PRODUCT DESCRIPTION
Flux-Off No Clean “Plus” Flux Remover is
an extra strength solvent that removes heavy
and encrusted flux deposits. This high
pressure aerosol or bulk liquid penetrates
quickly to remove all types of flux, oxide
particles, dust, grease and oil, then evaporates
quickly leaving no residues.
Powerful cleaner removes R, RA, RMA,
and No Clean fluxes
Non-corrosive, safe for metals
Flammable
Extra-strength
Fast drying
Removes encrusted, baked-on fluxes
All-Way Spray valve - even sprays upside
down
Available with BrushClea n System
TYPICAL APPLICATIONS
Flux-Off No C lean “Plus” Flux Remover
effectively cleans flux residues fr om:
Chip Carriers
Heat Sinks
Metal Housings and Cha ssis
Printed Circuit Boards
Plugs
Relays and Contacts
Sockets
Surface Mount Device Pads
Solenoids
Switches
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Flash Point
-20°F
Evaporation Rate >1
(butyl acetate=1)
Specific Gravity 0.706
Appearance Clea r, Colorless Liquid
Odor
Ethereal
Solubilit y in Water
Negligible
Kauri-Butanol
(KB) Numb er
86
Shelflife
5 years
COMPATIBILITY
Flux-Off No Clean “Plus” Flux Remover,
like any cleaner, should be tested on a non-
critical area to determine plastics
compatibility prior to use. Not recommended
for ABS, acrylics, polycarbonates,
polystyrenes and PVC.
TDS # 1696
CHEMTRONICS
Technical Data Sheet
Flux-Off
No Clean “Plus”
Flux Remover
Material
Compatibility
ABS
Non-Compatible
Buna-N
Non-Compatible
EPDM
Excellent
Graphite
Excellent
HDPE
Excellent
LDPE
Good
Lexan
Non-Compatible
Neoprene
Fair
Noryl
Non-Compatible
Nylon 66
Excellent
Cross-Linked PE
Excellent
Polypropylene
Excellent
Polystyrene
Non-Compatible
PVC
Non-Compatible
Silicone Rubber
Non-Compatible
Teflon
Excellent
Viton
Non-Compatible
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6” from surface to clean. Wash parts
from top to bottom, allowing the liquid to
flush away flux residue. Flux-Off No Clean
“Plus” can be used to remove all types of
fluxes in an ultrasonic cleaner.
AVAILABILITY
ES1696 12 oz. Aerosol
ES896B 8 oz. BrushClean System
ES196 1 Gal. Liquid
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is: 1-800-
TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC
0.0%
51%
HCFC-141b
HCFC-225
0.0%
0.0%
0.0%
0.0%
CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB
percentages shown are the content by weight.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. B (08/13)
DISTRIBUTED BY: