All specifications are typical at nominal input, full load at 25°C unless otherwise stated
Cin = 560µF, Cout = 0µF
DC/DC CONVERTERS POLA Non-isolated 1
NEW Product
File Name: pth12030.pdf Rev: 11 Feb 2004
International Safety Standard Approvals (pending)
UL/cUL CAN/CSA 22.2 No. (TBD)
UL 60950 File No. (TBD)
TÜV TÜV Product Service (EN60950)
Certificate No. (TBD). CB report and certificate to IEC60950
TÜV
The PTH12030 is a next generation series of non-isolated DC/DC converters offering
some of the most advanced POL features available in the industry. The primary new
feature provides for sequencing between multiple modules, a function, which is
becoming a necessity for powering advanced silicon including DSP’s, FPGA’s and
ASIC’s requiring controlled power-up and power-down Other industry leading features
include margin up/down controls and efficiencies up to 94.5%. The PTH12030 has an
input voltage of 10.2V - 13.8V and offers a wide 1.2V - 5.5V output voltage range with
up to 26A output current, which allows for maximum design flexibility and a pathway
for future upgrades.
•26A output current
•12V input voltage
•Wide-output voltage adjust (1.2V to 5.5V)
•Auto-track™ sequencing*
•Margin up/down controls
•Efficiencies up 94.5%
•Output ON/OFF inhibit
•Output voltage sense
•Point-of-Load-Alliance (POLA) compatible
*Auto-track™ is a trade mark of
Texas Instruments
2 YEAR WARRANTY
OUTPUT SPECIFICATIONS
Voltage adjustability (See Note 4) 1.2V to 5.5V
Setpoint accuracy ±2.0% Vo
Line regulation ±5mV typ.
Load regulation ±5mV typ.
Total regulation ±3.0% Vo
Minimum load 0A
Ripple and noise 20MHz bandwidth 25mV < 2.5V.
Vo> 2.5V, 1.0% typ.
Temperature co-efficient -40ºC to +85ºC ±0.5% Vo
Transient response 50µs recovery time
(See Note 5) Overshoot/undershoot 150mV
Margin adjustment ±5.0% Vo
INPUT SPECIFICATIONS
Input voltage range (See Note 3) 10.2V to 13.8V
Input current No load 10mA typ.
Remote ON/OFF (See Note 1) Active high
Start-up time 1V/ms
Undervoltage lockout 8.5V to 9.5V typ.
Track input voltage Pin 11 (See Note 6, 7) ±0.3Vin
EMC CHARACTERISTICS
Electrostatic discharge EN61000-4-2, IEC801-2
Conducted immunity EN61000-4-6
Radiated immunity EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency (See Efficiency Table) 94% max.
Insulation voltage Non-isolated
Switching frequency 500kHz
Approvals and EN60950
standards (pending) UL/cUL60950
Material flammability UL94V-0
Dimensions (L x W x H) 34.80 x 28.45 x 9.00mm
1.370 x 1.120 x 0.354in
Weight 5g (0.18oz)
MTBF Telcordia SR-332 TBD hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient, -40ºC to +85ºC
(See Note 2) temperature
Non-operating -40ºC to +125ºC
PROTECTION
Short-circuit protection Auto reset 40A typ.
Thermal protection Auto recovery
PTH12030
12Vin single output
SPECIFICATIONS
File Name: pth12030.pdf Rev: 11 Feb 2004
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
DC/DC CONVERTERS POLA Non-isolated 2
NEW Product
Notes
1Remote ON/OFF. Active High
ON: Pin 4 open; or V > Vin - 0.5V
OFF: Pin 4 GND; or V < 0.8V (min - 0.2V).
2See Figure 1 for safe operating curve.
3A 560µF electrolytic input capacitor is required for proper operation. The
capacitor must be rated for a minimum of 500 mArms of ripple current.
4An external output capacitor is not required for basic operation. Adding
330µF of distributed capacitance at the load will improve the transient
response.
51 A/µs load step, 50 to 100% Iomax, Cout = 330µF.
6If utilized Vout will track applied voltage by ±0.3V (up to Vo set point).
7The pre-bias start-up feature is not compatible with Auto-
Track™. This is because when the module is under Auto-Track™
control, it is fully active and will sink current if the output voltage
is below that of a back-feeding source. Therefore to ensure a
pre-bias hold-off, one of the following two techniques must be
followed when input power is first applied to the module. The
Auto-Track™function must either be disabled, or the module’s
output held off using the Inhibit pin. Refer to Application Note
162 for more details.
OUTPUT INPUT OUTPUT OUTPUT OUTPUT EFFICIENCY REGULATION MODEL
POWER VOLTAGE VOLTAGE CURRENT CURRENT (MAX.) LINE LOAD NUMBER
(MAX.) (MIN.) (MAX.)
