Semiconductor fuses
Semiconductor (AC) fuses
SCAC68
Protistor®Square-body Fuses
PSC aR sizes 3x - 450V to 700 VAC
Main characteristics
12/04
450 TO 700VAC / 63 TO 2800A
Exceptionally low I2T, Watt losses.
Non-magnetic construction,
Highly reliable low voltage
Trip-indicator system, conformity to UL,
IEC, DIN and VDE standards.
Increased technical performance
• Highter ratings
• Reduction in volume and weight
Recognized
This fuse preselection table indicates, for each size:
- rated current (or rating) In
- pre-arcing I2t (I2tp) at 1 ms
- total operating I2t (I2tt) at 660 V, f=50Hz cos ϕ=0.15, and for a total operating time from 8 to 10 ms
- dissipated power Pn at the rated current In, and at 0.8 In, in steady state
- breaking capacity at various voltages, checked by tests
made in accordance with IEC and American standards.
SCAC69
Semiconductor fuses
Semiconductor (AC) fuses
Protistor®Square-body Fuses
PSC aR sizes 3x - 450V to 700 VAC
Main characteristics
12/04
Total I2t @ Tested Breaking capacity
Nominal Voltage Pre-arcing 660V (kA)
Size (VAC) Ampere I2t @ 1ms (*) @ Un Power Pn (W)
IEC @ 690V USA @ 700V
Rating (A) (kA2s) (kA2s)
IEC USA End contact Blades (*) @ Un (*) @ Un
For others Ampere ratings consult us
50 0,116 0,62 9 9
63 0,2 1,1 14 14
80 0,33 1,8 19 19
100 0,47 2,5 26 26
125 0,85 4,5 30 30
160 1,6 8,5 37 37
200 3 15,5 42 43
30 690 700 250 5,8 30 48 50 200 200
315 12 62 53 55
350 15,5 80 57 60
400 23 120 60 65
450 26 150 80 88
500 41 240 80 88
550 52 300 80 90
600 650 630 84 450(*) 85 95 200(*) 200(*)
160 1,3 7 35 35
200 2,6 13,5 45 45
250 4,7 25 52 52
315 7,5 40 65 65
350 10,5 55 67 67
400 19 100 68 68
31 690 700 450 26,5 140 70 70 200 200
500 37 195 70 72
550 52 280 70 75
630 75 390 75 85
700 95 490 85 95
800 140 800 105 120
315 5,2 28,9 71 71
350 8,9 48,8 71 74
400 15 80 72 75
450 22 115 77 80
500 28 145 85 90
550 37 195 90 95
690 700 630 54 280 95 105 200 200
700 76 400 100 110
32 800 115 600 110 120
900 170 900 110 125
1000 240 1250 115 135
600 650 1100 270 1450(*) 140 165 160(*) 160(*)
550 600 1250 410 1950(*) 150 180 150(*) 150(*)
500 550 1400 555 2300(*) 160 200 130(*) 130(*)
1600 870 3600(*) 165 205
450 500 1800 1050 3700(*) 195 230 110(*) 110(*)
450 13,45 74,1 84 88
500 19 100 105 105
550 27 140 105 110
630 40 210 110 120
700 55 300 115 125
800 95 490 120 130
690 700 900 135 700 120 135 200 200
1000 170 900 135 155
33 1100 240 1260 135 160
1250 350 1850 150 180
1400 480 2500 160 200
1500 500 2500(*) 210 240 160(*) 160(*)
600 650 1600 555 2900(*) 210 240
1800 720 3870(*) 225 260
550 600 2000 950 4500(*) 250 290 150(*) 150(*)
500 550 2250 1250 5160(*) 280 320 130(*) 130(*)
450 500 2500 1870 6540(*) 280 330 110(*) 110(*)
800 60 320 144
1000 110 590 165
1250 220 1100 190
690 700 1400 300 1600 200 200 200
2X32 1600 450 2400 220
1800 700 3500 225
2000 950 5000 235
550 600 2200 1100 5250(*) 280 150(*) 150(*)
1000 76 395 220
1250 160 850 230
690 700 1400 225 1200 240 170 170
1600 375 1900 250
2x33 1800 530 2800 250
2000 700 3100(*) 280
600 650 2200 950 4400(*) 280 160(*) 160(*)
2500 1400 6600(*) 310
2800 1900 8800(*) 330
Estimated breaking capacity: 300kA
Semiconductor fuses
Semiconductor (AC) fuses
SCAC76
Protistor®Square-body Fuses
PSC aR sizes 3x - 450V to 700 VAC
IEC Terminals French - 30 - 33 End contacts
12/04
Size
30
31
32
33
Designation Catalog Number
Reference
Number
S300373
M300000
S300051
T300052
V300053
W300054
X300055
Y300056
Z300057
A300058
B300059
V300398
W300399
X300400
L301770
M300299
N300001
P300002
Q300003
M300046
R300004
S300005
T300006
V300007
W300008
X300009
Y300401
M302162
N302163
H300065
J300066
K300067
L300068
M300069
N300070
P300071
Q300072
S300074
M300759
P301060
Q301061
H300893
R301062
W302170
V300076
W300077
X300078
Y300079
Z300080
A300081
B300082
C300083
D300084
E300085
Y300585
Z300586
A300587
B300588
K300757
L300758
Weight (g)
245
370
510
600
790
910
3
3
3
3
3
3
PC30UD69V50TF
PC30UD69V63TF
PC30UD69V80TF
PC30UD69V100TF
PC30UD69V125TF
PC30UD69V160TF
PC30UD69V200TF
PC30UD69V250TF
PC30UD69V315TF
PC30UD69V350TF
PC30UD69V400TF
PC30UD69V450TF
PC30UD69V500TF
PC30UD69V550TF
PC30UD60V630TF
PC31UD69V160TF
PC31UD69V200TF
PC31UD69V250TF
PC31UD69V315TF
PC31UD69V350TF
PC31UD69V400TF
PC31UD69V450TF
PC31UD69V500TF
PC31UD69V550TF
PC31UD69V630TF
PC31UD69V700TF
PC31UD69V800TF
PC32UD69V315TF
PC32UD69V350TF
PC32UD69V400TF
PC32UD69V450TF
PC32UD69V500TF
PC32UD69V550TF
PC32UD69V630TF
PC32UD69V700TF
PC32UD69V800TF
PC32UD69V900TF
PC32UD69V1000TF
PC32UD60V1100TF
PC32UD55V1250TF
PC32UD50V1400TF
PC32UD50V1600TF
PC32UD45V1800TF
PC33UD69V450TF
PC33UD69V500TF
PC33UD69V550TF
PC33UD69V630TF
PC33UD
69V
700TF
PC33UD69V800TF
PC33UD69V900TF
PC33UD69V1000TF
PC33UD69V1100T
F
PC33UD69V1250TF
PC33UD69V1400TF
PC33UD
60V
1500TF
PC33UD60V1600TF
PC33UD60V1800T
F
PC33UD55V2000TF
PC33UD50V2250T
F
PC33UD45V2500TF
Packaging
6,9 URD 30 TTF 0050
6,9 URD 30 TTF 0063
6,9 URD 30 TTF 0080
6,9 URD 30 TTF 0100
6,9 URD 30 TTF 0125
6,9 URD 30 TTF 0160
6,9 URD 30 TTF 0200
6,9 URD 30 TTF 0250
6,9 URD 30 TTF 0315
6,9 URD 30 TTF 0350
6,9 URD 30 TTF 0400
6,9 URD 30 TTF 0450
6,9 URD 30 TTF 0500
6,9 URD 30 TTF 0550
6 URD 30 TTF 0630
6,9 URD 31 TTF 0160
6,9 URD 31 TTF 0200
6,9 URD 31 TTF 0250
6,9 URD 31 TTF 0315
6,9 URD 31 TTF 0350
6,9 URD 31 TTF 0400
6,9 URD 31 TTF 0450
6,9 URD 31 TTF 0500
6,9 URD 31 TTF 0550
6,9 URD 31 TTF 0630
6,9 URD 31 TTF 0700
6,9 URD 31 TTF 0800
6,9 URD 32 TTF 0315
6,9 URD 32 TTF 0350
6,9 URD 32 TTF 0400
6,9 URD 32 TTF 0450
6,9 URD 32 TTF 0500
6,9 URD 32 TTF 0550
6,9 URD 32 TTF 0630
6,9 URD 32 TTF 0700
6,9 URD 32 TTF 0800
6,9 URD 32 TTF 0900**
6,9 URD 32 TTF 1000**
6 URD 32 TTF 1100**
5,5 URD 32 TTF 1250**
5 URD 32 TTF 1400**
5 URD 32 TTF 1600**
4,5 URD 32 TTF 1800**
6,9 URD 33 TTF 0450
6,9 URD 33 TTF 0500
6,9 URD 33 TTF 0550
6,9 URD 33 TTF 0630
6,9 URD 33 TTF 0700
6,9 URD 33 TTF 0800
6,9 URD 33 TTF 0900
6,9 URD 33 TTF 1000
6,9 URD 33 TTF 1100
6,9 URD 33 TTF 1250**
6,9 URD 33 TTF 1400**
6 URD 33 TTF 1500**
6 URD 33 TTF 1600**
6 URD 33 TTF 1800**
5,5 URD 33 TTF 2000**
5 URD 33 TTF 2250**
4,5 URD 33 TTF 2500**
P
Threaded studs and microswitches
supplied separately
see microswitchesPSC 3x & 7x and
Metric studs sections
Size A B C D M±N±E±1 dG
±0.1 P
30 40 46,5 82 26 22 27 50,6 M8 9 6
1-9/16” 1-27/32” 3-7/32” 1-1/64” 2” 23/64” 15/64”
31 51 56,5 91 30 19 24 50,6 M8 9 9
2” 2-7/32” 3-37/64” 1-3/16” 2” 23/64” 23/64”
