High Power Thin Film Chip Resistors NTRH Series FEATURES * IMPROVED POWER RATING (HIGHER THAN NTR SERIES) * PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT * EIA STANDARD CASE SIZES (0402 ~ 2512) * LOW NOISE, THIN FILM (NiCr) CONSTRUCTION * REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Max.*1 Max.*2 EIA Power Rating Working Overload Size at 70C Voltage Voltage RoHS Compliant includes all homogeneous materials *See Part Number System for Details Resistance Tolerance (Code) Temperature Resistance Reistance Coefficient Range Values (ppm/C) () 0.01% (T), 0.05% (A), 0.1% (B) 2 (X), 3 (O) 49.9 ~ 4.99K 0.01% (T), 0.05% (A), 0.1% (B), 0.25 (C), 0.5 (D), 1% (F) NTRH04 0402 1/10 (0.100)W 50V 100V 5 (S) 49.9 ~ 4.99K 0.01% (T), 0.05% (A) 10 (B) 15 (N) 49.9 ~ 12K 0.1% (B), 0.25 (C), 0.5 (D), 1% (F) 10 (B) 49.9 ~ 60K 0.1% (B), 0.25 (C), 0.5 (D), 1% (F) 15 (N) 49.9 ~ 69.8K 0.05% (A) 49.9 ~ 12K 25 (C) 50 (D) 0.1% (B) 0.25 (C), 0.5 (D), 1% (F) 0.01% (T), 0.05% (A), 0.1% (B) 2 (X), 3 (O) 24.9 ~ 15K 0.01% (T), 0.05% (A), 0.1% (B), 0.25 (C), 0.5 (D), 1% (F) 5 (S) 24.9 ~ 15K 24.9 ~ 100K 0.05% (A) 10 (B) 15 (N) 25 (C) 50 (D) 0.1% (B), 0.25 (C), 0.5 (D), 1% (F) 10 (B) 15 (N) 0.01% (T) NTRH06 1/10 (0.100)W 75V 150V 0603 NTRH07 1/6 (0.166)W NTRH10 100V 150V 0.05% (A), 0.1% (B), 0.25 (C), 0.5 (D), 1% (F) 0.01% (T), 0.05% (A), 0.1% (B) 0.01% (T), 0.05% (A), 0.1% (B), 0.25 (C), 0.5 (D), 1% (F) 0.01% (T) 150V NTRH12 1/4 (0.250)W 1206 1/4 (0.250)W 200V 400V 24.9 ~ 30K 5 (S) 24.9 ~ 30K 10 (B) 15 (N) 25 (C) 50 (D) 10 (B) 15 (N) 24.9 ~ 200K 25 (C) 50 (D) E24 & E-96 4.7 ~ 511K 4.7 ~ 511K 4.7 ~ 1M 4.7 ~ 1M 1.0 ~ 1M 10 ~ 499K 2 (X), 3 (O) 24.9 ~ 49.9K 0.05% (A), 0.1% (B), 0.25 (C), 0.5 (D), 1% (F) NTRH13 4.7 ~ 1M 2 (X), 3 (O) 0.1% (B), 0.25 (C), 0.5 (D), 1% (F) NTRH11 4.7 ~ 332K 10 ~ 332K 300V 0.1% (B) 0.25 (C), 0.5 (D), 1% (F) 0.05% (A), 0.1% (B), 0.25 (C), 0.5 (D), 1% (F) 0.01% (T), 0.05% (A), 0.1% (B) 0.01% (T), 0.05% (A), 0.1% (B), 0.25 (C), 0.5 (D), 1% (F) 0.01% (T) 4.7 ~ 332K 25 (C) 50 (D) 0.05% (A) 1/8 (0.125)W 0805 10 ~ 255K 4.7 ~ 255K 1/3 (0.333)W 5 (S) 24.9 ~ 49.9K 10 (B) 15 (N) 25 (C) 50 (D) 24.9 ~ 499K 25 (C) 50 (D) 4.7 ~ 1M 10 ~ 1M Continue on next page 1 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com High Power Thin Film Chip Resistors Max.*1 Max.