143W 10.2V - 13.8V 1.2V - 5.5V 0A 26A 94.5% ±5mV ±5mV PTH12030
PTH12030WAHT
Part Number System with Options
Product Family
Point of Load Alliance
Compatible
The ultra-wide output voltage trim range offers major advantages to users who
select the PTH12030. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 1.2V to 5.5V. When the PTH12030 converter leaves the
factory the output has been adjusted to the default voltage of 1.2V
Output Voltage Adjustment of the PTH12030 Series
Output Current
03 = 26A
Input Voltage
12 = 12V
Mechanical Package
Always 0
EFFICIENCY TABLE (IO= 18A)
OUTPUT VOLTAGE EFFICIENCY
Vo = 1.2V 86.2%
Vo = 1.5V 88.2%
Vo = 1.8V 89.5%
Vo = 2.0V 90.3%
Vo = 2.5V 91.4%
Vo = 3.3V 92.7%
Vo = 5.0V 94.5%
PTH12030
12Vin single output
Mounting Option
V = Vertical Through-Hole
H = Horizontal Through-Hole
S = Surface-Mount
Packaging Options
No Suffix = Trays
T = Tape and Reel
Pin Option
A= Through-Hole Std. Pin Length (0.140”)
A = Surface-Mount Tin/Lead Solder Ball
Output Voltage Code
W = Wide
File Name: pth12030.pdf Rev: 11 Feb 2004
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
DC/DC CONVERTERS POLA Non-isolated 3
NEW Product
PTH12030
12Vin single output
024681012
20
30
40
50
60
80
Nat conv
100 LFM
200 LFM
400 LFM
14
90
70
16 18 20 22 24 26
TEMPERATURE (ºC)
OUTPUT CURRENT (A)
024 810 16
60
70
80
90
100
EFFICIENCY (%)
OUTPUT CURRENT (A)
1.2V
1.8V
2.5V
50
40
2014
3.3V
5.0V
61218222426
Vout
Figure 1 - Safe Operating Area
Vin = 12V, Output Voltage = 3.3V (See Note A)
Figure 2 - Efficiency vs Load Current
Vin = 12V (See Note B)
Notes
ASOA curves represent the conditions at which internal components are
within the Artesyn de-rating guidelines.
BCharacteristic data has been developed from actual products tested at
25°C. This data is considered typical data for the converter.
111213
PTH12030
(Top View)
2
1
3
654
8
10
7
9
Track
Margin Up
Margin Down
Vin
GND
Inhibit
Cin 560µF
(Required) RSET 0.5%, 0.1W
(Required)
L
O
A
D
Vout
Vo Sense
Cout 330µF
(Optional)
GND
+
+
Figure 3 - Standard Application
File Name: pth12030.pdf Rev: 11 Feb 2004
Please consult our website for the following items: ✔ Application Note www.artesyn.com
Data Sheet © Artesyn Technologies
®
2004
The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent
accompany the sale of any such product(s) or information contained herein.
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
DC/DC CONVERTERS POLA Non-isolated 4
NEW Product
PTH12030
12Vin single output
0.140
(3.55)
max.
0.354 (9.00)
Host Board
TOP VIEW
SIDE VIEW
1.370 (34.80)
1.120
3
2
1
65
4
12
13 11
7
8
9
10
ø
0.040 (1.02)
13 Places
(28.45)
0.125 (3.18)
0.500 0.500
(12.70) (12.70)
0.125 (3.18)
(1.52)
0.060 (1.52)
0.060
(9.52)
0.375
(3.18)
0.125
(12.70)
0.500
(9.52)
0.375
(9.52)
0.375
0.125 (3.18)
Dimensions in Inches (mm)
Tolerances (unless otherwise specified)
2 Places ±0.030 (±0.76)
3 Places ±0.010 (±0.25)
(0.070 (1.78)
(Standoff Shoulder)
Lowest Component
0.010 min. (0.25)
Bottom side Clearance
TOP VIEW SIDE VIEW
1.370 (34.80)
1.120
3
2
1
65
4
12
13 11
7
8
9
10
(28.45)
0.125 (3.18)
(12.70)
0.500
0.125 (3.18)
0.500
(12.70)
0.060
(1.52)
0.060
(1.52)
0.125 (3.18)
0.375
(9.52)
0.500
(12.70)
(9.52)
0.375
0.375
(9.52)
0.125 (3.18)
Dimensions in Inches (mm)
Tolerances (unless otherwise specified)
2 Places ±0.030 (±0.76)
3 Places ±0.010 (±0.25)
0.354 (9.00)
max.* *After solder reflow
on customer board
Solder Ball
ø
0.040 (1.02)
13 Places
Figure 4 - Plated Through-Hole Mechanical Drawing
Figure 5 - Surface-Mount Mechanical Drawing
*Denotes negative logic:
Open = Normal operation
Ground = Function active
PIN CONNECTIONS
PIN NO. FUNCTION
1Ground
2Vin
3Ground
4Inhibit*
5Vo adjust
6Vo sense
7Ground
8Vout
9Vout
10 Ground
11 Track
12 Margin down
13 Margin up
