CHEMTRONICS Technical Data Sheet Flux-Off No Clean "Plus" TDS # 1696 Flux Remover Flash Point PRODUCT DESCRIPTION Flux-Off No Clean "Plus" Flux Remover is an extra strength solvent that removes heavy and encrusted flux deposits. This high pressure aerosol or bulk liquid penetrates quickly to remove all types of flux, oxide particles, dust, grease and oil, then evaporates quickly leaving no residues. Powerful cleaner removes R, RA, RMA, and No Clean fluxes Non-corrosive, safe for metals Flammable Extra-strength Fast drying Removes encrusted, baked-on fluxes All-Way Spray valve - even sprays upside down Available with BrushClean System TYPICAL APPLICATIONS Flux-Off No Clean "Plus" Flux Remover effectively cleans flux residues from: Chip Carriers Heat Sinks Metal Housings and Chassis Printed Circuit Boards Plugs Relays and Contacts Sockets Surface Mount Device Pads Solenoids Switches TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES -20F Evaporation Rate (butyl acetate=1) Specific Gravity Appearance >1 0.706 Clear, Colorless Liquid Odor Solubility in Water Kauri-Butanol Ethereal Negligible 86 (KB) Number Shelflife 5 years COMPATIBILITY Flux-Off No Clean "Plus" Flux Remover, like any cleaner, should be tested on a noncritical area to determine plastics compatibility prior to use. Not recommended for ABS, acrylics, polycarbonates, polystyrenes and PVC. Material ABS Buna-N EPDM Graphite HDPE LDPE Lexan Neoprene Noryl Nylon 66 Cross-Linked PE Polypropylene Polystyrene PVC Silicone Rubber Teflon Viton Compatibility Non-Compatible Non-Compatible Excellent Excellent Excellent Good Non-Compatible Fair Non-Compatible Excellent Excellent Excellent Non-Compatible Non-Compatible Non-Compatible Excellent Non-Compatible TECHNICAL & APPLICATION ASSISTANCE Chemtronics provides a technical hotline to answer your technical and application related questions. The toll free number is: 1-800TECH-401. ENVIRONMENTAL IMPACT DATA ENVIRONMENTAL IMPACT DATA CFC HCFC-141b HCFC-225 0.0% 0.0% 0.0% VOC HFC nPB 51% 0.0% 0.0% CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB percentages shown are the content by weight. NOTE: USAGE INSTRUCTIONS For industrial use only. Read MSDS carefully prior to use. Spray 4-6" from surface to clean. Wash parts from top to bottom, allowing the liquid to flush away flux residue. Flux-Off No Clean "Plus" can be used to remove all types of fluxes in an ultrasonic cleaner. AVAILABILITY ES1696 12 oz. Aerosol ES896B 8 oz. BrushClean System ES196 1 Gal. Liquid This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. CHEMTRONICS does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it. CHEMTRONICS 8125 COBB CENTER DRIVE KENNESAW, GA 30152 REV. B (08/13) 1-770-424-4888 DISTRIBUTED BY: