhesive
Phosphorescent
Gloss -40°C to 80°C Photoluminescent safety
identification
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
B-7593 EPREP: polyester tag on foam
carrier with permanent acrylic
adhesive
White, Yellow,
Red, Green,
Silver, Black
Gloss -40°C to 100°C
30 days
Electrical components, switches,
push buttons, rack and patch
panels
650 µm thick material with foam tape to
replace engraved name plates; colour
match available on demand
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
Polyethylene
B-109 Polyethylene tag White Matt -40°C to 80°C
30 days
Multi-purpose identification tag,
where durability is required
Cross-laminated polyethylene provides
extreme tear resistance and excellent
cold-weather performance
M71-R4300
B-145 Polyethylene tag Grey Matt -40°C to 100°C
30 days
Power and ground labels Tear-resistant 2-sided printable tag
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
B-145FR Flame retardant rigid
polyethylene tag
Grey Matt -40°C to 100°C
30 days
Power and ground labels Tear-resistant 2-sided printable tag
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
B-7599 Polyethylene tag White Matt -40°C to 50°C
30 days
Multi-purpose identification tag 250 µm polyethylene tag
M71-R6200
Polymide
B-426 Polymide with permanent
acrylic adhesive
Amber Matt -70°C to 330°C
80 sec.
Underside PCB and other high
temperature, high performance
applications
Withstands extremely high
temperatures
M71-R4300
B-477 Polymide with static
dissipative permanent
acrylic adhesive
White Gloss -70°C to 300°C
80 sec.
Top- or bottom-side board
application for SMT or
Through hole
Static dissipative adhesive and liner
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
B-478 Polymide with static
dissipative permanent
acrylic adhesive
White Gloss -70°C to 300°C
80 sec.
1 mil low profile top- or bottom-
side board application for SMT or
Through hole
Static dissipative adhesive and liner
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
*R-6900 ribbon comes in red, green, magenta, yellow and blue
These materials have
static dissipative adhesives
These materials are
CSA approved.
These materials are
UL recognised
Halogen-Free
(DIN VDE 0472/parts 815)
www.bradyeurope.com 8
Materials and Ribbons Cross Reference Chart
Material
Number
Material
Description
Colour Finish Min./Max.
Service
Temperature
Application Special Properties Agency
Approvals/
Compliance
Recommended
Ribbons
Polyolefin
B-341 PermaSleeve™ heat shrink
polyolefin sleeves
White, Yellow Matt -40°C to 130°C
1000 hours
Wire marking 2-to-1 shrink ratio, self-extinguishing,
meets the material and physical property
of AMS-DTL-23053/5 Class 1,
SAE AS-81531, MIL-STD-202,
Method 215 and UL 224
M71-R4300
B-342 PermaSleeve™ heat shrink
polyolefin sleeves
White, Yellow Matt -55°C to 130°C
1000 hours
Wire marking 3-to-1 shrink ratio, self-extinguishing,
meets the material and physical property
of AMS-DTL-23053/5 Class 1,
SAE AS-81531, MIL-STD-202,
Method 215 and UL 224
M71-R4300
Polypropylene
B-412 Polypropylene tag White Matt -40°C to 100°C
30 days
Wire, cable and product inventory
information
Designed where tensile strength is
needed
M71-R6200
B-425 Polypropylene with acrylic
adhesive
White Matt -40°C to 100°C
30 days
Cable and wire markers,
P- and T-labels
Excellent abrasion and smudge
resistance
M71-R4300
B-529 Economy polypropylene with
acrylic adhesive
Whit Gloss -40°C to 100°C Low-cost choice for indoor use
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
Tedlar®
B-437 Tedlar® with permanent
acrylic adhesive
White, Yellow Matt -70°C to 135°C
30 days
Aerospace and military cable
marking
Self-extinguishing
M71-R4300
B-642 Tedlar® with permanent
acrylic adhesive
White Matt -70°C to 120°C
30 days
Self-laminating, wire and cable
marking
Self-extinguishng, low smoke and flame
spread, excellent abrasion and smudge
resistance
M71-R4300
Thermoplastic Polyether-polyurethane (PUR)
B-7643 Thermoplastic polyether
polyurethane tag
White, Yellow Matt -40°C to 90°C
30 days
Wire & cable marking Zero halogen, more colours available
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
Vinyl
B-352 Vinyl with permanent acrylic
adhesive
Silver Matt -40°C to 80°C
30 days
Tamper-resistant labels for
security ID; asset ID
Metallised vinyl, designed to fracture
easily
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
B-427 Self-laminating vinyl with
permanent acrylic adhesive
White Matt -70°C to 70°C
30 days
Self-laminating wire and cable
marking
Excellent abrasion and smudge
resistance
M71-R4300
B-530 Tamper evident vinyl with
acrylic adhesive
White Gloss -40°C to 90°C Tamper-resistant labels for
security ID; asset ID
Designed to fracture easily
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
B-580 High Performance vinyl with
permanent acrylic adhesive
Red, Yellow,
Blue, Green,
White,
Orange, Grey,
Black, Brown,
Purple, Clear,
Gold, Ochre,
Sky Blue,
Light Blue,
Pink, Tan
Gloss -40°C to 82°C Safety identification, pipe marking 5-year average outdoor durability
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
B-584 Reflective vinyl with acrylic
adhesive
White, Yellow,
Orange
Gloss -40°C to 82°C Reflective quality makes material
ideal for use in low-light
conditions
5-year average outdoor durability
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
B-581 Repositionable vinyl with
acrylic adhesive
White, Yellow Gloss -40°C to 82°C Indoor labels where frequent
repositioning is required
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
B-7696 Rigid vinyl tag,
Rigid Durasleeve
White Gloss -40° C to 70°C
30 days
Sleeves, inserts, tags, terminal
block markers
Rigid construction
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
Vinyl Cloth
B-498 Vinyl cloth with repositionable
rubber based adhesive
White Semi-
gloss
-40°C to 82°C
30 days
Wire and electronic component
marking
Repositionable adhesive
M71-R6200
For more information on our materials or to help you choose,
visit www.bradyeurope.com
Tedlar® is a registered trademark of DuPont
*R-6900 ribbon comes in red, green, magenta, yellow and blue
Brady has hundreds of RoHS compliant materials
for you to choose from and we are committed to
provide you with the latest information. Simply
go to www.weeerohs.bradyeurope.com for the
latest up-date.
These materials have
static dissipative adhesives
These materials are
CSA approved.
These materials are
UL recognised
Halogen-Free
(DIN VDE 0472/parts 815)
9
www.bradyeurope.com
Ribbons
Ribbons
Order Reference Colour Ribbon
Width (mm)
Ribbon
Length (m) Special property
M71-R4300 Black 50.80 46 Strong environmental resistance against smearing and chemicals. Reliable, sharp-edge print quality to
maximize bar code readability.
M71-R4400-WT White 50.80 46 High density ribbon with excellent solvent resistance, high heat resistance, and super scratch resistance.
M71-R6000 Black 50.80 46 High density ribbon with excellent solvent resistance, high heat resistance, and super scratch resistance.
M71-R6200 Black 50.80 46 Designed for harsh environment labeling applications. Superior abrasion, chemical and heat resistance.
M71-R6400 Black 50.80 46 High density ribbon with excellent solvent resistance, high heat resistance, and super scratch resistance.
M71-R6800-WT White 50.80 46 Strong environmental resistance against smearing and chemicals. Reliable, sharp-edge print quality to
maximize bar code readability.
M71-R6900-BL Blue 50.80 46 High density ribbon with excellent solvent resistance, high heat resistance, and super scratch resistance.
M71-R6900-GN Green 50.80 46 High density ribbon with excellent solvent resistance, high heat resistance, and super scratch resistance.
M71-R6900-MA Magenta 50.80 46 High density ribbon with excellent solvent resistance, high heat resistance, and super scratch resistance.
M71-R6900-RD Red 50.80 46 High density ribbon with excellent solvent resistance, high heat resistance, and super scratch resistance.
M71-R6900-YL Yellow 50.80 46 High density ribbon with excellent solvent resistance, high heat resistance, and super scratch resistance.
Bulk Packaging
Bulk labels are designed for the BMP™71 Label Printer as a cost-effective solution for high volume labelling needs.
Order references beginning with “B” indicate bulk rolls.
www.bradyeurope.com 10
High Performance Industrial Identification / Safety Identification
Diagram Order Reference Width A (mm) Length B (m) Colour
M71C-500-580-WT 12.70 15.24 White
M71C-500-580-YL 12.70 15.24 Yellow
M71C-500-580-GN 12.70 15.24 Green
M71C-500-580-RD 12.70 15.24 Red
M71C-500-580-BL 12.70 15.24 Blue
M71C-500-580-LB 12.70 15.24 Light Blue
M71C-500-580-SB 12.70 15.24 Sky Blue
M71C-500-580-OR 12.70 15.24 Orange
M71C-500-580-BK 12.70 15.24 Black
M71C-500-580-GY 12.70 15.24 Grey
M71C-500-580-BR 12.70 15.24 Brown
M71C-500-580-GD 12.70 15.24 Gold
M71C-500-580-OC 12.70 15.24 Ochre
M71C-500-580-PL 12.70 15.24 Purple
M71C-500-580-PK 12.70 15.24 Pink
M71C-500-580-TN 12.70 15.24 Tan
M71C-500-580-CL 12.70 15.24 Clear
M71C-1000-580-WT 25.40 15.24 White
M71C-1000-580-YL 25.40 15.24 Yellow
M71C-1000-580-GN 25.40 15.24 Green
M71C-1000-580-RD 25.40 15.24 Red
M71C-1000-580-BL 25.40 15.24 Blue
M71C-1000-580-LB 25.40 15.24 Light Blue
M71C-1000-580-SB 25.40 15.24 Sky Blue
M71C-1000-580-OR 25.40 15.24 Orange
M71C-1000-580-BK 25.40 15.24 Black
M71C-1000-580-GY 25.40 15.24 Grey
M71C-1000-580-BR 25.40 15.24 Brown
M71C-1000-580-GD 25.40 15.24 Gold
M71C-1000-580-OC 25.40 15.24 Ochre
M71C-1000-580-PL 25.40 15.24 Purple
M71C-1000-580-PK 25.40 15.24 Pink
M71C-1000-580-TN 25.40 15.24 Tan
M71C-1000-580-CL 25.40 15.24 Clear
M71C-2000-580-WT 50.80 15.24 White
M71C-2000-580-YL 50.80 15.24 Yellow
M71C-2000-580-GN 50.80 15.24 Green
M71C-2000-580-RD 50.80 15.24 Red
M71C-2000-580-BL 50.80 15.24 Blue
M71C-2000-580-LB 50.80 15.24 Light Blue
M71C-2000-580-SB 50.80 15.24 Sky Blue
M71C-2000-580-OR 50.80 15.24 Orange
M71C-2000-580-BK 50.80 15.24 Black
M71C-2000-580-GY 50.80 15.24 Grey
M71C-2000-580-BR 50.80 15.24 Brown
M71C-2000-580-GD 50.80 15.24 Gold
M71C-2000-580-OC 50.80 15.24 Ochre
M71C-2000-580-PL 50.80 15.24 Purple
M71C-2000-580-PK 50.80 15.24 Pink
M71C-2000-580-TN 50.80 15.24 Tan
M71C-2000-580-CL 50.80 15.24 Clear
B-580 Indoor/Outdoor Vinyl:
• Brady’s indoor/outdoor grade vinyl tape adheres well to pipes, walls, equipment, windows – most clean, dry surfaces.
