SMCJ5.0 thru SMCJ188CA Vishay General Semiconductor Surface Mount TRANSZORB(R) Transient Voltage Suppressors FEATURES * Low profile package * Ideal for automated placement * Glass passivated chip junction * Available in Unidirectional and Bidirectional * Excellent clamping capability * Very fast response time * Low incremental surge resistance * Meets MSL level 1, per J-STD-020C, LF max peak of 260 C DO-214AB (SMC) * Solder Dip 260 C, 40 seconds * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC MAJOR RATINGS AND CHARACTERISTICS VWM 5.0 V to 188 V PPPM 1500 W PD 6.5 W IFSM (Unidirectional only) 200 A Tj max. 150 C DEVICES FOR BIDIRECTION APPLICATIONS For bidirectional devices use C or CA suffix (e.g. SMCJ188CA). Electrical characteristics apply in both directions. TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. MECHANICAL DATA Case: DO-214AB (SMCJ) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade, HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: For unidirectional types the band denotes cathode end, no marking on bidirectional types MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 s waveform (1,2) Peak pulse current with a 10/1000 s waveform (1) (2) SYMBOL VALUE UNIT PPPM Minimum 1500 W IPPM see next table A IFSM 200 A Power dissipation on infinite heatsink, TA = 50 C PD 6.5 W Operating junction and storage temperature range TJ, TSTG - 55 to + 150 C Peak forward surge current 8.3 ms single half sine-wave uni-directional only Note: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 C per Fig. 2 (2) Mounted on 0.31 x 0.31" (8.0 x 8.0 mm) copper pads to each terminal Document Number 88394 26-Feb-07 www.vishay.com 1 SMCJ5.0 thru SMCJ188CA Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) DEVICE TYPE MODIFIED "J" BEND LEAD (+)SMCJ5.0 (+)SMCJ5.0A(5) (+)SMCJ6.0 (+) SMCJ6.0A SMCJ6.5 (+)SMCJ6.5A (+)SMCJ7.0 (+)SMCJ7.0A (+) SMCJ7.5 (+) SMCJ7.5A (+)SMCJ8.0 (+)SMCJ8.0A (+)SMCJ8.5 (+) SMCJ8.5A (+) SMCJ9.0 (+)SMCJ9.0A (+)SMCJ10 (+)SMCJ10A (+)SMCJ11 (+) SMCJ11A (+)SMCJ12 (+)SMCJ12A (+)SMCJ13 (+)SMCJ13A (+) SMCJ14 (+) SMCJ14A (+)SMCJ15 (+)SMCJ15A (+)SMCJ16 (+) SMCJ16A (+) SMCJ17 (+)SMCJ17A (+) SMCJ18 (+) SMCJ18A (+) SMCJ20 (+) SMCJ20A (+)SMCJ22 (+)SMCJ22A (+)SMCJ24 (+) SMCJ24A (+) SMCJ26 (+)SMCJ26A (+)SMCJ28 (+)SMCJ28A (+)SMCJ30 (+) SMCJ30A (+) SMCJ33 (+)SMCJ33A (+)SMCJ36 (+)SMCJ36A (+) SMCJ40 (+) SMCJ40A (+) www.vishay.com 2 DEVICE MARKING CODE UNI GDD GDE GDF GDG GDH GDK GDL GDM GDN GDP GDQ GDR GDS GDT GDU GDV GDW GDX GDY GDZ GED GEE GEF GEG GEH GEK GEL GEM GEN GEP GEQ GER GES GET GEU GEV GEW GEX GEY GEZ GFD GFE GFF GFG GFH GFK GFL GFM GFN GFP GFQ GFR BI GDD GDE GDF GDG BDH BDK GDL GDM BDN BDP BDG BDR BDS BDT BDU BDV BDW BDX GDY GDZ BED BEE GEF GEG BEH BEK BEL BEM GEN GEP GEQ GER BES BET BEU BEV BEW BEX BEY BEZ BFD BFE BFF BFG BFH BFK BFL BFM BFN BFP BFQ BFR BREAKDOWN VOLTAGE V(BR) AT IT (1) (V) MIN 6.40 6.40 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.0 10.0 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 22.2 24.4 24.4 26.7 26.7 28.9 28.9 31.1 31.1 33.3 33.3 36.7 36.7 40.0 40.0 44.4 44.4 MAX 7.82 7.07 8.15 7.37 8.82 7.98 9.51 8.60 10.2 9.21 10.9 9.83 11.5 10.4 12.2 11.1 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 29.8 26.9 32.6 29.5 35.3 31.9 38.0 34.4 40.7 36.8 44.9 40.6 48.9 44.2 54.3 49.1 TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 30 33 33 36 36 40 40 MAXIMUM REVERSE LEAKAGE AT VWM MAXIMUM PEAK PULSE SURGE CURRENT ID (A) (3) IPPM (A) (2) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 1000 1000 1000 1000 500 500 200 200 100 100 50 50 20 20 10 10 5.0 5.0 5.0 5.0 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 156.3 163.0 131.6 145.6 122.0 133.9 112.8 125.0 104.9 116.3 100.0 110.3 94.3 104.2 88.8 97.4 79.8 88.2 74.6 82.4 68.2 75.4 63.0 69.8 58.1 64.7 55.8 61.5 52.1 57.7 49.2 54.3 46.6 51.4 41.9 46.3 38.1 42.3 34.9 38.6 32.2 35.6 30.0 33.0 28.0 31.0 25.4 28.1 23.3 25.8 21.0 23.3 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 71.4 64.5 Document Number 88394 26-Feb-07 SMCJ5.0 thru SMCJ188CA Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) DEVICE TYPE MODIFIED "J" BEND LEAD (+)SMCJ43 (+) SMCJ43A (+) SMCJ45 (+)SMCJ45A (+)SMCJ48 (+)SMCJ48A (+) SMCJ51 (+) SMCJ51A (+)SMCJ54 (+)SMCJ54A (+)SMCJ58 (+)SMCJ58A (+) SMCJ60 (+)SMCJ60A (+)SMCJ64 (+)SMCJ64A (+)SMCJ70 (+) SMCJ70A (+) SMCJ75 (+)SMCJ75A (+)SMCJ78 (+)SMCJ78A (+) SMCJ85 (+) SMCJ85A (+) SMCJ90 (+) SMCJ90A (+) SMCJ100 (+) SMCJ100A (+) SMCJ110 (+) SMCJ110A (+) SMCJ120 (+) SMCJ120A (+) SMCJ130 (+) SMCJ130A (+)SMCJ150 (+)SMCJ150A (+)SMCJ160 (+)SMCJ160A (+) SMCJ170 (+) SMCJ170A SMCJ188 SMCJ188A DEVICE MARKING CODE UNI GFS GFT GFU GFV GFW GFX GFY GFZ GGD GGE GGF GGG GGH GGK GGL GGM GGN GGP GGQ GGR GGS GGT GGU GGV GGW GGX GGY GGZ GHD GHE GHF GHG GHH GHK GHL GHM GHN GHP GHQ GHR GHT GHS BI BFS BFT GFU GFV GFW GFX GFY GFZ GGD GGE GGF GGG GGH GGK GGL GGM GGN GGP GGQ GGR GGS GGT GGU GGV GGW GGX GGY GGZ GHD GHE GHF GHG GHH GHK GHL GHM GHN GHP GHQ GHR GHT GHS BREAKDOWN VOLTAGE V(BR) AT IT (1) (V) MIN 47.8 47.8 50.0 50.0 53.3 53.3 56.7 56.7 60.0 60.0 64.4 64.4 66.7 66.7 71.1 71.1 77.8 77.8 83.3 83.3 86.7 86.7 94.4 94.4 100 100 111 111 122 122 133 133 144 144 167 167 178 178 189 189 209 209 MAX 58.4 52.8 61.1 55.3 65.1 58.9 69.3 62.7 73.3 66.3 78.7 71.2 81.5 73.7 86.9 78.6 95.1 86.0 102 92.1 106 95.8 115 104 122 111 136 123 149 135 163 147 176 159 204 185 218 197 231 209 255 231 TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 43 43 45 45 48 48 51 51 54 54 58 58 60 60 64 64 70 70 75 75 78 78 85 85 90 90 100 100 110 110 120 120 130 130 150 150 160 160 170 170 188 188 MAXIMUM REVERSE LEAKAGE AT VWM MAXIMUM PEAK PULSE SURGE CURRENT ID (A) (3) IPPM (A) (2) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 19.6 21.6 18.7 20.6 17.5 19.4 16.5 18.2 15.6 17.2 14.6 16.0 14.0 15.5 13.2 14.6 12.0 13.3 11.2 12.4 10.8 11.9 9.9 10.9 9.4 10.3 8.4 9.3 7.7 8.5 7.0 7.8 6.5 7.2 5.6 6.2 5.2 5.8 4.9 5.5 4.4 4.6 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103 93 107 96 114 103 125 113 134 121 139 126 151 137 160 146 179 162 196 