Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FPF3003 IntelliMAXTM Full Functional Input Power Path Management Switch for Dual-Battery Portable System Features Description The FPF3003 is a single-chip solution for dual-battery power-path switching, including integrated P-channel switches and analog control features. The input voltage range operates from 2.3V to 5.5V. The device selects one of two batteries to provide power to the system, enabling one battery to be charged by the external battery charger. 2.3V to 5.5V Input Voltage Operating Range Low RON between Battery and Load Maximum 50m at VIN = 4.2V Low RON between Charger and Battery Maximum 125m at VIN = 4.2V Maximum DC Current for Load Switch: 2.5A RESET Timer Delay: 7s Typical 1.6mm X 1.6mm, 16-Bump, 0.4mm Pitch, WLCSP Maximum DC Current for Charge Switch: 1.5A Slew Rate Controlled to 30s Nominal Rise Time Seamless Break-Before-Make Transition Quiescent Current: 30A Typical Thermal Shutdown Reverse Current Blocking (RCB) between Battery A and Battery B The FPF3003 has battery voltage monitoring to determine if the battery is under voltage. Special driver and digital circuitry allows the device to switch quickly between battery A and battery B, which allows hot swapping of battery packs. Maximum current from battery to load per channel is limited to a constant 2.5A and internal thermal shutdown circuits protect the part during fault conditions. The FPF3003 is available in a 1.6mm x 1.6mm, 16-bump, Wafer-Level Chip-Scale Package (WLCSP). ESD Protected: Human Body Model: >2.5kV Charged Device Model: >1.5kV IEC 61000-4-2 Air Discharge: >15kV IEC 61000-4-2 Contact Discharge: >8kV Applications Dual-Battery Cell phone Dual-Battery Portable Equipment Ordering Information Part Number Top Mark FPF3003UCX QW (c) 2011 Fairchild Semiconductor Corporation FPF3003 * Rev. 1.0.0 (Charger-Battery) Max. RON at 4.2VIN (Battery-Load) Max. RON at 4.2VIN Typical tR Package 125m 50m 30s 16-Bump, 0.4mm Pitch, 1.6mm x 1.6mm WLCSP www.fairchildsemi.com FPF3003 -- IntelliMAXTM Full Functional Input Power Path Management Switch for Dual-Battery Portable Systems July 2012 FPF3003 -- IntelliMAXTM Full Functional Input Power Path Management Switch for Dual-Battery Portable Systems Typical Application Diagram Figure 1. Typical Application Functional Block Diagram Figure 2. Functional Block Diagram (c) 2011 Fairchild Semiconductor Corporation FPF3003 * Rev. 1.0.0 www.fairchildsemi.com 2 Figure 3. Pin Assignments (Top View) Figure 4. Pin Assignments (Bottom View) Pin Description Pin # Name Description A1 LOBAT Low Battery A Voltage Input. Connect to the resistive divider to set the trip level for chip-on moment. If LOBAT is less than 0.8V, VOUT is connected to BATB. A2 CHGIN Charging Input. Charging path input. A3, A4 BATA Supply Input. Battery A voltage input. B1 STAT Battery Selector Status. Open-drain output. HIGH (Hi-Z) means battery A connects to VOUT. LOW means battery B connects to VOUT. B2 BATBID Battery B Indicator. Connect this pin with the ID pin at the battery pack of BATB. HIGH means battery B absent; LOW means battery B present. B3,B4 VOUT Switch Output. Connect to system load. C1 ADPIN Adapter Input. 