SmartPro 120V 1.5kVA 1kW Line-Interactive Sine Wave UPS, 2U Rack/Tower, LCD, USB, DB9, 8 Outlets Highlights Corrects under- and overvoltages from 83V to 147V 8 NEMA 5-15R outlets Monitoring of power conditions MODEL NUMBER: SMC15002URM via POWERALERT12 Interactive LCD monitoring screen 17.7 min. runtime at half load; 6.5 min. at full load Package Includes SMC15002URM SmartPro 120V 1.5kVA 1kW Line-Interactive Sine Wave UPS USB cable UPSHDEARKIT mounting hardware Owner's manual Description The SMC15002URM SmartPro 120V 1.5kVA 1kW Line-Interactive Sine Wave UPS provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. Ideal for backing up high-performance workstations, servers and network equipment, the SMC15002URM switches to battery mode in milliseconds to keep your connected equipment running long enough to save files and shut down safely with no data loss. Pure sine wave output is compatible with active power factor correction (PFC) power supplies. Featuring eight NEMA 5-15R outlets and a 10-foot power cord with 120V NEMA 5-15P input, the SMC15002URM has an internal battery that provides 17.7 minutes of support at half load and 6.5 minutes at full load. A front-panel LCD screen lets you configure settings and monitor operating data, such as load level, voltage, battery charge and estimated runtimes. Automatic voltage regulation (AVR) maintains 120V nominal output over an input range of 83V to 147V without using battery power. EMI/RFI noise filtering improves your equipment's performance and prevents damage. A 570-joule surge suppression rating protects your equipment from harmful power surges. With Tripp Lite's free downloadable PowerAlert software, SMC15002URM enables safe unattended system shutdown and file saves in case of a prolonged power failure. Features Protects Mission-Critical Electronic Equipment Provides fully regulated pure sine wave AC output compatible with active PFC power supplies Audible alarm signals loss of utility power, overload and low battery 8 NEMA 5-15R outlets 10 ft. power cord with 120V NEMA 5-15P input 570-joule surge suppression rating Reliable Battery Backup Supports half load up to 17.7 min. and full load up to 6.5 min. 1/6 Internal batteries designed for hot-swap field replacement 94% line-power efficiency rating saves money in energy costs Automatic Voltage Regulation (AVR) Maintains 120V nominal output over input range of 83V-147V without using battery power EMI/RFI Line Noise Filtering Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance Interactive LCD Screen Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes Supports multiple advanced user setup and operating preferences Rotates for easy viewing in rack-mount or tower configurations Communications Ports USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert EPO port supports emergency shutdown in large facilities Versatile Installation Options UPSHDEARKIT 2- and 4-post hardware included for front-vertical-rail mounting in 2U of EIA-standard 19 in. rack Mounts on wall with optional 2POSTRMKITWM Mounts in upright tower position with optional 2-9USTAND Mounts with extra front-to-rear support in 4-post racks with optional 4POSTRAILKIT Specifications OUTPUT Output Volt Amp Capacity (VA) 1500 Output kVA Capacity (kVA) 1.5 Output Watt Capacity (Watts) 1000 Output kW Capacity (kW) 1.0 Nominal Output Voltage(s) Supported 110V; 115V; 120V Nominal Voltage Details 120v nominal output in battery mode Frequency Compatibility 60 Hz Output Voltage Regulation (Line Mode) -21%, +8% Output Voltage Regulation (Battery Mode) +/- 5% Output Receptacles (8) 5-15R 2/6 Output AC Waveform (AC Mode) Sine wave Output AC Waveform (Battery Mode) Pure Sine wave INPUT Rated input current (Maximum Load) 12A Nominal Input Voltage(s) Supported 120V AC UPS Input Connection Type 5-15P Input Circuit Breakers 15A UPS Input Cord Length (ft.) 10 UPS Input Cord Length (m) 3.0 Recommended Electrical Service 15A 120V Input