1.6X1.25mm BI-COLOR SMD CHIP LED LAMP Part Number: APTB1612SURKCGKC-F01 Hyper Red Green Features Description z 1.6mmx1.25mm SMT LED, 0.65mm thickness. The Hyper Red source color devices are made with Al- z Bi-color, low power consumption. GaInP on GaAs substrate Light Emitting Diode. z Wide viewing angle. The Green source color devices are made with AlGaInP on z Ideal for backlight and indicator. GaAs substrate Light Emitting Diode. z Various colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions RED GREEN Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH3786 REV NO: V.5A DATE: MAR/16/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002054 Selection Guide Part No. Dice Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 120 200 *40 *80 20 50 *20 *50 21/2 Hyper Red (AlGaInP) APTB1612SURKCGKC-F01 Water Clear Green (AlGaInP) 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Hyper Red Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 645 574 nm IF=20mA Hyper Red Green 630 570 nm IF=20mA Spectral Line Half-width Hyper Red Green 28 20 nm IF=20mA C Capacitance Hyper Red Green 35 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green 1.95 2.1 2.5 2.5 V IF=20mA IR Reverse Current Hyper Red Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 150 mA Reverse Voltage 5 Operating Temperature -40C To +85C Storage Temperature -40C To +85C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH3786 REV NO: V.5A DATE: MAR/16/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002054 APTB1612SURKCGKC-F01 Hyper Red SPEC NO: DSAH3786 REV NO: V.5A DATE: MAR/16/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002054 Green SPEC NO: DSAH3786 REV NO: V.5A DATE: MAR/16/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002054 APTB1612SURKCGKC-F01 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAH3786 REV NO: V.5A DATE: MAR/16/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002054 PACKING & LABEL SPECIFICATIONS APTB1612SURKCGKC-F01 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAH3786 REV NO: V.5A DATE: MAR/16/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002054