CLL YT aT) eee a z y) yy | Insulation Material: This refers to the colour and general specification, which governs both the operational temperatures* and flammability rating. The following table lists the material, maximum temperature and flammability rating options for the components listed: b ao"C V2 H0c V2 125C V2 125C V0 10C V2 7oecs* V2 Nylon 6 natural Nylon 6 natural Nylon 6 black Nylon 6 white Nylon 6 grey Nylon 6.6 natural en noe ant | mee 7 Nylon 6.6 natural T10RC V2 3 Hylon 6.6 natural 125C V2 Nylon 6.6 white 1O0C V2 10 Nylon 6.6 black Titec V2 if Glass-filled Nylon 6.6 brown 150C VO *Note: The same material will achieve different maximum temperatures, depending on the test requirements of the component. This maximum temperature is due ta the temperature limitation of the in-line fuse used. Flammability: A measurement of a material's ability to resist burning (Flame Retardation). Plastic materials are commonly classified in accordance with the American (Underwriters Laboratories Inc.) test for fire resistance UL94 and are given the classification codes V0, V1, V2 or HB, however V1 and HB coded materials are not listed in this publication. LK) V0is the most demanding classification, not permitting a flame to continue for 10 seconds or more, after the material has been set aflame and the bumer removed in the prescribed manner. L) V2 classified materials are subjected to the same test but flaming must not continue for 30 seconds, or more. There are other tests applied to materials to obtain these classifications. Here again, the VO requirement is the more demanding. Poles: This refers to the number of individual contact ways per terminal block. Current & Voltage Rating: These are stated in accordance with the latest EN60998 standard. If product is required to be compliant to a different standard, please enquire. Nominal Cable Size: This is the nominal maximum square mm conductor size that will fit in the terminal. Approvals: The following approvals have been obtained for products listed in this catalaque: O) A=IMQ, B=VDE, C=UL (Listed or Recognised), D=CSA, E= cURus, F=DEMKO, G=KEMA, H= NEMKO, I=ENEC. Pillar Terminals: The common name for terminal strips with pillar or chimney shaped finger protection, situated above the terminal screws. A fixing hole is located between each pole. Cutting to the required number of poles is done at this point. Note: All the standard pillar terminal blacks are moulded as a 12 pole but most can also be supplied pre-cut to customers individual requirements. e.g. 3 pole or 6 pole. Please enquire for Catalogue No. price and availability. The following features are all associated with pillar terminals: Terminal Inserts All our inserts are manufactured in nickel-plated brass. The following options are available, depending on the terminal block style (see the main bocly of the cataloque for availability). Through hole This is the type most commonly used. Care must be exercised when terminating in these inserts since conductors can be inserted too far, interfering with connections on the opposite side. Solid Barrier This type of insert has a blind hole to prevent over insertion of the conductor which can ensure a more reliable connection on beth sides. Wire Protectors: These are made of Stainless Steel and are designed to interface between the terminal screws and the conductors ta minimise the possibility of cable damage. Their usefulness depends on the cable types used, the cable preparation and/or the types of application. They are available in through wire and barrier wire protected versions. ~ : Straight Solid Through Barrier iam Detects Barrier sacar | Wire Cw] | Wire Protection bere Protection Terminal Screws: All screws are manufactured in zinc passivated stee!. They are captive and supplied in the raised position reacy for use. Terminal Bases: Available in three basic versions: L Low Base (LB) Usually specified when mounting on insulated surfaces and/or where height is restricted. L Standard Enclosed Base (SEB}- Usually designed to comply with the relevant European Norms for creepage and clearance distances, L] Raised Open Base (ROB) Extra high base usually required to meet particularly stringent creepage and clearance requirements in certain applications. 1 | Standard KZa] I ; Low Base 7 close i) et Enclosed Base | EE Raised { Open Base Standard Nylon Pillar Style Terminal Blocks This range has been specially selected to provide for a wide variety of customer applications. Most products carry European and North American approval, copies ofwhichareavailable an request. L) Termination options (wite protection, barrier) L Versions available for high temperature applications L] Cutting service available, please ask for details L Individual Data Sheets available on request. ar Tate Firs. pie a s crt ita eon apne ccs nacre see ATT a ua ty ita ne et] fiat PASS 1A 450V 29 MG 6, 1] ABCDEI a 26 no no SEB 500 PASSWP 17.54 450 24 MB 8, II ABCDEFI" a 26 ye no SEB 500 1013430012 244 450V 0 MG 2,4 BCDF| a 2.8 no na ROG S00 1013432012 244 450V 5.0 Ma 2,4 BCOF| 8 2.8 yes no ROB 500 PART a2 Asi a2 NB 6 1] ABCDEI 10 a2 no no SEB S00 PAZT WP 244 450V 2 AG 6,11 ABCDET 10 32 yes no SEB 400 1013500012 32 400V 5.6 Ma 2,4,1] BCDFG 10 36 no m0 SEB S00 1013503012 324 450V 5.6 Ma 24,11 BCDFG 10 34 yes yes SEB 500 1013530012 32 450 3.6 AB 2,4 BCOFG 10 34 no no ROE 500 1013533012 S24 450V 5.6 MG 2,4 BCDFG 10 35 yes yes ROG 500 1019534012 324 450V 5.6 MG 24 BCDFG 10 35 no yes ROB 500 PAd4 41a Foy 40) AGS Fl ABCDET 2 a2 no no SEB 200 PAP a2 ASO 40 NGS 7) ABCDEI 12 a yes no SEB 200 1013900012 4A 7SOV 4] MGS 24,11 BCOF| 12 3.6 no no SEB 200 JOS 902012 4 ASV 4] NG.5 24,11 BCOF| 12 3.6 yes no SEB 200 4-832F-]-4-12 a2 450 40 N35 9 B 1s 4.0 no no SEB 200 PATS STi FOV 5.0 Md 6, 11 ABCDE 15 4a no no SEB 200 PATOWP 414 FSOV 5.0 id 6,11 ABCDE 15 4a yes no SEB 200 PATAFVOT? 57h PSO 4.0 MA ll ABCDE 15 Al no yes SEB 200 1023900012 Sy AS 48 Md 24 BCD 13:5 43 no no SEB 100 1023903012 STi ASOV 45 MA 24 BCD 13.5 43 yes yes SEB 100 PAZ?O F FS I] MS 7) ABCDE 15 45 no no SEB 100 JOS 800012 F ASV 43 MS 24,1] BCODI 144 43 no no LE 100 1013802012 76 7SOV 6.3 M5 24,11 AcDI 145 43 yes yes LB 100 1013850012 7G 75OV 63 M5 24,1] AcDI 14.5 43 no no SEB 100 1013852012 F FSV 43 MS 24,11 BCODI 145 4a yes yes SEB 100 *ENEC approved, except version with insulation material 17 (glass filled nylon 6.6 brawn) Dimensions 12 Pole Strips f | [| a i Base Reference No. 1 ct ti ati l | 4 | | _| ) ma wes PA35/FA3 S/F 93.5 15 15.2 lol Ol | Ol ol 101343.12 94 161 WI = [Sd Wh} IS PA27/PADTWP WW 20 17.8 je a 1O1350...12. Wr 10 155 101353....12 7 20 185 a EUAN ms] is | 5 oO oo 102390..12 157.5 2 wy = = : PA220FV 175.20 320 22 . 101380..12 WW 30 4 RBS 101385..12 7 30 7 < : Ifyou cannot tind what you ar looking for, please ask. See glossary for explanation of terms used in this cataloque. fi