GS60A12-P1J - MEAN WELL ENTERPRISES

SPECIFICATION

ORDER NO.

SAFETY MODEL NO.

DC VOLTAGE Note.2

RATED CURRENT

CURRENT RANGE

RATED POWER (max.)

RIPPLE & NOISE (max.) Note.3

OUTPUT

SETUP, RISE TIME Note.6

HOLD UP TIME (Typ.)

VOLTAGE RANGE Note.7

FREQUENCY RANGE

EFFICIENCY (Typ.)

AC CURRENT (Typ.)

INPUT

ENVIRONMENT

INRUSH CURRENT (max.)

LEAKAGE CURRENT(max.)

SAFETY STANDARDS

SAFETY &

EMC

(Note. 8)

WORKING TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSION

OTHERS

NOTE

PACKING

PROTECTION

GS60A05

GS60A05-P1J GS60A07-P1J GS60A09-P1J GS60A12-P1J GS60A15-P1J GS60A18-P1J GS60A24-P1J GS60A48-P1J

7.5V

GS60A07

GS60A09

12V

GS60A12

15V

GS60A15

18V

GS60A18

24V

GS60A24

48V

GS60A48

100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p

VOLTAGE TOLERANCE Note.4

LINE REGULATION Note.5

LOAD REGULATION

±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±3.0% ±2.5%

±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%

±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±3.0% ±2.5%

90 ~ 264VAC 135 ~ 370VDC

47 ~ 63Hz

81% 85.5% 87.5% 88% 88.5% 88.5% 90% 92%

1.4A / 115VAC 1A / 230VAC

65A / 230VAC

0.75mA / 240VAC

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃

711K hrs min. MIL-HDBK-217F(25 )℃

-30 ~ +60 (Refer to "Derating Curve")℃

20% ~ 90% RH non-condensing

-40 ~ +85 , 10 ~ 95% RH℃

±℃℃0.03% / (0 ~ 40 )

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

125*50*31.5mm (L*W*H)

0.305Kg; 40pcs/13.02Kg/1.05CUFT

CONNECTOR

PLUG

CABLE See page 2 ; Other type available by customer requested

See page 2 ; Other type available by customer requested

1. All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. ℃

2. DC voltage: The output voltage set at point measure by plug terminal & 50% load.

3. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.

4. Tolerance: includes set up tolerance, line regulation, load regulation.

5. Line regulation is measured from low line to high line at rated load.

6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.

7. Derating may be needed under low input voltages. Pleas check the derating curve for more details.

8. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the

EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.

(as available on http://www.meanwell.com)

60WAC-DC Industrial Adaptor GS60 series

Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A

Compliance to EN55032 class B, EN61000-3-2,3, FCC PART 15 / CISPR22 class B, GB9254, GB17625.1

OVERLOAD

OVER VOLTAGE

OVER TEMPERATURE

105 ~ 150% rated output power

Protection type : Hiccup mode, recovers automatically after fault condition is removed

Shut down o/p voltage, re-power on to recover

6A 6A 6A 5A 4A 3.33A 2.5A 1.25A

0 ~ 6A 0 ~ 6A 0 ~ 6A 0 ~ 4A 0 ~ 3.33A 0 ~ 2.5A

0 ~ 1.25A

30W 45W 54W 60W

0 ~ 5A

60W 60W 60W 60W

Protection type : Shut down o/p voltage, re-power on to recover

UL60950-1, CSA C22.2, TUV EN60950-1, CCC GB4943, approved

PSE J60950-1

1000ms, 30ms / 230VAC 1000ms, 30ms / 115VAC at full load

50ms / 230VAC 15ms / 115VAC at full load

7.88 ~ 10.13V 9.45 ~ 12.15V 12.6 ~ 16.2V 15.75 ~ 20.25V 18.9 ~ 24.3V 25.2 ~ 32.4V 50.4 ~ 64.8V

5.25 ~ 6.75V

EMC IMMUNITY

EMC EMISSION

File Name:GS60-SPEC 2017-07-07

Universal AC input / Full range

No load power consumption<0.3W

Energy efficiency Level Ⅴ

Comply with EISA 2007, NRCan, AU/NZ MEPS and EU ErP

3 pole AC inlet IEC320-C14

Class power (with earth pin)I

Protections: Short circuit / Overload / Over voltage / Over temperature

Pass LPS

Fully enclosed plastic case

LED indicator for power on

2 years warranty

■Features :