TNPW Vishay High Stability Thin Film Chip Resistor 0.05 % (1000 h rated power at 70 C) FEATURES * * * * Metal film layer on high quality ceramic Protective top coat Tin/lead (Pb) solder contacts Excellent overall stability at different environmental conditions 0.05 % (1000 h rated power at + 70 C) * Low temperature coefficient and tight tolerances ( 0.1 %; 10 ppm/K) APPLICATIONS TNPW Precision Thin Film Flat Chip Resistors are the perfect choice for most fields of modern electronics where reliability and stability is of major concern. Typical applications include telecommunication, industrial, medical equipment, high-end computer and audio/video electronics. * * * * Automotive Telecommunication Medical Equipment Industrial Equipment STANDARD ELECTRICAL SPECIFICATIONS Metric Size Resistance range TNPW0402 TNPW0603 TNPW0805 TNPW1206 TNPW12101) TNPW2010 TNPW25121) RR 1005M RR 1608M RR 2012M RR 3216M RR 3225M RR 5025M RR 6332M 10 to 100 k 10 to 332 k 10 to 1 M 10 to 2 M Resistance tolerance 10 to 3.01 M 10 to 4.99 M 10 to 8.87 M 1 %; 0.5 %; 0.1 % Temperature Coefficent 50 ppm/K; 25 ppm/K; 15 ppm/K; 10 ppm/K 50 ppm/K; 25 ppm/K Climatic category (LCT/UCT/days) 55/125/56 55/125/56 55/125/56 55/125/56 55/125/56 55/125/56 55/125/56 Rated dissipation, P70 2) 0.063 W 0.1 W 0.125 W 0.25 W 0.33 W 0.4 W 0.5 W Operating voltage, Umax AC/DC 50 V 75 V 150 V 200 V 200 V 300 V 300 V Maximum permissible film temperature 155 C 155 C 155 C 155 C 155 C 155 C 155 C Thermal resistance3) 870 K/W 550 K/W 440 K/W 220 K/W 170 K/W 140 K/W 110 K/W Uins 1 min 75 V 100 V 200 V 300 V 300 V 300 V 300 V continuous 75 V 75 V 75 V 75 V 75 V 75 V 75 V 0.3 x 10-9/h 0.3 x 10-9/h 0.3 x 10-9/h 0.3 x 10-9/h 0.3 x 10-9/h 0.3 x 10-9/h 0.3 x 10-9/h 0.65 g 2g 5.5 g 10 g 16 g 28 g 39 g Insulation voltage: Failure rate Weight/1000 pcs. 1) Size 2) not specified in EN 140401-801 Rated voltage P x R . The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded 3) Measuring * TNPW 0402 without marking * Extended values, tighter tolerances and temperature coefficient available on request conditions in accordance with EN 140401-801 www.vishay.com 66 For technical questions contact: ff3aresistors@vishay.com Document Number: 31006 Revision: 06-Jul-06 TNPW High Stability Thin Film Chip Resistor 0.05 % (1000 h rated power at 70 C) Vishay DIMENSIONS SIZE DIMENSIONS millimeters INCH METRIC L W H T1 T2 0402 1005 1.0 0.05 0.5 0.05 0.35 0.05 0.2 0.10 0603 1608 1.6 0.10 0.85 0.10 0.45 0.10 0.3 0.20 0805 2012 2.0 0.15 1.25 0.15 0.45 0.10 0.4 0.20 1206 3216 3.2 0.15 1.6 0.15 0.55 0.10 0.5 0.25 1210 3225 3.2 0.15 2.45 0.15 0.60 0.15 0.5 0.25 2010 5025 5.0 0.15 2.5 0.15 0.60 0.15 0.6 0.25 2512 6332 6.3 0.20 3.1 0.15 0.60 0.15 0.6 0.25 SOLDER PAD DIMENSIONS millimeters SIZE REFLOW SOLDERING WAVE SOLDERING INCH METRIC a b l a b l 0402 1005 0.4 0.6 0.5 - - - 0603 1608 0.5 0.9 1.0 0.9 0.9 1.0 0805 2012 0.7 1.3 1.2 0.9 1.3 1.3 1206 3216 0.9 1.7 2.0 1.1 1.7 2.3 1210 3225 0.9 2.5 2.0 1.1 2.5 2.3 2010 5025 1.0 2.5 3.9 1.2 2.5 3.9 2512 6332 1.0 3.2 5.2 1.2 3.2 5.2 TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE TCR 50 ppm/K TNPW0402 TOLERANCE RESISTANCE VALUE E-SERIES 1% 10R - 100K 24 -96 0.5 % 10R - 100K 0.1 % 47R - 100K 1% 10R - 100K 25 ppm/K 0.5 % 10R - 100K 15 ppm/K 0.1 % 10 ppm/K 0.1 % 50 ppm/K 0.5 % 0.1 % 1% 0.1 % TNPW0603 1% 25 ppm/K 0.5 % 0.1 % 15 ppm/K 0.1 % 10 ppm/K 0.1 % 50 ppm/K 0.5 % 1% 0.1 % TNPW0805 1% 25 ppm/K 0.5 % 0.1 % Document Number: 31006 Revision: 06-Jul-06 15 ppm/K 0.1 % 10 ppm/K 0.1 % 47R - 100K 24-192 24 -96 24-192 10R - 332K 24 -96 10R - 332K 24-192 10R - 332K 24 -96 10R - 332K 24-192 47R - 332K 10R - 1M0 24 -96 10R - 1M0 24-192 10R - 1M0 24 -96 10R - 1M0 24-192 47R - 1M0 For technical questions contact: ff3aresistors@vishay.com www.vishay.com 67 TNPW High Stability Thin Film Chip Resistor 0.05 % (1000 h rated power at 70 C) Vishay TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE TCR TOLERANCE RESISTANCE VALUE E-SERIES 1% 0.5 % 0.1 % 1% 0.5 % 0.1 % 0.1 % 0.1 % 1% 0.5 % 0.1 % 1% 0.5 % 0.1 % 0.1 % 0.1 % 1% 0.5 % 0.1 % 1% 0.5 % 0.1 % 1% 0.5 % 0.1 % 1% 0.5 % 0.1 % 10R - 2M0 24 -96 10R - 2M0 24-192 10R - 2M0 24 -96 50 ppm/K TNPW1206 25 ppm/K 15 ppm/K 10 ppm/K 50 ppm/K TNPW1210 25 ppm/K 15 ppm/K 10 ppm/K 50 ppm/K TNPW2010 25 ppm/K 50 ppm/K TNPW2512 25 ppm/K 10R - 2M0 24-192 47R - 2M0 10R - 3M01 10R - 3M01 47R - 2M13 10R - 3M01 10R - 3M01 24 -96 24-192 24 -96 24-192 47R - 2M13 10R - 4M99 10R - 4M99 47R - 1M0 10R - 4M99 10R - 4M99 47R - 1M0 10R - 8M87 10R - 8M87 47R - 1M0 10R - 8M87 10R - 8M87 47R - 1M0 24 -96 24-192 24 -96 24-192 24 -96 24-192 24 -96 24-192 PART NUMBER AND PRODUCT DESCRIPTION Products can be ordered using either the Product Description or the Part Number. For ordering TNPW with lead (Pb)-free contacts please refer to latest edition of data sheet TNPW e3. Part Number: (TIN LEAD) TNPW12061K32DETA T N MODEL TNPW 0402 TNPW 0603 TNPW 0805 TNPW 1206 TNPW 1210 TNPW 2010 TNPW 2512 P W 1 2 0 6 1 K 3 2 D E T A VALUE TOLERANCE TCR PACKING1) SPECIAL R = Decimal K = Thousand M = Million (4 digits) B = 0.1 % D = 0.5 % F = 1.0 % H = 50 ppm/K E = 25 ppm/K X = 15 ppm/K Y = 10 ppm/K TA TC TD TF TG CN TY up to 2 digits Blank = standard Historical Part Number: TNPW-1206 1.32K 0.5 % T-9 RT1(will continue to be accepted) 1) TNPW-1206 1.32K 0.5 % T-9 RT1 MODEL TNPW-0402 TNPW-0603 TNPW-0805 TNPW-1206 TNPW-1210 TNPW-2010 TNPW-2512 RESISTANCE VALUE Examples: 1K32 = 1320 99.68K = 99 680 360 = 360 TOLERANCE 0.1 % 0.5 % 1.0 % TCR T-2 = 50 ppm/K T-9 = 25 ppm/K T-10 = 15 ppm/K T-13 = 10 ppm/K PACKING1) RT1 RT6 RT7 R02 R67 R52 R75 Please refer to PACKING table www.vishay.com 68 For technical questions contact: ff3aresistors@vishay.com Document Number: 31006 Revision: 06-Jul-06 TNPW High Stability Thin Film Chip Resistor 0.05 % (1000 h rated power at 70 C) Vishay PACKING MODEL TAPE WIDTH [mm] PITCH [mm] REEL DIAMETER [mm/inch] PIECES PER REEL PACKING CODE for PRODUCT DESCRIPTION PACKING CODE for PART NUMBER TYPE OF CARRIER TAPE 8 2 180/7 10 000 RT7 TD Paper 180/7 1000 R521 CN1 Paper TNPW 0402 TNPW 0603 TNPW 0805 TNPW 1206 4 8 TNPW 1210 TNPW 0603 TNPW 0805 TNPW 1206 8 4 180/7 5000 RT1 TA Paper 8 4 330/13 20 000 RT6 TC Paper 12 4 180/7 1000 R75 TY Blister 4000 R02 TF Blister 1000 R75 TY Blister 2000 R67 TG Blister TNPW 1210 TNPW 0603 TNPW 0805 TNPW 1206 TNPW 1210 TNPW 2010 TNPW 2512 1) 12 4 180/7 R52/CN only for precision resistors with tolerance 0.1 % and temperature coefficient 25 ppm/k Production is strictly controlled and follows an extensive set of instructions established for reproducibility. A homogeneous film of metal alloy is deposited on a super high grade ceramic substrate and conditioned to achieve the desired temperature coefficient. A special laser is used to achieve the target value by smoothly cutting a meander groove in the resistive layer without damaging the ceramics. The resistors are suitable for processing on automatic SMD assembly systems. Current Noise in V/V ASSEMBLY Non-Linearity A3 in dB DESCRIPTION 120 TNPW1206 110 TNPW0805 TNPW0603 TNPW0402 100 90 3 2 1 0.5 TNPW0402 0.3 TNPW0805 TNPW1206 0.1 80 0.05 0.03 70 60 10 Non-Linearity TNPW0603 0.01 100 Document Number: 31006 Revision: 06-Jul-06 1K 10K 100K Resistance Value in 100 Current Noise 1K For technical questions contact: ff3aresistors@vishay.com 10K 100K 1M Resistance Value in www.vishay.com 69 TNPW High Stability Thin Film Chip Resistor 0.05 % (1000 h rated power at 70 C) 60 60 TNPW0603 40 20 10 0 [Z]-RO in % RO Phase Angle in Vishay 20 10 0 100 - 20 TNPW0603 40 100 1K - 20 1K - 40 - 40 4.75K 4.75K - 60 - 80 1 HF Performance 5 10 50 100 - 60 10K - 80 500 1000 1 HF Performance Frequency f in MHz 40 20 10 0 50 100 10 500 1000 Frequency f in MHz TNPW0805 40 20 10 100 1K 0 100 - 20 - 20 1K - 40 - 40 - 60 - 60 10K 1 HF Performance 5 10 50 100 500 1000 Frequency f in MHz 90 80 0402 0603 0805 10K - 80 1 HF Performance Rated Power In % - 80 Temperature Rise In C 5 60 TNPW0805 [Z]-RO in % RO Phase Angle in 60 10K 1206 70 60 50 2010 5 50 100 10 500 1000 Frequency f in MHz 120 100 80 60 40 30 2512 40 20 20 10 EN 0 0 Temperature Rise www.vishay.com 70 0.1 0.2 0.3 0.4 0.5 Power in W 0 - 55 - 25 0 25 Derating For technical questions contact: ff3aresistors@vishay.com 50 75 100 125 150 175 70 Ambient Temperature in C Document Number: 31006 Revision: 06-Jul-06 TNPW 3K 1K TNPW0603 100 10K 100K Resistance Value in TNPW0603 100 10 10R 100R 1K Single-Pulse High Voltage Overload Test 10/700 s EN140000 4.27 Power Rating P in W Power Rating P in W 10R 100R 1K Single-Pulse High Voltage Overload Test 1.2/50 s EN140000 4.27 TNPW0805 10 TNPW0603 1 0.1 10K 100K Resistance Value in 100 TNPW0805 10 TNPW0603 1 0.1 Secondary conditions: a) P > 0 (peak pulse, single pulse) b) u 70 C c) U max see diagram (Max pulse voltage) 10-5 Pulse Rating P Pulse Voltage U max in V TNPW0805 1K 100 10 0.01 Vishay 3K TNPW0805 Test Voltage in V Test Voltage in V High Stability Thin Film Chip Resistor 0.05 % (1000 h rated power at 70 C) 10-4 >0 10-3 Secondary conditions: a) P P70 (permissible constant power at u = 70 C) b) u 