• Conforms well to irregular, curved or rough surfaces – it even stands up to grease, oil and most industrial chemicals.
• Five year average outdoor durability in temperatures from 82°C to -40°C, can be applied as low as -18°C.
Clear
Pink Tan
Black Grey Brown Gold
Ochre Purple
White Yellow Green Red
Blue Light Blue Sky Blue Orange
Order references with “C” (e.g. M71C) indicate continuous.
11
www.bradyeurope.com
General and Industrial Identification Labels
Diagram Order Reference Width A (mm) Length B (m) Colour
M71C-500-581-Yl 12.70 15.24 Yellow
M71C-500-581-WT 12.70 15.24 White
M71C-1000-581-YL 25.40 15.24 Yellow
M71C-1000-581-WT 25.40 15.24 White
M71C-2000-581-YL 50.80 15.24 Yellow
M71C-2000-581-WT 50.80 15.24 White
Repositionable Labels
• B-581 Repositionable Vinyl:
• Special adhesive allows easy removal of label to re-apply again and again.
• Best choice for indoor marking where frequent repositioning is required,
such as shelves.
Diagram Order Reference Width A (mm) Length B (m) Colour
M71C-500-584-Yl 12.70 15.24 Yellow
M71C-500-584-WT 12.70 15.24 White
M71C-1000-584-YL 25.40 15.24 Yellow
M71C-1000-584-WT 25.40 15.24 White
M71C-2000-584-YL 50.80 15.24 Yellow
M71C-2000-584-WT 50.80 15.24 White
Reflective Labels
• B-584 Reflective Vinyl:
• Ideal for reading labels in low light conditions.
For more information on our materials or to help you choose,
visit www.bradyeurope.com
Order references with “C” (e.g. M71C) indicate continuous.
Order references with “C” (e.g. M71C) indicate continuous.
www.bradyeurope.com 12
General and Industrial Identification Labels
Rating, Name Plate Labels
• B-422, B-423 Permanent Glossy Polyester
• B-424 General Purpose White Paper
• B-428 Permanent Metallised Polyester
• B-430 Permanent Clear Polyester
• B-483 Ultra-Aggresive Glossy Polyester
• B-486 Ultra-Aggresive Metallised Polyester
• B-489 Ultra-Aggresive Matt Polyester
• B-488 Matt Polyester
• B-499 Nylon Cloth
Diagram Order
Reference
Labels
Per Roll
Width
A (mm)
Height
B (mm)
Applications/
Descriptions
Max. Characters
per line
for 5 Points
Max. Lines
of Text
for 5 Points
Surface
Suitability
M71-16-483 500 25.40 9.53 Asset ID for textured surfaces 24 3
BM71-17-428 5000 25.40 12.70 General Purpose over-laminated ID 24 5
M71-17-428 500 25.40 12.70 General Purpose over-laminated ID 24 5
M71-17-483 500 25.40 12.70 Asset ID for textured surfaces 24 5
M71-17-486 500 25.40 12.70 Asset ID for oily, greasy and textured surfaces 24 5
M71-17-489 500 25.40 12.70 Asset ID for oily, greasy and textured surfaces 24 5
M71-19-423 250 25.40 25.40 Rating plate 24 10
BM71-19-423 2500 25.40 25.40 Rating plate 24 10
M71-19-483 250 25.40 25.40 Asset ID for textured surfaces 24 10
M71-20-424 100 50.80 25.40 General ID and Asset ID 46 10
BM71-20-424 1000 50.80 25.40 General ID and Asset ID 46 10
M71-20-428 100 50.80 25.40 Asset ID, silver finish 46 10
BM71-20-428 1000 50.80 25.40 Asset ID, silver finish 46 10
M71-20-483 100 50.80 25.40 Asset ID for textured surfaces 46 10
M71-20-486 100 50.80 25.40 Asset ID for oily, greasy and textured surfaces 46 10
M71-22-423 100 76.20 25.40 General ID 50 10
M71-22-428 100 76.20 25.40 Rating plate 50 10
M71-23-423 100 101.60 25.40 General ID 50 9
M71-23-483 100 101.60 25.40 Asset ID for textured surfaces 50 9
M71-24-423-BK 500 28.70 12.70 1.60 mm Black-bordered component ID 24 3
M71-26-423 100 69.85 31.75 General ID and Asset ID 50 13
M71-26-428 100 69.85 31.75 General ID and Asset ID 50 13
M71-29-428 500 38.10 12.70 Face plates, panels, equipment, silver finish 37 5
Material to Surface Cross Reference Guide
Brady material number (B-number)
Smooth
(Examples: Uncoated Metal,
Plastic, Glass)
Textured/Rough
(Examples: Textured ABS,
Cast Metal, Polycarbonate)
Highly Textured / Low Surface Energy
(Examples: Powder Coated,
Low Surface Energy ABS, Polypropylene
B-7351 B-352** B-422* B-432* YES YES NO
B-435* B-427** B-580
B-483* B-486* B-489* B-499* YES YES YES
B-423* B-424 B-428* B-430*
YES NO NO
B-459* B-473* B-488* B-7546*
B-7566 B-7576*
*Material UL recognised / CSA approved **Material UL recognised
*Any label 50.80 mm or larger is rotated on liner Order references beginning with “B” indicate bulk rolls. Continued on next page >>
Material suitable for smooth surfaces. Material suitable for smooth and textured surfaces. Material suitable for smooth, textured and highly textured surfaces.
13
www.bradyeurope.com
General and Industrial Identification Labels
Diagram Order
Reference
Labels
Per Roll
Width
A (mm)
Height
B (mm)
Applications/
Descriptions
Max. Characters
per line
for 5 Points
Max. Lines
of Text
for 5 Points
Surface
Suitability
M71-29-483 500 38.10 12.70 Asset ID for textured surfaces 37 5
M71-29-486 500 38.10 12.70 Asset ID for oily, greasy and textured surfaces 37 5
M71-29-489 500 38.10 12.70 Asset ID for oily, greasy and textured surfaces 37 5
M71-30-422 250 38.10 19.05 Asset ID for textured surfaces 37 8
M71-30-483 250 38.10 19.05 Asset ID for oily, greasy and textured surfaces 37 8
M71-30-486 250 38.10 19.05 Asset ID for oily, greasy and textured surfaces 37 8
M71-30-499 250 19.05 38.10 Asset ID for oily, greasy and textured surfaces 18 16
M71-31-423 250 38.10 25.40 General ID 37 10
M71-31-483 250 38.10 25.40 Asset ID for textured surfaces 37 10
M71-32-423 250 38.10 38.10 General ID 37 16
M71-32-489 250 38.10 38.10 Asset ID for oily, greasy and textured surfaces 37 16
M71-37-422 100 76.20 48.26 Asset ID for textured surfaces 50 20
M71-37-423 100 76.20 48.26 General ID and Asset ID 50 20
M71-37-483 100 76.20 48.26 Asset ID for oily, greasy and textured surfaces 50 20
M71-37-486 100 76.20 48.26 Asset ID for oily, greasy and textured surfaces 50 20
M71-38-423 100 101.60 48.26 General ID and Asset ID 50 20
M71-38-428 100 101.60 48.26 Asset ID, silver finish 50 20
M71-38-483 100 101.60 48.26 Asset ID for oily, greasy and textured surfaces 50 20
M71-38-489 100 101.60 48.26 Asset ID for oily, greasy and textured surfaces 50 20
M71-78-499 250 48.26 25.40 General ID 46 10
M71-80-488 250 19.05 22.86 Asset ID with print durability 18 10
M71-81-488 750 48.26 6.35 Asset ID with print durability 46 10
M71-81-499 750 48.26 6.35 General ID 46 10
M71-84-499 500 22.86 12.70 General ID 22 2
M71-97-488 250 22.86 22.86 Asset ID with print durability 18 9
M71C-375-422 1 (cont.) 9.53 15.24 m General ID 50 3
M71C-375-430 1 (cont.) 9.53 15.24 m General ID 50 3
M71C-475-422 1 (cont.) 12.07 15.24 m General ID 50 5
M71C-500-423 1 (cont.) 12.70 15.24 m Small ICs 50 5
M71C-500-428 1 (cont.) 12.70 15.24 m Small ICs, silver finish 50 5
M71C-500-483 1 (cont.) 12.70 15.24 m Small IC’s, silver finish 50 5
M71C-625-422 1 (cont.) 15.88 15.24 m General ID 50 6
M71C-1000-422 1 (cont.) 25.40 15.24 m General ID 50 10
M71C-1000-430 1 (cont.) 25.40 15.24 m General ID 50 5
M71C-1000-483 1 (cont.) 25.40 15.24 m General ID 50 10
M71C-1900-422 1 (cont.) 48.26 15.24 m General ID 50 10
M71C-1900-430 1 (cont.) 48.26 15.24 m General ID 50 10
M71C-1900-483 1 (cont.) 48.26 15.24 m General ID 50 10
Material suitable for smooth surfaces. Material suitable for smooth and textured surfaces. Material suitable for smooth, textured and highly textured surfaces.
Rating, Name Plate Labels (continued)
• B-422, B-423 Permanent Glossy Polyester
• B-428 Permanent Metallised Polyester
• B-430 Permanent Clear Polyester
• B-483 Ultra-Aggresive Glossy Polyester
• B-486 Ultra-Aggresive Metallised Polyester
• B-489 Ultra-Aggresive Matt Polyester
• B-488 Matt Polyester
• B-499 Nylon Cloth
*Any label 50.80 mm or larger is rotated on liner
www.bradyeurope.com 14
General and Industrial Identification Labels
Material suitable for smooth surfaces. Material suitable for smooth and textured surfaces. Material suitable for smooth, textured and highly textured surfaces.
