optical FEATURING 2016 High Performance Portfolio Optical & IC Selector Guide * TIAs * Laser & Modulator Drivers * Single-Lane CDRs * Dual-Lane CDRs www.semtech.com * Quad-Lane CDRs * Multi-Lane Signal Conditioners * ROSAs * Limiting Amplifiers * Transceiver ICs * Optical Reference Design Kits High Performance contents Overview 3 Semtech Solutions 4 New Products 5 Optical Application 6 Laser Drivers and Limiting Amplifiers 7 TIAs 8 Transceiver IC's (LD & LA) 10 Optical Module CDRs 11 ROSAs 12 Copper Application 14 Backplane & Linecard Signal Conditioners 15 Optical Module Reference Design Kit 16 Optical and Copper Products Semtech designs the industry's most innovative optical, analog and mixed signal semiconductor solutions to serve the rising global demand for highspeed data transmission products. Shipping more than 500 million Optical ICs, Semtech is an active contributor to networking standards development. This combination of real-world experience and industry leadership enables us to deliver the most complex solutions to our customers' designs. Semtech also offers one of the industry's most comprehensive portfolios of optical transceiver IC products ranging from 100Mb/s-100Gbps supporting such key industry standards as Fibre Channel, InfiniBand(R), Ethernet, CPRI, PON, SONET and PCI Express(R). Semtech is also investing in leading edge technologies to enable communication systems at 400Gbps and beyond. For optical component suppliers, this highly differentiated set of products provides a unique roadmap that improves performance and reliability, simplifies design, lowers costs and speeds time-to-market. For systems designers and manufacturers working on the next generation of high-speed networks, Semtech's multi-lane and multi-rate 10Gbps-100Gbps backplane solutions provide cost-effective, low power, high performance products to enable next-generation networks. 2 Semtech Optical & IC Selector Guide * 2016 Enabling High Performance, High-Speed * Class leading IC solutions for 100G applications in QSFP28, CFP4, CFP2 and CFP * Receive Optical Sub-Assembly (ROSA) based on Semtech's Rchip technology * Full portfolio of integrated solutions to address all SFP+ and XFP modules * Dual-lane CDRs (Tx/Rx) with integrated DML or EML driver * Low power, reference-free CDRs * Limiting amplifiers (LA) that provide wideband, low noise post-amplification * Transimpedence amplifiers (TIAs) that exceed the IEEE 10GbE Stressed Receiver Sensitivity (SRS) specifications * High performance, low power laser drivers * Full portfolio of integrated solutions for all PON applications including complete reference designs * Industry's first single-chip 10G PON transceivers for symmetric and asymmetric applications * Industry's first quad 10Gbps CDR, enabling long reach Infiniband(R) QDR, 40GbE and 100GbE applications * Protocol-independent repeaters/redrivers * SFP+ reference design kits for optical modules to decrease design time Building the Future Together As networking requirements continue to evolve, so will we, working with customers to provide solutions for tomorrow's networking challenges. One thing that won't change, however, is Semtech's commitment to being a reliable partner and providing innovative approaches that deliver unrivaled performance for the most sophisticated applications. www.semtech.com 3 Technology Leadership for the Future of Optical Communications TECHNOLOGIES MARKETS CDRs 100G ETHERNET Market leader in CDRs Solutions for QSFP28, CFPx and SFP28 modules Reference-Free operation Integrated solutions enable best performance and lowest power ROSAs Best-in-class sensitivity, based on our patented Rchip technology TIAs Industry leading performance and proved