Bulletin PD-21034 rev. A 07/06 32CTQ030SPbF 32CTQ030-1PbF 32 Amp SCHOTTKY RECTIFIER IF(AV) = 30Amp VR = 30V Major Ratings and Characteristics Characteristics Description/ Features Values Units 30 A VRRM 30 V IFSM @ tp = 5 s sine 900 A VF @ 15 Apk, TJ = 125C 0.40 V TJ range - 55 to 150 C IF(AV) Rectangular waveform The 32CTQ030.. Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150 C TJ operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free ("PbF" suffix) Case Styles 32CTQ030SPbF 32CTQ030-1PbF Base Common Cathode Base Common Cathode 2 1 Anode 2 Common Cathode D2PAK www.irf.com 2 3 Anode 1 Anode 2 Common Cathode 3 Anode TO-262 1 32CTQ030SPbF, 32CTQ030-1PbF Bulletin PD-21034 rev. A 07/06 Voltage Ratings Part number VR 32CTQ030SPbF, 32CTQ030-1PbF Max. DC Reverse Voltage (V) 30 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters 32CTQ Units Conditions IF(AV) Max. Average Forward Current * See Fig. 5 30 A Max. Peak One Cycle Non-Repetitive 900 Surge Current * See Fig. 7 250 EAS Non-Repetitive Avalanche Energy 13 mJ IAR Repetitive Avalanche Current 3 A IFSM A 50% duty cycle @ TC = 115 C, rectangular wave form 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied TJ = 25 C, IAS = 1.20 Amps, L = 11.10 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM 32CTQ Units Conditions Max. Forward Voltage Drop (1) * See Fig. 1 V @ 15A 0.58 V @ 30A 0.40 V @ 15A 0.53 V @ 30A 1.75 mA TJ = 25 C * See Fig. 2 97 mA TJ = 125 C VF(TO) Threshold Voltage 0.233 V TJ = TJ max. m IRM Max. Reverse Leakage Current (1) 0.49 rt Forward Slope Resistance 9.09 CT Max. Junction Capacitance Per Leg 1300 pF LS Typical Series Inductance 8.0 nH 10000 V/ s Per Leg dv/dt Max. Voltage Rate of Change TJ = 25 C TJ = 125 C VR = rated VR VR = 5VDC (test signal range 100Khz to 1Mhz) 25 C Measured lead to lead 5mm from package body (Rated VR ) (1) Pulse Width < 300s, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters 32CTQ Units Conditions TJ Max. Junction Temperature Range - 55 to 150 Tstg Max. Storage Temperature Range C - 55 to 150 C RthJC Max. Thermal Resistance Junction to Case Per Leg 3.25 C/W DC operation RthCS Typical Thermal Resistance, 0.50 C/W Mounting surface , smooth and greased * See Fig. 4 Case to Heatsink wt Approximate Weight T Mounting Torque Marking Device 2 2 (0.07) g (oz.) Min. 6 (5) Max. 12 (10) Kg-cm (Ibf-in) 32CTQ030S Case style D2Pak 32CTQ030-1 Case style TO-262 www.irf.com 32CTQ030SPbF, 32CTQ030-1PbF Bulletin PD-21034 rev. A 07/06 Reverse Current - I R (mA) 1000 100 TJ = 150C 100 125C 10 100C 1 75C 50C 0.1 25C 0.01 0.001 0 5 10 15 20 25 30 Reverse Voltage - VR (V) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage 10000 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 1000 10 TJ= 150C TJ= 125C TJ= 25C 1 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 TJ = 25C 1000 100 0 5 10 15 20 25 30 35 Reverse Voltage - VR (V) Forward Voltage Drop - V FM (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Thermal Impedanc e Z thJC (C/W) 10 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM 0.1 t1 0.01 Notes: Single Pulse (Thermal Resistanc e) t2 1. Duty factor D = t 1 / t 2 2. Peak TJ = PDM x Z thJC+ TC 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 t 1 , Rec tangular Pulse Dura tion (Sec onds) Fig. 4 - Maximum Thermal Impedance Z thJC Characteristics www.irf.com 3 32CTQ030SPbF, 32CTQ030-1PbF Bulletin PD-21034 rev. A 07/06 10 150 Average Power Loss - (Watts) Allowable Case Temperature - (C) 160 140 DC 130 120 Sq uare wa ve (D = 0.50) 80% Rated V R a pplied 110 100 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 8 RMSLimit 6 DC 4 2 90 see note (2) 0 80 0 5 10 15 20 0 25 Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Non-Repetitive Surge Current - I FSM (A) 5 10 15 20 25 Average Forward Current - I F(AV) (A) Fig. 6 - Forward Power Loss Characteristics 1000 At Any Rated Load Condition And With Rated VRRM Applied Following Surge 100 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Maximum Non-Repetitive Surge Current L IRFP460 DUT Rg = 25 ohm CURRENT MONITOR HIGH-SPEED SWITCH FREE-WHEEL DIODE + Vd = 25 Volt 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x V FM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = V R1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 32CTQ030SPbF, 32CTQ030-1PbF Bulletin PD-21034 rev. A 07/06 Outlines Table Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) Modified JEDEC outline TO-262 Dimensions in millimeters and (inches) www.irf.com 5 32CTQ030SPbF, 32CTQ030-1PbF Bulletin PD-21034 rev. A 07/06 Part Marking Information D2PAK THIS IS A 32CTQ030S LOT CODE 8024 ASSEMBLED ON WW 02, 2000 INTERNATIONAL RECTIFIER LOGO PART NUMBER 32CTQ030S DATE CODE ASSEMBLY LOT CODE TO-262 EXAMPLE: THIS IS A 32CTQ030-1 LOT CODE 1789 ASSEMBLED ON WW 19, 2002 INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE YEAR 0 = 2000 WEEK 02 P = LEAD-FREE PART NUMBER DATE CODE YEAR 2 = 2002 WEEK 19 P = LEAD-FREE Tape & Reel Information Dimensions in millimeters and (inches) 6 www.irf.com 32CTQ030SPbF, 32CTQ030-1PbF Bulletin PD-21034 rev. A 07/06 Ordering Information Table Device Code 32 C T Q 030 S 1 2 3 4 5 6 1 - Current Rating (30A) 2 - Circuit Configuration 3 - T = TO-220 4 - Schottky "Q" Series 5 - Voltage Rating (030 = 30V) 6 - y S = D 2Pak TRL PbF 7 8 C = Common Cathode y -1= TO-262 7 - y none = Tube (50 pieces) y TRL = Tape & Reel (Left Oriented - for D2Pak only) y TRR = Tape & Reel (Right Oriented - for D2Pak only) 8 - y none = Standard Production y PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 07/06 www.irf.com 7