5V input for battery charger. C2 BATAID Battery A Indicator. Connect this pin with the ID pin at the battery pack of BATA. HIGH means battery A absent; LOW means battery A present. C3,C4 BATB Supply Input. Battery B voltage input. D1 GND Ground D2 RESETB Reset Input. Active LOW. Both system path switches are disconnected from system load. D3 BATSEL Battery Selection Input. HIGH means to switch battery B to VOUT; LOW means to switch battery A to VOUT. D4 CHGSEL Charge Selection Input. HIGH means to charge battery B: LOW means to charge battery A. (c) 2011 Fairchild Semiconductor Corporation FPF3003 * Rev. 1.0.0 www.fairchildsemi.com 3 FPF3003 -- IntelliMAXTM Full Functional Input Power Path Management Switch for Dual-Battery Portable Systems Pin Configuration Stresses exceeding the Absolute Maximum Ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VIN ISW PD Parameters All Pins To GND Max. Unit -0.3 6.0 V 2.5 A Maximum Continuous Switch Current to Load Maximum Continuous Switch Current to Charger 1.5 A Power Dissipation at TA = 25C 1.7 W 150 C TSTG Operating and Storage Junction Temperature JA Thermal Resistance, Junction to Ambient (1in. Square Pad of 2oz. Copper) -65 (1) 72 Human Body Model, JESD22-A114 ESD Min. Charged Device Model, JESD22-C101 Electrostatic Discharge Air Discharge (BATA, BATB, ADPIN to Capability GND), IEC61000-4-2 System Level Contact Discharge (BATA, BATB, ADPIN to GND), IEC61000-4-2 System Level C/W 2.5 1.5 kV 15.0 8.0 Note: 1. Measured using 2S2P JEDEC std. PCB. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol VIN TA Parameters Min. Max. Unit ADPIN 4.6 5.5 V BATA, BATB 2.3 5.5 V Ambient Operating Temperature -40 85 C (c) 2011 Fairchild Semiconductor Corporation FPF3003 * Rev. 1.0.0 www.fairchildsemi.com 4 FPF3003 -- IntelliMAXTM Full Functional Input Power Path Management Switch for Dual-Battery Portable Systems Absolute Maximum Ratings ADPIN=4.6 to 5.5V, VBATA=VBATB=2.3 to 5.5V, TA=-40 to 85C unless otherwise noted. Typical values are at ADPIN=5V, CHGIN=VBATA=VBATB=4.2V, RESETB=HIGH, and TA=25C. Symbol Parameters Condition Min. Typ. Max. Unit 5.5 V Static Characteristics VADPIN VADPIN_TH VBATA, VBATB IQ Adapter Input Voltage ADPIN Threshold 4.6 ADPIN Rising 4.5 ADPIN Falling 4.2 Battery Input Voltage Quiescent Current 2.3 IOUT=0mA VBATA=VBATB=5.5V, IOUT=300mA,TA=25C RON On Resistance to Charger Switch, CHGIN to BATA VIH VIL Input Logic HIGH Voltage Input Logic LOW Voltage V A 34 VBATA=VBATB=4.2V, IOUT=300mA, TA=25C 38 50 VBATA=VBATB=3.7V, IOUT=300mA,TA=25C 43 55 VBATA=VBATB=2.3V, IOUT=300mA, TA=25C(2) 62 (2) VBATA=VBATB=5.5V, ICHG=200mA, TA=25C 66 VBATA=VBATB=4.2V, ICHG=200mA, TA=25C 73 90 VBATA=VBATB=3.7V, ICHG=200mA, TA=25C 80 95 VBATA=VBATB=2.3V, ICHG=200mA, TA=25C(2) 101 (2) On Resistance to Charger Switch, CHGIN to BATB 5.5 30 (2) On Resistance to Load Switch, BATA or BATB to VOUT V m VBATA=VBATB=5.5V, ICHG=200mA, TA=25C 92 VBATA=VBATB=4.2V, ICHG=200mA, TA=25C 99 125 VBATA=VBATB=3.7V, ICHG=200mA, TA=25C 105 130 VBATA=VBATB=2.3V, ICHG=200mA, TA=25C(2) 128 VBATA=VBATB=2.3V - 5.5V, CHGSEL, BATSEL 0.90 VBATA=VBATB=2.3V - 5.5V, RESETB 1.15 VBATA=VBATB=2.3V - 5.5V, BATAID, BATBID 1.70 V VBATA=VBATB=2.3V - 5.5V, CHGSEL, BATSEL 0.6 VBATA=VBATB=2.3V - 5.5V, RESETB 0.8 VBATA=VBATB=2.3V - 5.5V, BATAID, BATBID 0.9 0.3 V VSTAT_LO STAT Logic LOW Voltage ISINK=1mA VLOBAT LOBAT Threshold VBATA=VBATB=2.3V - 5.5V 0.8 V tLOBAT LOBAT De-Glitch Time VBATA=VBATB=2.3V - 5.5V 1.3 ms Shutdown Threshold 150 Return from Shutdown 140 Hysteresis 10 TSD Thermal Shutdown Output Voltage VDROOP_OUT Droop while Battery Switching VBATA=4.2V, VBATB=4.2V, Switching