MODEL R10A-3 R10A-5 R10A-12 R10A-15 R10A-24
MAX OUTPUT WATTAGE[W] 6 10 10.8 10.5 12
DC OUTPUT 3V 2.0A 5V 2.0A 12V 0.9A 15V 0.7A 24V 0.5A
SPECIFICATIONS
MODEL R10A-3 R10A-5 R10A-12 R10A-15 R10A-24
INPUT
VOLTAGE[V] AC85 - 132 1for DC110 - 170
CURRENT[A]
ACIN 100V
0.24typ (Io=100%)
FREQUENCY[Hz] 47 - 440 or DC
EFFICIENCY[%] 64typ 70typ 75typ 76typ 78typ
INRUSH CURRENT[A]
ACIN 100V
20typ (Io=100%)(
At cold start)
LEAKAGE CURRENT[mA]
0.5max (According to UL,CSA and DEN-AN)
OUTPUT
VOLTAGE[V] 3 5 121524
CURRENT[A] 2.0 2.0 0.9 0.7 0.5
LINE REGULATION[mV] 20max 20max 48max 60max 96max
LOAD REGULATION[mV] 40max 40max 100max 120max 150max
RIPPLE[mVp-p]
0to+50
C
80max 80max 120max 120max 120max
-10-0
C
140max 140max 160max 160max 160max
RIPPLE NOISE[mVp-p]
0to+50
C
120max 120max 150max 150max 150max
-10-0
C
160max 160max 180max 180max 180max
TEMPERATURE REGULATION[mV]
0to+50
C
50max 50max 120max 150max 240max
-10 to +50C
60max 60max 150max 180max 290max
DRIFT[mV]
*1
20max 20max 48max 60max 96max
START-UP TIME[ms] 100max (ACIN 85V,Io=100%)
HOLD-UP TIME[ms] 10typ (ACIN 85V,Io=100%,0to+50
C)20typ (ACIN 100V,Io=100%,0to+50
C)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
2.85 - 3.6 4.5 - 5.5 10.8 - 13.2 13.5 - 16.5 21.6 - 26.4
PROTECTION
CIRCUIT AND
OTHERS
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically (ACIN 100V)
OVERVOLTAGE PROTECTION
4.00V min Works over 115% of rating (By zener diode clamping)
OPERATING INDICATION
LED (Green)
REMOTE SENSING Not provided
REMOTE ON/OFF Not provided
ISOLATION
INPUT-OUTPUT AC2,000V 1minute,Cutoff current = 10mA max,DC500V 50MWmin (At Room Temperature)
INPUT-FG,COVER AC2,000V 1minute,Cutoff current = 10mA max,DC500V 50MWmin (At Room Temperature)
OUTPUT-FG,COVER AC500V 1minute,Cutoff current = 100mA max,DC500V 50MWmin (At Room Temperature)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
-10 to +60C,20 - 90%RH (Non condensing)(
Refer to DERATING CURVE), 3,000m (10,000feet)max
STORAGE TEMP.,HUMID.AND ALTITUDE
-20 to +75C,20 - 90%RH (Non condensing), 9,000m (30,000feet)max
VIBRATION 10 - 55Hz,19.6m/s2(2G), 3minutes period,60minutes each along X,Y and Z axis
IMPACT 196.1m/s2(20G), 11ms,once each X,Y and Z axis
SAFETY AND
NOISE
REGULATIONS
AGENCY APPROVALS UL60950-1,C-UL Complies with DEN-AN
CONDUCTED NOISE Complies with FCC-B,VCCI-B
OTHERS CASE SIZE/WEIGHT 26X68X68mm (WXHXD)/150g max (without cover)
COOLING METHOD Convection
*1Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.
*2Please contact us about safety approvals for the model with option.
*Avoid prolonged use under over-load.
*Series/Parallel operation with other model is not possible.
*Derating is required when operated with case cover.
R10A
AC-DC Power Supplies Enclosed type
R 10A -5 -O
Ordering information
1Series name
2Output wattage
3Output voltage
4Optional *2
G :Low leakage current
J :Connector type
N :with Cover
R
1234
R
R-2
¡DERATING CURVE
¡RISE TIME & FALL TIME (R10A-5)
¡OVERCURRENT CHARACTERISTICS (R10A-5)
¡STATIC CHARACTERISTICS (R10A-5)
V
mVp-p
Output Voltage
Ripple
Io=100%
4.20
4.40
4.60
4.80
5.00
5.20
050 60 70 80 90 100 110 120 130
10
20
30
40
V60Hz
ACIN 100V
DC Output
AC Input
Io=100%
20ms/DIV
Please see Electric Characteristics for shaded Ripple,
Ripple Noise.
1Convection
2
1
2
Forced Air (0.5m3/min)
V
V
ª
1.0
2.0
3.0
4.0
5.0
6.0
01.0 2.0
0
20
40
60
80
100
-10 0 10 20 30 40[30] 50[40] 60[50] 70[60]
A
OUTPUT VOLTAGE
RIPPLE
INPUT VOLTAGE
OUTPUT VOLTAGE
OUTPUT CURRENT
OUTPUT VOLTAGE
AMBIENT TEMPERATURE Inside of means with cover
R
R-3
R10A
External view
(Mfr : J.S.T.)
(Mfr : J.S.T.)
I/O Connector Mating Connector
B3P5-VH
B4P-VH
VHR-5N
¶Weight : 150g or less
(without cover)
¶Cover is optional
¶Tolerance : t1
¶Dimensions in mm.
Connector type Barrier strip type
Terminal
+
FG
CN2
CN1
AC(L)
AC(N)
-
+
FG
AC( L )
AC(N)
-
Chain: SVH-21-P1.1
Loose: BVH-21-P1.1
VHR-4N
max
(10) M3
Cover
(13)
Safety Cover
22
(21)
Voltage Adjust
LED Name Plate
Name Plate
2-M3
Mounting Hole
Name Plate
(61)
(13.5) 7.5
3714
22.5
26
3.5
63.5
º
3.5
68
9.5
50t
0.5
2-M3
Mounting Hole
14 68
max
26t
0.2
36
CN1
CN2
Mounting torque: 0.6N•m(6.3kgf•cm)max
Performance data
MODEL R15A-3 R15A-5 R15A-9 R15A-12 R15A-15 R15A-18 R15A-24
MAX OUTPUT WATTAGE[W] 9 15 15.3 15.6 15 15.3 16.8
DC OUTPUT 3V 3.0A 5V 3A 9V 1.7A 12V 1.3A 15V 1.0A 18V 0.85A 24V 0.7A
SPECIFICATIONS
MODEL R15A-3 R15A-5 R15A-9 R15A-12 R15A-15 R15A-18 R15A-24
INPUT
VOLTAGE[V] AC85 - 132 1for DC110 - 170
CURRENT[A]
ACIN 100V
0.37typ (Io=100%)
FREQUENCY[Hz] 47 - 440 or DC
EFFICIENCY[%] 68typ 72typ 73typ 75typ 75typ 76typ 78typ
INRUSH CURRENT[A]
ACIN 100V
20typ (Io=100%)(
At cold start)
LEAKAGE CURRENT[mA]
0.5max (According to UL,CSA and DEN-AN)
OUTPUT
VOLTAGE[V] 35912151824
CURRENT[A] 3.0 3.0 1.7 1.3 1.0 0.85 0.7
LINE REGULATION[mV] 20max 20max 36max 48max 60max 72max 96max
LOAD REGULATION[mV] 40max 40max 100max 100max 120max 120max 150max
RIPPLE[mVp-p]
0to+50
C
80max 80max 120max 120max 120max 120max 120max
-10-0
C
140max 140max 160max 160max 160max 160max 160max
RIPPLE NOISE[mVp-p]
0to+50
C
120max 120max 150max 150max 150max 150max 150max
-10-0
C
160max 160max 180max 180max 180max 180max 180max
TEMPERATURE REGULATION[mV]
0to+50
C
50max 50max 90max 120max 150max 180max 240max
-10 to +50C
60max 60max 120max 150max 180max 200max 290max
DRIFT[mV]
*1
20max 20max 36max 48max 60max 72max 96max
START-UP TIME[ms] 100max (ACIN 85V,Io=100%)
HOLD-UP TIME[ms] 10typ (ACIN 85V,Io=100%,0to+50
C)20typ (ACIN 100V,Io=100%,0to+50
C)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
2.85 - 3.6 4.5 - 5.5 8.1 - 9.9 10.8 - 13.2 13.5 - 16.5 16.2 - 19.8 21.6 - 26.4
PROTECTION
CIRCUIT AND
OTHERS
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically (ACIN 100V)
OVERVOLTAGE PROTECTION
4.00V min Works over 115% of rating (By zener diode clamping)
OPERATING INDICATION
LED (Green)
REMOTE SENSING Not provided
REMOTE ON/OFF Not provided
ISOLATION
INPUT-OUTPUT AC2,000V 1minute,Cutoff current = 10mA max,DC500V 50MWmin (At Room Temperature)
INPUT-FG,COVER AC2,000V 1minute,Cutoff current = 10mA max,DC500V 50MWmin (At Room Temperature)
OUTPUT-FG,COVER AC500V 1minute,Cutoff current = 100mA max,DC500V 50MWmin (At Room Temperature)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
-10 to +60C,20 - 90%RH (Non condensing)(
Refer to DERATING CURVE), 3,000m (10,000feet)max
STORAGE TEMP.,HUMID.AND ALTITUDE
-20 to +75C,20 - 90%RH (Non condensing), 9,000m (30,000feet)max
VIBRATION 10 - 55Hz,19.6m/s2(2G), 3minutes period,60minutes each along X,Y and Z axis
IMPACT 196.1m/s2(20G), 11ms,once each X,Y and Z axis
SAFETY AND
NOISE
REGULATIONS
AGENCY APPROVALS UL60950-1,C-UL Complies with DEN-AN
CONDUCTED NOISE Complies with FCC-B,VCCI-B
OTHERS CASE SIZE/WEIGHT 30X69X84mm (WXHXD)/ 200g max (without cover)
COOLING METHOD Convection
*1Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.
*2Please contact us about safety approvals for the model with option.
*Avoid prolonged use under over-load.
*Series/Parallel operation with other model is not possible.
*Derating is required when operated with case cover.
R15A
AC-DC Power Supplies Enclosed type
R 15A -5 -O
Ordering information
1Series name
2Output wattage
3Output voltage
4Optional *2
C :with Coating
G :Low leakage current
J :Connector type
N :with Cover
R
1234
R
R-4
¡RISE TIME & FALL TIME (R15A-5)
¡STATIC CHARACTERISTICS (R15A-5)
¡INRUSH CURRENT (R15A-5)
¡OVERCURRENT CHARACTERISTICS (R15A-5)
V
mVp-p
Output Voltage
Ripple
Io=100%
4.20
4.40
4.60
4.80
5.00
5.20
050 60 70 80 90 100 110 120 130
10
20
30
40
V60Hz
OUTPUT VOLTAGE
RIPPLE
INPUT VOLTAGE
ACIN 100V
DC Output
AC Input
Io=100%
20ms/DIV
V
A
1.0
2.0
3.0
4.0
5.0
6.0
01.0 2.0 3.0 4.0
OUTPUT VOLTAGE
OUTPUT CURRENT
10ms/DIV
Frequency 60Hz
Load 100%
Input voltage AC100V
10A/DIV
R
R-5
R15A
External view
(Mfr : J.S.T.)
I/O Connector Mating Housing
B3P5-VH
B4P-VH
VHR-5N
¶Weight : 200g or less
(without cover)
¶Cover is optional
¶Tolerance : t1
¶Dimensions in mm.
Connector type Barrier strip type
+
FG
CN2
CN1
AC(L)
AC(N)
-
+
FG
AC(L)
AC(N)
-
(10)
22
Cover
M3
Name Plate
Voltage Adjust
2-M3
Mounting Hole
2-M3
Mounting Hole
Name Plate
55t
0.5
3.5
76
84
14
3
5
3.5
18.5
5 1.75
36.5
69
Name Plate
LED
max
Safety Cover
(23.5)
(13.5)
(63)
(61)
(13.5) 7.5 9.5
16
25
30
34
74t
0.5
max
VHR-4N
CN1
CN2
(Mfr : J.S.T.)
Terminal
Chain: SVH-21-P1.1
Loose: BVH-21-P1.1
Mounting torque: 0.6N•m(6.3kgf•cm)max
Performance data
MODEL R25A-3 R25A-5 R25A-9 R25A-12 R25A-15 R25A-18 R25A-24
MAX OUTPUT WATTAGE[W] 15 25 25.2 25.2 25.5 25.2 26.4
DC OUTPUT 3V 5.0A 5V 5A 9V 2.8A 12V 2.1A 15V 1.7A 18V 1.4A 24V 1.1A
SPECIFICATIONS
MODEL R25A-3 R25A-5 R25A-9 R25A-12 R25A-15 R25A-18 R25A-24
INPUT
VOLTAGE[V] AC85 - 132 1for DC110 - 170
CURRENT[A]
ACIN 100V
0.58typ (Io=100%)
FREQUENCY[Hz] 47 - 440 or DC
EFFICIENCY[%] 69typ 73typ 75typ 76typ 76typ 77typ 79typ
INRUSH CURRENT[A]
ACIN 100V
20typ (Io=100%)(
At cold start)
LEAKAGE CURRENT[mA]
0.5max (According to UL,CSA and DEN-AN)
OUTPUT
VOLTAGE[V] 35912151824
CURRENT[A] 5.0 5.0 2.8 2.1 1.7 1.4 1.1
LINE REGULATION[mV] 20max 20max 36max 48max 60max 72max 96max
LOAD REGULATION[mV] 40max 40max 100max 100max 120max 120max 150max
RIPPLE[mVp-p]
0to+50
C
80max 80max 120max 120max 120max 120max 120max
-10-0
C
140max 140max 160max 160max 160max 160max 160max
RIPPLE NOISE[mVp-p]
0to+50
C
120max 120max 150max 150max 150max 150max 150max
-10-0
C
160max 160max 180max 180max 180max 180max 180max
TEMPERATURE REGULATION[mV]
0to+50
C
50max 50max 90max 120max 150max 180max 240max
-10 to +50C
60max 60max 120max 150max 180max 200max 290max
DRIFT[mV]
*1