Diagram Order
Reference
Labels
Per Roll
Colour Width
A (mm)
Height
B (mm)
Max. Characters
per line
for 7 points
Max. Lines
of Text
for 7 points
Surface
Suitability
M71-16-483 500 White 25.40 9.53 14 2
M71-17-483 500 White 25.40 12.70 10 2
M71-17-489 500 White 25.40 12.70 10 2
M71-19-483 250 White 25.40 25.40 14 7
M71-20-483 100 White 50.80 25.40 50 4
M71-23-483 100 White 101.60 25.40 38 4
M71-29-483 500 White 38.10 12.70 14 2
M71-29-489 500 White 38.10 12.70 14 2
M71-30-422 250 White 38.10 19.05 14 3
M71-30-483 250 White 38.10 19.05 14 3
M71-31-483 250 White 38.10 25.40 14 4
M71-32-489 250 White 38.10 38.10 14 4
M71-37-422 100 White 76.20 48.26 28 9
M71-37-483 100 White 76.20 48.26 28 9
M71-38-483 100 White 101.60 48.26 38 9
M71-38-489 100 White 101.60 48.26 39 9
M71C-375-422 1 (cont.) White 9.53 15.24 m 50 2
M71C-375-430 1 (cont.) Clear 9.53 15.24 m 50 2
M71C-475-422 1 (cont.) White 12.07 15.24 m 50 2
M71C-500-422 1 (cont.) White 12.07 15.24 m 50 2
M71C-500-483 1 (cont.) White 12.70 15.24 m 50 2
M71C-500-580-BK 1 (cont.) Black 12.70 15.24 m 50 2
M71C-500-580-BL 1 (cont.) Blue 12.70 15.24 m 50 2
M71C-500-580-BR 1 (cont.) Brown 12.70 15.24 m 50 2
M71C-500-580-CL 1 (cont.) Clear 12.70 15.24 m 50 2
M71C-500-580-GD 1 (cont.) Gold 12.70 15.24 m 50 2
M71C-500-580-GN 1 (cont.) Green 12.70 15.24 m 50 2
M71C-500-580-GY 1 (cont.) Grey 12.70 15.24 m 50 2
M71C-500-580-LB 1 (cont.) Light Blue 12.70 15.24 m 50 2
M71C-500-580-OC 1 (cont.) Ochre 12.70 15.24 m 50 2
M71C-500-580-OR 1 (cont.) Orange 12.70 15.24 m 50 2
M71C-500-580-PK 1 (cont.) Pink 12.70 15.24 m 50 2
M71C-500-580-PL 1 (cont.) Purple 12.70 15.24 m 50 2
M71C-500-580-RD 1 (cont.) Red 12.70 15.24 m 50 2
M71C-500-580-SB 1 (cont.) Sky Blue 12.70 15.24 m 50 2
M71C-500-580-TN 1 (cont.) Tan 12.70 15.24 m 50 2
M71C-500-580-WT 1 (cont.) White 12.70 15.24 m 50 2
M71C-500-580-YL 1 (cont.) Yellow 12.70 15.24 m 50 2
M71C-625-422 1 (cont.) White 15.88 15.24 m 50 3
M71C-1000-580-BK 1 (cont.) Black 25.40 15.24 m 50 5
M71C-1000-580-BL 1 (cont.) Blue 25.40 15.24 m 50 5
M71C-1000-580-BR 1 (cont.) Brown 25.40 15.24 m 50 5
M71C-1000-580-CL 1 (cont.) Clear 25.40 15.24 m 50 5
M71C-1000-580-GD 1 (cont.) Gold 25.40 15.24 m 50 5
M71C-1000-580-GN 1 (cont.) Green 25.40 15.24 m 50 5
M71C-1000-580-GY 1 (cont.) Grey 25.40 15.24 m 50 5
M71C-1000-580-LB 1 (cont.) Light Blue 25.40 15.24 m 50 5
General Industrial Labels
• B-422 Permanent Glossy Polyester
• B-430 Permanent Clear Polyester
• B-483 Ultra-Aggresive Glossy Polyester
• B-489 Ultra-Aggresive Matt Polyester
• B-580 Indoor/Outdoor Vinyl
*Any label 50.80 mm or larger is rotated on liner Continued on next page >>
15
www.bradyeurope.com
General and Industrial Identification Labels
General Industrial Labels (continued)
• B-422 Permanent Glossy Polyester
• B-430 Permanent Clear Polyester
• B-483 Ultra-Aggresive Glossy Polyester
• B-580 Indoor/Outdoor Vinyl
Material suitable for smooth surfaces. Material suitable for smooth and textured surfaces. Material suitable for smooth, textured and highly textured surfaces.
Diagram Order
Reference
Labels
Per Roll
Colour Width
A (mm)
Height
B (mm)
Max. Characters
per line
for 7 points
Max. Lines
of Text
for 7 points
Surface
Suitability
M71C-1000-580-OC 1 (cont.) Ochre 25.40 15.24 m 50 5
M71C-1000-580-OR 1 (cont.) Orange 25.40 15.24 m 50 5
M71C-1000-580-PK 1 (cont.) Pink 25.40 15.24 m 50 5
M71C-1000-580-PL 1 (cont.) Purple 25.40 15.24 m 50 5
M71C-1000-580-RD 1 (cont.) Red 25.40 15.24 m 50 5
M71C-1000-580-SB 1 (cont.) Sky Blue 25.40 15.24 m 50 5
M71C-1000-580-TN 1 (cont.) Tan 25.40 15.24 m 50 5
M71C-1000-580-WT 1 (cont.) White 25.40 15.24 m 50 5
M71C-1000-580-YL 1 (cont.) Yellow 25.40 15.24 m 50 5
M71C-1000-422 1 (cont.) White 25.40 15.24 m 50 5
M71C-1000-430 1 (cont.) Clear 25.40 15.24 m 50 5
M71C-1000-483 1 (cont.) White 25.40 15.24 m 50 5
M71C-1900-422 1 (cont.) White 48.26 15.24 m 50 9
M71C-1900-430 1 (cont.) Clear 48.26 15.24 m 50 9
M71C-1900-483 1 (cont.) White 48.26 15.24 m 50 9
M71C-2000-580-BK 1 (cont.) Black 50.80 15.24 m 50 8
M71C-2000-580-BL 1 (cont.) Blue 50.80 15.24 m 50 8
M71C-2000-580-BR 1 (cont.) Brown 50.80 15.24 m 50 8
M71C-2000-580-CL 1 (cont.) Clear 50.80 15.24 m 50 8
M71C-2000-580-GD 1 (cont.) Gold 50.80 15.24 m 50 8
M71C-2000-580-GN 1 (cont.) Green 50.80 15.24 m 50 8
M71C-2000-580-GY 1 (cont.) Grey 50.80 15.24 m 50 8
M71C-2000-580-LB 1 (cont.) Light Blue 50.80 15.24 m 50 8
M71C-2000-580-OC 1 (cont.) Ochre 50.80 15.24 m 50 8
M71C-2000-580-OR 1 (cont.) Orange 50.80 15.24 m 50 8
M71C-2000-580-PK 1 (cont.) Pink 50.80 15.24 m 50 8
M71C-2000-580-PL 1 (cont.) Purple 50.80 15.24 m 50 8
M71C-2000-580-RD 1 (cont.) Red 50.80 15.24 m 50 8
M71C-2000-580-SB 1 (cont.) Sky Blue 50.80 15.24 m 50 8
M71C-2000-580-TN 1 (cont.) Tan 50.80 15.24 m 50 8
M71C-2000-580-WT 1 (cont.) White 50.80 15.24 m 50 8
M71C-2000-580-YL 1 (cont.) Yellow 50.80 15.24 m 50 8
Order Reference Labels Per Roll Colours Width A (mm) Height B (mm) Pre- Printed Legend Surface Suitability
M71-30-423-TEST 250 Green on White 38.10 19.05 Tested
M71-30-428-CALI 250 Green on Silver 38.10 19.05 Calibration
M71-35-428-PROP 250 Black on Silver 41.40 19.05 Property Tag
Pre-Printed Labels
• B-423 Permanent Glossy Polyester
• B-428 Permanent Metallised Polyester
www.bradyeurope.com 16
Wire and Cable Marking
Wrap Around Labels
• B-498 Vinyl cloth: repositionable rubber based adhesive
• B-499 Nylon Cloth: permanent adhesive, pliable for rough
and smooth surfaces.
Diagram Order
Reference
Labels
Per Roll
Label
Width
A (mm)
Label
Height
B (mm)
Max.
Wire Diameter
(mm)
Approx.
Wire
Gauge*
Max. Characters
per line for
5 Points
Max. Lines
of Text for
5 Points
9 AWG Based on Type of Wire – Max Wire Diam. 3.03 mm
M71-7-498 500 12.70 12.70 3.03 9 11 5
M71-7-499 500 12.70 12.70 3.03 9 11 5
M71-81-499 750 48.26 6.35 10.00 9 46 10
M71-84-499 500 22.86 12.70 6.00 9 22 2
6 AWG Based on Type of Wire – Max Wire Diam. 4.55 mm
M71-10-498 750 6.35 19.05 4.55 6 5 3
M71-11-498 500 12.70 19.05 4.55 6 11 8
BM71-11-498 5000 12.70 19.05 4.55 6 11 8
M71-11-499 500 12.70 19.05 4.55 6 11 8
BM71-11-499 5000 12.70 19.05 4.55 6 11 8
3 AWG Based on Type of Wire – Max Wire Diam. 6.06 mm
M71-16-498 500 9.53 25.40 6.06 3 8 10
M71-16-499 500 9.53 25.40 6.06 3 8 10
M71-17-498 500 25.40 12.70 6.06 3 24 5
M71-18-498 250 19.05 25.40 6.06 3 18 10
M71-18-499 250 19.05 25.40 6.06 3 18 10
BM71-18-498 2500 19.05 25.40 6.06 3 18 10
M71-19-498 250 25.40 25.40 6.06 3 24 10
BM71-19-498 2500 25.40 25.40 6.06 3 24 10
M71-19-499 250 25.40 25.40 6.06 3 24 10
M71-78-499 250 48.26 25.40 10.00 3 46 10
0 AWG Based on Type of Wire – Max Wire Diam. 9.10 mm
M71-28-499 750 38.10 6.35 9.10 0 5 16
M71-29-498 500 38.10 12.70 9.10 0 11 16
BM71-29-498 5000 12.70 38.10 9.10 0 11 16
M71-29-499 500 12.70 38.10 9.10 0 11 16
M71-30-498 250 19.05 38.10 9.10 0 18 16
M71-30-499 250 19.05 38.10 9.10 0 18 16
M71-31-498 250 25.40 38.10 9.10 0 24 16
M71-31-499 250 25.40 38.10 9.10 0 24 16
M71-32-498 250 38.10 38.10 9.10 0 37 16
0000 AWG Based on Type of Wire – Max Wire Diam. 15.16 mm
M71-21-498 100 25.40 63.50 15.6 0000 24 23
M71-21-499 100 25.40 63.50 15.6 0000 24 23
0000 AWG Based on Type of Wire – Max Wire Diam. 24.26 mm
M71-33-498 100 38.10 101.60 24.26 0000 37 16
Order references beginning with “B” indicate bulk rolls.*Based on National Electric Code insulation measurement of THHN Wire.
17
www.bradyeurope.com
Wire and Cable Marking
Self-Laminating Labels
• B-427 Vinyl: resistant to water, oil, solvents and abrasion.
• B-642 Tedlar®: excellent abrasion and smudge resistance,
self-extinguishing
Diagram Order
Reference
Labels
Per Roll
Colour Label
Width
A (mm)
Label
Height
B (mm)
Write-on
Height
C (mm)
Min. Wire
Diameter
(mm)
Max. Wire
Diameter
(mm)
Approx.
