54AC02 Quad 2-Input NOR Gate General Description Features The 'AC02 contains four, 2-input NOR gates. n n n n ICC reduced by 50% on 54AC/74AC02 only Outputs source/sink 24 mA 'ACT02 has TTL-compatible inputs Standard Military Drawing (SMD) -- AC02: 5962-87612 n For Military 54ACT02 device see 54ACTQ02 Logic Symbol IEEE/IEC DS100258-1 Pin Names Description An, Bn Inputs On Outputs Connection Diagrams Pin Assignment for DIP and Flatpak Pin Assignment for LCC DS100258-3 DS100258-2 FACTTM is a trademark of Fairchild Semiconductor Corporation. (c) 1998 National Semiconductor Corporation DS100258 www.national.com 54AC02 Quad 2-Input NOR Gate July 1998 Absolute Maximum Ratings (Note 1) Junction Temperature (TJ) CDIP If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (VCC) DC Input Diode Current (IIK) VI = -0.5V VI = VCC + 0.5V DC Input Voltage (VI) DC Output Diode Current (IOK) VO = -0.5V VO = VCC + 0.5V DC Output Voltage (VO) DC Output Source or Sink Current (IO) DC VCC or Ground Current per Output Pin (ICC or IGND) Storage Temperature (TSTG) 175C Recommended Operating Conditions -0.5V to +7.0V Supply Voltage (VCC) 'AC Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) 54AC Minimum Input Edge Rate (V/t) 'AC Devices VIN from 30% to 70% of VCC VCC @ 3.3V, 4.5V, 5.5V -20 mA +20 mA -0.5V to VCC + 0.5V -20 mA +20 mA -0.5V to to VCC + 0.5V 50 mA 2.0V to 6.0V 0V to VCC 0V to VCC -55C to +125C 125 mV/ns Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACTTM circuits outside databook specifications. 50 mA -65C to +150C DC Characteristics for 'AC Family Devices Symbol Parameter VCC (V) 54AC TA = -55C to +125C Units Conditions Guaranteed Limits VIH VIL VOH Minimum High Level Input Voltage Maximum Low Level Input Voltage Minimum High Level Output Voltage 3.0 2.1 4.5 3.15 5.5 3.85 3.0 0.9 4.5 1.35 5.5 1.65 3.0 2.9 4.5 4.4 5.5 5.4 V VOUT = 0.1V or VCC - 0.1V V VOUT = 0.1V or VCC - 0.1V IOUT = -50 A V (Note 2) VIN = VIL or VIH VOL Maximum Low Level Output Voltage 3.0 2.4 4.5 3.7 5.5 4.7 3.0 0.1 4.5 0.1 5.5 0.1 -12 mA V IOH -24 mA -24 mA IOUT = 50 A V (Note 2) VIN = VIL or VIH 3.0 0.5 4.5 0.5 5.5 0.5 12 mA V IOL 24 mA 24 mA IIN Maximum Input Leakage Current 5.5 1.0 IOLD (Note 3) Minimum Dynamic Output Current 5.5 50 mA VOLD = 1.65V Max 5.5 -50 mA VOHD = 3.85V Min 5.5 40.0 A VIN = VCC or GND IOHD ICC www.national.com Maximum Quiescent Supply Current 2 A VI = VCC, GND DC Characteristics for 'AC Family Devices (Continued) Note 2: All outputs loaded; thresholds on input associated with output under test. Note 3: Maximum test duration 2.0 ms, one output loaded at a time. Note 4: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. ICC for 54AC @ 25C is identical to 74AC @ 25C. AC Electrical Characteristics Parameter Min Max Propagation Delay 3.3 1.0 9.0 5.0 1.5 7.0 3.3 1.0 9.0 5.0 1.5 7.5 Symbol tPLH Propagation Delay tPHL 54AC TA = -55C to +125C CL = 50 pF VCC (V) (Note 5) Units Fig. No. ns ns Note 5: Voltage Range 3.3 is 3.3V 0.3V Voltage Range 5.0 is 5.0V 0.5V Capacitance Typ Units CIN Symbol Input Capacitance Parameter 4.5 pF CPD Power Dissipation Capacitance 30.0 pF 3 Conditions VCC = OPEN VCC = 5.0V www.national.com 4 Physical Dimensions inches (millimeters) unless otherwise noted 20 Terminal Ceramic Leadless Chip Carrier (L) NS Package Number E20A 14 Lead Ceramic Dual-In-Line Package (D) NS Package Number J14A 5 www.national.com 54AC02 Quad 2-Input NOR Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14 Lead Ceramic Flatpak (F) NS Package Number W14B LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into sonably expected to cause the failure of the life support the body, or (b) support or sustain life, and whose faildevice or system, or to affect its safety or effectiveness. ure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com www.national.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Francais Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: sea.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.