922A05C1C - REMtech - Product.Network

HGWM Series Mercury-Wetted Reed Relays

Feature maintenance-free long life for billions of bounce-free operations.

Contact Rating: 100 VA maximum; 500 VDC or peak AC, maximum; 2 amp

switched maximum, 5 amp maximum carry current. Contact Circuit

Resistance: 30 m½ maximum; stable with ±2 m½ over life. Life Expectancy:

greater than 20 ´ 10

operations at rated load with proper contact protection.

Operate and Release Time: 1.25 ms, maximum. Bounce Time: None.

Breakdown Voltage: Coil-to-contact and across contacts 1000 VAC, rms,

minimum or 1400 VDC; 60 Hz between all mutually insulated terminals.

Insulation Resistance: 1000 m½ minimum. Operating Temperature Range:

Ð38.8¡ to +85¡C. No interruption of signal or processing of false signals.

Excellent input to output isolation. Mount on standard 0.100" (2.54) grid

pattern; upright within 30¡ of vertical. 1 Form C, SPDT. FCC 68 qualified.

SPDT Single-Side Stable

681-0035 MSS21A05 5 140.0 178 3.75 0.5 11.00 9.75 8.13 7.28

681-0040 MSS21A12 12 500.0 288 9.00 1.0 21.00 9.75 8.13 7.28

681-0045 MSS21A24 24 2150.0 268 18.00 2.0 44.00 10.79 8.99 8.05

681-1102 MSS71A05 5 140.0 178 3.75 0.5 11.00 10.24 8.53 7.64

681-1103 MSS71A12 12 500.0 288 9.00 1.0 21.00 10.24 8.53 7.64

681-1104 MSS71A24 24 2150.0 268 18.00 2.0 43.00 11.30 9.42 8.43

Solid State Switches and Relays, Reed Relays

For Fast, Dependable Service, Make Just One Call Ñ 1-800-433-5700 ALLIED

145

Schematic

Stock Mfr.'s Nominal Coil Resistance Nominal Input Must Operate Must Release Maximum

Contact Form

No. Type Voltage (VDC) (Ohms ±10%) Power (mW) Voltage (VDC) Voltage (VDC) Voltage (VDC)

(Bottom View)

EACH

1-24 25-49 50-99

Series MSS2 Mercury Wetted

Molded Construction for Compatibility with Automatic Board Processing

Automatic Insertion Capability

Diode and Electrostatic Shield Options Available

UL, VDE Versions Available on Some Models

Miniature, Cost-Effective Switching Solutions

State-of-the-Art Capsule Designs

Standard Nominal-Coil Voltages Include 5, 12 and 24 Volts

MRB and 922 1 ´0.1 Inch Grid Relays HGJ2MT Series Mercury-Wetted

Reed Relays

2 form C, DPDT relays feature the same electrical characteristics as the HGJM series

relays, except they are shielded and insulation resistance is 10,000 m½, minimum.

Common Open Time Durations: 50 µ minimum at 100 Hz for capacitor transfer

technique applications. Excellent input to output isolation and electrostatic shielding.

0.400" (10.16) High Sensitivity Single-Side Stable With Shield

MRB Series units have rhodium contacts rated 10 VA switching power, 200 VDC or peak AC switching voltage, and 0.5 A

switching current. Contact Resistance: 200 ½. Life Expectancy: 100 ´10

. Breakdown Voltage: Coil to contact

1000 Vrms, 1400 VDC; across contacts 175 Vrms, 250 VDC. Operate and Release Time: 2.0 ms, max. Insulation

Resistance: 10

. UL listed, CSA Certified, FCC 68 qualified. 922 Series units have ruthenium contacts rated 3 VA

switching power, 28 VDC or peak AC switching voltage, and 0.25 A switching current. Contact Resistance: 200 m½. Life

Expectancy: 20 ´10

. Breakdown Voltage: Coil to contact 1000 Vrms, 1400 VDC; across contacts 125 Vrms, 175 VDC.