Wire
Gauge*
Max. Characters
per line for
5 Points
Max. Lines
of Text for
5 Points
10 to 0 AWG Based on Type of Wire – Maximum Wire Diam 10.00
M71-104-427 250 White 38.10 25.40 9.53 3.00 8.00 10 to 0 37 3
10 to 4 AWG Based on Type of Wire – Maximum Wire Diam 5.00
BM71-17-427 5000 White 12.70 25.40 9.53 3.00 5.00 10 to 4 11 3
M71-17-427 500 White 12.70 25.40 9.53 3.00 5.00 10 to 4 11 3
BM71-18-427 2500 White 19.05 25.40 9.53 3.00 5.00 10 to 4 18 3
M71-18-427 250 White 19.05 25.40 9.53 3.00 5.00 10 to 4 18 3
BM71-19-427 2500 White 25.40 25.40 9.53 3.00 5.00 10 to 4 24 3
M71-19-427 250 White 25.40 25.40 9.53 3.00 5.00 10 to 4 24 3
M71-19-427-YL 250 Yellow 25.40 25.40 9.53 3.00 5.00 10 to 4 24 3
M71-19-642 250 White 25.40 25.40 9.53 3.00 5.00 10 to 4 24 3
M71-96-427 250 White 25.40 19.05 9.53 3.00 5.00 10 to 4 24 3
10 to 10 AWG Based on Type of Wire – Maximum Wire Diam 3.00
M71-10-427 750 White 6.35 19.05 9.53 3.00 3.00 10 to 10 5 3
BM71-11-427 5000 White 12.70 19.05 9.53 3.00 3.00 10 to 10 11 3
M71-11-427 500 White 12.70 19.05 9.53 3.00 3.00 10 to 10 11 3
7 to 0000 AWG Based on Type of Wire – Maximum Wire Diam 12.00
BM71-107-427 1000 White 50.80 38.10 12.70 4.00 12.00 7 to 0000 46 5
M71-107-427 100 White 50.80 38.10 12.70 4.00 12.00 7 to 0000 46 5
7 to 0000 AWG Based on Type of Wire – Maximum Wire Diam 10.00
M71-88-427 250 White 44.45 38.10 12.70 4.00 10.00 7 to 0000 40 5
7 to 0 AWG Based on Type of Wire – Maximum Wire Diam 8.00
M71-28-427 750 White 6.35 38.10 12.70 4.00 8.00 7 to 0 5 5
BM71-29-427 5000 White 12.70 38.10 12.70 4.00 8.00 7 to 0 11 5
M71-29-427 500 White 12.70 38.10 12.70 4.00 8.00 7 to 0 11 5
BM71-30-427 2500 White 19.05 38.10 12.70 4.00 8.00 7 to 0 18 5
M71-30-427 250 White 19.05 38.10 12.70 4.00 8.00 7 to 0 18 5
M71-30-427-BL 250 Blue 19.05 38.10 12.70 4.00 8.00 7 to 0 18 5
M71-30-427-PL 250 Purple 19.05 38.10 12.70 4.00 8.00 7 to 0 18 5
M71-30-427-RD 250 Red 19.05 38.10 12.70 4.00 8.00 7 to 0 18 5
BM71-31-427 2500 White 25.40 38.10 12.70 4.00 8.00 7 to 0 24 5
M71-31-427 250 White 25.40 38.10 12.70 4.00 8.00 7 to 0 24 5
M71-31-427-GN 250 Green 25.40 38.10 12.70 4.00 8.00 7 to 0 24 5
M71-31-427-RD 250 Red 25.40 38.10 12.70 4.00 8.00 7 to 0 24 5
M71-31-427-YL 250 Yellow 25.40 38.10 12.70 4.00 8.00 7 to 0 24 5
M71-31-642 250 White 25.40 38.10 12.70 4.00 8.00 7 to 0 24 5
BM71-32-427 1000 White 38.10 38.10 12.70 4.00 8.00 7 to 0 37 5
M71-32-427 250 White 38.10 38.10 12.70 4.00 8.00 7 to 0 37 5
M71-32-427-YL 250 Yellow 38.10 38.10 12.70 4.00 8.00 7 to 0 37 5
7 to 4 AWG Based on Type of Wire – Maximum Wire Diam 5.00
M71-103-427 250 White 25.40 31.75 12.70 4.00 5.00 7 to 4 24 5
*Based on National Electric Code insulation measurement of THHN Wire. Continued on next page >>Order references beginning with “B” indicate bulk rolls.
www.bradyeurope.com 18
Wire and Cable Marking
Self-Laminating Labels (continued)
• B-427 Vinyl: resistant to water, oil, solvents and abrasion.
• B-642 Tedlar®: excellent abrasion and smudge resistance,
self-extinguishing
Diagram Order
Reference
Labels
Per Roll
Colour Label
Width
A (mm)
Label
Height
B (mm)
Write-on
Height
C (mm)
Min. Wire
Diameter
(mm)
Max. Wire
Diameter
(mm)
Approx.
Wire
Gauge*
Max. Characters
per line for
5 Points
Max. Lines
of Text for
5 Points
3 to 0000 AWG Based on Type of Wire – Maximum Wire Diam 14.00
BM71-21-427 1000 White 25.40 63.50 19.05 6.00 14.00 3 to 0000 24 8
M71-21-427 100 White 25.40 63.50 19.05 6.00 14.00 3 to 0000 24 8
M71-21-427-YL 100 Yellow 25.40 63.50 19.05 6.00 14.00 3 to 0000 24 8
M71-21-642 100 White 25.40 63.50 19.05 6.00 14.00 3 to 0000 24 8
1 to 0000 AWG Based on Type of Wire – Maximum Wire Diam 24.00
BM71-23-427 1000 White 25.40 101.60 25.40 8.00 24.00 1 to 0000 24 10
M71-23-427 100 White 25.40 101.60 25.40 8.00 24.00 1 to 0000 24 10
BM71-33-427 500 White 38.10 101.60 25.40 8.00 24.00 1 to 0000 37 10
M71-33-427 100 White 38.10 101.60 25.40 8.00 24.00 1 to 0000 37 10
M71-33-427-YL 100 Yellow 38.10 101.60 25.40 8.00 24.00 1 to 0000 37 10
1 to 0000 AWG Based on Type of Wire – Maximum Wire Diam 17.00
BM71-34-427 500 White 38.10 152.40 38.10 8.00 17.00 1 to 0000 37 16
M71-66-427 100 White 49.23 80.01 25.40 8.00 17.00 1 to 0000 46 10
1 to 0000 AWG Based on Type of Wire – Maximum Wire Diam 36.00
M71-34-427 50 White 38.10 152.40 38.10 12.00 36.00 1 to 0000 37 16
1 to 0000 AWG Based on Type of Wire – Maximum Wire Diam 20.00
BM71-109-427 500 White 38.10 101.60 38.10 12.00 20.00 1 to 0000 37 16
M71-109-427 100 White 38.10 101.60 38.10 12.00 20.00 1 to 0000 37 16
1 to 0000 AWG Based on Type of Wire – Maximum Wire Diam 17.00
BM71-64-427 1000 White 25.40 85.73 28.58 9.00 17.00 1 to 0000 24 12
M71-64-427 100 White 25.40 85.73 28.58 9.00 17.00 1 to 0000 24 12
Applying Self-laminating Labels
Apply the printed area to
your wire.
Once applied the clear laminate will protect
your legend for years to come.
Wrap the clear area around the wire, covering the
printed area.
*Based on National Electric Code insulation measurement of THHN Wire. Order references beginning with “B” indicate bulk rolls.
19
www.bradyeurope.com
Wire and Cable Marking
PermaSleeve™ Heat-Shrink Sleeve Markers
• B-342 Polyolefin: 3:1 Shrink ratio, self-extinguishing,
meets requirements of SAE AMS-DTL-23053/5 Class 1,
SAE-AS-81531, MIL-STD-202 method 215K,
is UL224 recognised, CSA acceptance pending
• B-341 Polyolefin: 2:1 Shrink ratio, same properties as B-342
Diagram Order
Reference
Sleeves
Per Roll
Colour Sleeve
Width
A (mm)
Sleeve
Height
B (mm)
Min. Wire
Diameter
(mm)
Max. Wire
Diameter
(mm)
Approx.
Wire
Gauge*
Max. Characters
per line for
5 Points
Max. Lines
of Text for
5 Points
3:1 SHRINK RATIO
25.78mm marker width
M71-94-1-342 100 White 25.78 4.62 0.58 2.03 28 to 18 22 1
BM71-94-1-342 2500 White 25.78 4.62 0.58 2.03 28 to 18 22 1
M71-94-1-342YL 100 Yellow 25.78 4.62 0.58 2.03 28 to 18 22 1
BM71-94-1-342YL 2500 Yellow 25.78 4.62 0.58 2.03 28 to 18 22 1
M71-125-1-342 100 White 25.78 5.97 1.17 2.79 22 to 16 22 1
BM71-125-1-342 1000 White 25.78 5.97 1.17 2.79 22 to 16 22 1
M71-125-1-342YL 100 Yellow 25.78 5.97 1.17 2.79 22 to 16 22 1
M71-187-1-342 100 White 25.78 8.51 1.57 3.81 18 to 12 22 2
BM71-187-1-342 1000 White 25.78 8.51 1.57 3.81 18 to 12 22 2
M71-187-1-342YL 100 Yellow 25.78 8.51 1.57 3.81 18 to 12 22 2
BM71-187-1-342YL 1000 Yellow 25.78 8.51 1.57 3.81 18 to 12 22 2
M71-250-1-342 100 White 25.78 11.15 2.39 5.46 16 to 10 22 3
BM71-250-1-342 1000 White 25.78 11.15 2.39 5.46 16 to 10 22 3
M71-250-1-342YL 100 Yellow 25.78 11.15 2.39 5.46 16 to 10 22 3
M71-375-1-342 100 White 25.78 16.38 3.18 8.13 12 to 6 22 5
BM71-375-1-342 1000 White 25.78 16.38 3.18 8.13 12 to 6 22 5
M71-375-1-342YL 100 Yellow 25.78 16.38 3.18 8.13 12 to 6 22 5
M71-500-1-342 100 White 25.78 21.62 4.75 11.43 8 to 1 22 7
BM71-500-1-342 1000 White 25.78 21.62 4.75 11.43 8 to 1 22 7
M71-500-1-342YL 100 Yellow 25.78 21.62 4.75 11.43 8 to 1 22 7
BM71-500-1-342YL 1000 Yellow 25.78 21.62 4.75 11.43 8 to 1 22 7
44.83mm marker width
M71-94-175-342 100 White 44.83 4.62 0.58 2.03 28 to 18 41 1
BM71-94-175-342 2500 White 44.83 4.62 0.58 2.03 28 to 18 41 1
M71-94-175-342YL 100 Yellow 44.83 4.62 0.58 2.03 28 to 18 41 1
BM71-94-175-342YL 2500 Yellow 44.83 4.62 0.58 2.03 28 to 18 41 1
M71-125-175-342 100 White 44.83 5.97 1.17 2.79 22 to 16 41 1
BM71-125-175-342 1000 White 44.83 5.97 1.17 2.79 22 to 16 41 1
M71-125-175-342YL 100 Yellow 44.83 5.97 1.17 2.79 22 to 16 41 1
BM71-125-175-342YL 1000 Yellow 44.83 5.97 1.17 2.79 22 to 16 41 1
M71-187-175-342 100 White 44.83 8.51 1.57 3.81 18 to 12 41 3
BM71-187-175-342 1000 White 44.83 8.51 1.57 3.81 18 to 12 41 3
M71-187-175-342YL 100 Yellow 44.83 8.51 1.57 3.81 18 to 12 41 3
BM71-187-175-342YL 1000 Yellow 44.83 8.51 1.57 3.81 18 to 12 41 3
M71-250-175-342 100 White 44.83 11.15 2.39 5.46 16 to 10 41 3
BM71-250-175-342 1000 White 44.83 11.15 2.39 5.46 16 to 10 41 3
M71-250-175-342YL 100 Yellow 44.83 11.15 2.39 5.46 16 to 10 41 3
BM71-250-175-342YL 1000 Yellow 44.83 11.15 2.39 5.46 16 to 10 41 3
M71-375-175-342 100 White 44.83 16.38 3.18 8.13 12 to 6 41 5
BM71-375-175-342 1000 White 44.83 16.38 3.18 8.13 12 to 6 41 5
M71-375-175-342YL 100 Yellow 44.83 16.38 3.18 8.13 12 to 6 41 5
M71-500-175-342 100 White 44.83 21.62 4.75 11.43 8 to 1 41 7
BM71-500-175-342 1000 White 44.83 21.62 4.75 11.43 8 to 1 41 7
M71-500-175-342YL 100 Yellow 44.83 21.62 4.75 11.43 8 to 1 41 7
BM71-500-175-342YL 1000 Yellow 44.83 21.62 4.75 11.43 8 to 1 41 7
Continuous marker
BM71C-125-342 1 (cont.) White 15.24 m 5.97 1.17 2.79 22 to 16 NA NA
BM71C-187-342 1 (cont.) White 15.24 m 8.51 1.57 3.81 18 to 12 NA NA
BM71C-250-342 1 (cont.) White 15.24 m 11.15 2.39 5.46 16 to 10 NA NA
BM71C-375-342 1 (cont.) White 15.24 m 16.38 3.18 8.13 12 to 6 NA NA
BM71C-500-342 1 (cont.) White 15.24 m 21.62 4.75 11.43 8 to 1 NA NA
2:1 SHRINK RATIO
25.78mm marker width
M71-1000-1-341 50 White 25,78 42,16 11.43 24.13 1 to 500 22 16
M71-1000-1-341YL 50 Yellow 25,78 42,16 11.43 24.13 1 to 500 22 16
44.83mm marker width
M71-1000-175-341 50 White 44,83 42,16 11.43 24.13 1 to 500 41 16
BM71-1000-175-341 500 White 44,83 42,16 11.43 24.13 1 to 500 41 16
M71-1000-175-341YL 50 Yellow 44,83 42,16 11.43 24.13 1 to 500 41 16
Continuous marker
BM71C-1000-341 1 (cont.) White 15.24 m 42,16 11.43 24.13 1 to 500 NA NA
*Based on National Electric Code insulation measurement of THHN Wire. Order references beginning with “B” indicate bulk rolls.
www.bradyeurope.com 20
Wire and Cable Marking
Rigid Durasleeve Inserts
• B-7696: Rigid vinyl tag
Rapido™
• B-7599: Yellow coated polyetheylene tag suitable for durable terminated wire marking
for electrical devices and fibre installations.
Ademark Tag Carrier
Ademark carriers are produced in transparent PVC. The special shape of the carrier
means that it can be adapted to cables of various diameters. This means that there are
only seven different sizes of carriers which cater for cables with external diameters
from 1.3 mm up to 24 mm.
• Temperature range: -40° to 60°C
• Material: PVC
• Self extinguishing: UL94VO
Order
Reference
Tags
Per Roll
Colour Width
(mm)
Height
(mm)
Carrier Max. Characters
per line for 5 Points
Max. Lines of Text
for 5 Points
BM71D-3-7696 2500 White 16.00 4.40 AC*-L16 11 1
BM71D-3-7696-YL 5000 Yellow 16.00 4.40 AC*-L16 11 1
BM71D-5-7696 2500 White 30.00 4.40 AC*-L30 21 1
BM71D-5-7696-YL 5000 Yellow 30.00 4.40 AC*-L30 21 1
Order
Reference
Tags
Per Roll
Colour Width
A (mm)
Height
B (mm)
Max. Characters
per line for 5 Points
Max. Lines of Text
for 5 Points
BM71R-1-7599-YL 2500 Yellow 22.90 5.20 11 1
BM71R-2-7599-YL 2500 Yellow 23.00 5.20 8 1
BM71R-3-7599-YL 2500 Yellow 25.00 5.70 7 2
BM71R-4-7599-YL 2500 Yellow 26.00 7.00 7 2
BM71R-5-7599-YL 2500 Yellow 41.00 11.00 17 3
Order Reference Carriers per pack Length (mm) Wire O.D. (mm)
AC-0-L16 2000 16.00 mm 1.30 - 2.00
AC-1-L16 2000 16.00 mm 1.80 - 2.50
AC-2-L16 2000 16.00 mm 2.50 - 4.00
AC-3-L16 1000 16.00 mm 4.00 - 6.50
AC-4-L16 1000 16.00 mm 6.00 - 10.00
AC-5-L16 750 16.00 mm 9.00 - 15.00
AC-6-L16 500 16.00 mm 15.00 - 24.00
Order Reference Carriers per pack Length (mm) Wire O.D. (mm)
AC-0-L30 2000 30.00 mm 1.30 - 2.00
AC-1-L30 2000 30.00 mm 1.80 - 2.50
AC-2-L30 2000 30.00 mm 2.50 - 4.00
AC-3-L30 1000 30.00 mm 4.00 - 6.50
AC-4-L30 1000 30.00 mm 6.00 - 10.00
AC-5-L30 750 30.00 mm 9.00 - 15.00
AC-6-L30 500 30.00 mm 15.00 - 24.00
Order references beginning with “B” indicate bulk rolls.
Order references beginning with “B” indicate bulk rolls.
21
www.bradyeurope.com
Wire and Cable Marking
Heatex™ Cable Markers
• B-7643: Zero halogen polyether polyurethane tag material
Tear Resistant Cable Markers
• B-109 Polyethylene: Provides extreme tear resistance
and excellent cold-weather performance;
meets requirements of DIN VDE 0472/parts 815
• B-145 Polyethylene: Tear resistant and 2-side printable,
is UL94 V2 recognised
Coloured Nylon Ties
Perfect for colour coded applications.
Size: 200 x 4 mm
Material: Nylon
Packing: 100 pieces
Order
Reference
Tags
Per Roll
Colour Width
A (mm)
Height
B (mm)
Max. Characters
per line for 5 Points
Max. Lines of Text
for 5 Points
BM71H-1-7643-WT 250 White 60.00 10.00 40 4
BM71H-1-7643-YL 250 Yellow 60.00 10.00 40 4
BM71H-2-7643-WT 250 White 75.00 10.00 51 4
BM71H-2-7643-YL 250 Yellow 75.00 10.00 51 4
BM71H-3-7643-WT 250 White 75.00 25.00 51 10
BM71H-3-7643-YL 250 Yellow 75.00 25.00 51 10
Diagram Order
Reference
Tags
Per Roll
Colour Width
A (mm)
Height
B (mm)
Write-on Area
W x H (mm)
Max. Characters
per line for 5 Points
Max. Lines of Text
for 5 Points
Cable Type
M71-12-109 100 White 19.05 76.20 17.78 x 52.07 45 6 Cable Bundles; Power & Ground Cables
BM71-12-109 1,000 White 19.05 76.20 17.78 x 52.07 45 6 Cable Bundles
M71-36-109 250 White 44.45 28.58 44.45 x 28.57 40 15 Power & Ground Cables
BM71-111-145-GY 1,000 Grey 19.25 30.63 19.25 x 30.63 16 14 145C Tag; Power & Ground Cables
BM71-110-145-GY 1,000 Grey 44.45 25.40 44.45 x 25.40 28 20 145P Tag; Power & Ground Cables
Order
Reference
Colour
229955 White
229956 Blue
229957 Red
229958 Orange
Order
Reference
Colour
229959 Yellow
229960 Green
229961 Violet
229962 Black
BL Blue, for horizontal cable terminations
BR Brown, for campus backbone cable terminations
GR Green, network connections
GY Grey, for backbone cable between intermediate cross-connect and
telecommunications cabinet
OR Orange, central office termination
PL Purple, major switching and data equipment terminations
RD Red, for all key telephone equipment terminations
YL Yellow, for auxiliary, maintenance, alarms, security, etc.
Order references beginning with “B” indicate bulk rolls.
Order references beginning with “B” indicate bulk rolls.
www.bradyeurope.com 22
Electrical Component Marking
EPREP Labels – Engraved Plate Replacement Labels
• B-7593: Polyethylene Foam Laminate
BRADY EPREP labels are innovative labels specifically designed to
replace engraved and plotted plates for identification of electrical
components, electrical cabinets, push buttons, patch panels etc.
Diagram Order
Reference
Tags
Per Roll
Colour Width
A (mm)
Height
B (mm)
Diameter
D (mm)
Max. Characters
per line for 5 Points
Max. Lines of Text
for 5 Points
Format
M71EP-1-7593-SL 250 Silver 27.00 8.00 22 3 Roll
M71EP-1-7593-WT 250 White 27.00 8.00 22 3 Roll
M71EP-2-7593-SL 250 Silver 27.00 12.50 22 5 Roll
M71EP-2-7593-WT 250 White 27.00 12.50 22 5 Roll
M71EP-3-7593-SL 150 Silver 27.00 15.00 22 6 Roll
M71EP-3-7593-WT 150 White 27.00 15.00 22 6 Roll
M71EP-4-7593-SL 150 Silver 27.00 18.00 22 7 Roll
M71EP-4-7593-WT 150 White 27.00 18.00 22 7 Roll
M71EP-5-7593-BK 100 Black 30.00 40.00 24.00 24 5 Fanfolded
M71EP-5-7593-GN 100 Green 30.00 40.00 24.00 24 5 Fanfolded
M71EP-5-7593-RD 100 Black 30.00 40.00 24.00 24 5 Fanfolded
M71EP-5-7593-SL 100 Silver 30.00 40.00 24.00 24 5 Fanfolded
M71EP-5-7593-WT 100 White 30.00 40.00 24.00 24 5 Fanfolded
M71EP-5-7593-YL 100 Yellow 30.00 40.00 24.00 24 5 Fanfolded
M71EP-6-7593-BK 100 Black 45.00 15.00 36 6 Fanfolded
M71EP-6-7593-RD 100 Black 45.00 15.00 36 6 Fanfolded
M71EP-6-7593-YL 100 Yellow 45.00 15.00 36 6 Fanfolded
BM71E-6-7593-SL 500 Silver 45.00 15.00 36 6 Bulk roll
BM71E-6-7593-WT 500 White 45.00 15.00 36 6 Bulk roll
M71EP-7-7593-SL 100 Silver 35.00 18.00 28 7 Roll
M71EP-7-7593-WT 100 White 35.00 18.00 28 7 Roll
M71EP-7-7593-YL 100 Yellow 35.00 18.00 28 7 Roll
M71EP-8-7593-SL 125 Silver 48.00 19.00 39 7 Roll
M71EP-8-7593-WT 125 White 48.00 19.00 39 7 Roll
Roll
Fanfolded
Bulk roll
Nylon Cloth Labels
• B-499: White nylon cloth with high adhesion
Terminal Block Repositionable Markers
• B-498: Repositionable vinyl cloth
Order
Reference
Tags
Per Roll
Label Diameter
C (mm)
Max. Characters
per line for 5 Points
Max. Lines of Text
for 5 Points
M71-82-499 500 9.52 7 2
M71-83-499 250 12.70 9 3
Order
Reference
Label Width
A (mm)
Label Length
B (m) (continuous)
Max. Characters
per line for 5 Points
M71C-240-498 6.10 9.14 4
M71C-318-498 8.08 9.14 7
BM71C-318-498 8.08 91.44 7
M71C-375-498 9.53 9.14 7
BM71C-375-498 9.53 91.44 7
TEXT 1
TEXT 2
TEXT 3
.
