Fea tures
•Interfaces with all logic circuits
•Two output options
•Optimized for fiber optic applications
using 50 to 200 micron fiber
•Data rate to 200kbps NRZ
•Available with multiple packaging
options
De scrip tion
The OPF500, OPF510 series receiver
contains a monolithic integrated circuit
which incorporates a photodiode, a linear
amplifier, a voltage regulator, and a
Schmitt trigger on a single silicon chip.
These receivers are designed for short
haul fiber optic systems using 850 nm
LED’s such as Optek’s OPF300 series.
These devices feature TTL\LSTTL
compatible logic level output. An internal
voltage regulator allows operation with
supply voltages ranging from 4.5V to
16V.
Ab so lute Maxi mum Rat ings (TA = 25o C un less oth er wise noted)
Sup ply Volt age ................................................... 18 V
Stor age Tem pera ture Range .............................. -65o C to +100o C
Op er at ing Tem pera ture Range ............................. -40o C to +85o C
Lead Sol der ing Tem pera ture [1/16 inch (1.6 mm) from case for 5 sec. with sol der ing
iron] .......................................................... 240o C
Power Dis si pa tion .............................................. 200 mW
Du ra tion of Out put Short to VCC ..................................... 1 sec.
Volt age at Out put.................................................. 30 V
Sink ing Cur rent.................................................. 16 mA
Sche mat ics
Prod uct Bul le tin OPF500
Feb ru ary 1996
200kbps Fi ber Op tic Re ceiver
Type OPF500, OPF510 Se ries
Op tek Tech nol ogy, Inc. 1215 W. Crosby Road Car roll ton, Texas 75006 (972) 323- 2200 Fax (972) 323- 2396
VCC
OUT
GND
VCC
OUT
GND
Buffer/10K PU
Inverter/10K PU
8-92