123 SAL-A
www.vishay.com Vishay BCcomponents
End of Life. Last Available Purchase Date is 30-December-2015
Revision: 14-Aug-15 1Document Number: 28355
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Aluminum Capacitors
Solid Axial
Fig. 1
FEATURES
• Polarized aluminum electrolytic capacitors,
solid electrolyte MnO2
• Axial leads, aluminum case, ceramic seal, blue
insulation sleeve
• SAL-A: standard version
• SAL-AG: epoxy filled shock-proof version up to 10 000 g
• Extremely long useful life: 20 000 h at 125 °C
• Extended high temperature range up to 200 °C
• Excellent low temperature impedance and ESR behavior
• Charge and discharge proof, application with
0 resistance allowed
• Reverse DC voltage up to 0.3 x UR allowed
• AC voltage up to 0.8 x UR allowed
• Advanced technology to achieve high reliability and high
stability
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
APPLICATIONS
• EDP, telecommunication, industrial high temperature,
automotive, military and space
• Smoothing, filtering, buffering, timing
• For power supplies, DC/DC converters
MARKING
The capacitors are marked (where possible) with the
following information:
• Rated capacitance (in μF)
• Tolerance code on rated capacitance, code letter in
accordance with IEC 60062 (M = ± 20 %, K = ± 10 %)
• Rated voltage (in V) at corresponding maximum
temperature
• Date code in accordance with IEC 60062
• Name of manufacturer
• Code for factory of origin
• Band to indicate the negative terminal
• “+” sign to identify the positive terminal
•Series number
QUICK REFERENCE DATA
DESCRIPTION VALUE
Maximum case size
(Ø D x L in mm) 6.7 x 15.3 to 12.9 x 32.0
Rated capacitance range
(E6 series), CR1.0 μF to 1000 μF
Tolerance on CR± 20 %; ± 10 % on request
Rated voltage range, UR6.3 V to 40 V
Category temperature range - 55 °C to + 125 °C
Useable temperature range - 80 °C to + 200 °C
Endurance test at 155 °C
and 125 °C 5000 h and 8000 h
Useful life at 125 °C 20 000 h
Useful life at 40 °C, IR applied 450 000 h
Shelf life at 0 V, 125 °C 500 h
Based on sectional specification IEC 60384-4/EN130300
Climatic category IEC 60068 55/125/56
128
SAL-RPM
123
SAL-A Radial higher
CV/volume
Available
Available
SELECTION CHART FOR CR, UR, AND RELEVANT MAXIMUM CASE SIZES (Ø D x L in mm)
CR
(μF)
UR (V) AT Tamb = 85 °C
6.31016253540
UC (V) AT Tamb = 125 °C
6.31016252525
1.0 - - - - 6.7x 15.3 -
1.5 - - - - 6.7 x 15.3 -
2.2 - - - - 6.7 x 15.3 6.7 x 15.3
3.3 - - - - 6.7 x 15.3 6.7 x 15.3
4.7 - - - - 6.7 x 15.3 6.7 x 15.3
6.8 - - - - 6.7 x 15.3 6.7 x 15.3
10 - - 6.7 x 15.3 6.7 x 15.3 7.6 x 20.4 7.6 x 20.4
15 - - 6.7 x 15.3 6.7 x 15.3 7.6 x 20.4 7.6 x 20.4
123 SAL-A
www.vishay.com Vishay BCcomponents
End of Life. Last Available Purchase Date is 30-December-2015
Revision: 14-Aug-15 2Document Number: 28355
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in millimeters AND AVAILABLE FORMS
Fig. 2 - Forms: BA and BR
Table 1
Notes
(1) For epoxy-filled versions add 1 mm to stated Lmax..
(2) Add 10 % for SAL-AG epoxy-filled versions.
• Detailed tape dimensions see www.vishay.com/doc?28361.