.
.
100
101
102
.
.
.
Order references beginning with “B” indicate bulk rolls.
Order references beginning with “B” indicate bulk rolls.
Order references with “C” (e.g. M71C) indicate continuous.
23
www.bradyeurope.com
Datacom Labels
Self-Laminating Labels
• B-427 Vinyl: excellent abrasion and
smudge resistance.
Diagram Order
Reference
Labels
Per Roll
Label
Width
A (mm)
Label
Height
B (mm)
Write-on
Height
C (mm)
Application Max. Characters
per line for
5 Points
Max. Lines
of Text for
5 Points
BM71-19-427 2500 25.40 25.40 9.53 2 Pair Fibre 24 3
M71-19-427 250 25.40 25.40 9.53 2 Pair Fibre 24 3
M71-19-427-YL 250 25.40 25.40 9.53 2 Pair Fibre 24 3
BM71-21-427 1000 25.40 63.50 19.05 4 Pair STP, 25 Pair Copper, 4-12 Pair Fibre 24 8
M71-21-427 100 25.40 63.50 19.05 4 Pair STP, 25 Pair Copper, 4-12 Pair Fibre 24 8
M71-21-427-YL 100 25.40 63.50 19.05 4 Pair STP, 25 Pair Copper, 4-12 Pair Fibre 24 8
BM71-23-427 1000 25.40 101.60 25.40 50 Pair Copper, 24 Pair Fibre, Backbone cable 24 10
M71-23-427 100 25.40 101.60 25.40 50 Pair Copper, 24 Pair Fibre, Backbone cable 24 10
BM71-29-427 5000 12.70 38.10 12.70 CAT 5, 4 Pair UTP 11 5
M71-29-427 500 12.70 38.10 12.70 CAT 5, 4 Pair UTP 11 5
BM71-30-427 2500 19.05 38.10 12.70 CAT 5, 4 Pair UTP 18 5
M71-30-427 250 19.05 38.10 12.70 CAT 5, 4 Pair UTP 18 5
M71-30-427-BL 250 19.05 38.10 12.70 CAT 5, 4 Pair UTP 18 5
M71-30-427-PL 250 19.05 38.10 12.70 CAT 5, 4 Pair UTP 18 5
M71-30-427-RD 250 19.05 38.10 12.70 CAT 5, 4 Pair UTP 18 5
BM71-31-427 2500 25.40 38.10 12.70 4 Pair UTP, CAT 5, CAT 5E, RG-6 Coax, RG-59 Coax 24 5
M71-31-427 250 25.40 38.10 12.70 4 Pair UTP, CAT 5, CAT 5E, CAT 6, Silver Satin, RG-6 Coax, RG-59 Coax 24 5
M71-31-427-GN 250 25.40 38.10 12.70 4 Pair UTP, CAT 5, CAT 5E, CAT 6, Silver Satin, RG-6 Coax, RG-59 Coax 24 5
M71-31-427-RD 250 25.40 38.10 12.70 4 Pair UTP, CAT 5, CAT 5E, CAT 6, Silver Satin, RG-6 Coax, RG-59 Coax 24 5
M71-31-427-YL 250 25.40 38.10 12.70 4 Pair UTP, CAT 5, CAT 5E, CAT 6, Silver Satin, RG-6 Coax, RG-59 Coax 24 5
BM71-32-427 1000 38.10 38.10 12.70 CAT 5, 4 Pair UTP 37 5
M71-32-427 250 38.10 38.10 12.70 CAT 5, 4 Pair UTP 37 5
M71-32-427-YL 250 38.10 38.10 12.70 CAT 5, 4 Pair UTP 37 5
BM71-33-427 500 38.10 101.60 25.40 50 Pair Copper, 24 Pair Fibre, Backbone cable 37 10
M71-33-427 100 38.10 101.60 25.40 50 Pair Copper, 24 Pair Fibre, Backbone cable 37 10
M71-33-427-YL 100 38.10 101.60 25.40 50 Pair Copper, 24 Pair Fibre, Backbone cable 37 10
BM71-34-427 500 38.10 152.40 38.10 100 Pair Copper, 36 Pair Fibre 37 16
M71-34-427 50 38.10 152.40 38.10 100 Pair Copper 37 16
BM71-64-427 1000 25.40 85.73 28.58 Fibre/Coax 24 12
M71-64-427 100 25.40 85.73 28.58 Fibre/Coax 24 12
M71-66-427 100 49.23 80.01 25.40 50 Pair Copper, 24 Pair Fibre, Backbone cable 46 10
M71-88-427 250 44.45 38.10 12.70 CAT 5, 4 Pair UTP 40 5
M71-103-427 250 25.40 31.75 12.70 CAT 5, 4 Pair UTP 24 5
M71-104-427 250 38.10 25.40 9.53 2 Pair Fibre, Single/Multi-Mode 37 3
BM71-107-427 1000 50.80 38.10 12.70 CAT 5, 4 Pair UTP 46 5
M71-107-427 100 50.80 38.10 12.70 CAT 5, 4 Pair UTP 46 5
BM71-109-427 500 38.10 101.60 38.10 50 Pair Copper, 24 Pair Fibre, Backbone cable 37 16
M71-109-427 100 38.10 101.60 38.10 50 Pair Copper, 24 Pair Fibre, Backbone cable 37 16
Order references beginning with “B” indicate bulk rolls.
www.bradyeurope.com 24
Datacom Labels
TubeSleeve Carriers
Brady TubeSleeve Carriers are the ideal complement to self-laminating labels, where the cables are thin and available
space for text is small. Apply the tubesleeve to the cable and then apply the self-lam. The limited available space is
increased significantly, giving you the possibility of printing more text.
Order Reference Sleeves Per Pack Min. Cable Diameter (mm) Max. Cable Diameter (mm) Recomended Label
BTS1426 1000 1.00 4.00 M71-31-427
BTS4626 1000 4.00 6.00 M71-31-427
BTS6826 400 6.00 8.00 M71-23-423
BTS81226 250 8.00 12.00 M71-23-423
Fibre Optic Labels/Flags
• B-425 Polypropylene
Power and Ground Cable Tags
• B-109 Polyethylene: Extreme tear resistance
• B-145 Polyethylene: Tear resistant and 2-side printable
• B145FR Polyethylene: Tear resistant, 2-side printable
and flame retardant
Diagram Order
Reference
Labels
Per Roll
Label Width
A (mm)
Label Height
B (mm)
Application Max. Characters
per line for 5 Points
Max. Lines of Text
for 5 Points
M71FT-1-425 250 30.00 20.00 Fibre Strand 24 8
M71FP-1-425 250 30.00 20.00 Fibre Strand 24 8
M71FP-2-425 250 44.45 25.40 Fibre Strand 35 10
Diagram Order
Reference
Tags
Per Roll
Colour Width
A (mm)
Height
B (mm)
Write-on Area
W x H (mm)
Max. Characters
per line
for 5 Points
Max. Lines
of Text
for 5 Points
Application
BM71-12-109 1000 White 19.05 76.20 17.78 x 52.07 45 6 Communications Cables, Power & Ground Cables
M71-12-109 100 White 19.05 76.20 17.78 x 52.07 45 6 Communications Cables
M71-36-109 250 White 44.45 28.58 44.45 x 28.57 40 15 Cable Labels
BM71-111-145-GY 1000 Grey 30.63 19.25 19.25 x 30.63 16 14 Cable Labels
M71-111-145FR-GY 100 Grey 30.63 19.25 19.25 x 30.63 16 14 Cable Labels
M71-111-145-GY 100 Grey 30.63 19.25 19.25 x 30.63 16 14 Cable Labels
M71-110-145FR-GY 100 Grey 44.45 25.40 44.45 x 25.40 28 20 Cable Labels
BM71-110-145-GY 1000 Grey 44.45 25.40 44.45 x 25.40 28 20 Cable Labels
M71-110-145-GY 100 Grey 44.45 25.40 44.45 x 25.40 28 20 Cable Labels
Order references beginning with “B” indicate bulk rolls.
25
www.bradyeurope.com
Datacom Labels
Patch Panel Identification
• B-412 Polypropylene Tag
• B-422 Permanent Glossy Polyester
• B-423 Permanent Polyester
• B-430 Permanent Clear Polyester
Diagram Order
Reference
Tags
Per Roll
Label
Width
A (mm)
Label
Height
B (mm)
Application Max. Characters
per line
for 5 Points
Max. Lines
of Text
for 5 Points
M71-10-423 750 19.05 6.35 Patch Panel - ID Port, Voice/Data Identification 18 2
M71C-230-412 1 (cont.) 5.84 15.24 m Broadcast Patch Bay Strips 50 4
M71C-375-412 1 (cont.) 9.53 15.24 m Broadcast Patch Bay Strips 50 3
M71C-375-422 1 (cont.) 9.53 15.24 m Outlet, Pach panel, Cont. Tape, Cut to size 50 3
M71C-375-430 1 (cont.) 9.53 15.24 m Outlet, Pach panel, Cont. Tape, Cut to size 50 3
M71C-475-412 1 (cont.) 12.70 15.24 m Broadcast Patch Bay Strips, Racks& Panels 50 4
M71C-500-412 1 (cont.) 12.70 15.24 m Broadcast Patch Bay Strips 50 5
M71C-500-422 1 (cont.) 12.70 15.24 m Outlet, Pach panel, Cont. Tape, Cut to size 50 5
M71C-500-430 1 (cont.) 12.70 15.24 m Outlet, Pach panel, Cont. Tape, Cut to size 50 5
M71C-785-412 1 (cont.) 19.94 15.24 m Broadcast Patch Bay Strips 50 8
Workstation Labels
• B-412 Polypropylene
• B-422 Permanent Glossy Polyester
• B-430 Clear Polyester
Diagram Order
Reference
Labels
Per
Roll
Label
Width
A (mm)
Label
Height
B (mm)
Application Max. Characters
per line
for 5 Points
Max. Lines
of Text
for 5 Points
M71-16-430 500 25.40 9.53 Location ID, 1-4 Outlet Faceplates 24 3
M71-17-430 500 25.40 12.70 Location ID, 1-4 Outlet Faceplates 24 5
BM71-40-412 5000 49.23 9.53 Desi-Strip Inserts 40 3
M71-40-412 750 49.23 9.53 Desi-Strip Inserts 40 3
M71-45-422 500 38.10 9.53 Location ID 37 3
M71-45-430 500 38.10 9.53 Location ID 37 3
M71-68-430 750 6.10 3.81 Siemon Faceplates 4 2
M71-71-430 750 8.89 5.08 Siemon Faceplates 7 2
Order references beginning with “B” indicate bulk rolls.
