SmartPro 120V 1.5kVA 1kW Line-Interactive Sine
Wave UPS, 2U Rack/Tower, LCD, USB, DB9, 8
Outlets
MODEL NUMBER: SMC15002URM
Description
The SMC15002URM SmartPro 120V 1.5kVA 1kW Line-Interactive Sine Wave UPS provides battery backup and AC power protection against blackouts,
brownouts, power surges and line noise that can damage electronics or destroy data. Ideal for backing up high-performance workstations, servers and network
equipment, the SMC15002URM switches to battery mode in milliseconds to keep your connected equipment running long enough to save files and shut down
safely with no data loss. Pure sine wave output is compatible with active power factor correction (PFC) power supplies.
Featuring eight NEMA 5-15R outlets and a 10-foot power cord with 120V NEMA 5-15P input, the SMC15002URM has an internal battery that provides 17.7
minutes of support at half load and 6.5 minutes at full load. A front-panel LCD screen lets you configure settings and monitor operating data, such as load
level, voltage, battery charge and estimated runtimes.
Automatic voltage regulation (AVR) maintains 120V nominal output over an input range of 83V to 147V without using battery power. EMI/RFI noise filtering
improves your equipment’s performance and prevents damage. A 570-joule surge suppression rating protects your equipment from harmful power surges.
With Tripp Lite’s free downloadable PowerAlert software, SMC15002URM enables safe unattended system shutdown and file saves in case of a prolonged
power failure.
Features
Protects Mission-Critical Electronic Equipment
Provides fully regulated pure sine wave AC output compatible with active PFC power supplies
Audible alarm signals loss of utility power, overload and low battery
8 NEMA 5-15R outlets
10 ft. power cord with 120V NEMA 5-15P input
570-joule surge suppression rating
Reliable Battery Backup
Supports half load up to 17.7 min. and full load up to 6.5 min.
Highlights
Corrects under- and overvoltages
from 83V to 147V
8 NEMA 5-15R outlets
Monitoring of power conditions
via POWERALERT12
Interactive LCD monitoring screen
17.7 min. runtime at half load; 6.5
min. at full load
Package Includes
SMC15002URM SmartPro 120V
1.5kVA 1kW Line-Interactive Sine
Wave UPS
USB cable
UPSHDEARKIT mounting
hardware
Owner’s manual
1 / 6
Internal batteries designed for hot-swap field replacement
94% line-power efficiency rating saves money in energy costs
Automatic Voltage Regulation (AVR)
Maintains 120V nominal output over input range of 83V–147V without using battery power
EMI/RFI Line Noise Filtering
Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s performance
Interactive LCD Screen
Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes
Supports multiple advanced user setup and operating preferences
Rotates for easy viewing in rack-mount or tower configurations
Communications Ports
USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from
www.tripplite.com/poweralert
EPO port supports emergency shutdown in large facilities
Versatile Installation Options
UPSHDEARKIT 2- and 4-post hardware included for front-vertical-rail mounting in 2U of EIA-standard 19 in. rack
Mounts on wall with optional 2POSTRMKITWM
Mounts in upright tower position with optional 2-9USTAND
Mounts with extra front-to-rear support in 4-post racks with optional 4POSTRAILKIT
Specifications
OUTPUT
Output Volt Amp Capacity (VA) 1500
Output kVA Capacity (kVA) 1.5
Output Watt Capacity (Watts) 1000
Output kW Capacity (kW) 1.0
Nominal Output Voltage(s)
Supported 110V; 115V; 120V
Nominal Voltage Details 120v nominal output in battery mode
Frequency Compatibility 60 Hz
Output Voltage Regulation (Line
Mode) -21%, +8%
Output Voltage Regulation (Battery
Mode) +/- 5%
Output Receptacles (8) 5-15R
2 / 6
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery Mode) Pure Sine wave
INPUT
Rated input current (Maximum Load) 12A
Nominal Input Voltage(s) Supported 120V AC
UPS Input Connection Type 5-15P
Input Circuit Breakers 15A
UPS Input Cord Length (ft.) 10
UPS Input Cord Length (m) 3.0