22 - - 6.7 x 15.3 7.6 x 20.4 7.6 x 20.4 9.4 x 23.3
33 - 6.7 x 15.3 7.6 x 20.4 7.6 x 20.4 9.4 x 23.3 9.4 x 23.3
47 6.7 x 15.3 6.7 x 15.3 7.6 x 20.4 7.6 x 20.4 9.4 x 23.3 10.3 x 32.0
68 6.7 x 15.3 7.6 x 20.4 7.6 x 20.4 9.4 x 23.3 10.3 x 32.0 10.3 x 32.0
100 - 7.6 x 20.4 9.4 x 23.3 9.4 x 23.3 12.9 x 32.0 12.9 x 32.0
150 7.6 x 20.4 9.4 x 23.3 9.4 x 23.3 10.3 x 32.0 12.9 x 32.0 -
220 - 9.4 x 23.3 10.3 x 32.0 12.9 x 32.0 - -
330 9.4 x 23.3 10.3 x 32.0 10.3 x 32.0 - - -
470 - 10.3 x 32.0 12.9 x 32.0 - - -
680 10.3 x 32.0 12.9 x 32.0 - - - -
1000 12.9 x 32.0 12.9 x 32.0 - - - -
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
CASE Fmax. Ø d MASS (2)
(g)
PACKAGING QUANTITIES
MAXIMUM SIZE Ø D x L (1) CODE FORM BA FORM BR
6.7 x 15.3 1 20.0 0.6 1.05 100 800
7.6 x 20.4 2A 22.5 0.6 1.55 100 800
9.4 x 23.3 4 25.0 0.6 2.60 100 500
10.3 x 32.0 5 35.0 0.8 4.20 100 500
12.9 x 32.0 6 35.0 0.8 7.00 100 400
CARDBOARD BOX DIMENSIONS, L x W x H (mm)
SOLID TYPES FORM BA
6.7 x 15.3 110 x 95 x 70
7.6 x 20.4 110 x 95 x 70
9.4 x 23.3 110 x 95 x 85
10.3 x 32.0 160 x 95 x 85
12.9 x 32.0 160 x 95 x 120
SOLID TYPES FORM BR
all 370 x 370 x 115
SELECTION CHART FOR CR, UR, AND RELEVANT MAXIMUM CASE SIZES (Ø D x L in mm)
CR
(μF)
UR (V) AT Tamb = 85 °C
6.31016253540
UC (V) AT Tamb = 125 °C
6.31016252525
Ø D
Ø d
Lmax.
F
73
BA: taped in box (ammopack)
BR: taped on reel
123 SAL-A
www.vishay.com Vishay BCcomponents
End of Life. Last Available Purchase Date is 30-December-2015
Revision: 14-Aug-15 3Document Number: 28355
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Unless otherwise specified, all electrical values in Table 2 apply
at Tamb = 20 to 25 °C, P = 86 to 106 kPa, RH = 45 to 75 %.
ORDERING EXAMPLE
Electrolytic capacitors 123 series
10 μF/16 V; ± 20 %
Maximum case size: Ø 6.7 x 15.3 mm; form BR
for lead (Pb)-free:
Ordering code: MAL2 123 25109 E3
Former 12NC: 2281 123 25109
for non lead (Pb)-free:
Ordering code: MAL2 123 25109
Former 12NC: 2222 123 25109
Table 2
ELECTRICAL DATA
SYMBOL DESCRIPTION
CRRated capacitance at 100 Hz
IRMax. RMS ripple current,
no necessary DC voltage applied
IL5 Max. leakage current after 5 min at UR
tan Max. dissipation factor at 100 Hz
ESR Max./typ. equivalent series resistance at 100 Hz
Z Max. impedance at 100 kHz
ELECTRICAL DATA AND ORDERING INFORMATION for 123 series
U
C
(V)
U
R
(V)
C
R
100 Hz
(μF)
MAX.
CASE
SIZE
Ø D x L
(mm)
I
R
100 Hz
125 °C
(mA)
I
R
10 kHz
85 °C
(mA)
I
R
100 kHz
40 °C
(mA)
I
L5
5 min
(μA)
tan
100 Hz
MAX.
ESR
100 Hz
(
)
TYP.
ESR
100 Hz
(
)
Z
100 kHz
(
)
ORDERING CODE
MAL2123.....E3 LEAD (P
b
)-FREE
MAL2123 ..... NON LEAD (P
b
)-FREE
SAL-A
FORM
BA
TOL.
± 20 %
SAL-A
FORM
BR
TOL.
± 20 %
SAL-AG
(1)
FORM
BA
TOL.
± 10 %
LEVEL S
SAL-AG
(1)
FORM
BA
TOL.