For more information on our materials or to help you choose,
visit www.bradyeurope.com
www.bradyeurope.com 26
Datacom Labels
Racks, Panels and General Identification
• B-412 Polypropylene Tag
• B-422 Permanent Glossy Polyester
• B-423 Permanent Polyester
• B-430 Permanent Clear Polyester
Diagram Order
Reference
Labels
Per Roll
Label
Width
A (mm)
Label
Height
B (mm)
Application Max. Characters
per line
for 5 Points
Max. Lines
of Text
for 5 Points
BM71-20-422 1000 50.80 25.40 Racks, Panels & General ID 46 10
M71-20-483 100 50.80 25.40 Racks, Panels & General ID 46 10
M71-23-483 100 101.60 25.40 Racks, Panels & General ID 50 9
M71-30-483 250 38.10 19.05 Racks, Panels & General ID 37 8
M71-31-483 250 38.10 25.40 Racks, Panels & General ID 37 10
M71-37-422 100 76.20 48.26 Racks, Panels & General ID 50 20
M71-37-483 100 76.20 48.26 Racks, Panels & General ID 50 20
M71-38-483 100 101.60 48.26 Racks, Panels & General ID 50 20
M71-61-483 100 12.70 50.80 Racks, Panels & General ID 50 5
M71-65-483 250 34.93 25.40 Racks, Panels & General ID 35 10
M71C-230-412 1 (cont.) 5.84 15.24 m Racks, Panels & General ID 50 2
M71C-375-412 1 (cont.) 9.53 15.24 m Racks, Panels & General ID 50 3
M71C-375-422 1 (cont.) 9.53 15.24 m Closet Hardware Labels, Racks, Panels & General ID 50 3
M71C-375-430 1 (cont.) 9.53 15.24 m Closet Hardware Labels, Racks, Panels & General ID 50 3
M71C-500-412 1 (cont.) 12.70 15.24 m Racks, Panels & General ID 50 5
M71C-500-422 1 (cont.) 12.70 15.24 m Racks, Panels & General ID 50 5
M71C-500-430 1 (cont.) 12.70 15.24 m Racks, Panels & General ID 50 5
M71C-500-483 1 (cont.) 12.70 15.24 m Racks, Panels & General ID 50 5
M71C-785-412 1 (cont.) 19.94 15.24 m Racks, Panels & General ID 50 8
M71C-1000-422 1 (cont.) 25.40 15.24 m Racks, Panels & General ID 50 10
M71C-1000-430 1 (cont.) 25.40 15.24 m Racks, Panels & General ID 50 5
M71C-1000-483 1 (cont.) 25.40 15.24 m Racks, Panels & General ID 50 10
M71C-1900-483 1 (cont.) 48.26 15.24 m Racks, Panels & General ID 50 10
Order references beginning with “B” indicate bulk rolls.
Bulk Packaging
Bulk labels are designed for the BMP™71 Label Printer as a
cost-effective solution for high volume labelling needs.
Order references beginning with “B” indicate bulk rolls.
27
www.bradyeurope.com
Circuit Board and Component Indentification Labels
Order
Reference
Labels
Per Roll
Width
A (mm)
Height
B (mm)
Max. Characters
per line
for 5 Points
Max. Lines
of Text
for 5 Points
Max.
Bar Code
Characters**
Through Hole
Technology SMT
Top/Bottom
After
ProcessTop Bottom
M71-2-477 100 6.35 50.80 41 2 23*
M71-3-457 500 9.53 9.53 7 3 1
M71-4-478 500 10.16 10.16 8 4 2
M71-9-426 750 16.51 5.08 13 2 5*
M71-9-478 750 16.51 5.08 13 2 5*
M71-10-457 750 19.05 6.35 15 2 6*
M71-13-426 750 22.86 6.35 18 2 8*
M71-14-477 750 25.40 4.75 20 1 10
M71-16-426 500 25.40 9.53 20 4 10
M71-16-457 500 25.40 9.53 20 4 10
M71-17-426 500 25.40 12.70 20 5 10
M71-25-478 750 31.75 6.35 26 2 13*
M71-28-426 750 38.10 6.35 31 2 17*
Order
Reference
Labels
Per Roll
Width
A (mm)
Height
B (mm)
Max. Characters
per line
for 5 Points
Max. Lines
of Text
for 5 Points
Max.
Bar Code
Characters**
Through Hole
Technology SMT
Top/Bottom
After
ProcessTop Bottom
M71-10-437 750 19.05 6.35 15 2 6*
M71-15-437 750 25.40 6.99 20 2 10*
M71-29-437 500 38.10 12.70 31 5 17
Polyimides
• B-426 High Temperature Amber Polyimide:
Withstands extremely high temperatures
• B-457 High Temperature White Polyimide:
good contrast and smear resistance
• B-477 Static Dissipative Polyimide:
Static dissipative adhesive and liner
• B-478 Static Dissipative Polyimide:
Static dissipative adhesive and liner; low profile
Tedlar®
• B-437 Flame-Retardant White Tedlar®
Tedlar® is a registered trademark of DuPont.
Yes, this material will work with this application. No, this material does not work with this application. In extreme high temperatures, testing of these materials is recommended.
Material to Circuit Board Process Cross Reference Guide
Through Hole Technology Surface Mount Technology (SMT) After Process
Brady material number (B-number) Top Bottom Top or Bottom
B-426 B-457 B-478 B-479 YES YES YES YES
B-422 B-423 B-428 B-437 YES* NO NO YES
B-459 B-473 B-498*
*In extreme high temperatures, testing of these materials is recommended.
*No human readable characters below / above barcode **Values for barcode 128, width 2 Dot, ratio 2:1
*No human readable characters below / above barcode **Values for barcode 128, width 2 Dot, ratio 2:1
www.bradyeurope.com 28
Circuit Board and Component Indentification Labels
Order
Reference
Labels
Per Roll
Width
A (mm)
Height
B (mm)
Max. Characters
per line
for 5 Points
Max. Lines
of Text
for 5 Points
Max.
Bar Code
Characters**
Through Hole
Technology SMT
Top/Bottom
After
ProcessTop Bottom
M71-1-423 750 6.35 6.35 5 2 0
M71-2-423 100 50.80 6.35 41 2 23*
M71-3-423 500 9.53 9.53 7 3 0
M71-4-423 500 10.16 10.16 8 4 0
M71-5-423 750 12.70 5.08 11 1 3
M71-6-423 750 12.70 6.99 11 2 3
M71-6-473 750 12.70 6.99 11 2 3
M71-7-423 500 12.70 12.70 10 5 3
BM71-7-423 5000 12.70 12.70 10 5 3
M71-9-423 750 16.51 5.08 13 2 5*
M71-9-473 750 16.51 5.08 13 2 5*
M71-10-423 750 19.05 6.35 15 2 6*
M71-10-473 750 19.05 6.35 15 2 6*
M71-13-423 750 22.86 6.35 18 2 8*
M71-14-423 750 25.40 4.75 20 1 10
M71-15-423 750 25.40 6.99 20 2 10
M71-15-428 750 25.40 6.99 20 2 10
M71-16-423 500 25.40 9.53 20 4 10
BM71-16-423 5000 25.40 9.53 20 4 10
M71-16-473 500 25.40 9.53 20 4 10
M71-17-423 500 25.40 12.70 20 5 10
BM71-17-423 5000 25.40 12.70 20 5 10
M71-17-428 500 25.40 12.70 20 5 10
M71-17-473 500 25.40 12.70 20 5 10
M71-19-423 250 25.40 25.40 20 10 10
BM71-19-423 2500 25.40 25.40 20 10 10
M71-20-423 100 50.80 25.40 41 10 23
BM71-20-423 1000 50.80 25.40 41 10 23
M71-20-459 100 50.80 25.40 41 10 23
M71-25-423 750 31.75 6.35 26 2 13*
M71-26-423 100 69.85 31.75 57 12 32
M71-27-423 750 38.10 3.18 31 1 17
M71-28-423 750 38.10 6.35 31 2 17
M71-28-473 750 38.10 6.35 31 2 17
M71-29-423 500 38.10 12.70 31 5 17
BM71-29-423 5000 38.10 12.70 31 5 17
M71-29-459 500 38.10 12.70 31 5 17
M71-30-459 250 38.10 19.05 31 8 17
M71-37-423 100 76.20 48.26 60 19 35
M71-38-423 100 101.60 48.26 82 19 47
M71C-500-423 1 (cont.) 12.70 15.24 m 50 5
Polyester
• B-423, B-459 Permanent White Polyester:
• B-428 Permanent Metallised Polyester:
• B-473 Static Dissipative Polyester:
Static dissipative adhesive and liner
Order
Reference
Labels
Per Roll
Width
A (mm)
Height
B (mm)
Max. Characters
per line
for 5 Points
Max. Lines
of Text
for 5 Points
Max.
Bar Code
Characters**
Through Hole
Technology SMT
Top/Bottom
After
ProcessTop Bottom
M71-7-498 500 12.70 12.70 10 5 3
M71-10-498 750 19.05 6.35 15 2 6*
M71-16-498 500 25.40 9.53 20 4 10
M71-17-498 500 25.40 12.70 20 5 10
BM71-29-498 5000 38.10 12.70 31 5 17
M71-29-498 500 38.10 12.70 31 5 17
M71-32-498 250 38.10 38.10 37 16 17
Vinyl Cloth
• B-498 White Vinyl Cloth:
with repositionable adhesive
Yes, this material will work with this application. No, this material does not work with this application. In extreme high temperatures, testing of these materials is recommended.
Order references beginning with “B” indicate bulk rolls.
Order references beginning with “B” indicate bulk rolls.
*No human readable characters below / above barcode **Values for barcode 128, width 2 Dot, ratio 2:1
*No human readable characters below / above barcode **Values for barcode 128, width 2 Dot, ratio 2:1
29
www.bradyeurope.com
Security Identification Labels
Self-Laminating Labels
• B-427 Vinyl: excellent abrasion and smudge resistance.
