CCO 1000
TCXO
Corning Frequency Control • Worldwide Data Book 2001 v1.0.2000-11-01
Corning Frequency Control Inc. • 100 Watts Street • Mt. Holly Springs, PA 17065 • Tel 1-717-486-3411 • Fax 1-717-486-5920 • www.corningfrequency.com
Tele Quarz GmbH & Co. KG • Landstrasse • D-74924 Neckarbischofsheim, Germany • Tel +49-7268-801-0 • Fax +49-07268-801-281 • www.telequarz.de
1 / 2
Typical Applications Features
SONET / SDH High frequency
Hermetically Sealed Package
Wide Temperature Range
High Stability
Standard Frequencies 622.08 MHz Note 1
Frequency stabilities
Parameter Code I Frequency stability Operating temp range
03 ± 2.0 ppm
04 ± 1.0 ppm -20....+70°
05 ± 1.0 ppm
vs. Operating temperature range
06 ± 0.5 ppm 0....+50°C
Parameter Value Condition
vs. Supply voltage change
vs. Load change
vs. Aging / year
< ± 0.1 ppm
< ± 0.1 ppm
< ± 1.0 ppm
VS ± 5%
Load ± 5%
Frequency tuning
Parameter Option Value Condition
Mechanical (No EFC) E> ± 5.0 ppm external trimmer 22k
RF output
Parameter Code III Value Condition
Signal Sinewave
Load 02 ± 50 Ω ± 2%
Output power 0 dBm ± 3 dB @ 50 Ω
Supply voltage
Parameter Code II Value Condition
Supply voltage (VS)12 12.0 V ± 5%
Current consumption < 70 mA
CCO 1000
TCXO
Corning Frequency Control • Worldwide Data Book 2001 v1.0.2000-11-01
Corning Frequency Control Inc. • 100 Watts Street • Mt. Holly Springs, PA 17065 • Tel 1-717-486-3411 • Fax 1-717-486-5920 • www.corningfrequency.com
Tele Quarz GmbH & Co. KG • Landstrasse • D-74924 Neckarbischofsheim, Germany • Tel +49-7268-801-0 • Fax +49-07268-801-281 • www.telequarz.de
2 / 2
Additional parameters
Parameter Value Condition
Phase Noise <- 50 dBc/Hz 10 Hz Note 2
<-75 dBc/Hz 100 Hz
<-95 dBc/Hz 1kHz
<-100 dBc/Hz 10 kHz
<-105 dBc/Hz 100 kHz
<-110 dBc/Hz 1MHz
Weight < 23 g
Operable temperature range -30 ... +80°C
Storage temperature range -55 ... +105°C
Processing & Packing handling&processing note
Enclosure
Type G134
Drawing
27,2max.
17,8
15,24
19,4max.
4,5min.
ø0,8
36,1max.
25,4
17,78
0,8max.
±0,2
±0,5
±0,5
±0,2
3
2
15
4
7
6
all units in mm
Pin Connections
Pin 1trimmer,sl
Pin 2trimmer, cw
Pin 3Supply Voltage (Vs)
Pin 4I.C.
Pin 5GND, case
Pin 6GND, case
Pin 7RF output
Ordering Code Option Code I Code II Code III
Model Frequency
tuning Frequency
Stability Supply
Voltage RF
Output Frequency
Example: CC0300 E03. 12. 02. 622M08000
Order: CCO300
Notes
1other frequencies: (300 MHz to 1.3GHz) on request
2Typical values @ 622.08 MHz
Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage,
frequency control voltage, load, temperature (25°C)
Subject to technical modification; Not all options are available at all Frequencies