± 20 %
6.3 6.3
47 6.7 x 15.3 58 440 640 15 0.18 7.6 3.0 1.2 13479 23479 83479 63479
68 6.7 x 15.3 83 520 760 21 0.18 5.3 2.6 1.2 13689 23689 83689 63689
150 7.6 x 20.4 160 870 1270 47 0.18 2.4 1.5 1.0 13151 23151 83151 63151
330 9.4 x 23.3 330 1470 2140 104 0.18 1.1 0.55 0.4 13331 23331 83331 63331
680 10.3 x 32.0 680 2340 3410 214 0.18 0.55 0.28 0.3 13681 23681 83681 63681
1000 12.9 x 32.0 940 3180 4640 315 0.18 0.36 0.19 0.2 13102 23102 83102 63102
10 10
33 6.7 x 15.3 63 360 530 17 0.18 11 3.8 1.2 14339 24339 84339 64339
47 6.7 x 15.3 83 440 640 24 0.18 7.6 4.0 1.2 14479 24479 84479 64479
68 7.6 x 20.4 110 590 850 34 0.18 5.3 2.5 1.0 14689 24689 84689 64689
100 7.6 x 20.4 160 710 1040 50 0.18 3.6 1.8 1.0 14101 24101 84101 64101
150 9.4 x 23.3 240 990 1450 75 0.18 2.4 0.9 0.4 14151 24151 84151 64151
220 9.4 x 23.3 350 1180 1720 110 0.18 1.7 0.6 0.4 14221 24221 84221 64221
330 10.3 x 32.0 490 1650 2410 165 0.18 1.1 0.45 0.3 14331 24331 84331 64331
470 10.3 x 32.0 570 1940 2830 235 0.18 0.8 0.35 0.3 14471 24471 84471 64471
680 12.9 x 32.0 760 2580 3750 340 0.18 0.55 0.25 0.2 14681 24681 84681 64681
1000 12.9 x 32.0 1000 3380 4920 500 0.18 0.36 0.18 0.2 14102 24102 84102 64102
16 16
10 6.7 x 15.3 31 230 330 16 0.14 28 8.0 2.5 15109 25109 85109 65109
15 6.7 x 15.3 47 280 400 24 0.14 19 5.5 2.5 15159 25159 85159 65159
22 6.7 x 15.3 63 340 490 35 0.14 13 5.5 2.5 15229 25229 85229 65229
33 7.6 x 20.4 89 470 680 55 0.14 8.4 3.0 2.0 15339 25339 85339 65339
47 7.6 x 20.4 120 560 810 75 0.14 5.9 2.6 2.0 15479 25479 85479 65479
68 7.6 x 20.4 180 670 970 110 0.14 4.1 2.5 2.0 15689 25689 85689 65689
100 9.4 x 23.3 260 920 1340 160 0.14 2.8 1.5 0.8 15101 25101 85101 65101
150 9.4 x 23.3 310 1060 1550 240 0.16 2.1 0.7 0.8 15151 25151 85151 65151
220 10.3 x 32.0 420 1420 2060 350 0.16 1.5 0.55 0.6 15221 25221 85221 65221
330 10.3 x 32.0 510 1740 2530 500 0.16 1.0 0.35 0.6 15331 25331 85331 65331
470 12.9 x 32.0 680 2280 3330 750 0.16 0.7 0.25 0.4 15471 25471 85471 65471
25 25
10 6.7 x 15.3 43 230 330 25 0.14 28 13.0 5 16109 26109 86109 66109
15 6.7 x 15.3 60 280 400 35 0.14 19 10.0 5.0 16159 26159 86159 66159
22 7.6 x 20.4 88 370 550 55 0.14 13 7 2.5 16229 26229 86229 66229
33 7.6 x 20.4 130 470 680 85 0.14 8.4 5 2.5 16339 26339 86339 66339
47 7.6 x 20.4 160 560 810 100 0.14 5.9 3.5 2.5 16479 26479 86479 66479
68 9.4 x 23.3 230 760 1110 170 0.14 4.1 1.8 1.0 16689 26689 86689 66689
100 9.4 x 23.3 250 860 1250 250 0.16 3.2 1.0 1.0 16101 26101 86101 66101
150 10.3 x 32.0 350 1200 1740 400 0.16 2.1 1.2 0.8 16151 26151 86151 66151
220 12.9 x 32.0 460 1560 2270 550 0.16 1.5 0.85 0.6 16221 26221 86221 66221
123 SAL-A
www.vishay.com Vishay BCcomponents
End of Life. Last Available Purchase Date is 30-December-2015
Revision: 14-Aug-15 4Document Number: 28355
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) SAL-AG types are epoxy-filled.
25 35
1.0 6.7 x 15.3 4 55 80 5 0.12 240 105 16.5 10108 20108 80108 60108
1.5 6.7 x 15.3 7 68 98 5 0.12 160 40.60 11.0 10158 20158 80158 60158
2.2 6.7 x 15.3 10 82 120 5 0.12 109 30 7.5 10228 20228 80228 60228
3.3 6.7 x 15.3 14 100 150 7 0.12 73 28 7.5 10338 20338 80338 60338
4.7 6.7 x 15.3 20 120 170 10 0.12 51 20 7.5 10478 20478 80478 60478
6.8 6.7 x 15.3 27 140 210 15 0.12 35 16 7.5 10688 20688 80688 60688
10 7.6 x 20.4 37 200 280 20 0.12 24 10 2.5 10109 20109 80109 60109
15 7.6 x 20.4 53 240 350 30 0.12 16 8 2.5 10159 20159 80159 60159
22 7.6 x 20.4 78 290 420 45 0.12 11 7 2.5 10229 20229 80229 60229
33 9.4 x 23.3 120 410 590 65 0.12 7.2 3 1.0 10339 20339 80339 60339
47 9.4 x 23.3 140 480 700 95 0.12 5.1 2.9 1.0 10479 20479 80479 60479
68 10.3 x 32.0 170 570 820 135 0.16 4.7 2.1 0.8 10689 20689 80689 60689
