1 J403.A (1/05)
US 619 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Taiwan 886 2 2698 0228
••
Hong Kong 852 2788 6588
••
http://www.pulseeng.com
Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C
Insertion Return Loss Common Mode
Part Turns1,2 EMI6LEDs 3Loss (dB TYP) Crosstalk Rejection Hipot
Number Ratios Fingers (L/R) (dB TYP) 100 Ω±15 Ω(dB TYP) (dB TYP) (Vrms)
TX RX 1-65 MHz 1-10 MHz 10-30 MHz 30-60 MHz 60-80 MHz 1-30 MHz 30-60 MHz 60-100 MHz 1-50 MHz 50-150 MHz @60Hz 1 MIN
J0006D01B 1CT:1 1CT:1 No G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0006D21 1CT:1 1CT:1 YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0006D21B 1CT:1 1CT:1 YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0011D01 1CT:1 1CT:1 No N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0011D01B 1CT:1 1CT:1 No G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0011D21 1CT:1 1CT:1 YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0011D21B 1CT:1 1CT:1 YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0011D21E 1CT:1 1CT:1 YES G/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0012D21 1CT:1 1CT:1 YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0018D21 1CT:1.414 1CT:1 YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0018D21E 1CT:1.414 1CT:1 YES G/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0024D21 1CT:2 1CT:1 YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0024D21B 1CT:2 1CT:1 YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0026D01 1CT:1 1CT:1 No N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0026D01B 1CT:1 1CT:1 No G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0026D01E 1CT:1 1CT:1 No G/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0026D01F
4
1CT:1 1CT:1 No Y/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0026D21 1CT:1 1CT:1 YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0026D21B 1CT:1 1CT:1 YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0026D21E 1CT:1 1CT:1 YES G/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0026D21F
4
1CT:1 1CT:1 YES Y/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0026D21G
5
1CT:1 1CT:1 YES YG/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0033D21 1.25CT:1 1CT:1 YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0035D21B 1CT:1 1CT:1 YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0048D21M 1CT:1 1CT:1 YES G/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J0073D01B 1CT:2.5 1CT:1 No G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
PULSEJACKTM
1x1 Tab-DOWN RJ45
www.pulseeng.com
Features and Benefits:
RoHS “NL” peak solder rating 260°C, non-RoHS peak solder rating 235°C
Available with or without LEDs
Suitable for CAT 5 & 6 Fast Ethernet Cable or better UTP
For RoHS part, add suffix NL7
Electrical Performance Summary:
Internal magnetics options availab le
Meets or exceeds IEEE 802.3 standard for 100Base-T
350 µH minimum OCL with 8 mA bias current
Minimum 1500 Vrms isolation per IEEE 802.3 requirement
Description:
10/100 Base-TX RJ45 1x1 Tab-DOWN with LEDs 8-pin (J0 series) integrated magnetics connector (ICM), designed to
support applications, such as SOHO (ADSL modems), LAN-on-Motherboard (LOM), Hub and Switches.
Notes: 1. Both transmit and receive channels meet IEEE 802.3 specifications.
2. Different electrical and mechanical specifications can be accommodated.
3. LEDs Left/Right: G=green, Y=yellow, N/A=none, YG=Bi-color LED Yellow Green.
4. LEDs with internal resistor.
5. Bi- color Left LED.
6. For an explanation of EMI fingers, please refer to the mechanical drawing page.
Notes: 1.All connector part numbers starting with the series prefix J0 comply to the above limits. 2. Connector dimensions comply with FCC dimension requirements.
Mating Force Unmating Force Plug to Jack
Part Number (MAX) (MAX) Durability Retention (MIN)
J0 Series 5 lbs./2.268 kgs. 5 lbs./2.268 kgs. 750 Insertions 20 lbs./9.072 kgs.
RJ45 Durability Testing Rating
Part Shield Contact Housing
Number Material Finish Material Plating Area Solder Area Material Specification
J0 10-20m inches Nickel over Phosphor Nickel underplating and 120µ inches Sn90/Pb10
Series Brass 10-20m inches Brass Bronze selective gold plating 15µ inches over 50µ inches nickel Thermoplastic UL 94 V-0
RJ45 Material Specification
TD+ 1
CT 4
TD- 2
RD+ 3
CT 5
RD- 6
7
88
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
1CT : 1
TRANSMIT
1CT : 1
RECEIVE
CABLE SIDE
PCB SIDE TO PHY
0.001mF
1CT : 1
RECEIVE
8
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
TD+ 1
CT 4
TD- 2
RD+ 3
CT 5
RD- 6
NC 7
8
1CT : 1
TRANSMIT
CABLE SIDE
PCB SIDE TO PHY
CHS
GROUND
NOTE: Connect CHS GND to PCB ground.
