Mini-Circuits - Specification for Frequency Mixer - SRA-6H
Frequency Mixers
print this page
LO Power Level 17 dBm
Pin Configuration
Port LO RF IF Gnd Ext. Case Gnd Not Used
e 8 1 3,4^ 2,5,6,7 2 -
^ pins must be connected together externally.
Outline Drawing
Case Style - A01 (inch,mm ) weight: 5.2 grams.
A B C D E F G H J
.770
19.558 .800
20.320 .385
9.779 .400
10.160 .370
9.398 .400
10.160 .200
5.080 .20
5.080 .14
3.556
K L M N P Q R S T
.031
0.787
Tolerance: .x ± .1 .xx ± .03 .xxx ± .015 inch.
Material and Finish:
Header material: C.R.S. Pin material: #52 alloy. Finish: electro
tin, hot-oil flowed. Cover material:upro-nickel.
Mounting:
Insulated spacer available. Request P/N B14-045-01.
Pin's meniscus (of header): 0.015" max.
Special Tolerances:
Pin diameter ±.005 inch.
Notes:
•+17 dBm LO, up to +10 dBm RF
•Absolute maximum power, voltage and
current ratings:
a. RF power, 200mW
b. Peak IF current, 40mA
•General Quality Control Procedures and
Environmental Specifications are given in
Mini- Circuits Guarantees Quality.
Hi-Rel, MIL description are given in Hi-Rel
and MIL
•Prices and Specifications subjects to
change without notice.
SRA-6H
Electrical Specifications
SRA-6H LO Power Level 17 dBm
Frequency
MHz Max. Conversion
Loss dB Min. LO-RF
Isolation dB Min. LO-IF
Isolation dB
LO/RF IF Mid-Band Total Range L M U L M U
0.010-50 DC-50 6.0 7.0 45 30 25 40 35 25
L=low range(fL to 10fL) M=mid range(10fL to fU/2) U=upper range(fU/2 to
fU)
http://www.minicircuits.com/cgi-bin/spec?cat=mixer&model=SRA-6H&pix=a01.gif&bv=4 (1 of 2) [7/9/2004 2:28:03 PM]
i2 Technologies US, Inc.
HTML Pages converted to PDF Document
This document contain component information from the
manufacturer's website which are not available in a revision
controlled document from the manufacturer. To facilitate the
addition of these parts into the Electronics Database, we are
converting the HTML pages related to that part, from the
manufacturer's website into Adobe PDF format. The contents of this
document is based on the information provided on the
manufacturer's website, therefore the information may have been
changed by the manufacturer since this was created.
Powering the Bottom Line ®
i2 Technologies US, Inc.
15445 Innovation Drive
San Diego, CA 92128