70 C c) U max see diagram (Max. pulse voltage) 10-2 10-1 1 10 Square Pulse ti in s 0.01 10-4 10-5 Pulse Rating P P70 10-3 10-2 10-1 1 10 Square Pulse ti in s 500 TNPW0805 300 TNPW0603 400 200 100 0 Secondary conditions: a) P see diagram (Pulse Rating) b) u 70 C 10-5 10-4 Maximum Pulse Voltage Document Number: 31006 Revision: 06-Jul-06 10-3 10-2 10-1 1 10 Square Pulse ti in s For technical questions contact: ff3aresistors@vishay.com www.vishay.com 71 TNPW High Stability Thin Film Chip Resistor 0.05 % (1000 h rated power at 70 C) Vishay TEST AND REQUIREMENTS All tests are carried out in accordance with the following specifications: EN 60115-1, Generic specification (includes tests) EN 140 400, Sectional specification (includes schedule for qualification approval) EN 140 401-801, Detail specification (includes schedule for conformance inspection) The following table contains only the most important tests. For the full test schedule refer to the documents listed above. The testing also covers most of the requirements specified by EIA/IS-703 and JIS-C-5202. The tests are carried out in accordance with IEC 60068 and under standard atmospheric conditions in accordance with IEC 60068-1, 5.3. Climatic category LCT/UCT/56 (rated temperature range: Lower Category Temperature, Upper Category Temperature; damp heat, long term, 56 days) is valid. Unless otherwise specified the following values apply: Temperature: 15 C to 35 C Relative humidity: 45 % to 75 % Air pressure: 86 kPa to 106 kPa (860 mbar to 1 060 mbar). The components are mounted for testing on boards in accordance with EN 60115-1, 4.31 unless otherwise specified. The parameters stated in the Test Procedures and Requirements table are based on the required tests and permitted limits of EN 140 401-801. However, some additional tests and a number of improvements against those minimum requirements have been included. TEST PROCEDURES AND REQUIREMENTS TEST RESULTS TNPW0402 TO TNPW2512 TEST CONDITIONS OF TEST TOLERANCES 0.1 %; 0.25 % < 100R 100R 0.5 %; 1.0 % Endurance Test at 70 C IEC 60115-1 4.25.1 1000 hours at 70 C, 1.5 hours "ON", 0.5 hours "OFF" 0.1 % 0.05 % 0.25 % Endurance at UCT IEC 60115-1 4.25.3 1000 hours at 125 C without load 0.1 % 0.05 % 0.5 % Overload Test IEC 60115-1 4.13 Short time overload for 2 seconds 2.5 x rated voltage or 2 x limiting element voltage 0.05 % 0.02 % 0.1 % Thermal Shock IEC 60115-1 4.19, IEC 60068-2-14 Rapid change between upper and lower category temperature 0.05 % 0.02 % 0.1 % Damp Heat Steady State IEC 60115-1 4.24, IEC 60068-2-3 56 days at 40 C and 93 % relative humidity 0.1 % 0.05 % 0.5 % Resistance to Soldering Heat IEC 60115-1 4.18, IEC 60068-2-20 10 seconds at 260 C solder bath temperature 0.05 % 0.02 % 0.1 % APPLICABLE SPECIFICATIONS * CECC40000/40400 * EN140400 * EIA 575 * EN 140401-801 * EN 60115-1 * IEC 60286-3 www.vishay.com 72 For technical questions contact: ff3aresistors@vishay.com Document Number: 31006 Revision: 06-Jul-06 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1