75
75
75
75
0.001mF
1CT : 1
RECEIVE
8
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
TD+ 1
CT 2
TD- 4
RD+ 3
CT 5
RD- 6
NC 7
8
1CT : 1
TRANSMIT
CABLE SIDE
PCB SIDE TO PHY
CHS
GROUND
NOTE: Connect CHS GND to PCB ground.
75
75
75
75
PULSEJACKTM
1x1 Tab-DOWN RJ45
J403.A (1/05) 2
US 619 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Taiwan 886 2 2698 0228
••
Hong Kong 852 2788 6588
••
http://www.pulseeng.com
J0 Series Mechanicals
www.pulseeng.com
.350
8,89
.100
2,54
.120
3,05 .250
6,35
.100
2,54
.024
0,61
.398
10,11
.450
11,43
.620
15,75
.498
12,65
7531
86 42
.003
0,08
8X .035
0,89
2X.064
1,63
4X .040
1,02
2X .128
3,25
11
12 10
9
.193
4,90
.133
3,38
.050
1,27
FRONT
BACK
HOUSING POST
SHIELD PIN
.560
14,22
TOP OF PCB
TO BOTTOM
OF OPENING
.010
0,25
R 2.54
6,45
4X RMAX
.010
0,25
.660
16,76
Viewed from PCB Component side
J0 Series Electrical Schematics
J0006 J0011 J0012
Patent Pending
Date Code
Country of Origin
JXXXXXXXX
TM
.545
13,84
LEFT LED
RIGHT LED
.640
16,26
.140
3,56 SHIELD PIN
.290
7,37
.
425
10,80
.020
0,51
.135
3,43
.020
0,51
.125
3,18 .020
0,51
.125
3,18
SIGNAL PINS
HOUSING POST
.850
21,59MAX
FRONT VIEW
Connector Marking
(An example - parts are marked on
the top or end surface as shown)
BACK
FRONT
SIDE VIEW
EMI Fingers Part Number
Location
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
J0 Series Electrical Schematics (continued)
PULSEJACKTM
1x1 Tab-DOWN RJ45
3 J403.A (1/05)
US 619 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Taiwan 886 2 2698 0228
••
Hong Kong 852 2788 6588
••
http://www.pulseeng.com
www.pulseeng.com
0.001mF 2Kv
1CT : 1
RECEIVE
8
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
TD+ 1
CT 2
TD- 3
RD+ 4
CT 5
RD- 6
NC 7
8
1CT : 1
TRANSMIT
CABLE SIDE
PCB SIDE TO PHY
CHS
GROUND
75
75
NOTE: Connect CHS GND to PCB ground.
0.001mF
1CT : 1
RECEIVE
8
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
TD+ 1
CT 4
TD- 2
RD+ 3
CT 5
RD- 6
NC 7
8
CABLE SIDE
PCB SIDE TO PHY
CHS
GROUND
NOTE: Connect CHS GND to PCB ground.
75
75
75
75
1CT : Ö2
TRANSMIT
J0018
LED Configuration
9
10
12
11
LED = B & E Specification
(LEDs without internal resistors)
Right LED
Left LED
9
10
12
11
LED = M Specification
(LEDs without internal resistors)
Left LED
Right LED
9
10
12
11
LED = F Specification
(LEDs with internal resistors)
Right LED
Left LED
9
10
12
11
LED = G Specification
(Bi-color LED option with internal resistors)
Left LED
Right LED
8
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
TD+ 1
CT 3
TD- 2
RD+ 7
CT 6
RD- 8
4
5
1.25CT : 1
TRANSMIT
1CT : 1
RECEIVE
0.001mF
CABLE SIDE
PCB SIDE TO PHY
CHS GROUND
NOTE: Connect CHS GND to PCB ground.
