SIDACtor® Protection Thyristors
67
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Broadband Optimized™ Protection
MC Multiport Series - MS-013
Electrical Characteristics
MC Multiport Series MS-013 are low capacitance
SIDACtor® devices designed to protect broadband
equipment from damaging overvoltage transients.
The series provides a dual port surface mount solution
that enables equipment to comply with various global
regulatory standards while limiting the impact to
broadband signals.
1
(R
1
)
2
(G
1
)
3
(T
1
)6(T
2
)
4(R
2
)
5(G
2
)
Description
Agency Approvals
Agency Agency File Number
E133083
Schematic Symbol
Pinout Designation
Applicable Global Standards
Features and Benefits
t Low voltage overshoot
t Low on-state voltage
t Does not degrade with
use
t Fails short circuit when
surged in excess of
ratings
t Two-pair protection
t 40% lower capacitance
than our Baseband
Protectors, for
applications that
demand greater signal
integrity
t Replaces four discrete
devices
Part Number Marking
VDRM
@lDRM=5μA
VS
@100V/μs
VDRM
@lDRM=5μA
VS
@100V/μs IHISIT
VT
@IT= 2.2
Amps Capacitance
VVVV
mA min mA max A max V max
Pins 1-2, 3-2, 4-5, 6-5Pins 1-3, 4-6
P0084UCMCLxx P0084UCMC 6 25 12 50 50 800 2.2 8
See
Capaci-
tance Val-
ues Table
P0304UCMCLxx P0304UCMC 25 40 50 80 50 800 2.2 8
P0644UCMCLxx P0644UCMC 58 77 116 154 150 800 2.2 8
P0724UCMCLxx P0724UCMC 65 88 130 176 150 800 2.2 8
P0904UCMCLxx P0904UCMC 75 98 150 196 150 800 2.2 8
P1104UCMCLxx P1104UCMC 90 130 180 260 150 800 2.2 8
P1304UCMCLxx P1304UCMC 120 160 240 320 150 800 2.2 8
1
2
3
6
5
4
t TIA-968-A
t TIA-968-B
t ITU K.20/21 Enhanced
Level
t ITU K.20/21 Basic Level
t GR 1089 Inter-building
t GR 1089 Intra-building
t IEC 61000-4-5
t YD/T 1082
t YD/T 993
t YD/T 950
Notes:
- Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted).
- Devices are bi-directional (unless otherwise noted).
- XX Part Number Suffix: ‘TP’ (Tube Pack) or ‘RP’ (Reel Pack).
Table continues on next page.
SIDACtor® Protection Thyristors
68
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Broadband Optimized™ Protection
Part Number
pF
Pin 1-2 / 3-2 (4-5 / 6-5)
Tip-Ground, Ring-Ground
pF
Pin 1-3 (4-6)
Tip-Ring
MIN MAX MIN MAX
P0084UCMCLxx 35 75 20 45
P0304UCMCLxx 25 45 10 25
P0644UCMCLxx 55 85 30 50
P0724UCMCLxx 50 75 25 45
P0904UCMCLxx 45 70 25 40
P1104UCMCLxx 45 70 25 40
P1304UCMCLxx 40 60 20 35
P1504UCMCLxx 35 55 20 35
P1804UCMCLxx 35 50 15 30
P2304UCMCLxx 30 50 15 30
P2604UCMCLxx 30 45 15 30
P3104UCMCLxx 30 45 15 25
P3504UCMCLXx 25 40 15 25
Capacitance Values
Surge Ratings
Series
IPP ITSM
50/60 Hz di/dt
0.2x310 1
0.5x700 2
2x10 1
2x10 2
8x20 1
1.2x50 2
10x160 1
10x160 2
10x560 1
10x560 2
5x320 1
9x720 2
10x360 1
10x360 2
10x1000 1
10x1000 2
5x310 1
10x700 2
A min A min A min A min A min A min A min A min A min A min A/μs max
C 50 500 400 200 150 200 175 100 200 30 500
Electrical Characteristics (continued)
Part Number Marking
VDRM
@lDRM=5μA
VS
@100V/μs
VDRM
@lDRM=5μA
VS
@100V/μs IHISIT
VT
@IT= 2.2
Amps
Capacitance
VVVV
mA min mA max A max V max
Pins 1-2, 3-2, 4-5, 6-5Pins 1-3, 4-6
P1504UCMCLxx P1504UCMC 140 180 280 360 150 800 2.2 8
See
Capacitance
Values Table
P1804UCMCLxx P1804UCMC 170 220 340 440 150 800 2.2 8
P2304UCMCLxx P2304UCMC 190 260 380 520 150 800 2.2 8
P2604UCMCLxx P2604UCMC 220 300 440 600 150 800 2.2 8
P3104UCMCLxx P3104UCMC 275 350 550 700 150 800 2.2 8
P3504UCMCLxx P3504UCMC 320 400 600 800 150 800 2.2 8
Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias.
Notes:
- Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted).
- Devices are bi-directional (unless otherwise noted).
- XX Part Number Suffix: ‘TP’ (Tube Pack) or ‘RP’ (Reel Pack).
Notes:
1 Current waveform in μs
2 Voltage waveform in μs
- Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product.
- IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP$
- The device must initially be in thermal equilibrium with -40°C < TJ <¡$
SIDACtor® Protection Thyristors
69
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Broadband Optimized™ Protection
IH
IT
IS
IDRM
VDRM
VT
+V
-V
+I
-I
VS
50
100
0
t
r
t
d
0
Peak
Value
Half Value
t – Time (μs)
I
PP
– Peak Pulse Current – %I
PP
t
r
= rise time to peak value
t
d
= decay time to half value
Waveform = t
r
x t
d
V-I Characteristics tr x td Pulse Waveform
25°C
Case Temperature (T
C) - ºC
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
-40 -20 0 20 40 60 80 100 120 140 160
Ratio of IH
IH (TC = 25ºC)
Normalized VS Change vs. Junction Temperature
Normalized DC Holding Current vs. Case Temperature
Package Symbol Parameter Value Unit
Modified MS-013
1
2
3
6
5
4
TJOperating Junction Temperature Range UP °C
TSStorage Temperature Range UP °C
R0JA Thermal Resistance: Junction to Ambient 60 °C/W
Thermal Considerations
-8
-40 -20 0 20 40 60 80 100 120 140 160
-6
-4
0
2
4
6
8
10
12
14
Junction Temperature (T
J
) – °C
Percent of V
S
Change – %
25 °C
SIDACtor® Protection Thyristors
70
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Broadband Optimized™ Protection
Part Marking
Part Numbering
XXXXXXXXX
XXXXX
Part Marking Code
(Refer to Electrical Characteristics Table)
Date Code
Soldering Parameters
Physical Specifications
Environmental Specifications
Lead Material Copper Alloy
Terminal Finish 100% Matte-Tin Plated
Body Material UL recognized epoxy meeting flammability
classification 94V-0
CONSTRUCTION VARIABLE
REEL PACK
I
PP
RATING
RoHS COMPLIANT
TYPE
P = SIDACtor
P MC L RP
MEDIAN VOLTAGE
PACKAGE TYPE
xxx 4
U
C
MC Series
High Temp Voltage
Blocking
80% Rated VDRM (VAC Peak ¡$PS¡$
504 or 1008 hrs. MIL-STD-750 (Method 1040)
JEDEC, JESD22-A-101
Temp Cycling
¡$UP¡$NJOEXFMMVQUP
cycles. MIL-STD-750 (Method 1051) EIA/JEDEC,
JESD22-A104
Biased Temp &
Humidity
52 VDC¡$3)VQUPIST&*"
JEDEC, JESD22-A-101
High Temp Storage ¡$IST.*-45%.FUIPE
JEDEC, JESD22-A-101
Low Temp Storage -65°C, 1008 hrs.
Thermal Shock
¡$UP¡$NJOEXFMMTFDUSBOTGFS
10 cycles. MIL-STD-750 (Method 1056) JEDEC,
JESD22-A-106
Autoclave (Pressure
Cooker Test)
¡$3)BUNVQUPIST&*"
JEDEC, JESD22-A-102
Resistance to Solder
Heat ¡$TFDT.*-45%.FUIPE
Moisture Sensitivity
Level
3)¡$ISTSFnPXDZDMFT
¡$1FBL+&%&$+45%-FWFM
Reflow Condition Pb-Free assembly
(see Fig. 1)
Pre Heat
- Temperature Min (Ts(min))¡$
- Temperature Max (Ts(max))¡$
- Time (Min to Max) (ts)60-180 secs.
Average ramp up rate (Liquidus Temp (TL)
to peak) 3°C/sec. Max.
TS(max) to TL - Ramp-up Rate 3°C/sec. Max.
Reflow
- Temperature (TL) (Liquidus) ¡$
- Temperature (tL)60-150 secs.
Peak Temp (TP)¡$
Time within 5°C of actual Peak Temp (tp)30 secs. Max.
Ramp-down Rate 6°C/sec. Max.
Time 25°C to Peak Temp (TP)8 min. Max.
Do not exceed ¡$
Time
Temperature
T
P
T
L
T
S(max)
T
S(min)
25
t
P
t
L
t
S
time to peak temperature
(t 25ºC to peak)
Ramp-down
Ramp-up
Preheat
Critical Zone
T
L
to T
P
Figure 1
SIDACtor® Protection Thyristors
71
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Broadband Optimized™ Protection
Dimensions — MS-013
Package Type Description Quantity Added Suffix Industry Standard
U
Modified MS-013 6-pin
Tape and Reel Pack 1500 RP EIA-481-D
Modified MS-013 6-pin
Tube Pack 500 (50 per tube) TP N/A
Packing Options
Tape and Reel Specification — MS-013
7º TYP
E
D
A
B
Mold Split
Line
A
7º TYP
7º TYP
Pad Outline
0.065
(1.65)
0.460
(11.68)
0.138
(3.50) 0.059
(1.50)
C
A
F7º TYP
G
J
H
Dimension are in inches
(and millimeters).
Burr Side
MIN Length
of Flat
4º
96º
Detail A
K
BSC*
Direction of Feed
0.700
(17.8)
.512 (13.0) Arbor
Hole Dia.
12.99
(330)
.630
(16.0)
Dimensions are in inches
(and millimeters)
.472
(12.0)
.157
(4.0)
Interior of the Tube
.045
(1.14)
.165
(4.19)
.150
(3.81)
90˚
.525
(13.34)
A
.225
(5.72)
Message Location
.310
(7.87) .108
(2.74) .005
20.000 ± .030
(508.00 ± 0.76)
.020 ± .005
(0.51 ± 0.13) WALL TYP.
.110
(2.79)
A
6
Dimensions are in inches
(and millimeters)
Tube Pack Dimensions — MS-013
Dimensions Inches Millimeters
Min Max Min Max
A0.360 0.364 9.14 9.25
B0.352 0.356 8.94 9.04
C0.400 0.412 10.16 10.46
D0.043 0.045 1.09 1.13
E0.047 0.055 1.19 1.40
F0.293 0.297 7.44 7.54
G0.289 0.293 7.34 7.44
H0.089 0.093 2.26 2.36
J0.041 0.049 1.04 1.24
K0.020 0.51
BSC* 0.133 0.143 3.38 3.63
* BSC = Basic Spacing between Centers