reliability with over 300 million sold LASER DRIVERS & LIMITING AMPS High performance integrated solutions for single and multi-channel applications 16G FIBRE CHANNEL Industry's first complete integrated IC solution for 16G Fibre Channel 10G Complete portfolio of module IC and backplane solutions Solutions for XFP, SFP+, QSFP+ modules PON/FTTH Industry's first fully integrated 10G PON solutions Highly integrated chipset solutions for EPON & GPON ONU/OLT 25G ETHERNET Market leading module IC and ROSA solutions for SFP28 4 Semtech Optical & IC Selector Guide * 2016 New Products GN2104S Low-Power Quad-CDR 25-28Gbps for optical modules * Low power dissipation (340mW typical) * Compact footprint ideal for QSFP28 and CFP4 modules GN2104 Low-Power Quad-CDR 25-28Gbps for optical modules * Low power dissipation (370mW typical) * Provides reference-free signal conditioning for CFP4 and QSFP28 modules GN2106A Low-Power Quad-CDR with integrated EML drivers 25-28Gbps * Fully monolithically integrated quad EML driver and CDRs * Provides reference-free signal conditioning for CFP4 and QSFP28 modules GN2504 Low-Power Quad-CDR 25-28Gbps Reference Free Repeater * Provides reference-free signal conditioning on backplanes and linecards * Low power dissipation (600mW typical) GN1185 High Performance Quad 28Gbps DML GN2108 Quad 25Gbps Transmitter Array for SR-4 * Integrated reference-free CDR and VCSEL array driver * Enable extended reach up to 300m on OM4, and 150m on OM3 GN2109 Quad 25Gbps Receiver Array for SR-4 * Integrated TIA array and reference-free CDR * 250um channel pitch GN3357 High Gain 11.3Gbps Linear APD ROSA * High gain linear AGC TIA optimized for DWDM * Low power dissipation, excellent sensitivity GN3358 High Gain 11.3Gbps Limiting APD ROSA * High output swing with pre-emphasis ideal for nonretimed applications * Low power dissipation, best in class sensitivity * Available with threshold adjust GN3270 28Gbps Limiting PIN ROSA * Low power dissipation (92mW) * For 25GbE SFP28 applications GN25L96 ONU Transceiver IC * 3.1Gbps combo SFP & PON BoB * Dual Loop Tx with EYEMAX Laser Driver * Quad low power diver for active TOSA * Max modulation/bias currents 55mA/70mA * Advanced eye-shaping features GN1081, GN1084 & GN1085 Low Power 28Gbps TIAs * Single (GN1081 and GN1084) and Quad (GN1085) versions * 20GHz Bandwidth * 105mW (typ) power dissipation per channel www.semtech.com GN25L98 ONU Transceiver IC * PON Combo IC with integrated APD bias controller * Single BOM can accommodate many different BOSA suppliers * Programmable APD fault detection, shutdown and recovery 5 Optical Applications Semtech products offer a comprehensive selection of optical transceiver ICs and components for all 1-10GbE, CPRI, OC-192 and 100G module form factors. 10G XFP Retimed SFP+ Module for < 40Km Applications CDR CDR - GN2042 GN2044/44S GN2040 TOSA LD LD- ROSA LA CDR GN1153 GN1160 GN1163 TIA TOSA ROSA TIA ROSA - GN3055 GN3155 GN3255 GN3358 GN2104 / GN2104S TIA - GN1052 GN1058 CDR LA - with slice level adjust CDR ROSA - GN3357 GN3358 GN2044 ROSA CDR CDR 6/8/10G SFP+ Module Applications Tx LD ROSA ROSA - GN3050/5 GN3150/5 GN3250/5 GN3268 GN3357 GN3358 TIA - 6 GN1153 GN1160 GN1163 GN1157 GN1157B GN1161 GN1412A GN1444/44S Rx GN2104 / GN2104S CDR CDR CDR GN1085: Quad TIA LD - TOSA LA GN1160 GN1161 CFP4 / QSFP28: 100GbE LR4 CDR - GN2044/44S GN2040 LD LA LD - GN1052 GN1068 10G XFP Module for < 80Km Applications CDR LD ROSA - GN3050 GN3150 GN3250 GN3268 TIA - CDR TOSA GN1185: Quad DFB Driver GN2042/44 Lowest power, LA Free SFP+ Architecture CDR GN1052 GN1068 Semtech Optical & IC Selector Guide * 2016 Laser Drivers and Limiting Amplifiers High performance laser drivers and limiting amplifiers for optical communication. APPLICATIONS: GN1190 * * * * * * * * * * Quad VCSEL driver for parallel and multi-channel datacom & telecom modules. Low power consumption, 210mW typical for 4 channels. Use with GN1090 quad TIA. 10G EPON, XG-PON1 and XG-PON2 8G Fibre Channel 9.95Gbps OC-192 and 10.70Gbps OC-192 with FEC 10.3Gbps Ethernet 10.52Gbps Fibre Channel 11.1Gbps Ethernet over SONET 11.3Gbps Fibre Channel with Forward Error Correction 40G QSFP+ modules 6Gbps and 10 Gbps CPRI modules for wireless front haul 100 Gbps Ethernet LIMITING AMPLIFIERS: NT20045 Low cost 3.0V to 5.5V, 200 Mb/s limiting amplifier for SONET, SDH, ESCON and Fast Ethernet applications over optical fiber. LASER DRIVERS: NT24L73 1.25Gbps CMOS limiting amplifier with CML data outputs and signal status in an MSOP package. GN1185 High performance Quad 25 - 28Gbps DML driver for active TOSAs targeting 100GE applications. GN1250L A limiting amplifier that provides wideband, low noise postamplification, aimed primarily at OC-192 and SDH STM-64 systems. NT20042 Low cost 3.3V / 5.0 V 300 Mb/s LED driver for SONET, ESCON and Fast Ethernet applications over optical fiber. NT22L33 3.3V/ 5.0V CMOS laser driver for data rates of 125Mb/s to 1.25Gbps. GN1160, GN1161, GN1163 Very low power laser drivers for DFB/VCSEL applications. RSSI feature for compatibility with our high gain ROSA's, enabling SFP+ modules without limiting amplifiers. LASER DRIVERS Part Number Overview Data Rate Max Mod / Bias (Gbps) Current (mA) Supply (V) Pkg Applications NT20042 300Mb/s LED Driver 0.3 100 3.3/5.0 QSOP 16 OC-3, Fast Ethernet NT22L33 1.25Gbps FP/DFB Laser Driver 1.25 70/80 3.3/5.0 4mm, 24QFN OC-3, OC-12, GbE GN1160 DFB driver to 11.3 90/ 120 3.3 (Opt. 2.8) 28 QFN 10GE SFP+ 10GBASE-LR GN1163 DFB driver to 11.9 90/120 3.3 (Opt. 2.8) 24 QFN QSFP+ 10GBASE-LR GN1161 VCSEL driver to 11.3 20/15 3.3 (Opt. 2.8) 28 QFN 10GE SFP+ 10GBASE-SR GN1190 Quad VCSEL Driver to 14.3 12/12 3.3 Bare Die 40Gbps Ethernet, Infiniband, QSFP+ GN1185 Quad DFB driver 25-28 55m/70 2.3/3.3 Bare Die 100GE Ethernet active TOSA LIMITING AMPLIFIERS Part Number Overview Data Rate (Gbps) Gain (dB) BW Supply (V) Noise Figure (uV) Applications NT20045 200Mb/s Limiting Amp 0.2 60 0.125 3.3/5.0 80 OC-3, Fast Ethernet NT24L73 1.25Gbps Limiting Amp 1.25 46 0.938 3.3 300 OC-3, OC-12, GbE www.semtech.com 7 TIAs Wideband, low noise transimpedance amplifiers (TIAs) for your optical communication applications. Semtech offers a portfolio of fully integrated Silicon Germanium (SiGe) BiCMOS and pure CMOS transimpedance amplifiers providing wideband, low noise pre-amplification of a current signal from a PIN photodiode or APD. Semtech's TIAs offer best-in-class performance in limiting, linear or automatic gain control versions for use in high performance optical receivers operating from 155Mb/s to 28Gbps. FEATURES NT20R67 Low cost 3.3V to 5.0V CMOS PIN TIA with automatic gain control and more than 43dB dynamic range for Optical Fiber applications up to 200Mb/s. NT23L50 622Mb/s high sensitivity TIA for FTTH and Telecom Fiber transceiver applications. * Wideband, low noise TIAs NT24L50 * Limiting, linear and AGC versions 1.25Gbps high sensitivity TIA with automatic gain control for FTTH and datacom fiber transceiver applications. * Fully integrated on-chip de-coupling for low cost and best performance APPLICATIONS * ITU/IEEE-based transmission systems * 10G and 100G Ethernet * SONET/SDH based transmission systems, test equipment and optical modules from OC-3 to OC-192 * 8G and 16G Fibre Channel * Serial data systems up to 28Gbps * PON/FTTH systems - BPON, EPON, GPON, 10GEPON and XG-PON * 6G and 1-12G CPRI modules for wireless front haul * 100Gbps Client side modules NT24L55 Super high