Field Programmable Oscillator Description Features SiTime offers a wide range of field programmable (FP) MEMS oscillators including simple oscillators, differential oscillators, high temperature oscillators, VCXO and spread spectrum oscillators. These FP devices support the same specifications and performance as their factoryprogrammed counterparts. They enable engineers to experiment with different configurations and generate customized samples in seconds for fast prototyping. Figure 1 illustrates the simple programming setup required for programming SiTime FP devices by using the SiT6100DK, a field programming kit. Refer to SiT6100DK quick start guide and other documents for more information. For production volume, SiTime offers factory programming of its entire portfolio with the shortest lead time available in the industry. Applications Generic samples in seconds for prototype builds Experiment with different options for optimal timing margin Configure different drive strengths for best EMI and/or to drive larger loads Fast prototype builds Support for 8 MEMS oscillator families Low power (SiT1602, SiT8008, SiT8009) Ultra-performance (SiT8208, SiT8209) Ultra-performance differential (SiT9120, SiT9121, SiT9122) High temp (SiT1618, SiT8918, SiT8919, SiT8920, SiT8921) AEC-Q100 Automotive (SiT2024, SiT2025, SiT8924, SiT8925) Clock Generators (SiT2001, SiT2002, SiT2018, SiT2019, SiT2020, SiT2021) VCXO (SiT3807, SiT3808, SiT3809) Differential VCXO (SiT3821, SiT3822) Spread spectrum (SiT9005, SiT9003) Differential spread spectrum (SiT9002) Wide variety of programmable options Frequency from 1 - 625 MHz Frequency stability from 20 to 50 ppm Supply voltages of 1.8V or 2.5 to 3.3V Operating temperature up to 125 C and down to -55C Package sizes for 2.0 x 1.6 to 7.0 x 5.0 mm x mm Pull ranges from 25 to 1600 ppm (VCXO only) Spread percentage from 0.25% to 2% or -0.5% to -4% (Spread spectrum only) Rise/fall time from 0.25 ns to 40 ns Pb-free, RoHS and REACH compliant Figure 1. Field Programmable Software and Hardware Rev 1.5 February 1, 2018 www.sitime.com Field Programmable Oscillator Field Programmable Device Ordering Information In addition, the SiT8008BI-11--XXX-000.FP0000 can be used for either SiT1602 or SiT8008 in the 2.0 x 1.6 mm x mm package. The SiT1602 and the SiT8008 share similar electrical specs and the same field programmable devices, but they support different frequencies. A FP device works as a superset of its programmed counterpart. In certain cases, it can also be mapped to different programmed base products. As an example, SiT8008BI-71-XXX-000.FP0000 is a field programmable device in the low power family. It comes in the 2.0 x 1.6 mm package, and can be programmed to support different combinations of the following: Please see Supported Device column to figure out which product families can be programmed using the given FP part. Contact SiTime for devices of your interest that are not covered here. Frequency: 1 MHz to 110 MHz with 6 decimal places of accuracy Frequency stability: 20 ppm, 25 ppm, 50 ppm Temperature range: -20C to 70C, -40C to 85C Supply voltages: 1.8V or 2.5V to 3.3V Output drive strength: 8 different options for different rise/fall time Table 1. Field Programmable Devices - MEMS XO[1] Oscillator Product Family Field Programmable (FP) Part Number Supported Devices Signaling Type Frequency Range (MHz) Frequency Stability (ppm) Temp Range (C) Voltage (V) 2.0 x 1.6 SiT8008BI-71-XXX-000.FP0000 2.5 x 2.0 SiT8008BI-11-XXX-000.FP0000 SiT8008BI-21-XXX-000.FP0000 Low Power Single-Ended Oscillator SiT1602, SiT8008 LVCMOS 1 to 110 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 5.0 x 3.2 SiT8008BI-81-XXX-000.FP0000 7.0 x 5.0 SiT8009BI-71-XXX-000.FP0000 2.0 x 1.6 SiT8009BI-11-XXX-000.FP0000 2.5 x 2.0 SiT8009 LVCMOS 115 to 137 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V SiT8009BI-81-XXX-000.FP0000 7.0 x 5.0 SiT8208AI-G1-XXX-000.FP0000 3.2 x 2.5 SiT8208AI-21-XXX-000.FP0000 SiT8208 LVCMOS 1 to 80 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 3.2 x 2.5 SiT8209AI-G1-XXX-000.FP0000 SiT8209 LVCMOS 80 to 220 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 3.2 x 2.5 SiT9121AI-1B1-XXX000.FP0000 LVPECL SiT9121AI-1C1-XXX000.FP0000 SiT9121AI-2B1-XXX000.FP0000 1 to 220 20, 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 3.2 x 2.5 LVDS 1 to 220 20, 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 5.0 x 3.2 7.0 x 5.0 SiT9121AI-2D1-XXX000.FP0000 3.2 x 2.5 SiT9122AI-1B1-XXX000.FP0000 LVPECL SiT9122AI-1C1-XXX000.FP0000 220 to 625 20, 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 5.0 x 3.2 7.0 x 5.0 SiT9122 3.2 x 2.5 SiT9122AI-2B1-XXX000.FP0000 SiT9122AI-2C1-XXX000.FP0000 5.0 x 3.2 7.0 x 5.0 SiT9120, SiT9121 SiT9121AI-2C1-XXX000.FP0000 SiT9122AI-1D1-XXX000.FP0000 5.0 x 3.2 7.0 x 5.0 SiT8209AI-31-XXX-000.FP0000 SiT9121AI-1D1-XXX000.FP0000 5.0 x 3.2 7.0 x 5.0 SiT8208AI-31-XXX-000.FP0000 SiT8209AI-21-XXX-000.FP0000 LVDS 220 to 625 20, 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 5.0 x 3.2 7.0 x 5.0 SiT9122AI-2D1-XXX000.FP0000 Rev 1.5 3.2 x 2.5 5.0 x 3.2 SiT8009BI-31-XXX-000.FP0000 High Performance Differential Oscillator 3.2 x 2.5 SiT8008BI-31-XXX-000.FP0000 SiT8009BI-21-XXX-000.FP0000 UltraPerformance Single-Ended Oscillator Package Size (mm x mm) Page 2 of 11 www.sitime.com Field Programmable Oscillator Table 1. Field Programmable Devices - MEMS XO[1] (continued) Oscillator Product Family Field Programmable (FP) Part Number Supported Devices Signaling Type Frequency Range (MHz) SiT8920BM-21-XXX-000.FP0000 SiT1618, SiT8918, SiT8920 LVCMOS SiT8920BM-31-XXX-000.FP0000 High Temperature Single-Ended Oscillator SiT8920BM-81-XXX-000.FP0000 SiT8921BM-71-XXX-000.FP0000 Voltage (V) SiT8919, SiT8921 LVCMOS SiT8921BM-31-XXX-000.FP0000 SiT8921BM-81-XXX-000.FP0000 Package Size (mm x mm) 2.0 x 1.6 Refer "Supported Frequencies" tables in SiT1618, SiT8918 and SiT8920 datasheets 2.5 x 2.0 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V Refer "Supported Frequencies" tables in SiT8919 and SiT8921 datasheets 3.2 x 2.5 5.0 x 3.2 7.0 x 5.0 2.0 x 1.6 115.194001 to 137 SiT8921BM-11-XXX-000.FP0000 SiT8921BM-21-XXX-000.FP0000 Temp Range (C) 1 to 110 SiT8920BM-71-XXX-000.FP0000 SiT8920BM-11-XXX-000.FP0000 Frequency Stability (ppm) 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 2.5 x 2.0 1.8V, 2.5-3.3V 3.2 x 2.5 5.0 x 3.2 7.0 x 5.0 1 to 110 SiT2024BM-S1-XXX-000.FP0000 SiT2024 LVCMOS Refer "Supported Frequencies" table in SiT2024 datasheet 20, 25, 30, 50 -40 to 85, -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 2.9 x 2.8 (SOT23-5) 20, 25, 30, 50 -40 to 85, -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 2.9 x 2.8 (SOT23-5) 115.2 to 137 SiT2025BM-S1-XXX-000.FP0000 AEC-Q100 Automotive Oscillator SiT2025 LVCMOS Refer "Supported