SPDT PIN Diode Driver
Rev. V3
MADR-007097-000100
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Features
• Moderate Speed, CMOS Technology (25 nS)
• Complementary Outputs
• High Drive Current Capability (± 50 mA)
• Low Current Consumption
• Plastic SOIC Body for SMT Applications
• Tape and Reel Packaging Available
• Lead-Free SOIC-8 Package
• 100% Matte Tin Plating over Copper
• Halogen-Free “Green” Mold Compound
• 260°C Reflow Compatible
• RoHS* Compliant Version of DR65-0003
Description
M/A-COM's MADR-007097-000100 is a SPDT driver
used to interface between TTL logic signals and PIN
diode based microwave switches. High-speed
analog CMOS technology is used to achieve low
power consumption at moderate speeds. Low output
resistances allow it to develop high output current
spikes to ensure fast switching speeds. The
complementary output stages are structured so it
can be used as an inverting or non-inverting driver
for SPST switches, or as a single input,
complementary driver for SPDT switches. The
monolithic die is packaged in a SO-8, plastic surface
mount package and is available in tape and reel
packaging for high volume applications. The MADR-
007097-000100 driver is ideally suited for driving M/
A-COM’s line of HMIC switches.
Ordering Information
Part Number Package
MADR-007097-000100 Bulk Packaging
MADR-007097-0001TR 1000 piece reel
Note: Reference Application Note M513 for reel size
information.
Functional Block Diagram
Pin Configuration
Pin No. Function Pin No. Function
1 NON-INV OUT 5 VEE
2 GND 6 VDD
3 VCC 7 GND
4 C1
(TTL Logic)
8 INV OUT
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
SPDT PIN Diode Driver
Rev. V3
MADR-007097-000100
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Electrical Specifications: TA = +25°C, +Vcc = + Vdd = + 5.0V ± 5%, Vee = - 5.0V ±5%, Z0 = 50Ω
Parameter Test Conditions Units Min Typ Max
Switching Speed 1
Delay
Rt/Ft
Spike current into 10 ohm load
50 % TTL to 90%
10%-90%; 90%-10%
ns
ns
—
—
25
2
35
5
PRF 50% duty cycle MHz DC — 5
Output Voltage Drop, No Load With reference to supply voltage V — — 0.25
DC Output Current
Peak Spike Output Current
Load Dependant
Spiking Capacitor in Circuit
mA
mA
—
—
±30
±150
±50
±200
Output Stage on Resistance Positive Output FET, Qp
Negative Output FET, Qn
Ω
Ω
—
—
15
10
20
15
Quiescent Supply Currents +5V
-5V
mA
mA
—
—
—
—
1.5
.2
TTL Levels Logic “0” @ 20 µA sink current
Logic “1” @ 20 µA source current
V
V
0
2.0
—
—
.8
5.0
Package Dissipation — mW — — 200
Absolute Maximum Ratings 2,3
Parameter Absolute Maximum
VCC -0.5V ≤ VCC ≤ +7.0V
VDD -0.5V ≤ VDD ≤ VCC
VEE -7.0V ≤ VEE ≤ +0.5V
C1 (TTL Input Voltage) -0.5V to Vcc +0.5V
Operating Temperature -40ºC to +85ºC
Storage Temperature -65ºC to +125ºC
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Silicon Integrated Circuits are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these devices.
1. Decoupling capacitors (.01 µF) are required on power supply lines.
SPDT PIN Diode Driver
Rev. V3
MADR-007097-000100
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
SPDT Microwave Switch with Driver
SPDT PIN Diode Driver
Rev. V3
MADR-007097-000100
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
† Reference Application Note M538 for lead-free solder reflow
recommendations.
Lead-Free, SOIC-8†