sensitivity, high performance CMOS 1.25 Gbps TIA with 35dB of dynamic operating range designed for FTTH applications such as GePON transceivers and long haul telecom/datacom applications. NT25L51 2.5Gbps CMOS TIA for FTTH and Telecom Fiber transceiver applications with automatic gain control enabling over 27dB of dynamic operating range. NT25L59 2.5Gbps high sensitivity CMOS TIA for GPON with automatic gain control enabling over 30dB of dynamic operating range. GN1090 TOSA CDR CDR LD LA Quad 14.5Gbps array receiver for parallel & multi-channel datacom & telecom modules. Advanced receiver design for excellent optical performance and very low power consumption (240mW total for 4 channels). Use with GN1190 Quad VCSEL driver. TIA ROSA 8 Semtech Optical & IC Selector Guide * 2016 GN1056 GN1068 10Gbps linear TIA for high performance APD applications such as ultra-long haul telecom and submarine applications. 14Gbps multi-rate limiting TIA providing high gain and wideband performance for use in Ethernet and emerging 16G Fibre Channel applications. GN1058 GN7050, GN7051, GN7052, GN7053 10Gbps high gain TIA optimized for applications requiring AGC, such as 10GBASE-LRM and DWDM receivers for low OSNR environments. Limiting TIA's designed specifically for 1G EPON, 1G GPON, 2.5G XG-PON and 10G EPON OLT applications. GN7068 GN1081, GN1084, GN1085 10Gbps limiting TIA designed for APD applications such as ROSAs for 10G PON OLT's and 10GBASE-ZR transceivers modules. 1x28Gbps and 4x28Gbps limiting TIA optimized for 100GBASE-LR4 applications. TIAs Part Number Overview Data Rate (Gbps) Gain (k) BW (GHz) Supply (V) Noise Applications NT20R67 155Mb/s AGC TIA 0.155 63 0.165 3.3/5.0 11 nA OC-3, Fast Ethernet NT20067 155Mb/s AGC TIA 0.155 23 0.165 3.3/5.0 11 nA OC-3, Fast Ethernet NT23L50 622Mb/s AGC TIA 0.622 50 0.32 3.3 60 nA OC-12, BPON NT24L50 1.25Gbps AGC TIA 1.25 25 0.75 3.3 92 nA GbE, EPON NT24L55 1.25Gbps High Sensitivity AGC TIA 1.25 46 0.75 3.3 74 nA EPON NT25L51 2.5Gbps AGC TIA 2.5 8 1.7 3.3 230 nA OC-48, GPON (APD) GN25L53 3.1Gbps AGC TIA 3.1 5.5 1.9 3.3 335 nA CPRI, GPON, OC-48 (APD) NT25L59 2.5Gbps High Sensitivity AGC TIA 2.5 29 1.5 3.3 108 nA GPON (PD) NT28L52 10G Limiting to 10.3 2.35 7 3.3 1.2 A PON, 10GBASE-SR GN1056 10G Linear to 11.3 500/1 12 3.3 1A OC-192 GN1058 10G Linear AGC to 11.3 4 12 3.3 1A 10GBASE-LRM & DWDM GN7068 10G Limiting to 11.3 3 12 3.3 1A APD ROSAs for 10G PON ONU & 10GBASE-ZR GN1068 14G Limiting to 14.3 6.75 12 3.3 1.2A CPRI, 10GBASE-SR/LR/ER & 16G FC GN1090 Quad 10G Limiting to 14.3 * * 3.3 0.9A 40Gbps Ethernet; Infiniband; QSFP+ GN7050 1.25G Burst mode Limiting 1.25 13 1.0 3.3 * 1G EPON OLT GN7052 Tri-rate PON TIA 1.25/ 2.5 / 10.3 13/ 1.2/ 2.3 1.1/ 2.5/ 8.7 3.3 * 1.25G EPON/ 2.5G XG-PON / 10G EPON OLT GN7053 1G GPON Burst mode Limiting 1.25 1.25 1.5 3.3 * 1G GPON OLT GN1081 28G Limiting 100 6 22 3.3 1.78A SFP28, 100GBASE-LR4 QSFP28 GN1084 25G Limiting 100 6 22 3.3 2.3A SFP28 and QSFP28 GN1085 Quad 28G Limiting 100 6 22 3.3 1.78A 100GBASE-LR4 * Please contact your sales representative for a detailed datasheet. www.semtech.com 9 Transceiver ICs (LD & LA) High performance laser drivers and limiting amplifiers for optical communication. GN25L98 GN1411A/12B/44/44S 2.5Gbps CMOS burst mode laser driver and limiting post amplifier with automatic ERC control and integrated APD controller. The GN1411A/GN1412A are highly-integrated, low-power, small footprint transceivers that are ideal for SFP+ LR/ER optical modules. NT28L90 GN1157/57B/58 Combined 10Gbps limiting post amplifier and 2.5Gbps burst mode laser driver for cost critical 10GEPON and XG-PON asymmetric applications. The NT28L90 features Tx & Rx sleep control, TX_SD output and Tx Power burst monitoring. Semtech's latest, lowest power transceiver IC's for SFP+ LR/ SR applications with integrated APC and advanced eye shaping features. GN7355/GN7354 2.5Gbps CMOS programmable burst mode laser driver and post amplifier optimized for wide laser compatibility and SuperTIA sensitivity MAC EQ Burst Mode CDR GN7354 & GN7355 10G EPON transceiver for next generation PON systems. The GN7355 combines a 10G burst mode laser driver with a receive CDR and is targeted at 10G EPON symmetric applications. The GN7354 is a pin-for-pin compatible, de-rated version of the GN7355 intended to address the 1.25Gbps and 2.5Gbps transmit data rate, and cost pressures of the 10Gbps asymmetric EPON and XG-PON applications. BOSA LD WDM GN25L96 LA TIA GN7067 SFP+ SFP+ SRSR SFP+ SFP+ LRLR GN1158 GN1157 GN1157B TOSA LA TOSA LD LD LA TIA TIA ROSA ROSA TRANSCEIVER IC (LD&LA) 10 Part Number Overview Data Rate (Gbps) Max Mod / Bias Current (mA) Supply (V) Pkg. Applications GN25L95 Burst Mode DFB + Receive LA to 2.5G 90mA /100mA 3.3 28 QFN EPON, GPON, BOSA-on-Board NT25L90/91 2.5Gbps Burst Mode LDD & LA 2.5 90mA /100mA 3.3 28 QFN EPON, GPON, BOSA-on-Board NT28L90 2.5Gbps Burst Mode DFB + 10 Gbps Receive LA Rx 10.3 Tx 2.5 90mA /100mA 3.3 28 QFN 10GEPON, XG-PON1 (Asymmetric) GN7354 Burst Mode DFB + Receive LA & CDR Rx: 10.3 Tx: to 2.5 90mA /90mA 3.3 (3.3 or 5 output stage) 32 QFN 10GEPON, XG-PON (Asymmetric) GN7355 Burst Mode DFB + Receive LA & CDR 10.3 90mA /90mA 3.3 + 5 output stage (optional 3.3 V) 32 QFN 10GEPON, XG-PON (Symmetric) GN1412B EML Laser Driver + Receive LA to 11.3G 2.5Vpp / 120mA 3.3 32 QFN 10GbE, OC-192 GN1444S EML Laser Driver + Receive LA to 11.3G 2.5Vpp /120mA 1.8 & 3.3 32 QFN 10GbE, OC-192 GN1157 DML Laser Driver + Receive LA to 11.3G 90mA /120mA 3.3 (Optional 2.8) 28 QFN 10GbE LR SFP+, CPRI GN1157B DML Laser Driver + Receive LA to 12.5G 90mA/120mA 2.4 & 3.3 28 QFN 10GbE LR SFP+, CPRI GN1158 VCSEL Laser Driver + Receive LA to 11.3G 20mA /15mA 3.3 (Optional 2.8) 28 QFN 10GbE SR SFP+ Semtech Optical & IC Selector Guide * 2016 Optical Module CDRs Semtech's dual-lane signal conditioners, with integrated VCSEL, DML or EML driver, offer the lowest power, smallest footprint solution for XFP, retimed SFP+ and 100G modules. ENABLING NEXT-GENERATION 100G ETHERNET FEATURE SET FOR DWDM AND TUNABLE APPLICATIONS The GN2104, GN2104S and GN2106A enable next-generation of 100G CFP4 and QSFP28 module form factors. targeting 500m to 10km reach applications. The GN2108 and GN2109 enable the next generation 100G QSFP28 modules targeting 10m to 300m reach applications over multi-mode fiber. Semtech's latest 100G CDR portfolio includes devices that integrate Quad 25G - 28G CDRs with laser drivers for Transmit applications, and TIA interfaces for Receive applications. The innovative offerings build upon Semtech's proven CDR technology and enable solutions for Short Reach and Extended Reach applications. The high level of integration coupled with industry's lowest power and superior performance simplifies the overall module designs and saves cost. The GN2040 family has a rich feature set to enable optimal performance in DWDM and Tunable applications. The features include slice level adjust, programmable peaking on the receive path input and sampling clock phase adjust. ENABLING SFP+ SONET LOW COST, SMALL FOOTPRINT SOLUTION By integrating the limiting amplifier, laser driver and receive and transmit CDR, the GN2042, GN2044 and GN2017A provide an optimal path for lower cost designs. The integrated APC loop and small number of external components also save cost. The high level of integration in a small, 5mmx5mm 32-QFN package enables use in very high density designs. For designs requiring even smaller packages, such as Tunable SFP+ applications, the GN2044S offers an even smaller 4mmx4mm 32-QFN package with all the same benefits. The GN2042 and GN2044 enable a SONET compliant module in an SFP+ form factor. The integration of the laser driver enables the lowest power solution for SFP+. The high level of integration also delivers a small footprint solution to fit within the form factor. The reference clock free architecture simplifies the overall module design and saves cost. TOSA CDR CDR LD LA TIA ROSA OPTICAL MODULE CDRs Part Number Data Rate (Gbps) Lanes Laser Driver Slice Level Adjust Pin Compatibility Pkg Applications GN2042 9.95 - 11.3 2 (1Rx + 1Tx) DML Yes GN2044 32 QFN XFP & SFP+ 10 GbE & OC-192 Enables 1W Retimed SFP+ 10km GN2044 9.95 - 11.3 2 (1Rx + 1Tx) EML Yes GN1444, GN2042 32 QFN XFP & SFP+ 10 GbE, OC-192 & DWDM Enables 1.5W Retimed SFP+ 40/80km GN2044S 9.95 - 11.3 2 (1Rx + 1Tx) EML Yes GN1444S 32 QFN Tunable SFP+, OC-192 & DWDM Enables 1.5W Retimed TSFP+ GN2040 9.95 - 11.3 2 (1Rx + 1Tx) DML Yes GN204x 32 QFN XFP and SFP+ 10 GbE, OC-192 and DWDM GN2017A 9.95 - 11.7 14.025 2 (1Rx + 1Tx) VCSEL No GN2010X 32 QFN 16G FC, 10G FCoE GN2425A 25 - 28 2 (2Tx) - Yes - 32 QFN 100Gbps Ethernet / OTN, Infiniband EDR GN2426A 25 - 28 2 (2Rx) - Yes - 32 QFN 100Gbps Ethernet / OTN, Infiniband EDR GN2104 GN2104S 25 - 28 4 - Yes - 54 QFN 100Gbps Ethernet / OTN, Infiniband EDR GN2106 GN2016A 25 - 28 4 EML Yes - 58 QFN 100Gbps Ethernet / OTN, Infiniband EDR www.semtech.com 11 ROSAs Best-in-class receive optical sub-assemblies (ROSAs) based on patented Rchip technology. Semtech's complete line of PIN and APD ROSA products spans 850 nanometer (nm) to 1550nm including limiting, linear and automatic gain control (AGC) functionality. Our PIN ROSAs operate at +3.3V10% and from -40C to +85C, with highly accurate RSSI functionality and industry best dynamic range. The ROSA products feature patented Rchip packaged in a fully compliant SC or LC type optical subassembly and are available with optional flex circuits. Super High Gain Rchip ROSAs deliver 35k of gain that eliminates the cost and power of the limiting amplifier for SFP+ applications. FEATURES: * Best-in-class stressed receiver sensitivity * High gain to ensure exceptional crosstalk performance within the module * Patented Rchip technology to ensure maximum module manufacturing yield * Super High Gain delivers most integrated, lowest power SFP+ solution APPLICATIONS: GN3050 10 km limiting ROSA provides excellent performance achieving -21dBm unstressed sensitivity. Ideal for 10GBASELR and SR-1 GN3250 10/40 km XMD compatible limiting ROSA provides excellent -21dBm unstressed sensitivity and high ORL for 10GBASEER and IR-2 applications GN3052 AGC ROSA for 10GbE LRM and linear applications Interoperability with all leading EDC solutions for LRM GN3352 11.3Gbps APD ROSA with AGC TIA is ideal for both 80km limiting and DWDM applications requiring excellent OSNR performance GN3357 11.3Gbps APD ROSA with high gain AGC TIA for DWDM and 80km applications GN3257 * 10GBASE-SR * 10G EPON * 10GBASE-LR * 80km * 10GBASE-ER * DWDM * 10GBASE-LRM * 8GFC & 10GFC GN3268 * OC-192 SR-1 * 25G Ethernet 10/40 km XMD compatible low power (94 mW) limiting ROSA * OC-192 IR-2 10/40 km linear AGC ROSA offering excellent performance in low-OSNR environments, coupled with low power consumption TOSA CDR CDR LD LA TIA ROSA GN3352 ROSA 12 GN3250 ROSA Semtech Optical & IC Selector Guide * 2016 ROSAs & SUPER HIGH GAIN ROSAs Part Number Overview Data Rate (Gbps) Gain (k) Supply RSSI Unstressed Sensitivity Comments ORL GN3150 SR Rchip Limiting to 11.3 10 +3.3V 10% Yes -15dBm OMA -14dB GN3050 10km Rchip Limiting to 11.3 10 +3.3V 10% Yes -21dBm GN3250 40km