AOD2610/AOI2610 60V N-Channel MOSFET General Description Product Summary VDS * Trench Power MV MOSFET technology * Low RDS(ON) * Low Gate Charge * Optimized for fast-switching applications Applications ID (at VGS=10V) 60V 46A RDS(ON) (at VGS=10V) < 10.7m RDS(ON) (at VGS=4.5V) < 13.5m 100% UIS Tested 100% Rg Tested * Synchronous Rectification in DC/DC and AC/DC Converters * Industrial and Motor Drive applications TO-251A IPAK TO-252 DPAK Top View Top View Bottom View D Bottom View D D D D G S S G G D S S D G G S Orderable Part Number Package Type Form Minimum Order Quantity AOD2610 AOI2610 TO-252 TO-251A Tape & Reel Tube 2500 4000 Absolute Maximum Ratings TA=25C unless otherwise noted Parameter Drain-Source Voltage Symbol VDS VGS Gate-Source Voltage TC=25C Continuous Drain Current G Pulsed Drain Current C TA=25C Continuous Drain Avalanche Current Avalanche energy L=0.1mH VDS Spike 10s TC=25C Power Dissipation B C Junction and Storage Temperature Range Thermal Characteristics Parameter Maximum Junction-to-Ambient A Maximum Junction-to-Ambient A D Maximum Junction-to-Case Rev.1.0: December 2014 IAS 36 A EAS 65 mJ 72 V 71.5 2.5 Steady-State Steady-State W 1.6 TJ, TSTG Symbol t 10s W 35.5 PDSM TA=70C A 8 PD TA=25C Power Dissipation A A 10 VSPIKE TC=100C V 140 IDSM C 20 36 IDM TA=70C Current Units V 46 ID TC=100C Maximum 60 RJA RJC -55 to 175 Typ 15 41 1.7 www.aosmd.com C Max 20 50 2.1 Units C/W C/W C/W Page 1 of 6 Electrical Characteristics (TJ=25C unless otherwise noted) Symbol Parameter STATIC PARAMETERS Drain-Source Breakdown Voltage BVDSS Conditions Min ID=250A, VGS=0V Zero Gate Voltage Drain Current IGSS VGS(th) Gate-Body leakage current VDS=0V, VGS=20V Gate Threshold Voltage VDS=VGS, ID=250A 1.4 TJ=125C VGS=4.5V, ID=20A gFS Forward Transconductance VSD Diode Forward Voltage IS=1A,VGS=0V IS Maximum Body-Diode Continuous Current G Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance A 100 nA 2.0 2.5 V 8.7 10.7 15.7 18.9 10.7 13.5 m 1 V 46 A 85 0.72 DYNAMIC PARAMETERS Input Capacitance Ciss Coss V 5 VGS=10V, ID=20A VDS=5V, ID=20A Units 1 TJ=55C Static Drain-Source On-Resistance Max 60 VDS=60V, VGS=0V IDSS RDS(ON) Typ S 2007 VGS=0V, VDS=30V, f=1MHz f=1MHz 0.6 m pF 177 pF 12.5 pF 1.2 1.8 SWITCHING PARAMETERS Qg(10V) Total Gate Charge 20.6 30 nC Qg(4.5V) Total Gate Charge 8.5 13 nC Qgs Gate Source Charge 5 nC Qgd Gate Drain Charge 2.2 nC tD(on) Turn-On DelayTime 8.5 ns VGS=10V, VDS=30V, ID=20A VGS=10V, VDS=30V, RL=1.5, RGEN=3 3.5 ns 27 ns 3 ns IF=20A, dI/dt=500A/s 19 ns nC tr Turn-On Rise Time tD(off) Turn-Off DelayTime tf trr Turn-Off Fall Time Qrr Body Diode Reverse Recovery Charge IF=20A, dI/dt=500A/s Body Diode Reverse Recovery Time 69.5 A. The value of RJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25C. The Power dissipation PDSM is based on R JA and the maximum allowed junction temperature of 150C. The value in any given application depends on the user's specific board design, and the maximum temperature of 175C may be used if the PCB allows it. B. The power dissipation PD is based on TJ(MAX)=175C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C. Single pulse width limited by junction temperature TJ(MAX)=175C. D. The RJA is the sum of the thermal impedance from junction to case RJC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300s pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of TJ(MAX)=175C. The SOA curve provides a single pulse rating. G. The maximum current rating is package limited. H. These tests are performed with the device mounted on 1 in2 FR-4 