*2 EIA Power Rating Working Overload Size at 70C Voltage Voltage Type NTRH15 1210 1/3 (0.333)W 200V 400V Resistance Tolerance (Code) Temperature Resistance Reistance Coefficient Range Values (ppm/C) () 0.01% (T), 0.05% (A), 0.1% (B) 0.01% (T), 0.05% (A), 0.1% (B), 0.25 (C), 0.5 (D), 1% (F) 0.01% (T) 0.05% (A), 0.1% (B), 0.25 (C), 0.5 (D), 1% (F) NTRH20 2010 1/3 (0.333)W 200V 400V NTRH Series 0.01% (T), 0.05% (A), 0.1% (B) 0.01% (T), 0.05% (A), 0.1% (B), 0.25 (C), 0.5 (D), 1% (F) 0.01% (T) 2 (X), 3 (O) 24.9 ~ 49.9K 5 (S) 10 (B) 24.9 ~ 499K 15 (N) 25 (C) 4.7 ~ 1M 50 (D) 2 (X), 3 (O) 24.9 ~ 49.9K 0.05% (A), 0.1% (B), 0.25 (C), 0.5 (D), 1% (F) NTRH25 0.01% (T) 0.05% (A), 0.1% (B) 3/4 (0.750)W 2512 200V NTRH26 400V 0.25 (C), 0.5 (D), 1% (F) 0.1% (B) 0.25 (C), 0.5 (D), 1% (F) 1.0W 24.9 ~ 49.9K 5 (S) 24.9 ~ 49.9K 10 (B) 15 (N) 25 (C) 50 (D) 24.9 ~ 499K 10 (B) 15 (N) 25 (C) 50 (D) 24.9 ~ 2K 4.7 ~ 2K 25 (C) 50 (D) 4.7 ~ 100 1.0 ~ 100 E24 & E-96 4.7 ~ 1M 1.0 ~ 2K ENVIRONMENTAL CHARACTERISTICS Item Specification Test Method Standard Temperature Range: -55C ~ +155C (power derating above +70C) Temperature Coefficient of Resistance As specified Short Time Overload R 0.2% Dielectric Withstanding Voltage As specified Insulation Resistance >9999M Thermal Shock Tol <0.05%: R 0.05% Tol >0.05%: R 0.2% Load Life R 0.5% Humidty (Steady State) R 0.5% High Temperature Exposure R 0.5% Low Temperature Operation R 0.5% Bending Strength Solderability Resistance to Soldering Heat Tol <0.05%: R 0.05% Tol >0.05%: R 0.1% 95% Minimum Coverage Tol <0.05%: R 0.05% Tol >0.05%: R 0.1% MIL-STD-202, Method 304 +25/-55/+25/+125/+25 JIS-C-5202-5.5 RCWV x 2.5 or Max Overloading Voltage for 5 Seconds MIL-STD-202F Method 301 Apply Max. Overload Voltage for 1 minute MIL-STD-202F Method 302 Apply 100Vdc for 1 minute MIL-STD-202F Method 107G -55C ~ +150C, 100 cycles MIL-STD-202F Method 108A RCWV +70C, 1.5 hours ON, 0.5 hours OFF Total time 1,000 ~ 1,048 hours MIL-STD-202F Method 103B +40C, 90% ~ 95% RH, RCWV 1.5 hours ON, 0.5 hours OFF Total time 1,000 ~ 1,048 hours MIL-STD-202F Method 103B 1000 hours @ +155C without load JIS-C-502-7.1 1 hour @ -65C followed by 45 minutes of RCWV JIS-C-5202-6.1.4 Bending Amplitude 3mm for 10 seconds MIL-STD-202F Method 208H 245C 5C, 5 0.5 seconds MIL-STD-202F Method 210E 260C 5C for 10 1 seconds PART NUMBER SYSTEM NTRH 10 B 1003 C TR F RoHS compliant Tape & Reel Packaging Temperature Coefficient Code: X = 2ppm, O = 3ppm, S = 5ppm, B = 10ppm, N = 15ppm, C = 25ppm, D = 50ppm Resistance Code: First 3 digits are significant figures (both E-24 and E-96 values), 4th digit is the multiplier, "R" indicates a decimal point. Tolerance Code: T = 0.01%, A = 0.05%, B = 