100 12.9 x 32.0 220 760 1100 200 0.16 3.2 1.7 0.6 10101 20101 80101 60101
150 12.9 x 32.0 290 990 1440 300 0.16 2.1 1.0 0.6 10151 20151 80151 60151
25 40
2.2 6.7 x 15.3 11 82 120 9 0.12 109 38 7.5 17228 27228 87228 67228
3.3 6.7 x 15.3 16 100 150 13 0.12 73 25 7.5 17338 27338 87338 67338
4.7 6.7 x 15.3 22 120 170 19 0.12 51 20 7.5 17478 27478 87478 67478
6.8 6.7 x 15.3 28 140 210 27 0.12 35 15 7.5 17688 27688 87688 67688
10 7.6 x 20.4 41 200 280 40 0.12 24 11 2.5 17109 27109 87109 67109
15 7.6 x 20.4 61 240 350 60 0.12 16 7 2.5 17159 27159 87159 67159
22 9.4 x 23.3 89 330 480 90 0.12 11 4 1.5 17229 27229 87229 67229
33 9.4 x 23.3 120 410 590 130 0.12 7.2 2.9 1.0 17339 27339 87339 67339
47 10.3 x 32.0 160 540 790 190 0.12 5.1 2.7 1.0 17479 27479 87479 67479
68 10.3 x 32.0 170 570 820 270 0.16 4.7 2.3 0.8 17689 27689 87689 67689
100 12.9 x 32.0 220 760 1100 400 0.16 3.2 1.6 0.6 17101 27101 87101 67101
ADDITIONAL ELECTRICAL DATA
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage Us 1.15 x UR
Reverse voltage Urev < 0.3 x UR
Maximum peak AC voltage,
reverse voltage applied 2 V
Maximum peak AC voltage,
without reverse voltage applied
Tamb 85 °C at:
f 0.1 Hz 0.30 x UR
0.1 Hz < f 1 Hz 0.45 x UR
1 Hz < f 10 Hz 0.60 x UR
10 Hz < f 50 Hz 0.65 x UR
f > 50 Hz 0.80 x UR
85 °C < Tamb 125 °C at:
f 0.1 Hz 0.15 x UR
0.1 Hz < f 1 Hz 0.22 x UR
1 Hz < f 10 Hz 0.30 x UR
10 Hz < f 50 Hz 0.32 x UR
f > 50 Hz 0.40 x UR
Current
Maximum leakage current After 5 min at UR and Tamb = 25 °C IL5 0.05 CR x UR or 2 μA, whichever is greater;
see Table 2
Typical leakage current
After 15 s at UR and Tamb = 25 °C:
UR = 6.3 V to 16 V 0.2 x value stated in Table 2
UR = 25 V to 40 V 0.1 x value stated in Table 2
ELECTRICAL DATA AND ORDERING INFORMATION for 123 series
U
C
(V)
U
R
(V)
C
R
100 Hz
(μF)
MAX.
CASE
SIZE
Ø D x L
(mm)
I
R
100 Hz
125 °C
(mA)
I
R
10 kHz
85 °C
(mA)
I
R
100 kHz
40 °C
(mA)
I
L5
5 min
(μA)
tan
100 Hz
MAX.
ESR
100 Hz
(
)
TYP.
ESR
100 Hz
(
)
Z
100 kHz
(
)
ORDERING CODE
MAL2123.....E3 LEAD (P
b
)-FREE
MAL2123 ..... NON LEAD (P
b
)-FREE
SAL-A
FORM
BA
TOL.
± 20 %
SAL-A
FORM
BR
TOL.
± 20 %
SAL-AG
(1)
FORM
BA
TOL.
± 10 %
LEVEL S
SAL-AG
(1)
FORM
BA
TOL.
± 20 %
123 SAL-A
www.vishay.com Vishay BCcomponents
End of Life. Last Available Purchase Date is 30-December-2015
Revision: 14-Aug-15 5Document Number: 28355
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VOLTAGE
Fig. 3 - Maximum permissible voltage up to 175 °C
Notes
(1) Applying the maximum RMS ripple current given in Table 2
will cause a device temperature of 138 °C.
(2) The 100 kHz values in Table 2 for other temperatures are to
be calculated with the above IR multipliers.
LEAKAGE CURRENT
Fig. 4 - Typical multiplier of leakage current as a function of
ambient temperature
Fig. 5 - Typical multiplier of leakage current as a function of U/UR
CAPACITANCE (C)
Fig. 6 - Typical multiplier of capacitance as a function of
ambient temperature
DISSIPATION FACTOR (tan )
Fig. 7 - Typical multiplier of dissipation factor as a function of
ambient temperature
U
R
(V)
- 50
Tamb (°C)
50 85 100 125 150 175
0
10
6.3
4
16
25
40
35
(1) (2)
0
(1) UC = 125 °C
(2) UC = 175 °C
RIPPLE CURRENT (IR)
PARAMETER
Tamb
25 °C 40 °C 65 °C 85 °C 105 °C 125 °C
IR multiplier 1.1 1.0 0.88 0.75 0.59 0.37
150- 50 50
10
1
100
Tamb (°C)
I
01
I
10
2
10
-1
0
I01 = leakage current during continuous operation
at UR and Tamb = 25 °C
0.8 - 0.4 0 0.4
10
1
I
02
I
10
-1
reverse voltage
U
R
U
I02 = leakage current at UR at a
discrete constant temperature
- 80 - 40 40
1.1
1.0
0.8
0.9
0
Tamb (°C)
80 120 160 200
standard deviation σ
σ
0.05
0
0
C
C
C0 = capacitance at 25 °C and 100 Hz
- 80 - 40 40
2
.
4
0
Tamb (°C)
80 120 160 200
tan δ
tan δ02.0
1.6
1.2
0.8
0.4
0
standard deviation σ
σ0.25
0
Typical tan δ at 100 Hz and Tamb = 25 °C:
0.6 x value stated in Table 2
123 SAL-A
www.vishay.com Vishay BCcomponents
End of Life. Last Available Purchase Date is 30-December-2015
Revision: 14-Aug-15 6Document Number: 28355
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IMPEDANCE (Z)
Typical impedance at 100 kHz and Tamb = 25 °C: 0.5 x value stated in Table 2.
Fig. 8 - Typical multiplier of impedance as a function of frequency at different ambient temperatures
MAXIMUM POWER DISSIPATION
MAXIMUM CASE SIZE
Ø D x L
(mm)
Pmax. = P125
(W)
6.7 x 15.3 0.13
7.6 x 20.4 0.16
9.4 x 23.3 0.21
10.3 x 32.0 0.26
12.9 x 32.0 0.32
EQUIVALENT SERIES INDUCTANCE (ESL), f = 10 MHz
MAXIMUM CASE SIZE
Ø D x L
(mm)
PITCH
(mm)
MAX. ESL
(nH)
TYP. ESL
(nH)
6.7 x 15.3 20.3 30 15 to 23
7.6 x 20.4 25.4 30 16 to 24
9.4 x 23.3 27.9 35 20 to 27
10.3 x 32.0 35.6 40 26 to 33
12.9 x 32.0 35.6 55 32 to 49
2.0
0
0.5
10 10
2 10 3 10
4 10
5 10
6 10
7
1.5
1.0
2.5
3.5
3.0
standard deviation σ (% )
1 4
7 10 10 3
f (Hz)
Z
0
Z
2
+ 175 °C 1
2
3
1
1
3
2
1
3
2
1
3
+ 85 °C
+ 25 °C
- 25 °C
- 55 °C
Curve 1: Case Ø D x L = 6.7 mm x 15.3 mm and 7.6 mm x 20.4 mm; 16 V to 40 V
Curve 2: Case Ø D x L = 6.7 mm x 15.3 mm and 7.6 mm x 20.4 mm; 6.3 V to 10 V
Curve 3: Case Ø D x L = 9.4 mm x 32.0 mm, 10.3 mm x 32.0 mm and 12.9 mm x 32.0 mm
Z0 = Initial impedance value at any frequency and Tamb = 25 °C
123 SAL-A
www.vishay.com Vishay BCcomponents
End of Life. Last Available Purchase Date is 30-December-2015
Revision: 14-Aug-15 7Document Number: 28355
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IMPEDANCE (Z)
Fig. 9 - Typical impedance as a function of frequency Fig. 10 - Typical impedance as a function of frequency
Fig. 11 - Typical impedance as a function of frequency Fig. 12 - Typical impedance as a function of frequency
Fig. 13 - Typical impedance as a function of frequency Fig. 14 - Typical impedance as a function of frequency
Z
( )
Ω
103
102
10
1
10-1
1
2
3
4
5
6
10 102 103 104 105 106 107
f (Hz)
Curve 1: 10 µF, 16 V
Curve 2: 15 µF, 16 V
Curve 3: 22 µF, 16 V
Curve 4: 33 µF, 10 V
Curve 5: 47 µF, 6.3 and 10 V
Curve 6: 68 µF, 6.3 V
Case Ø D x L = 6.7 x 15.3 mm; UR = 6.3 to 16 V
Tamb = 25 °C
Z
( )
Ω
104
103
102
10
1
10 102 103 104 105 106 107
f (Hz)
Tamb = 25 °C
1
2
3
4
5
6
Curve 1: 2.2 µF, 35 and 40 V
Curve 2: 3.3 µF, 40 V
Curve 3: 4.7 µF, 35 and 40 V
Curve 4: 6.8 µF, 35 and 40 V
Curve 5: 10 µF, 25 V
Curve 6: 15 µF, 25 V
Case Ø D x L = 6.7 x 15.3 mm;
UR = 25 to 40 V
Z
( )
Ω
103
102
10
1
10-1
10 102 103 104 105 106 107
f (Hz)
Tamb = 25 °C
1
2
3
4
5
Curve 1: 33 µF, 16 V
Curve 2: 47 µF, 16 V
Curve 3: 68 µF, 10 V
Curve 4: 100 µF, 6.3 and 10 V
Curve 5: 150 µF, 6.3 V
Case Ø D x L = 6.7 x 20.4 mm
UR = 6.3 to 16 V
Z
( )
Ω
103
102
10
1
10-1
10 102 103 104 105 106 107
f (Hz)
Tamb = 25 °C
1
2
3
4
5
6
Curve 1: 10 µF, 35 and 40 V
Curve 2: 15 µF, 35 and 40 V
Curve 3: 22 µF, 25 and 40 V
Curve 4: 33 µF, 25 V
Curve 5: 47 µF, 25 V
Curve 6: 68 µF, 16 V
Case Ø D x L = 6.7 x 20.4 mm; UR = 16 to 40 V
Z
( )
Ω
103
102
10
1
10-1
10 102 103 104 105 106 107
f (Hz)
Tamb = 25 °C
Curve 1: 22 µF, 40 V