20max 20max 36max 48max 60max 72max 96max
START-UP TIME[ms] 200max (ACIN 85V,Io=100%)
HOLD-UP TIME[ms] 10typ (ACIN 85V,Io=100%,0to+50
C)20typ (ACIN 100V,Io=100%,0to+50
C)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
2.85 - 3.6 4.5 - 5.5 8.1 - 9.9 10.8 - 13.2 13.5 - 16.5 16.2 - 19.8 21.6 - 26.4
PROTECTION
CIRCUIT AND
OTHERS
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically (ACIN 100V)
OVERVOLTAGE PROTECTION
4.00 - 5.25V Works at 115 - 140% of rating
OPERATING INDICATION
LED (Green)
REMOTE SENSING Not provided
REMOTE ON/OFF Not provided
ISOLATION
INPUT-OUTPUT AC2,000V 1minute,Cutoff current = 10mA max,DC500V 50MWmin (At Room Temperature)
INPUT-FG,COVER AC2,000V 1minute,Cutoff current = 10mA max,DC500V 50MWmin (At Room Temperature)
OUTPUT-FG,COVER AC500V 1minute,Cutoff current = 100mA max,DC500V 50MWmin (At Room Temperature)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
-10 to +60C,20 - 90%RH (Non condensing)(
Refer to DERATING CURVE), 3,000m (10,000feet)max
STORAGE TEMP.,HUMID.AND ALTITUDE
-20 to +75C,20 - 90%RH (Non condensing), 9,000m (30,000feet)max
VIBRATION 10 - 55Hz,19.6m/s2(2G), 3minutes period,60minutes each along X,Y and Z axis
IMPACT 196.1m/s2(20G), 11ms,once each X,Y and Z axis
SAFETY AND
NOISE
REGULATIONS
AGENCY APPROVALS UL60950-1,C-UL Complies with DEN-AN
CONDUCTED NOISE Complies with FCC-B,VCCI-B
OTHERS CASE SIZE/WEIGHT 31X69X104mm (WXHXD)/ 250g max (without cover)
COOLING METHOD Convection
*1Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.
*2Please contact us about safety approvals for the model with option.
*Avoid prolonged use under over-load.
*Series/Parallel operation with other model is not possible.
*Derating is required when operated with case cover.
R25A
AC-DC Power Supplies Enclosed type
R 25A -5 -O
Ordering information
1Series name
2Output wattage
3Output voltage
4Optional *2
C :with Coating
G :Low leakage current
J :Connector type
N :with Cover
R
1234
R
R-6
¡INRUSH CURRENT (R25A-5)
¡RISE TIME & FALL TIME (R25A-5)
¡STATIC CHARACTERISTICS (R25A-5)
¡OVERCURRENT CHARACTERISTICS (R25A-5)
V
mVp-p
Output Voltage
Ripple
Io=100%
4.20
4.40
4.60
4.80
5.00
5.20
050 60 70 80 90 100 110 120 130
10
20
30
40
V60Hz
OUTPUT VOLTAGE
INPUT VOLTAGE
RIPPLE
ACIN 100V
DC Output
AC Input
Io=100%
20ms/DIV
V
1.0
2.0
3.0
4.0
5.0
6.0
02.0 4.0 6.0 8.0
A
OUTPUT VOLTAGE
OUTPUT CURRENT
10ms/DIV
10A/DIV
Frequency 60Hz
Load 100%
Input voltage AC100V
R
R-7
R25A
External view
(Mfr : J.S.T.)
I/O Connector Mating Housing
B3P5-VH
B4P-VH
VHR-5N
Connector type
VHR-4N
CN1
CN2
(Mfr : J.S.T.)
Terminal
Chain: SVH-21-P1.1
Loose: BVH-21-P1.1
+
FG
CN2
CN1
AC(L)
AC(N)
-
¶Weight : 250g or less
(without cover)
¶Cover is optional
¶Tolerance : t1
¶Dimensions in mm.
Barrier strip type
+
FG
AC(L)
AC(N)
-
(10)
22
Cover
M3
Name Plate
Voltage Adjust
2-M3
Mounting Hole
70
t0.5
23.5
36.5
69
Name Plate
LED
max
Safety Cover
(23.5)
(13.5)
(63)
(61)
(13.5) 7.5 9.5
3-M3
Mounting Hole
Name Plate
º3.5
96
104
14
3
3.5
17.5
26
31
35
90t
0.5
9
83t
0.5
max
Mounting torque: 0.6N•m(6.3kgf•cm)max
Performance data
MODEL R50A-3 R50A-5 R50A-9 R50A-12 R50A-15 R50A-18 R50A-24
MAX OUTPUT WATTAGE[W] 30 50 50.4 50.4 51 50.4 52.8
DC OUTPUT 3V 10A 5V 10A 9V 5.6A 12V 4.2A 15V 3.4A 18V 2.8A 24V 2.2A
SPECIFICATIONS
MODEL R50A-3 R50A-5 R50A-9 R50A-12 R50A-15 R50A-18 R50A-24
INPUT
VOLTAGE[V] AC85 - 132 1for DC110 - 170
CURRENT[A]
ACIN 100V
1.1typ (Io=100%)
FREQUENCY[Hz] 47 - 440 or DC
EFFICIENCY[%] 74typ 78typ 79typ 80typ 81typ 82typ 83typ
INRUSH CURRENT[A]
ACIN 100V
30typ (Io=100%)(
At cold start)
LEAKAGE CURRENT[mA]
0.5max (According to UL,CSA and DEN-AN)
OUTPUT
VOLTAGE[V] 35912151824
CURRENT[A] 10 10 5.6 4.2 3.4 2.8 2.2
LINE REGULATION[mV] 20max 20max 36max 48max 60max 72max 96max
LOAD REGULATION[mV] 40max 40max 100max 100max 120max 120max 150max
RIPPLE[mVp-p]
0to+50
C
80max 80max 120max 120max 120max 120max 120max
-10-0
C
140max 140max 160max 160max 160max 160max 160max
RIPPLE NOISE[mVp-p]
0to+50
C
120max 120max 150max 150max 150max 150max 150max
-10-0
C
160max 160max 180max 180max 180max 180max 180max
TEMPERATURE REGULATION[mV]
0to+50
C
50max 50max 90max 120max 150max 180max 240max
-10 to +50C
60max 60max 120max 150max 180max 200max 290max
DRIFT[mV]
*1
20max 20max 36max 48max 60max 72max 96max
START-UP TIME[ms] 200max (ACIN 85V,Io=100%)
HOLD-UP TIME[ms] 10typ (ACIN 85V,Io=100%,0to+50
C)20typ (ACIN 100V,Io=100%,0to+50
C)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
2.85 - 3.6 4.5 - 5.5 8.1 - 9.9 10.8 - 13.2 13.5 - 16.5 16.2 - 19.8 21.6 - 26.4
PROTECTION
CIRCUIT AND
OTHERS
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically (ACIN 100V)
OVERVOLTAGE PROTECTION
4.00 - 5.25V Works at 115 - 140% of rating
OPERATING INDICATION
LED (Green)
REMOTE SENSING Not provided
REMOTE ON/OFF Not provided
ISOLATION
INPUT-OUTPUT AC2,000V 1minute,Cutoff current = 10mA max,DC500V 50MWmin (At Room Temperature)
INPUT-FG,COVER AC2,000V 1minute,Cutoff current = 10mA max,DC500V 50MWmin (At Room Temperature)
OUTPUT-FG,COVER AC500V 1minute,Cutoff current = 100mA max,DC500V 50MWmin (At Room Temperature)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
-10 to +60C,20 - 90%RH (Non condensing)(
Refer to DERATING CURVE), 3,000m (10,000feet)max
STORAGE TEMP.,HUMID.AND ALTITUDE
-20 to +75C,20 - 90%RH (Non condensing), 9,000m (30,000feet)max
VIBRATION 10 - 55Hz,19.6m/s2(2G), 3minutes period,60minutes each along X,Y and Z axis
IMPACT 196.1m/s2(20G), 11ms,once each X,Y and Z axis
SAFETY AND
NOISE
REGULATIONS
AGENCY APPROVALS UL60950-1,C-UL Complies with DEN-AN
CONDUCTED NOISE Complies with FCC-B,VCCI-B
OTHERS CASE SIZE/WEIGHT 33X85X119mm (WXHXD)/ 300g max (without cover)
COOLING METHOD Convection
*1Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.
*2Please contact us about safety approvals for the model with option.
*Avoid prolonged use under over-load.
*Parallel operation is not possible.
*Derating is required when operated with case cover.
R50A
AC-DC Power Supplies Enclosed type
R 50A -5 -O
Ordering information
1Series name
2Output wattage
3Output voltage
4Optional *2
C :with Coating
G :Low leakage current
J :Connector type
N :with Cover
R
1234
R
R-8
¡INRUSH CURRENT (R50A-5)
¡RISE TIME & FALL TIME (R50A-5)
¡STATIC CHARACTERISTICS (R50A-5)
¡OVERCURRENT CHARACTERISTICS (R50A-5)
V
mVp-p
Output Voltage
Ripple
Io=100%
4.20
4.40
4.60
4.80
5.00
5.20
5.40
050 60 70 80 90 100 110 120 130
30
40
50
60
70
80
20
V60Hz
OUTPUT VOLTAGE
RIPPLE
INPUT VOLTAGE
ACIN 100V
DC Output
AC Input
Io=100%
20ms/DIV
V
A
1.0
2.0
3.0
4.0
5.0
6.0
0510
15
OUTPUT VOLTAGE
OUTPUT CURRENT
10ms/DIV
10A/DIV
Frequency 60Hz
Load 100%
Input voltage AC100V
R
R-9
R50A
External view
(Mfr : J.S.T.)
I/O Connector Mating Housing
B3P5-VH
B4P-VH
VHR-5N
Connector type
VHR-4N
CN1
CN2
(Mfr : J.S.T.)
Terminal
Chain: SVH-21-P1.1
Loose: BVH-21-P1.1
¶Weight : 300g or less
(without cover)
¶Cover is optional
¶Tolerance : t1
¶Dimensions in mm.
Barrier strip type
+
FG
CN1
AC(L)
AC(N)
-
CN2 +
FG
AC(L)
AC(N)
-
17.5
Cover
M3
Name
Plate
Voltage Adjust
2-M3
Mounting Hole
35
Name Plate
LED
max
Safety
Cover
(14)
(72)
(61)
(13.5) 7.5 9.5
(10.5)
(24) 70
t0.5
23
85
2-M3
max
Mounting Hole
Name Plate
º3.5
3
3.5
17.5
30
33
37
14 119
100
t0.5
111
14
Mounting torque: 0.49N•m(5.0kgf•cm)max
Performance data
MODEL R100U-3 R100U-5 R100U-9 R100U-12 R100U-15 R100U-18 R100U-24
MAX OUTPUT WATTAGE[W] 60 100 103.5 102 105 100.8 108
DC OUTPUT 3V 20A 5V 20A 9V 11.5A 12V 8.5A 15V 7A 18V 5.6A 24V 4.5A
SPECIFICATIONS
MODEL R100U-3 R100U-5 R100U-9 R100U-12 R100U-15 R100U-18 R100U-24
INPUT
VOLTAGE[V] AC85 - 132 1for DC110 - 170
CURRENT[A]
ACIN 100V
2.8typ (Io=100%)
FREQUENCY[Hz] 47 - 440 or DC
EFFICIENCY[%] 75typ 79typ 80typ 82typ 83typ 84typ 85typ
INRUSH CURRENT[A]
ACIN 100V
15typ (Io=100%)
LEAKAGE CURRENT[mA]
0.5max (60Hz,According to UL,CSA and DEN-AN)
OUTPUT
VOLTAGE[V] 3 5 9 12151824
CURRENT[A] 20 20 11.5 8.5 7 5.6 4.5
LINE REGULATION[mV] 20max 20max 36max 48max 60max 72max 96max
LOAD REGULATION[mV] 40max 40max 100max 100max 120max 120max 150max
RIPPLE[mVp-p]
0to+50
C
80max 80max 120max 120max 120max 120max 120max
-10-0
C
140max 140max 160max 160max 160max 160max 160max
RIPPLE NOISE[mVp-p]
0to+50
C
120max 120max 150max 150max 150max 150max 150max
-10-0
C
160max 160max 180max 180max 180max 180max 180max
TEMPERATURE REGULATION[mV]
0to+50
C
50max 50max 90max 120max 150max 180max 240max
-10 to +50C
60max 60max 120max 150max 180max 200max 290max
DRIFT[mV]
*1
20max 20max 36max 48max 60max 72max 96max
START-UP TIME[ms] 200max (ACIN 85V,Io=100%)
HOLD-UP TIME[ms] 20typ (ACIN 100V,Io=100%,0to+50
C)10typ (ACIN 85V,Io=100%,0to+50
C)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
2.85 - 3.6 4.5 - 5.5 8.1 - 9.9 10.8 - 13.2 13.5 - 16.5 16.2 - 19.8 21.6 - 26.4
PROTECTION
CIRCUIT AND
OTHERS
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically
OVERVOLTAGE PROTECTION
4.00 - 5.25V Works at 115 - 140% of rating
OPERATING INDICATION
LED (Green)
REMOTE SENSING Provided
REMOTE ON/OFF Not provided
ISOLATION
INPUT-OUTPUT AC2,000V 1minute,Cutoff current = 10mA max,DC500V 50MWmin (At Room Temperature)
INPUT-FG,COVER AC2,000V 1minute,Cutoff current = 10mA max,DC500V 50MWmin (At Room Temperature)
OUTPUT-FG,COVER AC500V 1minute,Cutoff current = 100mA max,DC500V 50MWmin (At Room Temperature)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
-10 to +60C,20 - 90%RH (Non condensing)(
Refer to DERATING CURVE), 3,000m (10,000feet)max
STORAGE TEMP.,HUMID.AND ALTITUDE
-20 to +75C,20 - 90%RH (Non condensing), 9,000m (30,000feet)max
VIBRATION 10 - 55Hz,19.6m/s2(2G), 3minutes period,60minutes each along X,Y and Z axis
IMPACT 196.1m/s2(20G), 11ms,once each X,Y and Z axis
SAFETY AND
NOISE
REGULATIONS
AGENCY APPROVALS UL60950-1,CSA C22.2 No.60950-1,EN60950-1 Complies with DEN-AN and IEC60950-1
CONDUCTED NOISE Complies with FCC-B,VCCI-B
OTHERS CASE SIZE/WEIGHT 34.5X93X160mm (WXHXD)/ 600gmax (without cover)
COOLING METHOD Convection
*1Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.
*2Please contact us about safety approvals for the model with option.
*Avoid prolonged use under over-load.
*Parallel operation with other model is not possible.
*Derating is required when operated with case cover.
R100U
AC-DC Power Supplies Enclosed type
R 100 U -5 -O
Ordering information
1Series name
2Output wattage
3UL recognized,TuV
approved,CSA certified
4Output voltage
5Optional *2
C :with Coating
G :Low leakage current
N :with Cover
R
12345
R
R-10
¡OVERCURRENT CHARACTERISTICS (R100U-5)
¡STATIC CHARACTERISTICS (R100U-5)
¡RISE TIME & FALL TIME (R100U-5)
¡DERATING CURVE
R
R-11
R100U
External view
¶Weight : 600g or less
(without cover)
¶Cover is optional
¶Tolerance : t1
¶Dimensions in mm. Mounting torque: 1.2N•m(12.8kgf•cm)max
Performance data
MODEL R150U-3 R150U-5 R150U-9 R150U-12 R150U-15 R150U-18 R150U-24
MAX OUTPUT WATTAGE[W] 90 150 153 156 150 153 156
DC OUTPUT 3V 30A 5V 30A 9V 17A 12V 13A 15V 10A 18V 8.5A 24V 6.5A
SPECIFICATIONS
MODEL R150U-3 R150U-5 R150U-9 R150U-12 R150U-15 R150U-18 R150U-24
INPUT
VOLTAGE[V] AC85 - 132 1for DC110 - 170
CURRENT[A]
ACIN 100V
4.2typ (Io=100%)
FREQUENCY[Hz] 47 - 440 or DC
EFFICIENCY[%] 74typ 78typ 79typ 80typ 82typ 83typ 84typ
INRUSH CURRENT[A]
ACIN 100V
15typ (Io=100%)
LEAKAGE CURRENT[mA]
0.5max (60Hz,According to UL,CSA and DEN-AN)
OUTPUT
VOLTAGE[V] 3 5 9 12151824
CURRENT[A] 30 30 17 13 10 8.5 6.5
LINE REGULATION[mV] 20max 20max 36max 48max 60max 72max 96max
LOAD REGULATION[mV] 40max 40max 100max 100max 120max 120max 150max
RIPPLE[mVp-p]
0to+50
C
80max 80max 120max 120max 120max 120max 120max
-10-0
C
140max 140max 160max 160max 160max 160max 160max
RIPPLE NOISE[mVp-p]
0to+50
C
120max 120max 150max 150max 150max 150max 150max
-10-0
C
160max 160max 180max 180max 180max 180max 180max
TEMPERATURE REGULATION[mV]
0to+50
C
50max 50max 90max 120max 150max 180max 240max
-10 to +50C
60max 60max 120max 150max 180max 200max 290max
DRIFT[mV]
*1
20max 20max 36max 48max 60max 72max 96max
START-UP TIME[ms] 200max (ACIN 85V,Io=100%)
HOLD-UP TIME[ms] 20typ (ACIN 100V,Io=100%,0to+50
C)10typ (ACIN 85V,Io=100%,0to+50
C)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
