PD - 95281A IRF7484PbF HEXFET(R) Power MOSFET Typical Applications l Industrial Motor Drive VDSS RDS(on) max (mW) 40V Benefits l l l l l Advanced Process Technology Ultra Low On-Resistance Fast Switching Repetitive Avalanche Allowed up to Tjmax. Lead-Free Description This Stripe Planar design of HEXFET(R) Power MOSFETs utilizes the latest processing techniques to achieve extremely low on-resistance per silicon area. Additional features of this HEXFET power MOSFET are a 150C junction operating temperature, fast switching speed and improved repetitive avalanche rating. These benefits combine to make this design an extremely efficient and reliable device for use in a wide variety of applications. 10@VGS = 7.0V ID 14A A A D S 1 8 S 2 7 D S 3 6 D G 4 5 D SO-8 Top View Absolute Maximum Ratings Parameter ID @ TA = 25C ID @ TA = 70C IDM PD @TA = 25C VGS EAS IAR EAR TJ, TSTG Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Junction and Storage Temperature Range Max. Units 14 11 110 2.5 0.02 8.0 230 See Fig.16c, 16d, 19, 20 -55 to + 150 A W W/C V mJ A mJ C Thermal Resistance Symbol RJL RJA www.irf.com Parameter Junction-to-Drain Lead Junction-to-Ambient Typ. Max. Units --- --- 20 50 C/W 1 09/22/10 IRF7484PbF Electrical Characteristics @ TJ = 25C (unless otherwise specified) RDS(on) VGS(th) gfs Parameter Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient Static Drain-to-Source On-Resistance Gate Threshold Voltage Forward Transconductance IDSS Drain-to-Source Leakage Current IGSS Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance V(BR)DSS V(BR)DSS/TJ Qg Qgs Qgd td(on) tr td(off) tf Ciss Coss Crss Min. 40 --- --- 1.0 40 --- --- --- --- --- --- --- --- --- --- --- --- --- --- Typ. --- 0.040 --- --- --- --- --- --- --- 69 9.0 16 9.3 5.0 180 58 3520 660 76 Max. Units Conditions --- V VGS = 0V, ID = 250A --- V/C Reference to 25C, ID = 1mA 10 m VGS = 7.0V, ID = 14A 2.0 V VDS = VGS, ID = 250A --- S VDS = 10V, ID = 14A 20 VDS = 40V, VGS = 0V A 250 VDS = 32V, VGS = 0V, TJ = 125C 200 VGS = 8.0V nA -200 VGS = -8.0V 100 ID = 14A --- nC VDS = 32V --- VGS = 7.0V --- VDD = 20V --- ID = 1.0A ns --- RG = 6.2 --- VGS = 7.0V --- VGS = 0V --- pF VDS = 25V --- = 1.0MHz Source-Drain Ratings and Characteristics IS ISM VSD trr Qrr Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Min. Typ. Max. Units 2.3 110 --- --- --- --- 59 110 1.3 89 170 A V ns nC Conditions MOSFET symbol showing the G integral reverse p-n junction diode. TJ = 25C, IS = 2.3A, VGS = 0V TJ = 25C, IF = 2.3A di/dt = 100A/s D S Notes: Repetitive rating; pulse width limited by max. junction temperature. Pulse width 400s; duty cycle 2%. Surface mounted on 1 in square Cu board. Starting TJ = 25C, L = 2.3mH, RG = 25, IAS = 14A. (See Figure 12). 2 ISD 14A, di/dt 140A/s, VDD V(BR)DSS, TJ 150C. Limited by TJmax , see Fig.16c, 16d, 19, 20 for typical repetitive avalanche performance. www.irf.com IRF7484PbF 100000 10000 VGS 7.5V 7.0V 4.5V 3.0V 2.5V 2.3V 2.0V BOTTOM 1.8V VGS 7.5V 7.0V 4.5V 3.0V 2.5V 2.3V 2.0V BOTTOM 1.8V TOP 1000 100 10 1 1.8V 0.1 20s PULSE WIDTH Tj = 25C ID, Drain-to-Source Current (A) ID, Drain-to-Source Current (A) 10000 TOP 1000 100 10 1.8V 1 20s PULSE WIDTH Tj = 150C 0.01 0.1 0.1 1 10 100 0.1 1 VDS, Drain-to-Source Voltage (V) 2.0 R DS(on) , Drain-to-Source On Resistance 100.00 TJ = 150C T J = 25C VDS = 15V 20s PULSE WIDTH 0.10 1.0 2.0 3.0 VGS, Gate-to-Source Voltage (V) Fig 