PBA000009 - Pericom - Product.Network

All specifications are subject to change without notice. PB 3.3V REV2008_DEC22_01.6

SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.saronix-ecera.com

3.3V PECL Low Jitter XO

PB Series Crystal Clock Oscillator (XO)

7.0 x 5.0mm

Product Features

38.88 to 162 MHz Frequency Range •

<1 ps RMS jitter with non-PLL design•

Designed for standard reflow & washing •

techniques

IBIS models available•

Pb-free & RoHS/Green compliant•

Product Description

The PB Series 3.3V crystal clock oscillator

achieves superb jitter and stability over a broad

range of operating conditions and frequencies.

The output clock signal, generated internally

with a non-PLL oscillator design, is compatible

with LVPECL logic levels. The device, available

on tape and reel, is contained in a 7.0 x

5.0mm surface-mount ceramic package.

Applications

The PB Series is ideal for high-speed

applications requiring low jitter, including:

1/10 Gigabit Ethernet•

2/4/10G FibreChannel•

Serial Attached SCSI (SAS)•

Server & Storage platforms•

SONET/SDH linecards•

Passive Optical Network (PON) devices•

HD Video Systems•

Package:

Pin Functions:

Pin Function

1 OE or NC

2 OE or NC

3Ground

4Q Output

5Q Output

Recommended Land Pattern:

7.0 x 5.0mm Ceramic SMD

Part Ordering Information:

PB XXX YYYY A: ProductFamily

B: XXX = FrequencyCode

C: YYYY = SpecificationCode

Following the above format, Saronix-eCera part numbers will be assigned upon

confirmation of exact customer requirements.

All specifications are subject to change without notice. PB 3.3V REV2008_DEC22_01.6

SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.saronix-ecera.com

3.3V PECL Low Jitter XO

PB Series Crystal Clock Oscillator (XO)

7.0 x 5.0mm

Output Enable / Disable Function

Parameter Min. Typ. Max. Units Notes

Input Voltage (pin OE), Output Enable 0.7 V or open

Input Voltage (pin OE), Output Disable (low power standby) 0.3 V Outpus disabled to Hi-Z

Internal Pullup Resistance 50 kΩ

Output Disable Delay 200 ns

Output Enable Delay 10 ms

Electrical Performance

Parameter Min. Typ. Max. Units Notes

Output Frequency 38.88 162 MHz As speciﬁ ed

Supply Voltage 2.97 3.30 3.63 V

Supply Current, enabled 55 88 mA

Supply Current, Disabled 0.03 mA

Frequency Stability ±20 to ±50 ppm See Note 1 below

Operating Temperature Range -20 +70 °C Commercial (standard)

-40 +85 Industrial (standard)

Output Logic 0, VOL VCC - 1.62 V

Output Logic 1, VOH VCC - 1.025 V

Output Load 50Ω connected connected to VCC - 2 V output requires termination

Duty Cycle 45 55 % measured 50% of waveform

Rise and Fall Time 500 850 ps measured 20/80% of waveform

Jitter, Phase 0.5 1 ps RMS (1-σ) 12kHz to 20MHz frequency band

Jitter, Total 25 ps pk–pk 100,000 random periods

Notes:

1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C),

aging (5 year at 40°C average effective ambient temperature), shock and vibration.

2. For speciﬁ cations othere than those listed, please contact sales.

Absolute Maximum Ratings

Parameter Min. Typ. Max. Units Notes

Storage Temperature -55 +125 °C

All specifications are subject to change without notice. PB 3.3V REV2008_DEC22_01.6

SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.saronix-ecera.com

3.3V PECL Low Jitter XO

PB Series Crystal Clock Oscillator (XO)

7.0 x 5.0mm

Reliability Test Ratings

This product is rated to meet the following test conditions:

Type Parameter Test Condition

Mechanical Shock MIL-STD-883, Method 2002, Condition B

Mechanical Solderability JESD22-B102-D Method 2 (Preconditioning E)

Mechanical Terminal strength MIL-STD-883, Method 2004, Condition D

Mechanical Gross leak MIL-STD-883, Method 1014, Condition C

Mechanical Fine leak MIL-STD-883, Method 1014, Condition A2 (R1 = 2x10-8 atm cc/s)

Mechanical Solvent resistance MIL-STD-202, Method 215

Environmental Thermal shock MIL-STD-883, Method 1011, Condition A

Environmental Moisture resistance MIL-STD-883, Method 1004

Environmental Vibration MIL-STD-883, Method 2007, Condition A

Environmental Resistance to soldering heat J-STD-020C Table 5-2 Pb-free devices (2 cycles max)

Test Circuit

Voltage Control Function

Output Enable/Disable Function

6 5 4

1 2 3

507 507

Test Point

(Termination

internal to scope)

+2.0V

-1.3V

Z = 507

0.1μF 0.01μF

Reﬂ ow Soldering Proﬁ le

Peak 260°C for 10 sec max

260

Temperature – °C

1 to 3°C/sec max

60 to 90 sec

Time

1 to 3°C/sec

217

4 to 6 minutes max

As per IPC/JEDEC J-STD-020C

All specifications are subject to change without notice. PB 3.3V REV2008_DEC22_01.6

SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.saronix-ecera.com

3.3V PECL Low Jitter XO

PB Series Crystal Clock Oscillator (XO)

7.0 x 5.0mm

Output Waveform