IN-S85AT series
Top View SMD LED 0805 PCB Type
Inolux Corporation
Proprietary & Confidential
February, 13, 2019
www.inolux-corp.com
Page 1
Features
•
0805 1.1mm SMD LED
•
High Brightness
•
AlInGaP / InGaN Technology
•
Small package
•
High reliability
•
Clear Lens
Applications
•
Consumer Electronics
•
Wearables
•
Automobile After Market
•
Industrial Equipment
Description
The IN-S85AT series is a popular low profile 0805
package with versatile design capabilities. It is a PCB
type molding style LED which can be used in various
applications.
Recommended Solder Pattern
Figure 1. IN-S85AT Solder Pattern
Package Dimensions in mm
Figure 2. IN-S85AT Package Dimensions
IN-S85AT series
Top View SMD LED 0805 PCB Type
Inolux Corporation
Proprietary & Confidential
February, 13, 2019
www.inolux-corp.com
Page 2
Absolute Maximum Rating at 25oC (Note 1)
Product
Emission
Color
Pd (mW)
IF (mA)
IFP* (mA)
VR (V)
TOP (oC)
TST (oC)
IN-S85ATYG
Yellow Green
75
25
70
5
-30oC~+85oC
-40oC~+90oC
IN-S85ATY
Yellow
IN-S85ATA
Amber
IN-S85ATR
Red
IN-S85AT5B
Blue
75
25
100
IN-S85ATG
Green
IN-S85AT5UW
White
Notes
1. Condition for IFP is pulse of 1/10 duty and 0.1msec width
ESD Precaution
ATTENTION: Electrostatic Discharge (ESD) protection
The symbol above denotes that ESD precaution is needed. ESD protection for GaP and AlGaAs based chips is necessary even
though they are relatively safe in the presence of low static-electric discharge. Parts built with AlInGaP, GaN, or/and InGaN based
chips are STATIC SENSITIVE devices. ESD precaution must be taken during design and assembly.
If manual work or processing is needed, please ensure the device is adequately protected from ESD during the process.
Please be advised that normal static precautions should be taken in the handling and assembly of this device to prevent damage or degradation which
may be induced by electrostatic discharge (ESD).
IN-S85AT series
Top View SMD LED 0805 PCB Type
Inolux Corporation
Proprietary & Confidential
February, 13, 2019
www.inolux-corp.com
Page 3
Electrical Characteristics TA = 25°C (Note 1)
Product
Emission
Color
IF(mA)
VF(V)
λ(nm)
Viewing
Angel
I*V(mcd)
min
max
λD
λP
△λ
2θ1/2
typ.
IN-S85ATYG
Yellow Green
20
1.8
2.6
572
576
15
120
45
IN-S85ATY
Yellow
20
1.8
2.6
592
594
15
120
115
IN-S85ATA
Amber
20
1.8
2.6
605
610
20
120
80
IN-S85ATR
Red
20
1.8
2.6
625
630
20
120
140
IN-S85AT5B
Blue
5
2.6
3.4
470
473
30
120
80
IN-S85ATG
Green
20
2.8
3.6
520
528
35
120
600
IN-S85AT5UW
White
5
2.6
3.4
X=0.29
Y=0.29
-
-
120
180
Notes
1. Performance guaranteed only under conditions listed in above tables.
IN-S85AT series
Top View SMD LED 0805 PCB Type
Inolux Corporation
Proprietary & Confidential
February, 13, 2019
www.inolux-corp.com
Page 8
Typical Characteristic Curves – Radiation Pattern
Ordering Information
Product
Emission Color
Technolog
y
Test Current
IF (mA)
Luminous Intensity
IV (mcd)
(Typ.)
Forward
Voltage
VF (V)
(Typ.)
Orderable
Part Number
IN-S85ATYG
Yellow Green
AllnGaP
20
45
2.0
IN-S85ATYG
IN-S85ATY
Yellow
AllnGaP
20
115
2.0
IN-S85ATY
IN-S85ATA
Amber
AllnGaP
20
80
2.0
IN-S85ATA
IN-S85ATR
Red
AllnGaP
20
140
2.2
IN-S85ATR
IN-S85AT5B
Blue
InGaN
5
80
3.0
IN-S85AT5B
IN-S85ATG
Green
InGaN
20
600
3.2
IN-S85ATG
IN-S85AT5UW
White
InGaN
5
180
3.0
IN-S85AT5UW
IN-S85AT series
Top View SMD LED 0805 PCB Type
Inolux Corporation
Proprietary & Confidential
February, 13, 2019
www.inolux-corp.com
Page 9
Label Specifications
Inolux P/N:
I
N
-
S
8
5
A
T
X
-
X
X
X
X
Inolux
SMD
Material
Package
Variation
Orientation
Current
Lens
Color
Customized
Stamp-off
S = PCB
Type
85A = 2.0 x 1.25 x 1.1mm
T = Top
Mount
(Blank) =
20mA
5-5mA
(Blank) = Clear
U = Diffused
R=630nm
A=610nm
Y=594nm
YG=576nm
G=528nm
B=473nm
W=White
Lot No.:
Z
2
0
1
7
01
24
001
Internal
Tracker
Year (2017, 2018, …..)
Month
Date
Serial
IN-S85AT series
Top View SMD LED 0805 PCB Type
Inolux Corporation
Proprietary & Confidential
February, 13, 2019
www.inolux-corp.com
Page 11
Packing Dimension
5 boxes per carton are available depending on shipment quantity.
Specification
Material
Quantity
Carrier tape
Per EIA 481-1A specs
Conductive black tape
3000pcs per reel
Reel
Per EIA 481-1A specs
Conductive black
Label
IN standard
Paper
Packing bag
220x240mm
Aluminum laminated bag/ no-zipper
One reel per bag
Carton
IN standard
Paper
Non-specified
Others:
Each immediate box consists of 5 reels. The 5 reels may not necessarily have the same lot number or the same
bin combinations of Iv, λD and Vf. Each reel has a label identifying its specification; the immediate box consists
of a product label as well.
IN-S85AT series
Top View SMD LED 0805 PCB Type
Inolux Corporation
Proprietary & Confidential
February, 13, 2019
www.inolux-corp.com
Page 12
Dry Pack
All SMD optical devices are MOISTURE SENSITIVE. Avoid exposure to moisture at all times during
transportation or storage. Every reel is packaged in a moisture protected anti-static bag. Each bag is properly
sealed prior to shipment.
Upon request, a humidity indicator will be included in the moisture protected anti-static bag prior to shipment.
The packaging sequence is as follows:
Reflow Soldering
• Recommended tin glue specifications: melting temperature in the range of 178~192 OC
• The recommended reflow soldering profile is as follows (temperatures indicated are as measured on
the surface of the LED resin):
Lead-free Solder Profile
IN-S85AT series
Top View SMD LED 0805 PCB Type
Inolux Corporation
Proprietary & Confidential
February, 13, 2019
www.inolux-corp.com
Page 13
Precautions
• Avoid exposure to moisture at all times during transportation or storage.
• Anti-Static precaution must be taken when handling GaN, InGaN, and AlInGaP products.
• It is suggested to connect the unit with a current limiting resistor of the proper size. Avoid applying a
reverse voltage.
• Avoid operation beyond the limits as specified by the absolute maximum ratings.
• Avoid direct contact with the surface through which the LED emits light.
• If possible, assemble the unit in a clean room or dust-free environment.
Reworking
• Rework should be completed within 5 seconds under 260 OC.
• The iron tip must not come in contact with the copper foil.
• Twin-head type is preferred.
Cleaning
Following are cleaning procedures after soldering:
• An alcohol-based solvent such as isopropyl alcohol (IPA) is recommended.
• Temperature x Time should be 50oC x 30sec. or <30oC x 3min
• Ultra sonic cleaning: < 15W/ bath; bath volume ≤ 1liter
• Curing: 100 OC max, <3min
Cautions of Pick and Place
• Avoid stress on the resin at elevated temperature.
• Avoid rubbing or scraping the resin by any object.
• Electro-static may cause damage to the component. Please ensure that the equipment is properly
grounded. Use of an ionizer fan is recommended.
IN-S85AT series
Top View SMD LED 0805 PCB Type
Inolux Corporation
Proprietary & Confidential
February, 13, 2019
www.inolux-corp.com
Page 14
Reliability
Item
Frequency/ lots/ samples/
failures
Standards
Reference
Conditions
Precondition
For all reliability
monitoring tests according
to JEDEC Level 2
J-STD-020
1.) Baking at 85°C for 24hrs
2.) Moisture storage at 85°C/ 60% R.H. for
168hrs
Solderability
1Q/ 1/ 22/ 0
JESD22-B102-B
And CNS-5068
Accelerated aging 155°C/ 24hrs
Tinning speed: 2.5+0.5cm/s
Tinning: A: 215°C/ 3+1s or B: 260°C/ 10+1s
Resistance to
soldering heat
CNS-5067
Dipping soldering terminal only
Soldering bath temperature
A: 260+/-5°C; 10+/-1s
B: 350+/-10°C; 3+/-0.5s
Operating life test
1Q/ 1/ 40/ 0
CNS-11829
1.) Precondition: 85°C baking for 24hrs
85°C/ 60%R.H. for 168hrs
2.) Tamb25°C; IF=20mA; duration 1000hrs
High humidity,
high temperature
bias
1Q/ 1/ 45/ 0
JESD-A101-B
Tamb: 85°C
Humidity: 85% R.H., IF=5mA
Duration: 1000hrs
High temperature
bias
1Q/ 1/ 20
IN specs.
Tamb: 55°C
IF=20mA
Duration: 1000hrs
Pulse life test
1Q/ 1/ 40/ 0
Tamb25°C, If=20mA,, Ip=100mA, Duty
cycle=0.125 (tp=125μs,T=1sec)
Duration 500hrs)
Temperature
cycle
1Q/ 1/ 76/ 0
JESD-A104-A
IEC 68-2-14, Nb
A cycle: -40 degree C 15min; +85 degree C
15min
Thermal steady within 5 min..
300 cycles
2 chamber/ Air-to-air type
High humidity
storage test
1Q/ 1/ 40/ 0
CNS-6117
60+3°C
90+5/-10% R.H. for 500hrs
High temperature
storage test
1Q/ 1/ 40/ 0
CNS-554
100+10°C for 500hrs
Low temperature
storage test
1Q/ 1/ 40/ 0
CNS-6118
-40+5°C for 500hrs
IN-S85AT series
Top View SMD LED 0805 PCB Type
Inolux Corporation
Proprietary & Confidential
February, 13, 2019
www.inolux-corp.com
Page 15
Revision History
Changes since last revision
Page
Version No.
Revision Date
Initial Release
V1.0
02-07-2017
Update
10,11
V1.1
02-13-2019
DISCLAIMER
INOLUX reserves the right to make changes without further notice to any products herein to improve reliability, function or design. INOLUX does not
assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent
rights, nor the rights of others.
LIFE SUPPORT POLICY
INOLUX’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the
President of INOLUX or INOLUX CORPORATION. As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to
result in a significant injury of the user.
2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or system, or to affect its safety or effectiveness.