Frequencies" table in SiT2025 datasheet 2.0 x 1.6 SiT8924BM-71-XXX-000.FP0000 1 to 110 SiT8924BM-11-XXX-000.FP0000 SiT8924BM-21-XXX-000.FP0000 SiT8924 LVCMOS SiT8924BM-31-XXX-000.FP0000 Refer "Supported Frequencies" table in SiT8924 datasheet 20, 25, 30, 50 -40 to 85, -40 to 105, -40 to 125, -55 to 125 2.5 x 2.0 1.8V, 2.5-3.3V 5.0 x 3.2 7.0 x 5.0 SiT8924BM-81-XXX-000.FP0000 2.0 x 1.6 SiT8925BM-71-XXX-000.FP0000 115.2 to 137 SiT8925BM-11-XXX-000.FP0000 SiT8925BM-21-XXX-000.FP0000 3.2 x 2.5 SiT8925 LVCMOS SiT8925BM-31-XXX-000.FP0000 Refer "Supported Frequencies" table in SiT8925 datasheet 20, 25, 30, 50 -40 to 85, -40 to 105, -40 to 125, -55 to 125 2.5 x 2.0 1.8V, 2.5-3.3V 3.2 x 2.5 5.0 x 3.2 7.0 x 5.0 SiT8925BM-81-XXX-000.FP0000 SiT2001BI-S1-XXX-000.FP0000 SiT2001 LVCMOS 1 to 110 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 2.9 x 2.8 (SOT23-5) SiT2002BI-S1-XXX-000.FP0000 SiT2002 LVCMOS 115 to 137 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 2.9 x 2.8 (SOT23-5) 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 2.9 x 2.8 (SOT23-5) 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 2.9 x 2.8 (SOT23-5) 1 to 110 Clock Generator Oscillator SiT2020BM-S1-XXX-000.FP0000 SiT2018, SiT2020 LVCMOS Refer "Supported Frequencies" tables in SiT2018 and SiT2020 datasheets 115.194001 to 137 SiT2021BM-S1-XXX-000.FP0000 SiT2019, SiT2021 LVCMOS Refer "Supported Frequencies" tables in SiT2019 and SiT2021 datasheets Note: 1. Revision number which is placed right after SiTXXXX in the part number is fixed and not programmable. For instance, SiT8008A cannot be programed to SiT8008B. Rev 1.5 Page 3 of 11 www.sitime.com Field Programmable Oscillator Table 2. Field Programmable Devices - MEMS VCXO[2] Oscillator Product Family Field Programmable (FP) Part Number Supported Devices Signaling Type Frequency Frequency Range Stability (MHz) (ppm) Temp Range (C) Voltage (V) Pull Range (ppm) 3.2 x 2.5 SiT3808AI-G2-XXXX-000.FP0000 SiT3808AI-22-XXXX-000.FP0000 High Performance Single-Ended VCXO SiT3807, SiT3808 LVCMOS 1 to 80 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 25 to 1600 5.0 x 3.2 SiT3808AI-32-XXXX-000.FP0000 7.0 x 5.0 SiT3809AI-G2-XXXX-000.FP0000 3.2 x 2.5 SiT3809AI-22-XXXX-000.FP0000 SiT3809 LVCMOS 80 to 220 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 25 to 1600 SiT3821AI-1C2-XXXX000.FP0000 LVPECL SiT3821AI-1D2-XXXX000.FP0000 5.0 x 3.2 7.0 x 5.0 SiT3809AI-32-XXXX-000.FP0000 1 to 220 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V -40 to 85, -20 to 70 2.5V, 3.3V -40 to 85, -20 to 70 2.5V, 3.3V -40 to 85, -20 to 70 2.5V, 3.3V 25 to 1600 SiT3821 SiT3821AI-2C2-XXXX000.FP0000 LVDS High Performance Differential VCXO Package Size (mm x mm) 1 to 220 25, 50 SiT3821AI-2D2-XXXX000.FP0000 SiT3822AI-1C2-XXXX000.FP0000 LVPECL 220 to 625 25, 50 SiT3822AI-1D2-XXXX000.FP0000 25 to 1600 25 to 1600 5.0 x 3.2 7.0 x 5.0 5.0 x 3.2 7.0 x 5.0 5.0 x 3.2 7.0 x 5.0 SiT3822 SiT3822AI-2C2-XXXX000.FP0000 LVDS 220 to 625 SiT3822AI-2D2-XXXX000.FP0000 25, 50 25 to 1600 5.0 x 3.2 7.0 x 5.0 Note: 2. Revision number which is placed right after SiTXXXX in the part number is fixed and not programmable. For instance, SiT8008A cannot be programed to SiT8008B. Rev 1.5 Page 4 of 11 www.sitime.com Field Programmable Oscillator Table 3. Field Programmable Devices - MEMS Spread Spectrum XO[3] Oscillator Product Family Field Programmable (FP) Part Number SiT9005AI-71-XXXX000.FP0000 Spread Spectrum SiT9005AI-11-XXXX000.FP0000 Single-Ended Oscillator SiT9005AI-21-XXXX000.FP0000 Supported Signaling Devices Type Frequency Range (MHz) Frequency Stability (ppm) Temp Range (C) Spread Range (%) Package Size (mm x mm) 1 to 141 SiT9005 Refer to Table 4: SiT9005 FP LVCMOS Oscillator unsupported frequencies 2.0 x 1.6 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 0.125 to 2, -0.25 to -4 5.0 x 3.2 2.5V, 2.8V, 3.3V SiT9003 LVCMOS 1 to 110 2.5 x 2.0 3.2 x 2.5 SiT9003AI-33-33XX-000.FP000 Spread SiT9003AI-83-33XX-000.FP000 Spectrum Single-Ended SiT9003AI-33-18XX-000.FP000 Oscillator Voltage (V) 50, 100 0.25 to 0.5, -0.5 to -1 -40 to 85, -20 to 70 7.0 x 5.0 5.0 x 3.2 1.8V SiT9003AI-83-18XX-000.FP000 7.0 x 5.0 SiT9002AI-X32XXXXX000.FP000 Spread Spectrum Differential Oscillator SiT9002 SiT9002AI-X82XXXXX000.FP000 1 to 220 LVPECL, Refer to Table 5 : LVDS, SiT9002 FP HCSL, Oscillator CML unsupported frequencies -20 to 70: 25, 50 -40 to 85: 50 5.0 x 3.2 -40 to 85, -20 to 70 1.8V, 2.5V, 3.3V 0.25 to 2, -0.5 to -4 7.0 x 5.0 Note: 3. Revision number which is placed right after SiTXXXX in the part number is fixed and not programmable. For instance, SiT8008A cannot be programed to SiT8008B. Table 4. List of SiT9005 FP Oscillator Unsupported Frequencies SiT9005 FP Oscillator Unsupported Frequency Range (MHz) 2.06% center spread Min. Max. -4.01% down spread Min. Max. 120.100000 121.100000 121.000000 121.300000 Rev 1.5 -4.28% center spread Min. Max. 120.100000 122.300000 122.900000 123.100000 123.500000 124.000000 124.9000000 125.200000 Page 5 of 11 www.sitime.com Field Programmable Oscillator Table 5. List of SiT9002 FP Oscillator Unsupported Frequencies SiT9002 FP Oscillator Unsupported Frequency Range (MHz) 0.25% center spread 0.5% center spread 1.0% center spread 2.0% center spread Min. Max. Min. Max. Min. Max. Min. Max. 1.04200 1.07000 1.04000 1.07400 1.03600 1.07800 1.02600 1.09000 1.19200 1.22400 1.19000 1.22600 1.18400 1.23400 1.17200 1.24600 1.39000 1.42800 1.38800 1.43200 1.38000 1.43800 1.36800 1.45400 2.08600 2.14200 2.08200 2.14600 1.65600 1.66600 1.64000 1.68200 4.17000 4.28000 2.84200 2.84600 2.07000 2.15800 1.86800 1.87000 8.35000 8.57000 2.85000 2.86200 2.83000 2.87800 2.05000 2.17800 16.69000 17.13000 4.16000 4.29000 4.14000 4.31000 2.46200 2.49000 33.40000 34.25000 5.70000 5.73000 5.66000 5.75000 2.80200 2.90600 66.81000 68.51000 8.33000 8.59000 8.28000 8.63000 4.10000 4.36000 133.61000 137.11000 11.37000 11.45000 11.31000 11.51000 4.92000 4.98000 160.31000 164.61000 16.65000 17.19000 16.57000 17.27000 5.60000 5.81000 200.41000 205.71000 22.85000 22.90000 22.65000 23.00000 7.47000 7.48000 33.30000 34.35000 33.15000 34.55000 8.20000 8.72000 45.50000 45.55000 45.30000 46.05000 9.85000 9.97000 45.60000 45.65000 66.31000 69.11000 11.21000 11.63000 45.70000 45.80000 90.51000 92.11000 16.41000 17.45000 66.61000 68.71000 132.61000 138.21000 19.69000 19.93000 91.01000 91.11000 159.11000 165.81000 32.80000 34.90000 91.21000 91.31000 181.21000 186.61000 39.40000 39.85000 91.41000 91.61000 198.91000 207.31000 44.85000 46.50000 133.21000 137.51000 65.61000 69.81000 159.91000 165.01000 78.71000 79.71000 182.11000 182.21000 89.71000 93.01000 182.41000 182.71000 131.31000 139.61000 182.81000 183.71000 157.61000 167.51000 184.01000 184.21000 179.41000 188.51000 185.11000 185.21000 197.01000 209.41000 199.91000 206.21000 Rev 1.5 Page 6 of 11 www.sitime.com Field Programmable Oscillator Table 5. List of SiT9002 FP Oscillator Unsupported Frequencies (continued) SiT9002 FP Oscillator Unsupported Frequency Range (MHz) -0.5% down spread -1.0% down spread -2.0% down spread -4.0% down spread Min. Max. Min. Max. Min. Max. Min. Max. 1.04461 1.07268 1.04520 1.07937 1.04636 1.08878 1.04652 1.11180 1.19498 1.22706 1.19595 1.23213 1.19584 1.24634 1.19544 1.27092 1.39348 1.43157 1.39494 1.43916 1.39380 1.45238 1.39536 1.48308 2.09122 2.14736 2.09241 2.15673 1.67256 1.68266 1.67280 1.71564 4.18043 4.29070 2.85621 2.86023 2.09070 2.17958 1.90536 1.90740 8.37088 8.59143 2.86425 2.87631 2.85830 2.90678 2.09100 2.22156 16.73173 17.17283 4.18080 4.31145 4.18140 4.35310 2.51124 2.53980 33.48350 34.33563 5.72850 5.75865 5.71660 5.80750 2.85804 2.96412 66.97703 68.68128 8.37165 8.63295 8.36280 8.71630 4.18200 4.44720 133.94403 137.45278 11.42685 11.50725 11.42310 11.62510 5.01840 5.07960 160.71078 165.02153 16.73325 17.27595 16.73570 17.44270 5.71200 5.92620 200.91103 206.22428 22.96425 23.01450 22.87650 23.23000 7.61940 7.62960 33.46650 34.52175 33.48150 34.89550 8.36400 8.89440 45.72750 45.77775 45.75300 46.51050 10.04700 10.16940 45.82800 45.87825 66.97310 69.80110 11.43420 11.86260 45.92850 46.02900 91.41510 93.03110 16.73820 17.79900 66.94305 69.05355 133.93610 139.59210 20.08380 20.32860 91.46505 91.56555 160.70110 167.46810 33.45600 35.59800 91.66605 91.76655 183.02210 188.47610 40.18800 40.64700 91.86705 92.06805 200.89910 209.38310 45.74700 47.43000 133.87605 138.19755 66.92220 71.20620 160.70955 165.83505 80.28420 81.30420 183.02055 183.12105 91.50420 94.87020 183.32205 183.62355 133.93620 142.40220 183.72405 184.62855 160.76220 170.86020 184.93005 185.13105 182.99820 192.28020 186.03555 186.13605 200.95020 213.59820 200.90955 207.24105 Rev 1.5 Page 7 of 11 www.sitime.com Field Programmable Oscillator Tape & Reel Options FP devices are shipped with standard Tape & Reel options. An additional letter is affixed to the end of the FP device part numbers in Tables 6 to 8 to specify the tape size and the reel quantity. For example, the last letter "G" in the SiT8008AI-71-XXX000.FP0000G indicates 250 pieces of SiT8008AI FP devices shipped in 8 mm tape. The complete list of T&R options for different device package sizes are shown in tables below. Table 6. Ordering Codes for Supported Tape & Reel Packing Method Supported FP Device: SiT8008, SiT8009, SiT8920, SiT8921, SiT8924, SiT8925, SiT9005 Tape & Reel 8 mm Tape 12 mm Tape 16 mm Tape Package Size (mm x mm) 250 pcs reel 1ku reel 250 pcs reel 1ku reel 250 pcs reel 2.0 x 1.6 G E - - - 1ku reel - 2.5 x 2.0 G E - - - - 3.2 x 2.5 G E - - - - 5.0 x 3.2 - - X Y - - 7.0 x 5.0 - - - - X Y Table 7. Ordering Codes for Supported Tape & Reel Packing Method Supported FP Device: SiT3808, SiT3809, SiT3821, SiT3822, SiT8208, SiT8209, SiT9002, SiT9003, SiT9121, SiT9122 Tape & Reel 12 mm Tape 16 mm Tape Package Size (mm x mm) 250 pcs reel 1ku reel 250 pcs reel 1ku reel 2.5 x 2.0 X Y - - 3.2 x 2.5 X Y - - 5.0 x 3.2 X Y - - 7.0 x 5.0 - - X Y Table 8. Ordering Codes for Supported Tape & Reel Packing Method Supported FP Device: SiT2024, SiT2025, SiT9201, SiT2001, SiT2002, SiT2020, SiT2021 Tape & Reel 8mm Tape Package Size (mm x mm) 250 pcs reel 1ku reel 2.9 x 2.8 G E Rev 1.5 Page 8 of 11 www.sitime.com Field Programmable Oscillator Time Machine II Programmer Kit