Rchip Limiting to 11.3 10 +3.3V 10% Yes -21dBm GN3052 LRM Rchip AGC to 11.3 9 +3.3V 10% Yes GN3155 to 11.3 35 +3.3V 10% Yes Eliminates LA in SFP+ -14dB to 11.3 35 +3.3V 10% Yes -21dBm Eliminates LA in SFP+ -14dB to 11.3 35 +3.3V 10% Yes -21dBm EliminatesLA in SFP+ -27dB to 11.3 7 +3.3V 10% Yes -21dBm to 11.3 7 +3.3V 10% Yes -21dBm 94 mW power dissipation 94mW power dissipation -14dB GN3268 SR Super High Gain Rchip 10km Super High Gain Rchip 40km Super High Gain Rchip 10km Low Power Limiting 40km Low Power Limiting -17dBm OMA -15dBm OMA -13.5dBm OMA (Stressed sens.) -16.8dBm OMA (Stressed sens.) -16.0dBm OMA (Stressed sens.) -12dBm OMA (Stressed sens.) GN3257 PIN with AGC to 11.3 8.5 +3.3V 10% Yes -19dBm - -27dB GN3352 APD with AGC to 11.3 4 +3.3V 10% VAPD -27dBm - -27dB GN3357 High Gain APD with AGC to 11.3 8.5 +3.3V 10% VAPD -27dBm - -27dB GN3358 High Gain APD Rchip to 11.3 13 +3.3V 10% VAPD -28dBm Ideal for Non-Retimed SFP+ -27dB GN3368 Limiting APD RChip to 11.3 4 +3.3V 10% VAPD -27dBm - -27dB GN3270 25G Limiting PIN ROSA 28 6 +3.3V 10% -14dBm SFP28 LR applications -27dB GN3055 GN3255 GN3068 www.semtech.com Yes -14dB -27dB -14dB -27dB 13 Copper Applications Semtech offers a comprehensive selection of IC solutions for high speed serial line card and backplane communication applications. BACKPLANE OR MID-PLANE High-Speed Backplanes LINECARD SFP+ CDR QSFP+ CDR CDR CXP ASIC CONNECTOR CDR CDR QSFP28 LINECARD CDR nx10Gb/s CDR Retimers: GN2405A/6 GN2402 GN2412 Family GN2408 Family GN2404 Family GN2504 ASIC CONNECTOR CDR nx10Gb/s nx28Gb/s Retimed Crosspoints PASSIVE BACKPLANE LINECARD SFP+ QSFP+ CXP Crosspoint ASIC Crosspoint Crosspoint Crosspoints: GX4002 GN2412 Family GN2408 Family GN2404 Family SWITCH CARD 2 SWITCH CARD 1 Crosspoint Switch ASIC Crosspoint 14 Semtech Optical & IC Selector Guide * 2016 Backplane & Linecard Signal Conditioners Semtech's multi-channel signal conditioners enhance the reach and robustness of high-speed serial links by compensating for transmission losses and re-setting the crosstalk and jitter budgets. HIGH LEVEL OF INTEGRATION AND SMALL FOOTPRINT RESET THE JITTER AND CROSSTALK BUDGETS Semtech's backplane & linecard signal conditioners are ideal for small form factor modules or dense backplane /linecard applications. Using CDRs will reset the jitter budget, substantially increasing the robustness of the system and allowing for design flexibility. Using CDRs in multi-channel systems will also reset the crosstalk budget, an increasing concern at higher data rates. FULL PORTFOLIO Semtech products offer solutions for Ethernet, Infiniband(R), Fibre Channel(R) and PCI Express(R). Solutions are available with and without CDR functionality. Lim Amp or EQ DRIVE LONG BACKPLANES OR CABLES A combination of Equalizer, DFE and CDR technology allows for an optimal solution to drive long, dense backplanes or cables at high speeds. DFE/CDR DeEmphasis LOW POWER Semtech's CDR products require the lowest power in the industry, a key factor as densities increase. MULTI-LANE SIGNAL CONDITIONERS Part Number Data Rate Lanes CDR Ref (Gbps) Clock Input Stage DeSupply Pkg emphasis (V) Applications GN2504 25.6 - 28.1 4 Not Adaptive Yes Req. Equalizer Yes 1.8 54 QFN 25G/50G/100G Linecards, nx28G Backplanes, 25G/50G/100G Active Copper Cables GN2415 1.2 - 15.0 8 Adaptive Yes Req. Equalizer DFE Yes 0.9 1.8 144 BGA 16G Fiber Channel, >nx12.5G Backplanes GT1706 family 1.25 - 14.5 6 Adaptive Yes Req. Equalizer Yes 0.9 1.8 144 BGA GN2412 family 1.25 - 12.8 12 Adaptive Yes Req. Equalizer DFE Yes 0.9 1.8 HD/3G/4K/8K Video Broadcast testing Fibre Channel/Infiniband/ Ethernet Link Testing BERT Developments > nx10G Backplanes, 10G/40G/100G Linecards, 10G144 KR, 40G-KR4, 