Operate and Release Time: 3.0 ms, max. Insulation Resistance: 10

MRB Series

Stock Mfr.Õs Volts Coil Contact

No. Type DC Ohms Form

EACH

1-24 25-99 100-Up

681-1501 MRB1A05 5 225 1 Form A 3.67 3.60 2.85

681-1502 MRB1A12 12 1400 1 Form A 3.75 3.00 2.78

681-1503 MRB1A24 24 4340 1 Form A 4.18 3.49 3.12

681-1504 MRB2A05 5 105 2 Form A 7.12 5.93 5.31

681-1505 MRB2A12 12 730 2 Form A 7.12 5.93 5.31

681-1506 MRB2A24 24 2500 2 Form A 7.53 6.27 5.62

922 Series

681-1507 922A05C1C 5 200 1 Form C 15.28 12.73 11.44

681-1509 922A24C1C 24 4320 1 Form C 16.10 13.41 12.01

681-1510 922A05C2C 5 100 2 Form C 25.54 21.28 19.06

681-1511 922A12C2C 12 630 2 Form C 25.54 21.28 19.06

681-1512 922A24C2C 24 2520 2 Form C 25.54 21.28 19.06

Stock Mfr.Õs Contact Nom. Coil Coil

No. Type Form VDC Resistance ±10%

EACH

1-24 25-99 100-Up

681-1516 HGWM51111K00 1C 5 117 36.09 30.08 26.94

681-1517 HGWM51111P00 1C 12 720 31.23 26.03 23.31

681-1518 HGWM51111T00 1C 24 2730 32.76 27.30 24.45

681-1513 HGJ2MT54211G00 2C 5 55 70.42 58.68 52.55

681-1514 HGJ2MT54211L00 2C 12 370 59.73 49.78 44.58

681-1515 HGJ2MT54211P00 2C 24 1370 71.03 58.68 52.55

Stock Mfr.Õs Contact Nom. Coil Coil

No. Type Form VDC Resistance ±10%

EACH

1-24 25-99 100-Up

Series CG, CG2,

PMT3 (310)

and PMT8

Engineering PMT 3

AC CG/CG2 PMT8

Specifications (310)

Surge Life (No. of Operations)

10 A 10/1000 surge life Ñ 2500 Ñ 300

500 A 10/1000 surge life Ñ 1000 400 Ñ

Surge Current

8/20 (kA) 10 20 20 10

AC Current

10 operations 60 Hz for 1 sec., Ñ 20 Ñ 10

with 3 minute intervals

AC Current

11 cycles 60 Hz (a) Ñ 20 130 Ñ

Insulation Resistance

100 VDC, except 50 VDC for units 10000 10000 1000 10000

with DC breakdown less than

150 V (MOhms)

Temperature-Stabilize at temp.

for 1 hour then measure DC,

IR, Impulse

Minimum operating temp. Ð40¡C Ð65¡C Ð65¡C Ð40¡C

Maximum operating temp. +125¡C +125¡C +125¡C +125¡C

Weight 2.0 g 1.0 g 3.5 g 2.7 g

Stock Mfr.Õs

No. Type

DC Breakdown Voltage

Nominal

Voltage

(VDC)

Min.

Volts

Max.

Volts 1-24 25-49 50-99

681-0122 CG75L 75 60 90 400 1.0 3.16 2.55 2.13

681-0123 CG90L 90 72 108 400 1.0 3.94 3.18 2.65

681-0125 CG2-145L 145 116 174 500 1.0 3.57 2.88 2.40

681-0126 CG2-230L 230 195 265 600 1.0 3.57 2.88 2.40

681-0127 CG2-300L 300 255 345 700 1.0 3.57 2.88 2.40

681-0128 CG2-350L 350 297 403 750 1.0 3.57 2.88 2.40

681-0129 CG2-470L 470 400 540 850 1.0 3.57 2.88 2.40

681-0130 CG2-600L 600 510 690 1000 1.0 4.27 3.28 2.75

681-0131 CG2-800L 800 680 920 1200 1.0 4.27 3.28 2.75

681-0132 CG2-1000L 1000 850 1150 1500 1.0 3.13 2.40 2.01

681-1301 CG3-1.5L 1500 1200 1800 2200 1.0 5.60 4.76 3.90

681-1302 CG3-7.5L 7500 6375 8625 10000 1.0 5.90 5.02 4.12

681-0133 PMT3(310)25010 250 200 300 600 1.0 6.60 4.80 3.80

681-0134 PMT3(310)40010 400 320 480 750 1.0 5.89 4.28 3.39

681-1215 AC120L Ñ 225 Ñ 700 1.0 3.73 2.91 2.35

681-1220 AC240L Ñ 425 Ñ 800 1.0 3.57 2.78 2.25

681-1221 PMT825010 90 72 113 500 1.0 5.89 4.28 3.39

681-1222 PMT835010 350 280 420 600 1.0 5.89 4.28 3.39

681-1223 PMT840010 350 420 840 750 1.0 5.89 4.28 3.39

Impulse Breakdown

@ (100 V/µs)

Maximum Voltage

Maximum Capacitance

Between Electrodes

@ 1 MHz (pF)

EACH

Clare surge arrestors protect personnel and equipment from damaging high-voltage surges from lightning. Inductive switching, nuclear electromagnetic generation,

or electrostatic discharge. Through ongoing research and engineering improvements, Clare has developed a family of surge arrestors that offer impressive

characteristics for a variety of applications.

Fastest Surge Arresting Response

High Peak Surge Current Capability

Lowest Interelectrode Capacitance

Rugged Ceramic Construction

Available on Tape and Reel for Automatic Insertion for Some Product Types

Hermetically Sealed

Meets the Requirements of REA PE-80, IEEE 587 and CCITT K-12

UL Recognition on Some Products

REMtech