PERFORMANCE CHARACTERISTICS
Calibration : 200% rated current,
77°F (25°C) 8 to 50 seconds
Ultimate Trip At 77°F (25°C) Must hold 100%, Must trip 138%
Endurance
Per SAE J553:
Automatic:2,000cycles@200%ratedcurrent
Manual:500cycles@200%ratedcurrent
Interrupt Current Capacity Per SAE J553, 600A
Vibration 10G MIL-STD-202 Method 204, Condition A
Mechanical Shock 100G MIL-STD-202 Method 213, Condition C
Dielectric Strength MIL-STD-202 Method 301, 1500VAC min
Insulation Resistance MIL-STD-202 Method 302, Condition B,
100 MΩ min
Weight 9115-5 : 65 grams max
9115-6 : 76 grams max
FEATURES
• 30VDC,15to30Amps
• Sealedassemblies,availableinmanualandautomaticresetoptions
• IgnitionprotectedSAEJ1171&CCCcertied
• 9115-5meetsCIDA-A-55571/01specications
• 9115-6meetsCIDA-A-55571/02specications
• ULRecognizedE36869
DESCRIPTION
The KLIXON® 9115 series of circuit breakers was designed for
waterproof electrical systems of ordnance vehicles. The 9115 series is
recommended for other mobile military and ground equipment, including
trucks, tractors, graders, earth movers, fuel units, and amphibious as well
as commercial vehicles. In addition to a complete sealed thermal element
this series of thermal breakers has molded in terminals and are supplied
with rubber connectors (shells).
ORDERING INFORMATION
Configuration
9115-5 = Auto, sealed
9115-6 = Manual, sealed
X − X
Amp Rating
(15, 20, 25, 30)
9115 Series
15 to 30 Amp Precision Thermal Circuit Breaker
9115 Series
25
Notes:
1. Shell female MS33800 mates with MS27143 or MS27144.
2.000±.032 [50.8±.813]
DOES NOT INCLUDE
SEALING GASKET
2X #8-32 MOUNTING NUTS
1.187
1.574
± .032 [15.88 ± .813]
± .032
.485
[12.32]
.625
2X R
± .008
.843 ± .032 [21.41 ± .813]
SHELL, FEMALE
MS33800
2X( .700 [17.78])
.960 [24.4]
.470 [11.94])2X (
1.875 [47.63] MAX.
INCHES [MM]
.174 ± .0022X
[4.42 ± .051]
MTG. HOLE
2X
DIMENSIONS - 9115-5
TRIP CURVE - Approximate Time, Current Characteristics At 77°F (25°C)
1000
500
100
.10 110
Trip Time in Seconds
Current in % Rated Load
100 1000 10,000
2.000±.032 [50.8±.813]
DOES NOT INCLUDE
SEALING GASKET
2X #8-32 MOUNTING NUTS
1.187
1.574
± .032 [15.88 ± .813]
± .032
.485
[12.32]
.625
2X R
± .008
.843 ± .032 [21.41 ± .813]
SHELL, FEMALE
MS33800
.562 [14.27]
MIN. PANEL HOLE
2X(
.440 [ 11.18]
.700 [17.78])
.960 [24.4]
.470 [11.94])2X (
.500 [12.7]
1.875 [47.63] MAX.
INCHES [MM]
DIMENSIONS - 9115-6
www.sensata.com 26
http://www.sensata.com/
BUSINESS CENTER
Sensata Technologies Inc.
529 Pleasant Street
Attleboro, MA 02703, USA
Phone: +1 508-236-3800
Fax: +1 508-236-2349
©2013 Sensata Technologies, Inc. All rights reserved worldwide. Printed in USA, revised April 2013.
Important Notice: Sensata Technologies reserves the right to make changes to, or to discontinue, any product or service
identified in this publication without notice. Before placing orders, users should obtain the latest version of the relevant
information to verify that the information being relied upon is current.
Sensata Technologies assumes no responsibility for customers’ product designs or applications. Users must determine the
suitability of the Sensata device described in this publication for their application, including the level of reliability required.
Many factors beyond Sensata’s control can affect the use and performance of a Sensata product in a particular application,
including the conditions under which the product is used and the time and environmental conditions in which the product
is expected to perform. As these factors are uniquely within the user’s knowledge and control, it is essential that the user
evaluate the Sensata product to determine whether it is fit for a particular purpose and suitable for the user’s application.
Sensata Technologies products are sold subject to Sensata’s Terms and Conditions of Sale which can be found at:
www.sensata.com/terms.htm