Curve 2: 33 µF, 35 and 40 V
Curve 3: 47 µF, 35 V
Curve 4: 68 µF, 25 V
Curve 5: 100 µF, 16 and 25 V
Curve 6: 150 µF, 16 V
1
2
3
4
5
6
Case Ø D x L = 9.4 x 23.3 mm;
UR = 16 to 40 V
123 SAL-A
www.vishay.com Vishay BCcomponents
End of Life. Last Available Purchase Date is 30-December-2015
Revision: 14-Aug-15 8Document Number: 28355
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IMPEDANCE (Z)
Fig. 15 - Typical impedance as a function of frequency Fig. 16 - Typical impedance as a function of frequency
Fig. 17 - Typical impedance as a function of frequency Fig. 18 - Typical impedance as a function of frequency
EQUIVALENT SERIES RESISTANCE (ESR)
Typical ESR: see Figures 20 to 28; the standard deviation is 20 % of each value.
Fig. 19 - Typical ESR as a function of ambient temperature Fig. 20 - Typical ESR as a function of ambient temperature
102
10-2
10
1
10-1
Z
( )
Ω
10 102 103 104 105 106 107
f (Hz)
Tamb = 25 °C
Case Ø D x L = 10.3 x 32.0 mm; UR = 6.3 to 16 V
1
2
3
4
5
Curve 1: 220 µF, 16 V
Curve 2: 330 µF, 16 V
Curve 3: 330 µF, 10 V
Curve 4: 470 µF, 10 V
Curve 5: 680 µF, 6.3 V
Z
( )
Ω
103
102
10
1
10-1
10 102 103 104 105 106 107
f (Hz)
Tamb = 25 °C
Curve 1: 47 V, 40 V
Curve 2: 68 V, 35 and 40 V
Curve 3: 150 V, 25 V
1
2
3
Case Ø D x L = 10.3 x 32.0 mm;
UR = 25 to 40 V
106
105
104
103
102f (Hz) 107
Z
(Ω)
1
2
3
102
10
1
10-1
10-2
Case Ø D x L = 12.9 x 32.0 mm; U
R
= 6.3 to 10 V
Curve 1: 680 µF, 10 V
Curve 2: 1000 µF, 6.3 V
Curve 3: 1500 µF, 6.3 V
Tamb = 25 °C
106
105
104
103
102f (Hz) 107
Z
(Ω)
102
10
1
10-1
10-2
Tamb = 25 °C
1
2
3
4
5
6
Case Ø D x L = 12.9 x 32.0 mm; UR = 10 to 40V
Curve 1: 100 µF, 35 and 40 V
Curve 2: 150 µF, 35 V
Curve 3: 220 µF, 25 V
Curve 4: 470 µF, 16 V
Curve 5: 680 µF, 16 V
Curve 6: 1000 µF, 10 V
ESR
(Ω)
080- 40 120 160 200
Tamb (°C)
- 80
10
1
40
102
10-1
1
3
2
4
5
Curve 1: 10 mF, 25 V; 6.8 mF, 35 and 40 V
Curve 2: 10 mF, 16 V
Curve 3: 22 mF, 16 V
Curve 4: 33 mF, 10 V
Curve 5: 47 mF, 6.3 and 10 V; 68 mF, 6.3 V
Case Ø D x L = 6.7 x 15.3 mm ESR at 100 Hz ESR
(Ω)
080- 40 120 160 200
Tamb (°C)
- 80
10
1
40
102
10-1
Curve 1: 10 µF, 35 and 40 V
Curve 2: 33 µF, 25 V
Curve 3: 47 µF, 25 V
Curve 4: 68 µF, 10 V; 150 µF, 6.3 V
Case Ø D x L = 7.6 x 20.4 mm
1
2
3
4
5
ESR at 100 Hz
123 SAL-A
www.vishay.com Vishay BCcomponents
End of Life. Last Available Purchase Date is 30-December-2015
Revision: 14-Aug-15 9Document Number: 28355
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
EQUIVALENT SERIES RESISTANCE (ESR)
Fig. 21 - Typical ESR as a function of ambient temperature Fig. 22 - Typical ESR as a function of ambient temperature
Fig. 23 - Typical ESR as a function of ambient temperature
Fig. 24 - Typical ESR as a function of frequency
Fig. 25 - Typical ESR as a function of frequency
Fig. 26 - Typical ESR as a function of frequency
ESR
(Ω)
080- 40 120 160 200
Tamb (°C)
- 80
10
1
40
102
10-1
Curve 1: 33 µF, 35 and 40 V
Curve 2: 220 µF, 10 V; 330 µF, 6.3 V
Case Ø D x L = 9.4 x 23.3 mm
1
2
ESR at 100 Hz
ESR
(Ω)
080- 40 120 160 200
Tamb (°C)
- 80
10
1
40
102
10-1
1
2
3
4
Curve 1: 68 µF, 35 and 40 V
Curve 2: 150 µF, 25 V
Curve 3: 330 µF, 10 V
Curve 4: 470 µF, 10 V
Case Ø D x L = 10.3 x 32.0 mm
ESR at 100 Hz