3. Typical Transfer Characteristics www.irf.com 4.0 I D = 14A 1.5 (Normalized) ID, Drain-to-Source Current () 1000.00 1.00 100 Fig 2. Typical Output Characteristics Fig 1. Typical Output Characteristics 10.00 10 VDS, Drain-to-Source Voltage (V) 1.0 0.5 V GS = 10V 0.0 -60 -40 -20 0 20 40 60 TJ , Junction Temperature 80 100 120 140 ( C) Fig 4. Normalized On-Resistance Vs. Temperature 3 160 IRF7484PbF 100000 VGS , Gate-to-Source Voltage (V) Coss Crss 100 10 5 4 3 2 1 0 1 10 0 100 20 1000 ID, Drain-to-Source Current (A) 1000 100 10 T J = 25C 1 VGS = 0V 0.10 0.4 0.6 40 50 60 70 80 OPERATION IN THIS AREA LIMITED BY R DS(on) 100 T J = 150C 0.2 30 Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage ISD, Reverse Drain Current (A) 10 QG, Total Gate Charge (nC) VDS, Drain-to-Source Voltage (V) 0.8 1.0 1.2 VSD, Source-to-Drain Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage 4 VDS = 32V VDS = 20V VDS = 8V 6 Ciss 1000 ID = 14A 7 Coss = Cds + Cgd 10000 C, Capacitance(pF) 8 VGS = 0V, f = 1 MHZ Ciss = Cgs + Cgd, Cds SHORTED Crss = Cgd 1.4 100sec 10 1msec 10msec 1 Tc = 25C Tj = 150C Single Pulse 0.1 0 1 10 100 1000 VDS , Drain-toSource Voltage (V) Fig 8. Maximum Safe Operating Area www.irf.com IRF7484PbF 15 RD VDS VGS 12 D.U.T. ID , Drain Current (A) RG + -V DD 9 VGS Pulse Width 1 s Duty Factor 0.1 % 6 Fig 10a. Switching Time Test Circuit 3 VDS 90% 0 25 50 75 100 125 150 ( C) TC , Case Temperature 10% VGS Fig 9. Maximum Drain Current Vs. Case Temperature td(on) tr t d(off) tf Fig 10b. Switching Time Waveforms (Z thJA ) 100 D = 0.50 10 0.20 Thermal Response 0.10 0.05 P DM 0.02 1 t1 0.01 t2 SINGLE PULSE (THERMAL RESPONSE) Notes: 1. Duty factor D = 2. Peak T 0.1 0.0001 0.001 0.01 0.1 1 t1/ t 2 J = P DM x Z thJA 10 +T A 100 100 t 1, Rectangular Pulse Duration (sec) Fig 11. Typical Effective Transient Thermal Impedance, Junction-to-Ambient www.irf.com 5 16.0 15.0 14.0 13.0 12.0 ID = 14A 11.0 10.0 9.0 8.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 RDS (on) , Drain-to-Source On Resistance (m ) RDS(on) , Drain-to -Source On Resistance (m) IRF7484PbF 9.40 9.30 9.20 9.10 9.00 VGS = 7.0V 8.90 8.80 8.70 8.60 0 VGS, Gate -to -Source Voltage (V) 60 80 100 120 Fig 13. Typical On-Resistance Vs. Drain Current 1.8 50 1.7 1.6 40 1.5 ID = 250A 1.4 1.3 1.2 Power (W) VGS(th) Gate threshold Voltage (V) 40 ID , Drain Current (A) Fig 12. Typical On-Resistance Vs. Gate Voltage 30 20 1.1 1.0 10 0.9 0 0.8 -75 -50 -25 0 25 50 75 100 125 150 175 200 T J , Temperature ( C ) 6 20 Fig 14. Typical Threshold Voltage Vs. Junction Temperature 1.00 10.00 100.00 1000.00 Time (sec) Fig 15. Typical Power Vs. Time www.irf.com IRF7484PbF 520 EAS , Single Pulse Avalanche Energy (mJ) 416 TOP ID 6.3A 11A BOTTOM 14A 15V 312 208 DRIVER L VDS D.U.T RG + V - DD IAS 20V 104 tp A 0.01 Fig 16c. Unclamped Inductive Test Circuit 0 25 50 75 100 Starting Tj, Junction Temperature 125 150 ( C) V(BR)DSS Fig 16a. Maximum Avalanche Energy Vs. Drain Current tp I AS Fig 16d. Unclamped Inductive Waveforms Current Regulator Same Type as D.U.T. QG 50K 12V VGS .2F .3F D.U.T. QGS + V - DS QGD VG VGS 3mA IG ID Current Sampling Resistors Fig 17. Gate Charge Test Circuit www.irf.com Charge Fig 18. Basic Gate Charge Waveform 7 IRF7484PbF 100 Duty Cycle = Single Pulse Avalanche Current (A) 10 Allowed avalanche Current vs avalanche pulsewidth, tav assuming Tj = 25C due to avalanche losses 0.01 1 0.05 0.10 