2.85 - 3.6 4.5 - 5.5 8.1 - 9.9 10.8 - 13.2 13.5 - 16.5 16.2 - 19.8 21.6 - 26.4
PROTECTION
CIRCUIT AND
OTHERS
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically
OVERVOLTAGE PROTECTION
4.00 - 5.25V Works at 115 - 140% of rating
OPERATING INDICATION
LED (Green)
REMOTE SENSING Provided
REMOTE ON/OFF Not provided
ISOLATION
INPUT-OUTPUT AC2,000V 1minute,Cutoff current = 10mA max,DC500V 50MWmin (At Room Temperature)
INPUT-FG,COVER AC2,000V 1minute,Cutoff current = 10mA max,DC500V 50MWmin (At Room Temperature)
OUTPUT-FG,COVER AC500V 1minute,Cutoff current = 100mA max,DC500V 50MWmin (At Room Temperature)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
-10 to +60C,20 - 90%RH (Non condensing)(
Refer to DERATING CURVE), 3,000m (10,000feet)max
STORAGE TEMP.,HUMID.AND ALTITUDE
-20 to +75C,20 - 90%RH (Non condensing), 9,000m (30,000feet)max
VIBRATION 10 - 55Hz,19.6m/s2(2G), 3minutes period,60minutes each along X,Y and Z axis
IMPACT 196.1m/s2(20G), 11ms,once each X,Y and Z axis
SAFETY AND
NOISE
REGULATIONS
AGENCY APPROVALS UL60950-1,CSA C22.2 No.60950-1,EN60950-1 Complies with DEN-AN and IEC60950-1
CONDUCTED NOISE Complies with FCC-B,VCCI-B
OTHERS CASE SIZE/WEIGHT 44.5X93X175mm (WXHXD)/ 900g max (without cover)
COOLING METHOD Convection
*1Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.
*2Please contact us about safety approvals for the model with option.
*Avoid prolonged use under over-load.
*Parallel operation with other model is not possible.
*Derating is required when operated with case cover.
R150U
AC-DC Power Supplies Enclosed type
R 150 U -5 -O
Ordering information
1Series name
2Output wattage
3UL recognized,TuV
approved,CSA certified
4Output voltage
5Optional *2
C :with Coating
G :Low leakage current
N :with Cover
R
12345
R
R-12
¡OVERCURRENT CHARACTERISTICS (R150U-5)
¡STATIC CHARACTERISTICS (R150U-5)
¡RISE TIME & FALL TIME (R150U-5)
¡DERATING CURVE
R
R-13
R150U
External view
¶Weight : 900g or less
(without cover)
¶Cover is optional
¶Tolerance : t1
¶Dimensions in mm. Mounting torque: 1.2N•m(12.8kgf•cm)max
Performance data
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Cosel:
R100U-5-N R10A-24-J R150-5-C R10A-5-C R50A-15-C R25A-15-N R150U-3-C R150-12-GN R50A-15-N R50A-
24-G R100U-12 R150U-24 R15A-9-C R100-12-N R50A-24-M R50A-18-N R15A-15 R100-24 R15A-5-JN R150U-
12 R100-5 R150-15-C R25A-3-J R100-24-G R10A-12-CN R25A-3 R25A-18-JN R15A-24 R50A-3-CN R150U-24-
MN R50A-5-CJN R50A-5-J R100U-18-N R100U-24-CN R50A-12-C R10A-24-N R100U-15 R15A-5-CN R50A-15-
JN R25A-15 R10A-12 R100-5-VN R150U-15-N R150U-15 R10A-15-GN R25A-5-CN R150-18-N R25A-12-CN
R150-12 R50A-9-JN R50A-24-CJ R50A-5-N R100-15-M R15A-24-J R150-5-N R150-24-N R15A-12-CJN R25A-5-
JN R100-3-CN R15A-3-JN R25A-12-JN R150U-9-N R100-5-GN R10A-15-N R15A-15-JN R25A-24-C R15A-5-C
R10A-5-CN R150-24-CN R50A-3-N R100U-3 R50A-12-G R50A-5-JN R15A-15-N R15A-24-JN R50A-15-CN
R150-24-G R100U-12-C R150U-3-CN R25A-5-N R10A-5-G R100U-24-M R50A-12-CJ R150U-9 R100U-15-CN
R150-3 R150U-24-C R25A-15-CN R15A-12-N R100-12 R100-5-CN R15A-9-J R15A-9-JN R100-15 R25A-3-C
R10A-5-CJ R25A-12-N R25A-5-GN R15A-5-CJ R10A-12-C