0.1%, C = 0.25%, D = 0.5%, F = 1% Power Rating Code Series 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com High Power Thin Film Chip Resistors Note *2 - Maximum Overload Voltage for all Note *1 - Maximum allowable continuous Working Voltage resistors is the lower of the two values: "Maximum Overload Voltage" as specified above or for all resistors is the lower of the two values: "Maximum Working Voltage" as specified above or 2.5 x Power rating (Watts) x Resistance (Ohms) TYPICAL NOISE CHARACTERISTICS 100 0603 0805 1206 4.7 ~ 9 -95dB -95dB -95dB 10 ~ 49 -85dB -85dB -85dB 50 ~ 99 -85dB -85dB -85dB 100 ~ 4.99K -100dB -100dB -105dB 5K ~ 19.9K -100dB -100dB -100dB 20K ~ 1M -90dB -100dB -100dB Percentage of Power Rating Case Size Resistance Value () NTRH Series Power rating (Watts) x Resistance (Ohms) Power Derating Curve: For operation above 70C, power rating must be derated according to the following chart: 80 60 40 30 20 0 20 40 60 70 80 100 120 140 155 Temperature C STANDARD E-24, E-96 VALUES AND 0603 RESISTANCE CODES E-24 Value 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 3 Value Code 100 01 110 05 121 09 133 13 147 17 162 21 178 25 196 29 215 33 237 37 261 41 287 45 316 49 348 53 383 57 422 61 464 65 511 69 562 73 619 77 681 81 750 85 825 89 909 93 E-96 Value Code Value Code 102 02 105 03 113 06 115 07 124 10 127 11 137 14 140 15 150 18 154 19 165 22 169 23 182 26 187 27 200 30 205 31 221 34 226 35 243 38 249 39 267 42 274 43 294 46 301 47 324 50 332 51 357 54 365 55 392 58 402 59 432 62 442 63 475 66 487 67 523 70 536 71 576 74 590 75 634 78 649 79 698 82 715 83 768 86 787 87 845 90 866 91 931 94 953 95 NIC COMPONENTS CORP. www.niccomp.com Value Code 107 04 118 08 130 12 143 16 158 20 174 24 191 28 210 32 232 36 255 40 280 44 309 48 340 52 374 56 412 60 453 64 499 68 549 72 604 76 665 80 732 84 806 88 887 92 976 96 MULTIPLIER CODES Code A Multiplier 100 B, C D, d E F G H X Y Z b 1 2 3 4 5 6 7 -1 -2 10 10 10 10 10 10 10 10 10 10-3 1. No marking for 0402 case size. 2. Marking for 0603 case size is a three character code. The code includes two characters to denote the value (based on 0603 Resistance Codes Table and a third character that denotes the value multiplier (see multiplier codes table). CODING FORMULA XX X Multiplier Code Resistance Code MARKING EXAMPLES 10 = 01X 7.5k = 85B 150k = 18D 1 Meg = 01E 3. The 0805 and 1206 case sizes parts use the standard four character marking metthod as shown in the examples below. E-24 and