• B-461 Polyester: resistant to extreme temperatures
(-196°C to 130°C)
AW = All White (no transparent area) – YL = Yellow
Freezer
Liquid nitrogen
Autoclave
Hot water (100°C) bath
Diagram Order
Reference
Labels
Per
Roll
Label
Width
A (mm)
Label
Height
B (mm)
Write-On
Height
C (mm)
Environment Application Vial/Tube size
M71-19-427 250 25.40 25.40 9.53 Straws 0.25 mL Straw
BM71-19-427 2500 25.40 25.40 9.53 Straws 0.2 5mL Straw
M71-19-427-YL 250 25.40 25.40 9.53 Straws 0.25 mL Straw
M71-21-427 100 25.40 63.50 19.53 Straws 0.5 ml Straw
BM71-21-427 1000 25.40 63.50 19.53 Straws 0.5 ml Straw
M71-21-427-YL 100 25.40 63.50 19.53 Straws 0.5 ml Straw
M71-30-427-AW 250 38.10 19.05 – Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0 ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
BM71-30-427 2500 19.05 38.10 12.70 Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0 ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
BM71-75-461 1000 66.68 25.40 25.40 Cryo Vial 1.0 - 8.0 ml Vial/Tube
Diagram Order
Reference
Labels
Per Roll
Colour Width
A (mm)
Height
B (mm)
Max. Characters per line
for 5 Points
Max. Lines of Text
for 5 Points
Surface
Suitability
M71-17-351 500 White 25.40 12.70 20 5
M71-17-352 500 Silver 25.40 12.70 20 5
M71-20-351 100 White 50.80 25.40 46 10
M71-20-352 100 Silver 50.80 25.40 46 10
M71-31-351 250 White 38.10 25.40 37 10
M71-31-352 250 Silver 38.10 25.40 37 10
M71-37-351 100 White 76.20 48.26 50 20
M71-37-352 100 Silver 76.20 48.26 50 20
M71C-500-530 1 (cont.) White 12.70 15.24 m 50 2
M71C-1000-530 1 (cont.) White 25.40 15.24 m 50 5
M71C-2000-530 1 (cont.) White 50.80 15.24 m 50 10
Tamper Indicating Labels
• B-351 Tamper-Resistant White Vinyl
• B-352 Tamper-Resistant Metallised Vinyl
• B-530 Tamper-Resistant White Vinyl
Laboratory Identification Labels
Material suitable for smooth surfaces. Material suitable for smooth and textured surfaces. Material suitable for smooth, textured and highly textured surfaces.
Order references beginning with “B” indicate bulk rolls.
www.bradyeurope.com 30
Laboratory Identification
Vinyl & Nylon Cloth Labels
• B-498 Vinyl Cloth:
repositionable adhesive
• B-499 Nylon Cloth:
high adhesion
Polyester Labels
• B-423 Glossy White Polyester
• B-430 Glossy Clear Polyester
• B-488 Matt White Polyester
Diagram Order
Reference
Labels
Per
Roll
Label
Width
A (mm)
Label
Height
B (mm)
Label
Diameter
C (mm)
Environment Application Vial/Tube size
M71-11-498 500 12.70 19.05 - Centrifuge, Eppendorf, PCR Tube 0.5 - 0.7ml Tube
BM71-11-498 5000 12.70 19.05 - Centrifuge, Eppendorf, PCR Tube 0.5 - 0.7ml Tube
M71-11-499 500 12.70 19.05 - Centrifuge, Eppendorf, PCR Tube, Cryo Vial 0.5 - 0.7ml Tube – 0.6ml Vial/Tube
M71-16-498 500 9.53 25.40 - Centrifuge, Eppendorf, PCR Tube 0.5 - 0.7ml Tube
M71-16-499 500 9.53 25.40 - Centrifuge, Eppendorf, PCR Tube 0.5 - 0.7ml Tube
M71-17-498 500 25.40 12.70 - Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
M71-29-498 500 38.10 12.70 - Conical Tube, Cryo Vial, Bottles, Petri Dish, Deep
Well Plate
12.0 - 24.0ml Vial/Tube
50.0ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
BM71-29-498 5000 12.70 38.10 - Cryo Vial, Conical Tube, Bottles, Petri Dish, Deep
Well Plate
12.0 - 24.0ml Vial/Tube
50.0ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
M71-29-499 500 12.70 38.10 - Conical Tube, Cryo Vial, Bottles, Petri Dish, Deep
Well Plate
12.0 - 24.0ml Vial/Tube
50.0ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
M71-30-499 250 19.05 38.10 - Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
M71-31-498 250 25.40 38.10 - Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
M71-31-499 250 25.40 38.10 - Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
M71-78-499 250 48.26 25.40 - Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
M71-81-499 750 48.26 6.35 - Well Plate
M71-82-499 500 - - 9.53 Vial Top 0.6 - 1.5ml Vial/Tube
M71-83-499 500 - - 9.53 Vial Top 1.0 - 2.0ml Vial/Tube
M71-84-499 500 22.86 12.70 - Centrifuge, Cryo Vial, Eppendorf, PCR Tube 0.5 - 0.7ml Tube – 1.5 - 2.0ml Tube
0.6 ml Vial/Tube – 1.0 - 8.0ml Vial/Tube
M71-98-499 500 25.40 9.53 9.53 Centrifuge, Cryo Vial, Eppendorf, PCR Tube, Vial,
Vial Top
0.5 - 0.7ml Tube – 1.0 - 8.0ml Vial/Tube
0.6 - 1.5ml Vial/Tube
Diagram Order
Reference
Labels
Per
Roll
Label
Width
A (mm)
Label
Height
B (mm)
Environment Application Vial/Tube size
M71-2-423 100 50.80 6.35 Well Plate
M71-7-423 500 12.70 12.70 Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0 ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
BM71-7-423 5000 12.70 12.70 Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0 ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
M71-14-423 750 25.40 4.75 Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0 ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
M71-15-423 750 25.40 6.99 Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0 ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
M71-17-423 500 25.40 12.70 Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0 ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
M71-17-430 500 25.40 12.70 Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0 ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
M71-20-423 100 50.80 25.40 Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
BM71-20-423 1000 50.80 25.40 Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
M71-22-423 100 76.20 25.40 Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
M71-31-423 250 38.10 25.40 Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0 ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
M71-80-488 250 19.05 22.86 Slide
M71-81-488 750 48.26 6.35 Well Plate
M71-97-488 250 22.86 22.86 Slide
M71C-500-430 1 (cont.) 12.70 15.24M Conical Tube, Bottles, Petri Dish, Deep Well Plate 50.0 ml Conical Tube/Bottles/Petri Dish/Deep Well Plate
Order references beginning with “B” indicate bulk rolls.
Order references beginning with “B” indicate bulk rolls.
BRADY Belgium
Industriepark C/3
Lindestraat 20
9240 Zele
Tel. +32 (0) 52 45 78 11
Fax +32 (0) 52 45 78 12
BRADY Denmark
Svendborgvej 39B
5260 Odense S
Tel. +45 66 14 44 00
Fax +45 66 14 44 50
BRADY France
Parc EUROCIT
45, avenue de l’Europe
59436 Roncq Cedex
Tel. +33 (0) 3 20 01 08 70
Fax +33 (0) 3 20 01 08 76
BRADY Germany
Büchenhöfe 2
63329 Egelsbach
Tel. +49 (0) 6103 7598 660
Fax +49 (0) 6103 7598 670
BRADY Hungary
Puskás Tivadar u. 4.
2040 Budaörs
Tel. +36 23 500 275
Fax +36 23 500 276
© 2010 Brady Worldwide, Inc. All Rights Reserved.
www.bradyeurope.com
BRADY Italy
Via Pitagora 18
20128 Milano
Tel. +39 02 26 00 00 22
Fax +39 02 25 75 351
BRADY Middle-East
PO BOX 18015
Jebel Ali, Dubai, UAE
Tel. +971 4881 2524
Fax +971 4881 3183
BRADY Norway
Breivika Industrivei 9
6018 Ålesund
Tel. +47 70 19 10 30
Fax +47 70 19 05 67
Brady Slovakia
Na Pántoch 18
831 06 Bratislava
Tel. +421 2 3300 4800
Fax +421 2 3300 4801
BRADY Spain
Carretera de Barcelona, 88
Esc B Entresuelo 9C
08302 Mataro
Tel. +34 900 902 993
Fax +34 900 902 994
Brady Sweden
Vallgatan 5
170 67 Solna
Tel. +46 (0) 8 590 057 30
Fax +46 (0) 8 590 818 68
BRADY Turkey
Selvili Sok. No: 3/4
4.Levent Istanbul 34330
Tel. +90 212 264 02 20 / 264 02 21
Fax +90 212 270 83 19
BRADY United Kingdom
Wildmere Industrial Estate
Banbury, Oxon – OX16 3JU
Tel. +44 (0) 1295 228 288
Fax +44 (0) 1295 228 100
BRADY WORLDWIDE
Africa . . . . . . . . . . . . . . . . . . . . . . 971-4881-2524
Australia . . . . . . . . . . . . . . . . . . . 612-8717-6300
Brazil . . . . . . . . . . . . . . . . . . . . 55-11-3686-4720
Canada . . . . . . . . . . . . . . . . . . . . 1-800-263-6179
China (Beijing) . . . . . . . . . . . . . 86-10-6788-7799
China (Shanghai) . . . . . . . . . . . 86-21-6886-3666
China (Wuxi) . . . . . . . . . . . . . . 86-510-528-2222
Hong Kong . . . . . . . . . . . . . . . . . . 852-2359-3149
Japan . . . . . . . . . . . . . . . . . . . . . 81-45-461-3600
Korea . . . . . . . . . . . . . . . . . . . . . 82-31-451-6600
Latin America. . . . . . . . . . . . . . . 1-414-540-5560
Malaysia . . . . . . . . . . . . . . . . . . . 60-4-646-2700
Mexico ......................525-399-6963
New-Zealand . . . . . . . . . . . . . . . 61-2-8717-2200
Philippines . . . . . . . . . . . . . . . . . . 63-2-658-2077
Singapore . . . . . . . . . . . . . . . . . . . 65-6477-7261
Taiwan . . . . . . . . . . . . . . . . . . . . 886-3-327-7788
Thailand . . . . . . . . . . . . . . . . . . . . 66-2-793-9200
U.S.A. . . . . . . . . . . . . . . . . . . . . . 1-800-537-8791
Your distributor
Brady Corporation
“Our mission is to provide innovative identification solutions
which improve safety, security, productivity and performance
for customers worldwide.”
Company Overview
Brady was founded in 1914 in Eau Claire, Wisconsin,
as W.H. Brady Co., and renamed Brady Corporation
in 1998. The company began selling products
internationally in 1947. In 1984, Brady went public,
with stock trading on the Nasdaq Stock Market, and
in 1999, moved trading of its stock to the New York
Stock Exchange, where it trades under the symbol
BRC. The company’s global headquarters is in
Milwaukee, Wisconsin.
Brady manufactures and markets:
• products for identification and safety applications
such as signs and markers, and the printers and
software to produce them
• products for wire identification, including labelling
materials and tools for wire and cable marking in
the electrical and telecommunication markets
• high-performance identification products, including
labels and signs that remain legible and highly
adhesive even in harsh environments
• precision die-cut parts, including custom die-cut
and slit materials for use in cellular phones, pagers,
computer disk drives and automotive electronic
components
Operations – Some facts:
• 7000 employees around the world
• Operations in 26 countries
• Distribution in more than 100 countries through
more than 4,400 distributor partners
EUR-M-710-EN