ESR
(Ω)
080- 40 120 160 200
Tamb (°C)
- 80
10
1
40
102
10-1
Curve 1: 100 µF, 35 and 40 V
Curve 2: 150 µF, 35 V
Curve 3: 220 µF, 25 V
Curve 4: 470 µF, 16 V
Curve 5: 680 µF, 10 V;
1000 µF, 6.3 V
Case Ø D x L = 12.9 x 32.0 mm
ESR at 100 Hz
1
2
3
4
5
Tamb = 25 °C
10
6
10
5
10
4
10
3
10
2
10 f (Hz)
1
1
2
3
4
5
Curve 1: 10 µF, 35 and 40 V
Curve 2: 33 µF, 25 V
Curve 3: 47 µF, 25 V
Curve 4: 68 µF, 10 V; 150 µF, 6.3 V
Curve 5: 100 µF, 10 V
Case Ø D x L = 6.7 x 20.4 mm
103
102
10
1
10-1
ESR
(Ω)
103
102
10
1
10-1
ESR
(Ω)
Tamb = 25 °C
10
6
10
5
10
4
10
3
10
2
10 f (Hz)
1
Curve 1: 10 µF, 25 V; 6.8 µF, 35 and 40 V
Curve 2: 10 µF, 16 V
Curve 3: 22 µF, 16 V
Curve 4: 33 µF, 10 V
Curve 5: 47 µF, 6.3 and 10 V; 68 µF, 6.3 V
1
2
3
4
5
Case Ø D x L = 6.7 x 15.3 mm
ESR
(Ω)
102
10
1
10-1
10-2
Tamb = 25 °C
10 6
10 5
10 4
10 3
10 2
10 f (Hz)
1
Curve 1: 33 µF, 35 and 40 V
Curve 2: 220 µF, 10 V; 330 µF, 6.3 V
Case Ø D x L = 9.4 x 23.3 mm
1
2
123 SAL-A
www.vishay.com Vishay BCcomponents
End of Life. Last Available Purchase Date is 30-December-2015
Revision: 14-Aug-15 10 Document Number: 28355
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
EQUIVALENT SERIES RESISTANCE (ESR)
Fig. 27 - Typical ESR as a function of ambient temperature Fig. 28 - Typical ESR as a function of ambient temperature
Table 3
ESR
(Ω)
102
10
1
10-1
10-2
10 6
10 5
10 4
10 3
10 2
10 f (Hz)
1
1
2
3
4
Case Ø D x L = 9.4 x 23.3 mm
Curve 1: 68 µF, 35 and 40 V
Curve 2: 150 µF, 25 V
Curve 3: 330 µF, 10 V
Curve 4: 470 µF, 10 V
ESR at 100 Hz
ESR
(Ω)
102
10
1
10-1
10-2
10 6
10 5
10 4
10 3
10 2
10 f (Hz)
1
1
2
3
4
5
Case Ø D x L = 9.4 x 23.3 mm
Curve 1: 100 µF, 35 and 40 V
Curve 2: 150 µF, 35 V
Curve 3: 220 µF, 25 V
Curve 4: 470 µF, 16 V
Curve 5: 680 µF, 10 V; 1000 µF, 6.3 V
ESR at 100 Hz
TEST PROCEDURES AND REQUIREMENTS
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Endurance
IEC 60384-4/
EN130300
subclause 4.13
Tamb = 125 °C;
UR = 6.3 V to 25 V with UR applied;
UR = 35 V and 40 V with UC applied;
10 000 h
C/C: ± 10 %
tan 1.2 x spec. limit
Z 1.2 x spec. limit
IL5 spec. limit
Useful life CECC 30302
subclause 1.8.1
Tamb = 125 °C; IR applied and
UR = 6.3 V to 25 V with UR applied;
UR = 35 V and 40 V with UC applied;
20 000 h
C/C: ± 15 %
tan 1.5 x spec. limit
Z 1.5 x spec. limit
IL5 spec. limit
no short or open circuit,
no visible damage
total failure percentage: < 1 %
Shelf life
(storage at high
temperature)
IEC 60384-4/
EN130300
subclause 4.17
Tamb = 125 °C; no voltage applied;
500 h
C/C: ± 10 %
tan 1.2 x spec. limit
IL5 1 x spec. limit
Charge and
discharge
IEC 60384-4-2
subclause 9.21
106 cycles without series resistance:
0.5 s to UR;
0.5 s to ground
C/C: ± 5 %
no short or open circuit,
no visible damage
Shock IEC 60068-2-27
test Ea
Half-sine or saw tooth pulse shape; 50 g; 11 ms;
3 successive shocks in each direction of
3 mutually perpendicular axes;
no voltage applied
no intermittent contacts
no breakdown
no open circuiting
no mechanical damage
C/C: ± 5 %
tan 1.2 x spec. limit
Z 1.2 x spec. limit
IL5 1.5 x spec. limit
Severe rapid change
of temperature
100 cycles of 1 h duration, each with
30 min at - 40 °C and + 125 °C
C/C: ± 25 %
tan 1.5 x spec. limit
Z 2.0 x spec. limit