32 60 65,5 100 38 ; (42mm **) 19 39 50,6 M10 15 9
2-3/8” 2-37/64” 3-15/16” 1-1/2” ; (1-21/32” **) 2” 19/32” 23/64”
33 74,5 79,5 114 46 ; (52mm **) 24 39 50,6 M12 15 9
2-15/16” 3-1/8” 4-1/2” 1-13/16” ; (2-1/16” **) 2” 19/32” 23/64”
Note:
dimensions in mm
dimensions in inches
SCAC77
Semiconductor fuses
Semiconductor (AC) fuses
Protistor®Square-body Fuses
PSC aR sizes 3x - 450V to 700 VAC
IEC Terminals French - 30 - 33 End contacts
12/04
Size
2 x 32
2 x 33
Designation Catalog Number
Reference
Number
T300305
T300213
V300214
G300087
W300215
X300216
Y300217
D301993
B301186
D300268
E300269
F300270
B300427
R302235
Q302234
P302233
N302232
L301977
M301978
N301979
P301980
Q301981
R301982
Weight (g)
1240
3300
1900
2000
1
1
PC232UD69V8CTF
PC232UD69V10CTF
PC232UD69V13CTF
PC232UD69V14CTF
PC232UD69V16CTD
PC232UD69V18CTD
PC232UD69V20CTD
PC232UD55V22CTD
PC233UD69V10CTF
PC233UD69V13CTF
PC233UD69V14CTF
PC233UD69V16CTF
PC36UD69V18CP11
PC36UD60V20CP11
PC36UD60V22CP11
PC36UD60V25CP11
PC36UD60V28CP11
PC36UD55V30CP11
PC36UD55V32CP11
PC36UD50V36CP11
PC36UD50V40CP11
PC36UD40V45CP11
PC36UD40V50CP11
Packaging
6,9 URD 232 TTF 0800
6,9 URD 232 TTF 1000
6,9 URD 232 TTF 1250
6,9 URD 232 TTF 1400
6,9 URD 232 TDF 1600
6,9 URD 232 TDF 1800
6,9 URD 232 TDF 2000
5,5 URD 232 TDF 2200
6,9 URD 233 TTF 1000
6,9 URD 233 TTF 1250
6,9 URD 233 TTF 1400
6,9 URD 233 TTF 1600
6,9 URD 233 PLAF 1800
6 URD 233 PLAF 2000
6 URD 233 PLAF 2200
6 URD 233 PLAF 2500
6 URD 233 PLAF 2800
5,5 URD 233 PLAF 3000*
5,5 URD 233 PLAF 3200*
5 URD 233 PLAF 3600*
5 URD 233 PLAF 4000*
4 URD 233 PLAF 4500*
4 URD 233 PLAF 5000*
2x32 TT 60 138,5 172 11 67,6 66,5 100 35 61 40 M 10 4 107,5 48 72
2x33 TT 74,5 167 200 13 67,6 81 114 50 80 40 M 12 4 107,5 54 86
2x32 TD 65,5 147 182 - 91,5 - - 30 - 60 M 10 12 140 - -
2x33 PLAF 75 171,5 207 - 55,5 - 115 40 - 71 M 10 15 81 - -
Size A B C D E F G H J K d e L M N
*Consult us
TT TD PLAF
Semiconductor fuses
Semiconductor (AC) fuses
SCAC78
Protistor®Square-body Fuses
PSC aR sizes 3x - 450V to 700 VAC
IEC Terminals French - 30 - 33 End contacts
12/04
33 PPAF Standard Press-Pack
Size
33
2x33
Designation Catalog Number
Reference
Number
D301855
E301856
G301927
R300694
H302250
K302252
M302254
L302253
to be given - contact us
V301985
to be given - contact us
X301987
to be given - contact us
M301932
Weight (g)
910
2450
3
1
PC33UD69V13CPP
PC33UD69V14CPP
PC33UD60V16CPP
PC36UD69V18CP12
PC36UD60V20CP12
PC36UD60V22CP13
PC36UD60V25CP12
PC36UD60V28CP13
to be given - contact us
PC36UD55V32CP12
to be given - contact us
PC36UD50V40CP12
to be given - contact us
PC36UD40V50CP12
Packaging
6,9 URD 33 PPAF1250
6,9 URD 33 PPAF1400
6 URD 33 PPAF1600
6,9 URD 233 PPAF1800
6 URD 233 PPAF2000
6 URD 233 PPAF2200
6 URD 233 PPAF2500
6 URD 233 PPAF2800
5,5 URD 233 PPAF3000
5,5 URD 233 PPAF3200
5,5 URD 233 PPAF3600
5 URD 233 PPAF4000
4,5 URD 233 PPAF4500
4 URD 233 PPAF5000
Studs and microswitches supplied separately
Semiconductor fuses
Semiconductor (AC) fuses
SCAC84
Protistor®Square-body Fuses
PSC aR sizes 3x - 450V to 700 VAC
Curves set
12/04
I2t Multiplier coefficient
Mean curve indicating variation of total I2t (I2t t) and total
operating time Ttin accordance with working voltage U.