from VBATA VBATB, RL=100, COUT=10F V C 100 mV Continued on the following page... (c) 2011 Fairchild Semiconductor Corporation FPF3003 * Rev. 1.0.0 www.fairchildsemi.com 5 FPF3003 -- IntelliMAXTM Full Functional Input Power Path Management Switch for Dual-Battery Portable Systems Electrical Characteristics ADPIN=4.6 to 5.5V, VBATA=VBATB=2.3 to 5.5V, TA=-40 to 85C unless otherwise noted. Typical values are at ADPIN=5V, CHGIN=VBATA=VBATB=4.2V, RESETB=HIGH, and TA=25C. Symbol Parameters Condition Min. Typ. Max. Unit Reverse Current Blocking between VBATA and VBATB VT_RCB RCB Protection Trip Point VOUT - VBATA or VBATB 20 mV VR_RCB RCB Protection Release Trip Point VBATA or VBATB -VOUT 30 mV 50 mV VBATA=VBATB=4.2V, RL=100, TA=25C, CL=10F, BATAID=HIGH to LOW, BATBID=HIGH 30 s 5 s VBATA=VBATB=4.2V, RL=100, TA=25C, CL=10f, BATAID=LOW to HIGH, BATBID=HIGH 2.5 ms 0.1 ms 2.6 ms Hysteresis Dynamic Characteristics: See Definitions Below tR VOUT Rise Time(2,3,4) tDON Turn-On Delay(2,3,4) tON tF (2,3,4) Turn-On Time (2,3,5) VOUT Fall Time (2,3,5) 35 tDOFF Turn-Off Delay tOFF Turn-Off Time(2,3,5) tDSEL Selection Delay(2,3) VBATA=VBATB=4.2V, RL=100, TA=25C, CL=10F, CHGSEL or BATSEL=LOW to HIGH 1 ms tDRST RESET Timer (2,3) Delay VBATA=VBATB=4.2V, RL=100,TA=25C, CL=10F, RESETB=Floating to LOW 7 s Notes: 2. This parameter is guaranteed by design and characterization; not production tested. 3. tDON/tDOFF/tR/tF is defined in Figure 5. 4. tON=tR + tDON. 5. tOFF=tF + tDOFF. (c) 2011 Fairchild Semiconductor Corporation FPF3003 * Rev. 1.0.0 www.fairchildsemi.com 6 FPF3003 -- IntelliMAXTM Full Functional Input Power Path Management Switch for Dual-Battery Portable Systems Electrical Characteristics FPF3003 -- IntelliMAXTM Full Functional Input Power Path Management Switch for Dual-Battery Portable Systems Timing Diagram Figure 5. ON/OFF Behavior (VBATA=4.2V) Figure 6. Battery-to-System Path Selection Behavior by BATSEL (VBATA=VBATB=4.2V) Figure 7. Charging Path Selection Behavior by CHGSEL (ADPIN=5V, CHGIN=4.2V, VBATA=VBATB=Floating with 1F) (c) 2011 Fairchild Semiconductor Corporation FPF3003 * Rev. 1.0.0 www.fairchildsemi.com 7 FPF3003 -- IntelliMAXTM Full Functional Input Power Path Management Switch for Dual-Battery Portable Systems Timing Diagrams (Continued) Figure 8. Transition from VBATA to VBATB Behavior by LOBAT (VBATA=VBATB=4.2V) Figure 9. System Reset Behavior by RESETB (VBATA=VBATB=4.2V) (c) 2011 Fairchild Semiconductor Corporation FPF3003 * Rev. 1.0.0 www.fairchildsemi.com 8 Figure 10. Figure 12. ADPIN vs. Temperature Figure 11. Supply Current vs. Supply Voltage Figure 14. Figure 13. RON (VBATA or VBATB to VOUT) vs. Supply Voltage (c) 2011 Fairchild Semiconductor Corporation FPF3003 * Rev. 1.0.0 Figure 15. Supply Current vs. Temperature RON (VBATA or VBATB to VOUT) vs. Temperature RON (CHGIN to VBATA) vs. Temperature www.fairchildsemi.com 9 FPF3003 -- IntelliMAXTM Full Functional Input Power Path Management Switch for Dual-Battery Portable Systems Typical Characteristics Figure 16. RON (CHGIN to VBATA) vs. Supply Voltage Figure 18. RON (CHGIN to VBATB) vs. Supply Voltage Figure 20. Figure 17. CHGSEL vs. ADPIN Voltage (c) 2011 Fairchild Semiconductor Corporation FPF3003 * Rev. 1.0.0 RON (CHGIN to VBATB) vs. Temperature Figure 19. CHGSEL vs. Temperature Figure 21. BATSEL vs. Temperature www.fairchildsemi.com 10 FPF3003 -- IntelliMAXTM Full Functional Input Power Path Management Switch for Dual-Battery Portable Systems Typical Characteristics Figure 22. BATSEL vs. Supply Voltage Figure 24. STAT LOW vs. Temperature Figure 26. Figure 23. Figure 25. RCB (VBATB and VOUT) vs. Temperature (c) 2011 Fairchild Semiconductor Corporation FPF3003 * Rev. 1.0.0 LOBAT vs. Temperature RCB (VBATA and VOUT) vs. Temperature Figure 27. Turn-On Response (VBATA=4.2V, COUT=10F, RL=100) www.fairchildsemi.com 11 FPF3003 -- IntelliMAXTM Full Functional Input Power Path Management Switch for Dual-Battery Portable Systems Typical Characteristics Figure 29. Battery Selection by BATSEL = HIGH LOW (VBATA=4V, VBATB=4.2V, COUT=100F, RL=100) Figure 28. Turn-Off Response (VBATA=4.2V, COUT=10F, RL=100) Figure 30. Battery Selection by BATSEL = LOW HIGH (VBATA=4V, VBATB=4.2V, COUT=10F, RL=100) Figure 31. Charge Path Selection by CHGSEL = HIGH LOW (VCHGIN=4V, VBATA=VBATB=Floating with 1F) Figure 32. Charge Path Selection by CHGSEL = HIGH Figure 33. Battery Selection by LOBAT=HIGH LOW (VCHGIN=4V, BATA=BATB=Floating with 1F) LOW (VBATA=3.8V, VBATB=4.2V, COUT=100F, RL=100) (c) 2011 Fairchild Semiconductor Corporation FPF3003 * Rev. 1.0.0 www.fairchildsemi.com 12 FPF3003 -- IntelliMAXTM Full Functional Input Power Path Management Switch for Dual-Battery Portable Systems Typical Characteristics Figure 34. System Reset by RESETB: HIGH LOW (VBATA=VBATB=4.2V, COUT=100F, RL=100) (c) 2011 Fairchild Semiconductor Corporation FPF3003 * Rev. 1.0.0 www.fairchildsemi.com 13 FPF3003 -- IntelliMAXTM Full Functional Input Power Path Management Switch for Dual-Battery Portable Systems Typical Characteristics The FPF3003 is a low-RON, P-channel-based, inputsource-selection power management switch for dualbattery systems. The FPF3003 input operating range is from 2.3V to 5.5V on BATA and BATB, while ADPIN has a range of 4.6V to 5.5V. Battery Selection The load path can be controlled by the BATSEL pin. When BATSEL is LOW, the system is powered from BATA. When BATSEL is HIGH, BATB powers the system. Figure 36 is state diagram showing how the power path from battery to system is determined. The FPF3003 controls the charging path from the charger to the battery with up to 1.5A and the discharging path from the battery to system load with up to 2.5A. The system or PMIC selects one of two batteries to provide power and enables one of the batteries to be charged by the external battery charger. Power On from ADPIN, BATA, or BATB RESETB = HIGH The FPF3003 has 30s slew-rate control to reduce inrush current when engaged and thermal shutdown protection for reliable system operation. Y Switch to the present battery Battery Presence Detection Either BATAID or BATBID = HIGH N The FPF3003 monitors whether or not a battery is present via the BATAID and BATBID pins. If any of these pins are LOW; FPF3003 recognizes the battery is present. Each pin is connected with an internal LDO output, so no pull-up resistor is required. Y N LOBAT > 0.8V During battery source transition, voltage droop depends on output capacitance and load current condition. Advanced break-before-make operation minimizes the droop with minimum capacitance. At least 10F is a good starting value in design. BATSEL = LOW Primary Battery Under-Voltage Set Switch to BATA Y N Switch to BATB Y FPF3003 monitors the primary battery of BATA for under-voltage condition. Once under-voltage condition is confirmed, the system power source changes from BATA to valid BATB automatically. Figure 36. Power Path from Battery to System The open-drain STAT pin is used to determine which battery powers the system. STAT becomes LOW if BATB is connected to the system. STAT is HIGH (HI-Z) if BATA is connected. The under-voltage threshold level can be programmed with 0.8V of LOBAT and R divider (R1 and R2) as: -1 N Both BATAID and BATBID = LOW Output Capacitor _ 0.8 VOUT Floating Y The internal circuit is powered from the highest voltage source among BATA, BATB, and ADPIN. 1 = 2 N (1) where BATA_LO = Low BATA threshold to set. If 3.4V of BATA is desired, R1/R2=3.25. If R2 is chosen 1M, R1 is 3.25M. Higher R2 is recommended to reduce leakage current from BATA. Figure 35. BATA Under-Voltage Level Setting LOBAT has a 1.3ms of deglitch time to ensure BATA is in true under-voltage rather than transient battery voltage drop during GSM transmission operation. (c) 2011 Fairchild Semiconductor Corporation FPF3003 * Rev. 1.0.0 www.fairchildsemi.com 14 FPF3003 -- IntelliMAXTM Full Functional Input Power Path Management Switch for Dual-Battery Portable Systems Operation and Application Information System RESET The charging path can be controlled by the CHGSEL pin. When CHGSEL is LOW, BATA can be charged from the charger. When CHGSEL is HIGH, BATB can be charged from the charger. The RESETB pin allows the system to be turned off without detaching the battery pack. It has typical 7s delay to avoid transient abnormal signal. Board Layout For best performance, all power traces (BATA, BATB, CHGIN, ADPIN, and VOUT) should be as short as possible to minimize the parasitic electrical effects and the case-to-ambient thermal impedance. The output capacitor should be placed close to the device to minimize parasitic trace inductance. Figure 37. Battery Charging Path (c) 2011 Fairchild Semiconductor Corporation FPF3003 * Rev. 1.0.0 www.fairchildsemi.com 15 FPF3003 -- IntelliMAXTM Full Functional Input Power Path Management Switch for Dual-Battery Portable Systems Battery Charging Path Selection 0.03 C 2X E F A B 0.40 A1 BALL A1 INDEX AREA (O0.20) Cu Pad D 0.40 (O0.30) Solder Mask Opening 0.03 C 2X RECOMMENDED LAND PATTERN (NSMD PAD TYPE) TOP VIEW 0.06 C 0.625 0.547 0.05 C C SEATING PLANE 0.3780.018 0.2080.021 E SIDE VIEWS D NOTES: A. NO JEDEC REGISTRATION APPLIES. 0.005 B. DIMENSIONS ARE IN MILLIMETERS. C A B O0.2600.02 16X 0.40 D C B A 0.40 C. DIMENSIONS AND TOLERANCE PER ASME Y14.5M, 1994. D. DATUM C IS DEFINED BY THE SPHERICAL CROWNS OF THE BALLS. (Y) 0.018 E. PACKAGE NOMINAL HEIGHT IS 586 MICRONS 39 MICRONS (547-625 MICRONS). F 1 2 3 4 (X) 0.018 F. FOR DIMENSIONS D, E, X, AND Y SEE PRODUCT DATASHEET. BOTTOM VIEW G. DRAWING FILNAME: MKT-UC016AArev2. Figure 38. 1.6mmx1.6mm WLCSP, 16-Bumps 0.4mm Pitch Product-Specific Dimensions Product D E X Y FPF3003UCX 1560m 30m 1560m 30m 180m 180m Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. (c) 2011 Fairchild Semiconductor Corporation FPF3003 * Rev. 1.0.0 www.fairchildsemi.com 16 FPF3003 -- IntelliMAXTM Full Functional Input Power Path Management Switch for Dual-Battery Portable Systems Packaging Information FPF3003 -- IntelliMAXTM Full Functional Input Power Path Management Switch for Dual-Battery Portable Systems 17 www.fairchildsemi.com (c) 2011 Fairchild Semiconductor Corporation FPF3003 * Rev. 1.0.0 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com