FP devices are programmed with SiTime's oscillator programmer. Time Machine II is a complete programming kit. It comes with the programmer base unit and three socket cards, each of which accommodates two different oscillator package sizes. The ordering codes for the programming kit and the socket cards are shown in the table below. Note that earlier versions of the programming kit was shipped with the SiT6162DK socket card that accommodates 2.7 x 2.4 mm x mm (2.5 x 2.0 compatible) and 3.2 x 2.5 mm x mm 4-pin packages. The SiT6162DK has since been replaced with SiT6165DK, which supports the 2.9 x 2.8 mm x mm (SOT23-5) packages in addition to 3.2 x 2.5 mm x mm packages. Table 9. Programmer Kit Description and Ordering Codes Device Name Part Number Description Programming Kit SiT6100DK The complete kit that includes the programmer base (SiT61650DK) and three socket cards (SiT6160DK, SiT6161 and SiT6165). Programmer Base SiT6150DK The base programmer with no sockets. Programming Socket SiT6160DK 5.0x3.2 and 7.0x5.0 packages programming sockets to program all 6-in and 4-pin field programmable devices. Programming Socket SiT6161DK 2.0x1.6 and 2.5x2.0 packages programming sockets to program all 6-in and 4-pin field programmable devices. Programming Socket SiT6165DK 3.2x2.5 package programming sockets to program all 6-in and 4-pin field programmable devices. 2.9x2.8 (SOT23-5) package supports 5-pin field programmable devices Rev 1.5 Page 9 of 11 www.sitime.com Field Programmable Oscillator Socket Card Selection for Programming Each socket card for the Time Machine II programmer comes with two sockets, each of which accommodates a particular package size. In addition, some sockets are designed to work with 4-pin devices only whereas other sockets can accommodate both 4-pin and 6-pin devices. Table below shows how to select the proper socket card for the desired FP device package size. Note that the package sizes are also printed right next to the sockets on the socket cards for visual identification during device programming. Table 10. Supported Packages Package Size 2.0 x 1.6 (4-pin) Socket to use Supported Field Programmable Devices Rev 1.5 2.5 x 2.0 (4-pin) 2.9 x 2.8 (5-pin) SiT8008 SiT8009 SiT8920 SiT8921 SiT8924 SiT8925 SiT9003 SiT9005 SiT2024 SiT2025 SiT9201 SiT2001 SiT2002 SiT2020 SiT2021 SiT6161DK SiT8008 SiT8009 SiT8920 SiT8921 SiT8924 SiT8925 SiT9005 3.2 x 2.5 (4-pin & 6-pin) 5.0 x 3.2 (4-pin & 6-pin) SiT6165DK Page 10 of 11 7.0 x 5.0 (4-pin & 6-pin) SiT6160DK SiT8008 SiT8009 SiT8208 SiT8209 SiT8920 SiT8921 SiT8924 SiT8925 SiT3808 SiT3809 SiT9121 SiT9122 SiT9003 SiT9005 SiT8008 SiT8009 SiT8208 SiT8209 SiT8920 SiT8921 SiT8924 SiT8925 SiT3808 SiT3809 SiT9121 SiT9122 SiT3821 SiT3822 SiT9002 SiT9003 SiT8008 SiT8009 SiT8208 SiT8209 SiT8920 SiT8921 SiT8924 SiT8925 SiT3808 SiT3809 SiT9121 SiT9122 SiT3821 SiT3822 SiT9002 SiT9003 www.sitime.com Silicon MEMS Outperforms Quartz Table 11. Revision History Revision Release Date 0.8 04/01/2013 1.0 02/27/2014 1.01 03/12/2014 1.1 03/30/2015 1.2 07/21/2015 1.3 09/15/2015 1.4 03/14/2016 1.5 02/01/2018 Change Summary First release Added more field programmer devices Updated Time Machine Socket Card information Formatted enhancement Corrected the ordering code for High Temperature, Single-Ended devices Updated revision from A to B for SiT8008/8009/8920/8921 Corrected frequency stability of SiT9002 Added supports