SPECIFICATION * Samsung P/N : CL21F684ZOANNNC , -20+80%, 16V, Y5V, 0805 * Descriptiont : CAP, 680 * Supplier : Samsung electro-mechanics * Product : Multi-layer Ceramic Capacitor A. Samsung Part Number Series Size Dielectric Capacitance Capacitance tolerance Rated Voltage Thickness CL 21 F 684 Z O A N N N C Samsung Multi-layer Ceramic Capacitor 0805 (inch code) L: 2.0 0.1 mm 1.25 0.1 W: Inner electrode Termination Y5V 680 -20/+80 % Ni Cu Sn 100% Plating 16 V 0.65 0.1 mm mm (Pb Free) Product Special Normal Packaging Cardboard Type, 7" reel Reserved for future use B. Samsung Reliablility Test and Judgement condition Performance 1.00.2Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 100Mohm Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (x10) 250% of the rated voltage Voltage mechanical breakdown Temperature Y5V Characterisitcs Adhesive Strength (From -30 to 85, Capacitance change shoud be within -82~+22%) No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan (DF) Insulation Within specified tolerance Test condition 110% Capacitance 0.07 max. within 30% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 20% Solder pot : 2705, 101sec. Performance Vibration Test Capacitance change : within 20% Test condition Amplitude : 1.5mm Tan , IR : initial spec. From 10 to 55 (return : 1min.) Moisture Capacitance change : 2hours x 3 direction (x, y, z) With rated voltage Resistance Tan : IR : 0.09 max 402, 90~95%RH, 500+12/-0hrs 500Mohm or 25Mohm Whichever is Smaller High Temperature Capacitance change : Resistance Tan : IR : within 30% within 30% 0.09 max Capacitance change : Cycling Tan , IR : initial spec. of the rated voltage Max. operating temperature 1000Mohm or 50Mohm Whichever is Smaller Temperature With 200% within 20% 1000+48/-0hrs 1 cycle condition Min. operating temperature 25 Max. operating temperature 25 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.