SZN CONNECTOR 1.5mm pitch/Board-in crimp style connectors Specifications ------------------- This low-profile, board-in connector, with a mounting height of only 4.25mm and a thickness of 2.4mm, is soldered directly onto printed circuit boards. The solder tail of the contact is resilient for easy assembly. The housing lances facilitate insertion of contacts. * Slim, low-profile design * Housing lances * Easy mounting onto printed circuit boards * Rugged contact construction * Current rating: 0.7A AC, DC (AWG #26) * Voltage rating: 50V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Insulation resistance: 500M min. * Withstanding voltage: 500V AC/minute * Applicable wire: AWG #30 to #26 * Applicable PC board thickness: 0.6 to 1.2mm * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 PC board layout (viewed from soldering side) and Assembly layout 2.4 2.8 2 to 6 circuits:0.70 0.03 7 to 13 circuits:0.75 0.03 4.25 1.4 min 1.5 0.03 1.25 min Note: 1. Tolerances are non-cumulative: 0.03mm for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. 1 SZN CONNECTOR Contact Applicable wire AWG# mm2 Model No. 2.2 0.65 0.84 SZN-002T-P0.7K SZN-003T-P0.7K Insulation O.D.mmQ'ty / reel 0.080.13 2826 0.81.1 14,000 0.050.08 3028 0.70.9 15,000 Material and Finish Phosphor bronze, tin-plated (reflow treatment) 6.8 1.2 1.0 1.2 0.5 RoHS compliance Note: Contact JST for brass products. Crimping machine Crimp applicator Contact SZN-002T-P0.7K AP-K2N Applicator Dies Crimp applicator with dies MKS-L MK/SZN-002-07 APLMK SZN002-07 Contact Applicator Dies Crimp applicator with dies MKS-L MK/SZN-003-07 APLMK SZN003-07 *MKS-SC SC/SZN-003-07 APLSC SZN003-07 Crimping machine Crimp applicator SZN-003T-P0.7K AP-K2N Note: *Strip-crimp applicator Housing Circuits Model No. 2 2P-SZN 3P-SZN 4P-SZN 5P-SZN 6P-SZN 7P-SZN 8P-SZN 9P-SZN 10P-SZN 11P-SZN 12P-SZN 13P-SZN 3 B A 4 2.4 1.5 5 0.25 1.25 6 JST 7 3 4 5 4.25 8 9 10 11 12 2.05 13 A Dimensions (mm) B 4.0 1,000 3.0 5.5 1,000 4.5 7.0 1,000 6.0 8.5 1,000 7.5 10.0 1,000 9.0 11.5 1,000 10.5 13.0 1,000 12.0 14.5 1,000 13.5 16.0 1,000 15.0 17.5 1,000 16.5 19.0 1,000 18.0 20.5 1,000 Material PA 66, UL94V-0, natural (white) RoHS compliance 2 Q'ty / bag 1.5