for AEC-Q100 automotive products;SiT2024, SiT2025, SiT8924,SiT8925 Added supports for clock generators products;SiT9201, 2001, 2002, SiT2018, SiT2019, SiT2020, SiT2021 Corrected frequency range and frequency stability of the high temperature products (SiT8920/SiT8921) in Table.1 Updated the part number of the program kits in Table.6 Added 25 ppm frequency stability option to AEC-Q100 family Revised spread percentage of SiT9001 Added 2.8 V voltage option to SiT9003 Corrected and added one more "0" at the end of all part numbers except for SiT900x" Added SiT9005 Added SiT9002 unsupported frequencies list Took out 2520 and 3225 package options from SiT9003 Took out 2520 package option from SiT8208, SiT8209, SiT3807 and SiT3808 Took out SiT9001 Updated logo and company address, other page layout changes SiTime Corporation, 5451 Patrick Henry Drive, Santa Clara, CA 95054, USA | Phone: +1-408-328-4400 | Fax: +1-408-328-4439 (c) SiTime Corporation 2013-2018. The information contained herein is subject to change at any time without notice. SiTime assumes no responsibility or liability for any loss, damage or defect of a Product which is caused in whole or in part by (i) use of any circuitry other than circuitry embodied in a SiTime product, (ii) misuse or abuse including static discharge, neglect or accident, (iii) unauthorized modification or repairs which have been soldered or altered during assembly and are not capable of being tested by SiTime under its normal test conditions, or (iv) improper installation, storage, handling, warehousing or transportation, or (v) being subjected to unusual physical, thermal, or electrical stress. Disclaimer: SiTime makes no warranty of any kind, express or implied, with regard to this material, and specifically disclaims any and all express or implied warranties, either in fact or by operation of law, statutory or otherwise, including the implied warranties of merchantability and fitness for use or a particular purpose, and any implied warranty arising from course of dealing or usage of trade, as well as any common-law duties relating to accuracy or lack of negligence, with respect to this material, any SiTime product and any product documentation. Products sold by SiTime are not suitable or intended to be used in a life support application or component, to operate nuclear facilities, or in other mission critical applications where human life may be involved or at stake. All sales are made conditioned upon compliance with the critical uses policy set forth below. CRITICAL USE EXCLUSION POLICY BUYER AGREES NOT TO USE SITIME'S PRODUCTS FOR ANY APPLICATION OR IN ANY COMPONENTS USED IN LIFE SUPPORT DEVICES OR TO OPERATE NUCLEAR FACILITIES OR FOR USE IN OTHER MISSION-CRITICAL APPLICATIONS OR COMPONENTS WHERE HUMAN LIFE OR PROPERTY MAY BE AT STAKE. SiTime owns all rights, title and interest to the intellectual property related to SiTime's products, including any software, firmware, copyright, patent, or trademark. The sale of SiTime products does not convey or imply any license under patent or other rights. SiTime retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to the sale of products or services by SiTime. Unless otherwise agreed to in writing by SiTime, any reproduction, modification, translation, compilation, or representation of this material shall be strictly prohibited. Rev 1.5 Page 11 of 11 www.sitime.com