75
75
75
75
8
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
TD+ 1
CT 3
TD- 2
RD+ 7
CT 6
RD- 8
4
5
1CT : 2.5
TRANSMIT
1CT : 1
RECEIVE
0.001mF
CABLE SIDE
PCB SIDE TO PHY
CHS GROUND
NOTE: Connect CHS GND to PCB ground.
75
75
75
75
J0033
J0073
TD+ 1
CT 4
TD- 2
RD+ 3
CT 5
RD- 6
7
88
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
1CT : 1
RECEIVE
CABLE SIDE
PCB SIDE TO PHY
1CT : 2
TRANSMIT
CABLE SIDE
PCB SIDE TO PHY
CHS GROUND
NOTE: Connect CHS GND to PCB ground.
TD+ 1
CT 3
TD- 2
RD+ 7
CT 6
RD- 8
4
58
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
1CT : 1
TRANSMIT
1CT : 1
RECEIVE
0.001mF
C1 75
75
75
75
8
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
TD+ 8
CT 6
TD- 7
RD+ 2
CT 3
RD- 1
4
5
1CT :1
TRANSMIT
1CT :1
RECEIVE
0.001mF
C1
CABLE SIDE
PCB SIDE TO PHY
CHS GROUND
NOTE: Connect CHS GND to PCB ground.
75
75
75
75
Yellow 585 nm 2.5 V 2.1 V
Green 565 nm 2.5 V 2.2 V
Standard LED Wavelength Forward* V(MAX) (TYP)
* Using an internal resistor within the LED increases the voltage rating of the
diode from 2.5 V to 5.0 V (assumes bias current = 20 mA).
J0024 J0026
J0048
J0035
4 J403.A (1/05)
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names metioned herein may be trademarks or registered trademarks of their respective owners.
For More Information :
PULSEJACKTM
1x1 Tab-DOWN RJ45
Application Notes
Increased Reliability
Pulse developed a patented method for ensuring the quality, consis-
tency, and connection integrity of encapsulated coils and other
three-dimensional electronic components. The InterLock Base con-
sists of an internal plastic carrier that holds the coil firmly in place
and provides precisely engineered “lead-channels” to lock together
the lead wires and the leadframe pins. All of the InterLock Base
interconnections are then simultaneously dip soldered,
providing for both efficiency and uniformity for best common mode
rejection and crosstalk.
Higher Manufacturing Yields
Because of this Pulse patented higher reliability method, there is less of
a chance of opens and shorts, thus providing higher yields.
Consistent Electrical and Magnetic Performance
- With internal magnetics specifically oriented on all parts, there
are more consistent readings on all functional tests. This is opti-
mized for best crosstalk, common mode rejection and return loss.
- With the selection of common mode material and winding
techniques, common mode noise rejection maintains integrity at
higher frequencies.
- Multiple tabs around shield-to-ground, shield-to-chassis,
and shunt noise to ground improves EMI suppression.
Advantages of the PulseJack Modules
©2005, Pulse Engineering, Inc. All Rights Reserved.
www.pulseeng.com
UNITED STATES
(Worldwide)
12220 World Trade Drive
San Diego, CA 92128
U.S.A.
http://www.pulseeng.com
TEL: 858 674 8100
FAX: 858 674 8262
UNITED KINGDOM
(Northern Europe)
1 & 2 Huxley Road
The Surrey Research Park
Guildford, Surrey GU2 5RE
United Kingdom
TEL: 44 1483 401700
FAX: 44 1483 401701
FRANCE
(Southern Europe)
Zone Industrielle
F-39270
Orgelet
France
TEL: 33 3 84 35 04 04
FAX: 33 3 84 25 46 41
TAIWAN, R.O.C.
(Northern Asia)
3F-4, No. 81, Sec. 1
HsinTai Wu Road
Hsi-Chih, Taipei Hsien
Taiwan, R.O.C.
Tel: 886 2 2698 0228
FAX: 886 2 2698 0948
SINGAPORE
(Southern Asia)
150 Kampong Ampat
#07-01/02
KA Centre
Singapore 368324
TEL: 65 6287 8998
FAX: 65 6280 0080
HONG KONG
(China/Hong Kong)
9/F, Phase 2, Tai Sang
Shatin Warehouse Centre
6 Wong Chuk Yeung Street
Fotan, Shatin, Hong Kong
TEL: 852 2788 6588
FAX: 852 2776 1055
DISTRIBUTOR
