AOWF11N60 600V,11A N-Channel MOSFET General Description Product Summary The AOWF11N60 has been fabricated using an advanced high voltage MOSFET process that is designed to deliver high levels of performance and robustness in popular AC-DC applications.By providing low RDS(on), Ciss and Crss along with guaranteed avalanche capability this device can be adopted quickly into new and existing offline power supply designs. VDS ID (at VGS=10V) 700V@150 11A RDS(ON) (at VGS=10V) < 0.65 100% UIS Tested 100% Rg Tested TO-262F Bottom View Top View D G S G D S D G S AOWF11N60 Absolute Maximum Ratings TA=25C unless otherwise noted Parameter Symbol Drain-Source Voltage VDS Gate-Source Voltage VGS TC=25C Continuous Drain Current Pulsed Drain Current TC=100C C AOWF11N60 600 Units V 30 V 11* ID 8* A IDM 39 Avalanche Current C IAR 4.8 A Repetitive avalanche energy C EAR 345 mJ Single plused avalanche energy G Peak diode recovery dv/dt TC=25C Power Dissipation B Derate above 25oC EAS dv/dt 690 5 27.8 mJ V/ns W 0.22 -55 to 150 W/ oC C 300 C AOWF11N60 65 4.5 Units C/W C/W PD TJ, TSTG Junction and Storage Temperature Range Maximum lead temperature for soldering TL purpose, 1/8" from case for 5 seconds Thermal Characteristics Parameter Symbol Maximum Junction-to-Ambient A,D RJA Maximum Junction-to-Case RJC * Drain current limited by maximum junction temperature. Rev 0: Jan 2012 www.aosmd.com Page 1 of 5 AOWF11N60 Electrical Characteristics (TJ=25C unless otherwise noted) Symbol Parameter Conditions Min ID=250A, VGS=0V, TJ=25C 600 Typ Max Units STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage BVDSS /TJ Breakdown Voltage Temperature Coefficient IDSS Zero Gate Voltage Drain Current IGSS Gate-Body leakage current VDS=0V, VGS=30V VGS(th) Gate Threshold Voltage VDS=5V ID=250A ID=250A, VGS=0V, TJ=150C 700 V ID=250A, VGS=0V 0.67 V/ oC VDS=600V, VGS=0V 1 VDS=480V, TJ=125C 10 100 3.3 A 3.9 4.5 n V 0.65 1 V RDS(ON) Static Drain-Source On-Resistance VGS=10V, ID=5.5A 0.56 gFS Forward Transconductance VDS=40V, ID=5.5A 12 VSD Diode Forward Voltage IS=1A,VGS=0V IS Maximum Body-Diode Continuous Current 11 A ISM Maximum Body-Diode Pulsed Current 39 A DYNAMIC PARAMETERS Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance VGS=0V, VDS=25V, f=1MHz VGS=0V, VDS=0V, f=1MHz SWITCHING PARAMETERS Total Gate Charge Qg Qgs Gate Source Charge S 0.73 1320 1656 1990 pF 100 146 195 pF 6.5 11.2 16 pF 1.7 3.5 5.3 24 30.6 37 VGS=10V, VDS=480V, ID=11A nC 9.6 nC Qgd Gate Drain Charge 9.6 nC tD(on) Turn-On DelayTime 39 ns tr Turn-On Rise Time 58 ns tD(off) Turn-Off DelayTime tf trr Turn-Off Fall Time IF=11A,dI/dt=100A/s,VDS=100V 400 500 600 Qrr Body Diode Reverse Recovery Charge IF=11A,dI/dt=100A/s,VDS=100V 4.7 5.9 7.1 Body Diode Reverse Recovery Time VGS=10V, VDS=300V, ID=11A, RG=25 92 ns 42 ns ns C A. The value of R JA is measured with the device in a still air environment with T A =25C. B. The power dissipation PD is based on TJ(MAX)=150C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150C, Ratings are based on low frequency and duty cycles to keep initial TJ =25C. D. The R JA is the sum of the thermal impedence from junction to case R JC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300 s pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-case thermal impedence which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of TJ(MAX)=150C. The SOA curve provides a single pulse rating. G. L=60mH, IAS=4.8A, VDD=150V, RG=25, Starting TJ=25C THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev0: Jan 2012 www.aosmd.com Page 2 of 5 AOWF11N60 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 20 100 10V -55C VDS=40V 6.5V 16 10 ID(A) ID (A) 12 6V 8 125C 1 4 25C VGS=5.5V 0 0.1 0 5 10 15 20 25 30 2 4 1.4 3 1.2 2.5 1.0 0.8 VGS=10V 0.6 4 8 12 16 10 20 VGS=10V ID=5.5A 2 1.5 1 0.5 0 -100 0.4 0 8 VGS(Volts) Figure 2: Transfer Characteristics Normalized On-Resistance RDS(ON) () VDS (Volts) Fig 1: On-Region Characteristics 6 24 ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage -50 0 50 100 150 200 Temperature (C) Figure 4: On-Resistance vs. Junction Temperature 1.0E+02 1.2 40 1.0E+00 IS (A) BVDSS (Normalized) 1.0E+01 1.1 1 125C 1.0E-01 1.0E-02 25C 1.0E-03 0.9 1.0E-04 0.8 -100 1.0E-05 -50 0 50 100 150 200 TJ (C) Figure 5:Break Down vs. Junction Temperature Rev0: Jan 2012 www.aosmd.com 0.0 0.2 0.4 0.6 0.8 1.0 VSD (Volts) Figure 6: Body-Diode Characteristics (Note E) Page 3 of 5 AOWF11N60 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 10000 15 VDS=480V ID=11A 12 Ciss Capacitance (pF) VGS (Volts) 1000 9 6 Coss 100 10 3 Crss 1 0 0 10 20 30 40 0.1 50 1 100 12 100 10s 1ms 1 10ms TJ(Max)=150C TC=25C 0.1 0.1s 1s DC 10 Current rating ID(A) 100s RDS(ON) limited 10 ID (Amps) 10 VDS (Volts) Figure 8: Capacitance Characteristics Qg (nC) Figure 7: Gate-Charge Characteristics 8 6 4 2 0.01 0 1 10 100 1000 0 VDS (Volts) 25 50 75 100 125 150 TCASE (C) Figure 10: Current De-rating (Note B) Figure 9: Maximum Forward Biased Safe Operating Area for AOWF11N60 (Note F) ZJC Normalized Transient Thermal Resistance 10 1 D=Ton/T TJ,PK=TC+PDM.ZJC.RJC RJC=4.5C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 0.1 PD 0.01 Ton T Single Pulse 0.001 1E-05 0.0001 0.001 0.01 0.1 1 10 100 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance for AOWF11N60 (Note F) Rev0: Jan 2012 www.aosmd.com Page 4 of 5 AOWF11N60 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + VDC - VDC DUT Qgs Vds Qgd - Vgs Ig Charge Res istive Switching Test Circuit & Waveforms RL Vds Vds DUT Vgs + VDC 90% Vdd - Rg 10% Vgs Vgs t d(on) tr t d(off) t on tf t off Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L EAR= 1/2 LI Vds 2 AR BVDSS Vds Id + Vgs Vgs VDC - Rg Vdd I AR Id DUT Vgs Vgs Diode Recovery Tes t Circuit & Waveforms Qrr = - Idt Vds + DUT Vgs Vds - Isd Vgs Ig Rev0: Jan 2012 L Isd + Vdd trr dI/dt IRM Vdd VDC - IF Vds www.aosmd.com Page 5 of 5