40G-CR4, BGA Crosspoint Switching, CPRI GN2408 family 1.25 - 12.8 8 Adaptive Yes Req. Equalizer DFE Yes 0.9 1.8 144 BGA >nx10G Backplanes, 10G/40G Linecards, 10G-KR, Crosspoint Switching, CPRI GN2404 family 1.25 - 12.8 4 Adaptive Yes Req. Equalizer DFE Yes 0.9 1.8 144 BGA >nx10G Backplanes, 10G/40G Linecards, 10G-KR, 40G-KR4, 40G-CR4, Crosspoint Switching, CPRI GN2402 10.3125 4 Not Equalizer Yes Req. Yes 3.3 44 QFN nx10G Backplanes, 10G/40G Linecards, 10G/40G Active cables GX4002 9.95 - 11.3, 14.025 2 Not Equalizer Yes Req. Yes 3.3 32 QFN nx10G Backplanes, 10G/40G Linecards, Infiniband FDR, 16G Fibre Channel, Crosspoint Switching GN2405A/6S 9.95 -11.3 4 Not Equalizer Yes Req. Yes 3.3 48 QFN nx10G Backplanes 10G/40G Linecards 10G/40G Active cables GN2406/6S 9.95 -10.95 4 Not Yes Req. Limiting Amp Yes 3.3 48 QFN 10G/40G Linecards GN1407 1-8 4 No Not Req. Equalizer No 1.2 1.8 56 QFN PCIe Gen 1/2/3, SNAP-12, POP-4/LX-4/CX-4/KX-4, XAUI/RXAUI and Rapid I/O GN1406 2.5 3.125 5.0, 6.25 4 Yes Req. Equalizer Yes 1.2 1.8 56 QFN PCIe Gen 1/2, SNAP-12, POP-4/LX-4/CX-4/KX-4, XAUI/RXAUI and Rapid I/O www.semtech.com 15 Optical Module Reference Design Kit Improve the performance and time to market of your SFP+ design with Semtech Optical Module Reference Design Kits. FAST TIME TO MARKET BROAD RANGE OF REFERENCE DESIGNS AVAILABLE Semtech's reference design kits include schematics, layout files and a design guide as well as attentive support from experienced applications engineers. This reduces both design costs and decreases time to market. This is further realized in the FTTx market where it is possible to re-use the 10G symmetric SFP+ design to address the 10G asymmetric market. Reference design kits are offered to cover a wide variety of SFP+ applications, including symmetrical and asymmetrical PON, and 10 GbE SR and LR applications. GN1157B RDK (RDK-GN1157B-SFP+00) For ethernet SFP+, designs are available for both the traditional architecture (including a limiting amplifier in the receive chain), as well as a new LA-free architecture enabled by Semtech's High Gain ROSA portfolio. GN7354/7355 RDK, RDK-SFP+-PON-S00, RDK-SFP+-PON-A00 Rx CDR+ Tx Burst Mode DML driver GN7355 - Symmetric PON GN7354 - Asymmetric PON GN1160/GN3055 RDK (RDK-SFP+-Optical04) RDK-SFP++LR OPTICAL REFERENCE DESIGN KITS Part Number Parts Demonstrated Data Rate (Gbps) Connector Type Wavelength (nm) Applications RDK-SFP++LR GN3068/GN3268, GN2010D/ GN2042 9.95 - 11.3 SFP+ 1310 10GbE LR, OC-192 RDK-SFP++ER GN3268, GN2010EA/GN2044 9.95 - 11.3 SFP+ 1550 10Gb ER, OC-192 RDK-SFP+-PON-S00 GN7355 10.3 SFP+ 1577/ 1270 10G EPON RDK-SFP+-PON-A00 GN7354 10/1.25 10/2.5 SFP+ 1577/1310 1577/ 1270 10G EPON Asym. XG-PON1 RDK-SFP+-Optical02 GN1157 1 - 11.3 SFP+ 1310 10GbE LR & CPRI RDK-GN1157B-SFP+00 GN1157B 1-12.5 SFP+ 1310 10GbE LR & CPRI RDK-SFP+-Optical03 GN1158 1 - 11.3 SFP+ 850 10GbE SR RDK-SFP+-Optical04 GN1160 & GN3055 1 - 11.3 SFP+ 1310 10GbE LR RDK-SFP+-Optical05 GN1161 & GN3155 1 - 11.3 SFP+ 850 10GbE SR Design files and results available upon request. Semtech Corporation Headquarters 200 Flynn Road, Camarillo, California 93012 phone: (805) 498-2111 * fax: (805) 498-3804 * email: canada@semtech.com * www.semtech.com Semtech and the Semtech logo are registered marks of Semtech Corporation. All other trademarks and trade names mentioned may be marks and names of their respective companies. Semtech reserves the right to make changes to, or discontinue any products described in this document without further notice. Semtech makes no warranty, representation or guarantee, express or implied, regarding the suitability of its products for any particular purpose. (c)2016 Semtech Corporation. All rights reserved. Optical-SG16