0.1 0.01 1.0E-06 1.0E-05 1.0E-04 1.0E-03 1.0E-02 1.0E-01 1.0E+00 1.0E+01 1.0E+02 1.0E+03 tav (sec) Fig 19. Typical Avalanche Current Vs.Pulsewidth 250 TOP Single Pulse BOTTOM 10% Duty Cycle ID = 14A EAR , Avalanche Energy (mJ) 225 200 175 150 125 100 75 50 25 0 25 50 75 100 125 Starting T J , Junction Temperature (C) Fig 20. Maximum Avalanche Energy Vs. Temperature 8 150 Notes on Repetitive Avalanche Curves , Figures 15, 16: (For further info, see AN-1005 at www.irf.com) 1. Avalanche failures assumption: Purely a thermal phenomenon and failure occurs at a temperature far in excess of Tjmax. This is validated for every part type. 2. Safe operation in Avalanche is allowed as long asTjmax is not exceeded. 3. Equation below based on circuit and waveforms shown in Figures 12a, 12b. 4. PD (ave) = Average power dissipation per single avalanche pulse. 5. BV = Rated breakdown voltage (1.3 factor accounts for voltage increase during avalanche). 6. Iav = Allowable avalanche current. 7. T = Allowable rise in junction temperature, not to exceed Tjmax (assumed as 25C in Figure 15, 16). tav = Average time in avalanche. D = Duty cycle in avalanche = t av *f ZthJC(D, tav ) = Transient thermal resistance, see figure 11) PD (ave) = 1/2 ( 1.3*BV*Iav) = DT/ ZthJC Iav = 2DT/ [1.3*BV*Zth] EAS (AR) = PD (ave) *tav www.irf.com IRF7484PbF SO-8 Package Details D 5 A 8 6 7 6 5 H 1 2 3 0.25 [.010] 4 A MAX MIN .0532 .0688 1.35 1.75 A1 .0040 .0098 0.10 0.25 b .013 .020 0.33 0.51 c .0075 .0098 0.19 0.25 D .189 .1968 4.80 5.00 E .1497 .1574 3.80 4.00 e .050 BASIC 1.27 BASIC e1 6X e e1 A1 8X b 0.25 [.010] A MILLIMETERS MIN A E INCHES DIM B MAX .025 BASIC 0.635 BASIC H .2284 .2440 5.80 6.20 K .0099 .0196 0.25 0.50 L .016 .050 0.40 1.27 y 0 8 0 8 K x 45 C y 0.10 [.004] 8X L 8X c 7 C A B F OOTPRINT NOT ES : 1. DIMENS IONING & TOLERANCING PER ASME Y14.5M-1994. 8X 0.72 [.028] 2. CONT ROLLING DIMENS ION: MILLIMET ER 3. DIMENS IONS ARE SHOWN IN MILLIMETERS [INCHES]. 4. OUTLINE CONFORMS TO JEDEC OUTLINE MS -012AA. 5 DIMENS ION DOES NOT INCLUDE MOLD PROT RUSIONS . MOLD PROTRUS IONS NOT TO EXCEED 0.15 [.006]. 6 DIMENS ION DOES NOT INCLUDE MOLD PROT RUSIONS . MOLD PROTRUS IONS NOT TO EXCEED 0.25 [.010]. 6.46 [.255] 7 DIMENS ION IS T HE LENGT H OF LEAD FOR SOLDERING TO A S UBST RAT E. 3X 1.27 [.050] 8X 1.78 [.070] SO-8 Part Marking EXAMPLE: THIS IS AN IRF7101 (MOS FET) INT ERNAT IONAL RECTIFIER LOGO XXXX F7101 DATE CODE (YWW) P = DES IGNATES LEAD-FREE PRODUCT (OPTIONAL) Y = LAS T DIGIT OF T HE YEAR WW = WEEK A = AS S EMBLY S ITE CODE LOT CODE PART NUMBER Notes: 1. For an Automotive Qualified version of this part please seehttp://www.irf.com/product-info/auto/ 2. For the most current drawing please refer to IR website at http://www.irf.com/package/ www.irf.com 9 IRF7484PbF SO-8 Tape and Reel TERMINAL NUMBER 1 12.3 ( .484 ) 11.7 ( .461 ) 8.1 ( .318 ) 7.9 ( .312 ) FEED DIRECTION NOTES: 1. CONTROLLING DIMENSION : MILLIMETER. 2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS(INCHES). 3. OUTLINE CONFORMS TO EIA-481 & EIA-541. 330.00 (12.992) MAX. 14.40 ( .566 ) 12.40 ( .488 ) NOTES : 1. CONTROLLING DIMENSION : MILLIMETER. 2. OUTLINE CONFORMS TO EIA-481 & EIA-541. Data and specifications subject to change without notice. This product has been designed and qualified for the Consumer market. Qualifications Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.09/2010 10 www.irf.com