Recommended Electrical Service 15A 120V
Input Phase Single-Phase
BATTERY
Full Load Runtime (min.) 6.5 min. (1000w)
Half Load Runtime (min.) 17.7 min. (500w)
DC System Voltage (VDC) 36
Battery Recharge Rate (Included
Batteries) Less than 4.5 hours from 10% to 90% (typical, full load discharge)
Internal UPS Replacement Battery
Cartridge RBC93-2U
Battery Access Front panel battery access door
Battery Replacement Description Hot-swappable, user replaceable batteries
Expandable Runtime No
VOLTAGE REGULATION
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147
Overvoltage Correction Input voltages between 128 and 147 are reduced by 12%
Undervoltage Correction Input voltages between 83 and 107 are boosted by 14%
USER INTERFACE, ALERTS & CONTROLS
Front Panel LCD Display Front panel LCD information and configuration screen offers detailed UPS and site power status and operating
data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual
for detailed LCD configuration and monitoring options)
Switches 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
Alarm Cancel Operation Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option
available
Audible Alarm Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
3 / 6
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating 570
UPS AC Suppression Response
Time Instantaneous
EMI / RFI AC Noise Suppression Yes
PHYSICAL
Included Mounting Accessory
Description Includes UPSHDEARKIT for 2 point front-mount and 2 point center-mount rackmount installation in 2 and 4 post
racks, plus wallmount installation
Installation Form Factors Supported
with Optional Accessories 4 post rackmount(4POSTRAILKIT); Tower(2-9USTAND); Wallmount(2POSTRMKITWM)
Primary Form Factor Rackmount
UPS Power Module Dimensions
(hwd, in.) 3.45 x 17.3 x 13.45
UPS Power Module Dimensions
(hwd, cm) 8.76 x 43.94 x 34.16
Rack Height (U Spaces) 2
Minimum Required Rack Depth
(inches) 16.5
Minimum Required Rack Depth (cm) 41.91
UPS Power Module Weight (lbs.) 46.5
UPS Power Module Weight (kg) 21.09
UPS Shipping Dimensions (hwd / in.) 8.8 x 20 x 23.5
UPS Shipping Dimensions (hwd /
cm) 22.35 x 50.80 x 59.69
Shipping Weight (lbs.) 58.5
Shipping Weight (kg) 26.6
Cooling Method Fan
UPS Housing Material Steel
Minimum Required Rack Depth (mm) 419
Primary UPS Height (mm) 88
Primary UPS Width (mm) 439
Primary UPS Depth (mm) 342
Shipping Height (mm) 224
Shipping Width (mm) 508
Shipping Depth (mm) 597
ENVIRONMENTAL
4 / 6
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load) 223
Battery Mode BTU / Hr. (Full Load) 650
AC Mode Efficiency Rating (100%
Load) 94%
Operating Elevation (ft.) 0-3000M (0-10,000 Ft)
Audible Noise 45 dBA max at 1m frontside
Operating Elevation (m) 0 - 3000 m
COMMUNICATIONS
Communications Interface DB9 Serial; EPO (emergency power off); USB
Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions
PowerAlert Software For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at
http://www.tripplite.com/poweralert
Communications Cable USB cabling included
WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
Network UPS Tools Compatibility NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at
http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite
LINE / BATTERY TRANSFER
Transfer Time 5 milliseconds (AC to battery), 1 milliseconds (Battery to AC)
Low Voltage Transfer to Battery
Power (Setpoint) 83
High Voltage Transfer to Battery
Power (Setpoint) 147
SPECIAL FEATURES
Grounding Lug Back panel grounding lug
Cold Start (Startup in Battery Mode
During a Power Failure) Cold-start operation supported
High Availability UPS Features Hot swappable batteries
CERTIFICATIONS
UPS Certifications Meets FCC Part 15 Category A (EMI); Tested to CSA (Canada); Tested to NOM (Mexico); Tested to UL1778 (USA)
WARRANTY
Product Warranty Period (Worldwide) 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
5 / 6
Connected Equipment Insurance
(U.S., Canada & Puerto Rico) $250,000 Ultimate Lifetime Insurance
© 2017 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
6 / 6