177 214 193 231 209 268 243 287 259 304 275 344 328 Note: (1) Pulse test: tp 50 ms (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) For bi-directional types having VWM of 10 Volts and less, the ID limit is doubled (4) All terms and symbols are consistent with ANSI/IEEE C62.35 (5) For the bi-directional SMCJ5.0CA, the maximum V(BR) is 7.25 V (6) VF = 3.5 V at IF = 100 A (uni-directional only) (+) Underwriters Laboratory Recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number E136766 for both uni-directional and bi-directional devices Document Number 88394 26-Feb-07 www.vishay.com 3 SMCJ5.0 thru SMCJ188CA Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER Typical thermal resistance junction to ambient air SYMBOL VALUE UNIT RJA 75 C/W RJL 15 C/W (1) Typical thermal resistance junction to leads Note: (1) Mounted on minimum recommended pad layout ORDERING INFORMATION PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SMCJ5.0A-E3/57T 0.211 57T 850 7" Diameter Plastic Tape & Reel SMCJ5.0A-E3/9AT 0.211 9AT 3500 13" Diameter Plastic Tape & Reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 150 IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) 100 10 1 0.31 x 0.31" (8.0 x 8.0 mm) Copper Pad Areas Tj = 25 C Pulse Width (td) is defined as the point where the peak current decays to 50 % of IPPM tr = 10 sec Peak Value IPPM 100 Half Value - IPP 2 IPPM 50 10/1000 sec Waveform as defined by R.E.A. td 0 1.0 s 10 s 100 s 1.0 ms 0 10 ms 1.0 2.0 3.0 td - Pulse Width (s) t - Time (ms) Figure 1. Peak Pulse Power Rating Curve Figure 3. Pulse Waveform 100 4.0 20000 Measured at Zero Bias 10000 CJ - Junction Capacitance (pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % 0.1 0.1 s 75 50 25 1000 VR, Measured at Stand-off Voltage VWM 100 Uni-Directional Bi-Directional Tj = 25 C f = 1.0 MHz Vsig = 50 mVp-p 10 0 0 25 50 75 100 125 150 175 200 TJ - Initial Temperature (C) Figure 2. Pulse Power or Current versus Initial Junction Temperature www.vishay.com 4 1 10 100 400 VWM - Reverse Stand-off Voltage (V) Figure 4. Typical Junction Capacitance Uni-Directional Document Number 88394 26-Feb-07 SMCJ5.0 thru SMCJ188CA Vishay General Semiconductor 200 Peak Forward Surge Current (A) Transient Thermal Impedance (C/W) 100 10 1.0 0.1 0.001 100 Tj = Tj max. 8.3 ms Single Half Sine-Wave 10 0.01 0.1 1 10 100 1 1000 10 100 Number of Cycles at 60 Hz tp - Pulse Duration (s) Figure 5. Typical Transient Thermal Impedance Figure 6. Maximum Non-Repetitive Forward Surge Current Uni-Directional Use Only PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AB (SMC J-Bend) Mounting Pad Layout Cathode Band 0.185 MAX. (4.69 MAX.) 0.126 (3.20) 0.246 (6.22) 0.220 (5.59) 0.114 (2.90) 0.280 (7.11) 0.126 MIN. (3.20 MIN.) 0.060 MIN. (1.52 MIN.) 0.260 (6.60) 0.012 (0.305) 0.006 (0.152) 0.320 REF 0.103 (2.62) 0.079 (2.06) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.320 (8.13) 0.305 (7.75) Document Number 88394 26-Feb-07 www.vishay.com 5 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1