board with 2oz. Copper, in a still air environment with TA=25C. THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev.1.0: December 2014 www.aosmd.com Page 2 of 6 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 100 10V 100 4.5V VDS=5V 4V 80 80 60 ID(A) ID (A) 60 3.5V 40 40 125C 25C 20 20 VGS=3V 0 0 0 1 2 3 4 1 5 2 3 4 5 VGS(Volts) Figure 2: Transfer Characteristics (Note E) VDS (Volts) Figure 1: On-Region Characteristics (Note E) 14 2.4 Normalized On-Resistance 2.2 RDS(ON) (m) 12 VGS=4.5V 10 8 VGS=10V VGS=10V ID=20A 2 1.8 1.6 1.4 VGS=4.5V ID=20A 1.2 1 0.8 6 0 5 10 15 20 25 0 30 25 50 75 100 125 150 175 200 Temperature (C) Figure 4: On-Resistance vs. Junction Temperature (Note E) ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage (Note E) 24 1.0E+02 ID=20A 1.0E+01 20 1.0E+00 16 IS (A) RDS(ON) (m) 125C 125C 1.0E-01 25C 1.0E-02 12 1.0E-03 8 25C 1.0E-04 4 1.0E-05 2 4 6 8 10 VGS (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage (Note E) Rev.1.0: December 2014 www.aosmd.com 0.0 0.2 0.4 0.6 0.8 1.0 1.2 VSD (Volts) Figure 6: Body-Diode Characteristics (Note E) Page 3 of 6 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 10 3000 VDS=30V ID=20A 2500 Capacitance (pF) VGS (Volts) 8 6 4 Ciss 2000 1500 1000 2 500 Coss Crss 0 0 0 5 10 15 20 25 0 Qg (nC) Figure 7: Gate-Charge Characteristics 30 40 50 60 500 RDS(ON) limited 10.0 10s 100s 1ms 10ms 1.0 TJ(Max)=175C TC=25C DC 400 Power (W) 10s 100.0 ID (Amps) 20 VDS (Volts) Figure 8: Capacitance Characteristics 1000.0 TJ(Max)=175C TC=25C 0.1 0.0 0.01 300 200 100 0.1 1 VDS (Volts) 10 0 0.0001 0.001 0.01 100 0.1 1 10 100 1000 Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toCase (Note F) VGS> or equal to 4.5V Figure 9: Maximum Forward Biased Safe Operating Area (Note F) 10 ZJC Normalized Transient Thermal Resistance 10 In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse D=Ton/T TJ,PK=TC+PDM.ZJC.RJC RJC=2.1C/W 1 0.1 PDM Single Pulse Ton T 0.01 1E-05 0.0001 0.001 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance (Note F) Rev.1.0: December 2014 www.aosmd.com Page 4 of 6 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 120 100 TA=100C TA=25C Power Dissipation (W) IAR (A) Peak Avalanche Current 1000 100 TA=150C 10 TA=125C 80 60 40 20 1 0 1 10 100 1000 0 25 75 100 125 150 TCASE (C) Figure 13: Power De-rating (Note F) Time in avalanche, tA (s) Figure 12: Single Pulse Avalanche capability (Note C) 50 175 10000 60 TA=25C 50 Power (W) Current rating ID(A) 1000 40 30 100 20 10 10 0 0 25 50 75 100 125 150 175 1 1E-05 0.1 10 1000 Pulse Width (s) Figure 15: Single Pulse Power Rating Junction-toAmbient (Note H) TCASE (C) Figure 14: Current De-rating (Note F) ZJA Normalized Transient Thermal Resistance 0.001 10 1 D=Ton/T TJ,PK=TA+PDM.ZJA.RJA RJA=50C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 0.1 PD 0.01 Single Pulse Ton 0.001 0.0001 0.001 0.01 0.1 1 10 T 100 1000 Pulse Width (s) Figure 16: Normalized Maximum Transient Thermal Impedance (Note H) Rev.1.0: December 2014 www.aosmd.com Page 5 of 6 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + Vds VDC - Qgs Qgd VDC - DUT Vgs Ig Charge Resistive Switching Test Circuit & Waveforms RL Vds Vds DUT Vgs 90% + Vdd VDC - Rg 10% Vgs Vgs td(on) tr td(off) ton tf toff Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L 2 EAR= 1/2 LIAR Vds BVDSS Vds Id + Vdd Vgs Vgs I AR VDC - Rg Id DUT Vgs Vgs Diode Recovery Test Circuit & Waveforms Q rr = - Idt Vds + DUT Vds - Isd Vgs Ig Rev.1.0: December 2014 Vgs L Isd + Vdd t rr dI/dt I RM Vdd VDC - IF Vds www.aosmd.com Page 6 of 6