Phase Single-Phase BATTERY Full Load Runtime (min.) 6.5 min. (1000w) Half Load Runtime (min.) 17.7 min. (500w) DC System Voltage (VDC) 36 Battery Recharge Rate (Included Batteries) Less than 4.5 hours from 10% to 90% (typical, full load discharge) Internal UPS Replacement Battery Cartridge RBC93-2U Battery Access Front panel battery access door Battery Replacement Description Hot-swappable, user replaceable batteries Expandable Runtime No VOLTAGE REGULATION Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147 Overvoltage Correction Input voltages between 128 and 147 are reduced by 12% Undervoltage Correction Input voltages between 83 and 107 are boosted by 14% USER INTERFACE, ALERTS & CONTROLS Front Panel LCD Display Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) Switches 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions Alarm Cancel Operation Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available Audible Alarm Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions 3/6 SURGE / NOISE SUPPRESSION UPS AC Suppression Joule Rating 570 UPS AC Suppression Response Time Instantaneous EMI / RFI AC Noise Suppression Yes PHYSICAL Included Mounting Accessory Description Includes UPSHDEARKIT for 2 point front-mount and 2 point center-mount rackmount installation in 2 and 4 post racks, plus wallmount installation Installation Form Factors Supported with Optional Accessories 4 post rackmount(4POSTRAILKIT); Tower(2-9USTAND); Wallmount( 2POSTRMKITWM) Primary Form Factor Rackmount UPS Power Module Dimensions (hwd, in.) 3.45 x 17.3 x 13.45 UPS Power Module Dimensions (hwd, cm) 8.76 x 43.94 x 34.16 Rack Height (U Spaces) 2 Minimum Required Rack Depth (inches) 16.5 Minimum Required Rack Depth (cm) 41.91 UPS Power Module Weight (lbs.) 46.5 UPS Power Module Weight (kg) 21.09 UPS Shipping Dimensions (hwd / in.) 8.8 x 20 x 23.5 UPS Shipping Dimensions (hwd / cm) 22.35 x 50.80 x 59.69 Shipping Weight (lbs.) 58.5 Shipping Weight (kg) 26.6 Cooling Method Fan UPS Housing Material Steel Minimum Required Rack Depth (mm) 419 Primary UPS Height (mm) 88 Primary UPS Width (mm) 439 Primary UPS Depth (mm) 342 Shipping Height (mm) 224 Shipping Width (mm) 508 Shipping Depth (mm) 597 ENVIRONMENTAL 4/6 Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius Relative Humidity 0 to 95%, non-condensing AC Mode BTU / Hr. (Full Load) 223 Battery Mode BTU / Hr. (Full Load) 650 AC Mode Efficiency Rating (100% Load) 94% Operating Elevation (ft.) 0-3000M (0-10,000 Ft) Audible Noise 45 dBA max at 1m frontside Operating Elevation (m) 0 - 3000 m COMMUNICATIONS Communications Interface DB9 Serial; EPO (emergency power off); USB Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions PowerAlert Software For local monitoring via the UPS's built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert Communications Cable USB cabling included WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications Network UPS Tools Compatibility NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite LINE / BATTERY TRANSFER Transfer Time 5 milliseconds (AC to battery), 1 milliseconds (Battery to AC) Low Voltage Transfer to Battery Power (Setpoint) 83 High Voltage Transfer to Battery Power (Setpoint) 147 SPECIAL FEATURES Grounding Lug Back panel grounding lug Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported High Availability UPS Features Hot swappable batteries CERTIFICATIONS UPS Certifications Meets FCC Part 15 Category A (EMI); Tested to CSA (Canada); Tested to NOM (Mexico); Tested to UL1778 (USA) WARRANTY Product Warranty Period (Worldwide) 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty. 5/6 Connected Equipment Insurance (U.S., Canada & Puerto Rico) $250,000 Ultimate Lifetime Insurance (c) 2017 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies: https://www.tripplite.com/products/product-certification-agencies 6/6 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Tripp Lite: SMC15002URM