FC2358003-00 A 1 of 2
Simplify
Q
Designed and deployed by major server and storage
OEMs, QLogic’s SANblade QLA2310F and QLA2310FL host
bus adapters (HBAs) offer the high performance of 2-Gb Fibre
Channel combined with 64-bit, 66-MHz PCI-X. These
multimode optic HBAs are targeted for servers in direct attach
storage (DAS) as well as storage area network (SAN)
environments.
For a cost-effective, optic solution for your SAN with the
added performance of 2 Gb, the QLA2310F is the right
solution.
If you are looking for low-profile boards for 1U and 2U
servers, the QLA2310FL, a low-profile MD2 compliant version
of the QLA2310F, is the perfect fit.
Driving the standard for interoperability with extensive Fibre
Channel testing in SAN environments, you can feel confident
in choosing the QLogic solution.
Features
■Unique, single-integrated Fibre Channel controller for
added reliability and optimum performance
■Autonegotiation of Fibre Channel speed bit rate
(1 Gb or 2 Gb)
■Automatic topology detection
■Concurrent support for SCSI and IP protocols
■Simultaneous initiator and target mode support
■Easy detection of activities through an LED panel:
❒Power
❒Online
❒Signal acquired
❒Loss of synchronization
❒Firmware error
■HBA and LUN level failover
■Persistent binding
■LUN masking
■Local and remote management
■Load balancing for optimized performance
■Diagnostics
❒Loop back test
❒Read/write buffer tests
QLA2310F/2310FL Data Sheet
2-Gb Fibre Channel to PCI-X Host Bus Adapters
2 of 2 FC2358003-00 A
M
Host Bus Interface Specifications
Speed 64-bit, 66-MHz PCI-X
Voltage 3.3 V and 5.0 V buses supported
Compliance Conforms to PCI Local Bus Specification rev. 2.2, PCI-X Addendum rev. 1.0a, PCI Hot Plug Specification rev. 1.0, PCI Bus Power Management Interface
Specification rev. 1.1
Fibre Channel Specifications
Speed 200 MBps maximum at half-duplex, 400 MBps maximum at full-duplex
Compliance Second Generation FC Generic Services Definition (FC-GS-2), Third Generation FC Generic Services Definition (FC-GS-3), Fibre Channel-Physical and Signaling
Interface (FC-PH), SCSI-3 Fibre Channel Protocol (SCSI-FCP), Fibre Channel-Arbitrated Loop-2 (FC-AL-2), Fibre Channel-Private Loop Direct Attach Technical
Report (FC-PLDA), RFC 2625 IP and APR Over Fibre Channel, Fibre Channel Framing and Signaling (FC-FS)
Topology FC-AL, FC-AL-2, point to point, switched fabric (FL_Port and F_Port)
Class of service Class 3 Fibre Channel service
Protocol SCSI-FCP, IP, FC-TAPE
Buffer credits For 512-byte frame size, 9 credits issued. For 2K-byte frame size, 3 credits issued.
HBA Physical Specifications
Ports One
Media Multimode optic
Optics Short wave laser
Form factor Half size: 17.78 cm×10.67 cm (7.0"×4.2") (QLA2310F); Low-profile MD2: 16.93 cm×5.15 cm (6.7"×2.5") (QLA2310FL)
Bracket size QLA2310F: standard size; QLA2310FL: low-profile size
Connectors LC-style connector that supports non-OFC, multimode fibre optic cabling using a small form factor optical transceiver module
Power
consumption
~ 4.75 watts
HBA Environment
Airflow 0 lf/m
Temperature Operating: 0°C/32°F to 55°C/131°F. Storage: –20°C/–4°F to 70°C/158°F
Humidity Relative (noncondensing): 10% to 90%, Storage: 5% to 95%
Distance 1 Gbps: 500 meters 50/125 µm fiber, 300 meters 62.5/125 µm fiber
2 Gbps: 300 meters 50/125 µm fiber, 150 meters 62.5/125 µm fiber
Cable 50/125µm multimode fiber, 62.5/125 µm multimode fiber
Agency Approvals—Product Safety Agency Approvals—EMI and EMC
US/Canada UL, cUL
UL1950 (QLA2310FL)
UL60950 (QLA2310F)
cUL C22.2 No.950 (QLA2310FL)
CSA C22.2 No.60950 (QLA2310F)
Class 1 Laser Product per DHHS 21CFR (J)
US FCC Part 15, Class B
Canada Industry Canada ICES-003, Class B (QLA2310FL only)
Europe 89/336/EEC EMC Directive CE Mark:
EN55022: 1995 Class B
EN55024: 1998:
EN61000-3-2:1995
EN61000-3-3:1994
Japan VCCI, Class B
Taiwan CNS 13438 Class B BSMI
New Zealand/ AS/NZS 3548 Class B
Australia
Korea MIC
Europe 73/23/ECC Low Voltage Directive:
TUV:
EN60950: 1992+A1,2,3,4,11
EN60825-1: 1994+A11
EN60825-2: 1994
Software
SANblade
Manager
Easy to use, Java-based, configuration, diagnostics and analysis HBA management application for heterogeneous SAN management across multiple hosts.
Includes failover, LUN masking, and persistent binding capabilities.
SANblade
Control FX
Wizard-based utility provided for installation, configuration, persistent binding, and diagnostic functions on the local host.
Operating
System drivers
Windows Server 2003 (32-bit and 64-bit), Windows NT, Windows 2000, Windows XP, Solaris SPARC, Linux (32-bit and 64-bit), Novell NetWare
Flash utilities Configuration utilities resident with BIOS and FCode
Boot support Intel x86: BIOS (32-bit), EFI (64-bit); Solaris SPARC: FCode
Ordering Information
QLA2310F Ships to OEMs in an individually packed box with a standard size bracket.
QLA2310F-BK Ships to OEMs in a bulk pack box in quantities of 20, 50, or 100 with standard size brackets.
QLA2310F-CK Ships to authorized distributors and resellers in an individually packed box with a standard size bracket and the SANsurfer Management Suite CD.
QLA2310FL Ships to OEMs in an individually packed box with a low-profile size bracket.
QLA2310FL-BK Ships to OEMs in a bulk pack box in quantities of 20, 50, or 100 with low-profile size brackets.
QLA2310FL-CK Ships to authorized distributors and resellers in an individually packed box with a low-profile size bracket and the SANsurfer Management Suite CD.
QLogic Corporation
26650 Aliso Viejo Parkway
Aliso Viejo, CA 92656, (800) 662-4471 or (949) 389-6000
© 2003 QLogic Corporation. Specifications are subject to change without notice. All rights reserved worldwide.The QLogic logo, SANblade, SANsurfer, and SANtrack are trademarks of QLogic Corporation, which may
be registered in some jurisdictions. All other brand and product names are trademarks or registered trademarks of their respective owners.
www.qlogic.com