E-96 series - 0.5% (D), 0.25%(C), 0.1% (B) tolerances 4 DIGIT MARKING SYSTEM - First 3 digits are the significant figures, the 4th digit is the mulitplier. "R"= decimal point. Examples: 0R10 = 0.10 ohms, 1R00 = 1.0 ohms, 22R1=22.1 ohms, 3320= 332 ohms, 4751=4.75K ohms, 1132=11.3K ohms, 6493=649K ohms www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com High Power Thin Film Chip Resistors DIMENSIONS (mm) Type NTRH04 NTRH06/07 NTRH10/11 NTRH12/13 NTRH15 NTRH20 NTRH25/26 EIA Size 0402 0603 0805 1206 1210 2010 2512 L 1.00 0.05 1.55 0.10 2.0 0.15 3.05 0.10 3.10 0.15 4.90 0.15 6.30 0.15 W 0.50 0.05 0.80 0.10 1.25 0.15 1.55 0.10 2.40 0.15 2.40 0.15 3.10 0.15 H 0.30 0.05 0.45 0.10 0.55 0.10 0.55 0.10 0.55 0.10 0.55 0.10 0.55 0.10 Carrier Tape Material Width (mm) Qty per Reel (pcs) 10,000 T 0.20 0.10 0.30 0.20 0.30 0.20 0.42 0.20 0.40 0.20 0.60 0.30 0.60 0.30 NTRH Series t 0.20 0.10 0.30 0.20 0.40 0.25 0.35 0.25 0.55 0.25 0.50 0.25 0.50 0.25 TAPING SPECIFICATIONS (1) Availability Type EIA Size NTRH04 NTRH06/07 NTRH10/11 NTRH12/13 NTRH15 NTRH20 NTRH25/26 0402 0603 0805 1206 1210 2010 2512 Paper 8 Plastic 12 5,000 4,000 (2) PAPER TAPE DIMENSIONS (mm) Type EIA Size A 0.05 B 0.05 NTRH04 NTRH06/07 NTRH10/11 NTRH12/13 NTRH15 0402 0603 0805 1206 1210 0.70 1.10 1.60 2.00 2.75 1.16 1.90 2.37 3.55 3.40 D E F P0 P1 P2 W 2.0 0.05 1.55 0.05 1.75 0.05 3.50 0.05 4.0 0.10 4.0 0.05 T 0.40 0.03 0.60 0.03 2.0 0.05 8.0 0.1 0.75 0.05 1.600.10 w1 11.4 + 1.0 (0402 ~ 1206) 16.4 1.0 (2010 ~ 2512) 2 .0 0. 5 60 2 F W B T 21 0. 8 180 3 E D Cover tape 13 0.5 P0 P2 A P1 W2 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE 9.0 + 0.5 (0402 ~ 1206) 14 0.5 (2010 ~ 2512) www.SMTmagnetics.com High Power Thin Film Chip Resistors D E F P0 1.50 0.10 1.75 0.10 5.50 0.05 P1 4.0 0.05 P2 P2 W T 4.0 0.05 2.0 0.05 12.0 0.1 1.0 0.20 E (2) PLASTIC TAPE DIMENSIONS (mm) Type EIA Size A 0.10 B 0.10 NTRH20 2010 2.85 5.45 NTRH25/26 2512 3.40 6.65 NTRH Series P0 1 W D F D B 1.4 min. A T 300 PEAK REFLOW SOLDERING CONDITIONS LAND PATTERN DIMENSIONS (mm) 260C 10 Sec. 250 200 P1 1 ~ 5C/Sec. 1 ~ 5C/Sec. 150 100 Type NTRH04 NTRH06/07 NTRH10/11 NTRH12/13 NTRH15 NTRH20 NTRH25/26 EIA Size 0402 0603 0805 1206 1210 2010 2512 A 0.50 0.80 1.00 2.00 2.00 3.60 4.90 B 0.50 1.00 1.00 1.15 1.15 1.40 1.60 C 0.60 0.2 0.90 0.2 1.35 0.2 1.70 0.2 2.50 0.2 2.50 0.2 3.10 0.2 120 Sec. C 50 1 ~ 9C/Sec. 0 5 B NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com A www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com