IL5 1 x spec.limit
Solvent resistance
IEC 60068-2-45,
test XA
IEC 60653
Immersion:
5 min ± 0.5 min with or without ultrasonic
at 55 °C ± 5 °C
Solvents: demineralized water and/or calgonite
solution (20 g/l)
Visual appearance not affected
Passive flammability IEC 60695-2-2
Capacitor mounted to a vertical printed-circuit
board, one flame on capacitor body;
Tamb = 20 °C to 25 °C;
test duration = 20 s
After removing the test flame from the
capacitor, the capacitor must not
continue to burn for more than 15 s;
no burning particles must drop from
the sample
123 SAL-A
www.vishay.com Vishay BCcomponents
End of Life. Last Available Purchase Date is 30-December-2015
Revision: 14-Aug-15 11 Document Number: 28355
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ADDITIONAL TESTS AND REQUIREMENTS FOR EPOXY-FILLED VERSIONS SAL-AG
2281 123 8.... Form BA ± 10 %, level S, lead (Pb)-free
2222 123 8.... Form BA ± 10 %, level S, non lead (Pb)-free
Table 4
TEST PROCEDURES AND REQUIREMENTS
TEST PROCEDURE REQUIREMENTS
Severe vibration tests in accordance with “IEC 60068-2-6” and “MIL STD-202”, method 204, letter E, with the following details and
additions
Method of mounting: Clamping both body and leads
C/C: ± 10 %
tan 1.2 x stated limit
Z 1.4 x stated limit
DC leakage current: stated limit
no intermittent contacts
no indication of breakdown
no open circuiting
no evidence of mechanical damage
Severity 1 Frequency range temperature 10 Hz to 3000 Hz;
20 °C to 25 °C
Severity 2 Frequency range temperature 50 Hz to 2000 Hz; 125 °C
Severity 1 and 2 vibration amplitude: 50 g or 3.5 mm, whichever is less
Direction and duration of motion:
Severity 1 1 octave/min; 3 directions (mutually perpendicular);
20 sweeps per direction (total 60 sweeps or 18 h)
Severity 2 1 octave/min; 2 directions (longitudinal and transversal);
3 sweeps per direction (total 6 sweeps or 1 h)
Functioning:
Severity 1 Rated voltage applied
Severity 2 No voltage applied
Typical capability > 80 g at 10 Hz to 3000 Hz (also at 125 °C)
Severe shock tests in accordance with “IEC 60068-2-27” and “MIL STD-202”, method 213, letter F, with the following details and
additions
Method of mounting Clamping both body and leads
C/C: ± 10 %
tan 1.2 x stated limit
Z 1.4 x stated limit
DC leakage current: stated limit
no intermittent contacts
no indication of breakdown
no open circuiting
no evidence of mechanical damage
Pulse shape: Half-sine or sawtooth
Severity 1 1500 g; 0.5 ms (“MIL STD-202”, method 213, letter F)
Severity 2 3000 g; 0.2 ms
Severity 3 10 000 g; 0.1 ms
Direction and number of shocks:
Severity 1 and 2 3 successive shocks in each direction of 3 mutually
perpendicular axes (total 18 shocks)
Severity 3 1 shock in any direction
Functioning Rated voltage applied
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
MAL212317101 MAL212314479 MAL212313102 MAL212363331 MAL212313331E3 MAL212313102E3
MAL212314151E3 MAL212315339E3 MAL212315689E3 MAL212315101 MAL212315331E3 MAL212316221
MAL212316331 MAL212310159E3 MAL212317339 MAL212317479 MAL212317689E3 MAL212310338E3 2281-
123-17479 2281-123-16101 MAL212366221E3 MAL212315229E3 MAL212316109 MAL212364102E3
MAL212383331 MAL212316101