Example:
Fuse 350 A in size 30.
Ip= 10 000 A U = 500 V
At 660 V
I2t t= 80 000 A2s Tt= 6 ms
At 500 V
I2t t= 80 000 x 0.72 = 57 600 A2s
Tt= 6 x 0.72 = 4.3 ms
Dissipated power Arc voltage
Curve indicating peak arc voltage Um which
may appear across fuse terminals as
function of working voltage U at cos ϕ= 0.15
Curve enabling calculation of dissipated
power P by a fuse rated IN, as a function
of the RMS current I, in multiples of IN, in
a steady state.
Sizes 30 - 31 - 32 - 33
SCAC85
Semiconductor fuses
Semiconductor (AC) fuses
Protistor®Square-body Fuses
PSC aR sizes 3x - 450V to 700 VAC
Curves set
12/04
Maximum values of total
operating I2t and total operating
times
Left: Horizontal curves indicating the maximum
values of total operating I2t (I2tt) as function of the
prospective current Ipat 660 V, cos ϕ= 0.15.
The oblique lines indicate the corresponding total
operating time Tt, with pre-arcing time in brackets.
Time-current characteristics
Above, left: Curves indicating pre-arcing time for
each rated current as a function of RMS value of
pre-arcing current I.
- Tolerances on this current ± 8 %.
- Beyond 30 sec or 10 sec, small overloads must be
eliminated by another device.
- Curve CC’ represents the maximum times taken by
the associated device to clear small overloads; only
its horizontal line is represented. Its oblique line must
be plotted according to sketch, top right corner.
- The intersection of the fuse and CC’ curves indicates
the minimum breaking current Ipm of the fuse.
Cut-off characteristics
Below, right: Curves indicating for each rated-
current the peak value Icthat the current may
reach as a function of the prospective fault
current Ip.
Size
30
3,2 mm
Size 30
Semiconductor fuses
Semiconductor (AC) fuses
SCAC86
Protistor®Square-body Fuses
PSC aR sizes 3x - 450V to 700 VAC
Curves set
12/04
Maximum values of total
operating I2t and total operating
times
Left: Horizontal curves indicating the maximum
values of total operating I2t (I2tt) as function of the
prospective current Ipat 660 V, cos ϕ = 0.15.
The oblique lines indicate the corresponding total
operating time Tt, with pre-arcing time in brackets.
Time-current characteristics
Above, left: Curves indicating pre-arcing time for
each rated current as a function of RMS value of pre-
arcing current I.
- Tolerances on this current ± 8 %.
- Beyond 30 sec or 10 sec, small overloads must be
eliminated by another device.
- Curve CC’ represents the maximum times taken by
the associated device to clear small overloads; only its
horizontal line is represented. Its oblique line must be
plotted according to sketch, top right corner.
- The intersection of the fuse and CC’ curves
indicates the minimum breaking current Ipm of the
fuse.
Cut-off characteristics
Below, right: Curves indicating for each rated
current the peak value Icthat the current may
reach as a function of the prospective fault
current Ip.
Size
31
Size 31
SCAC87
Semiconductor fuses
Semiconductor (AC) fuses
Protistor®Square-body Fuses
PSC aR sizes 3x - 450V to 700 VAC
Curves set
12/04
Maximum values of total
operating I2t and total operating
times
Left: Horizontal curves indicating the maximum
values of total operating I2t (I2tt) as function of the
prospective current Ipat 660 V, cos ϕ= 0.15.
The oblique lines indicate the corresponding total
operating time Tt, with pre-arcing time in brackets.
Time-current characteristics
Above, left: Curves indicating pre-arcing time for
each rated current as a function of RMS value of
pre-arcing current I.
- Tolerances on this current ± 8 %.
- Beyond 30 sec or 10 sec, small overloads must be
eliminated by another device.
- Curve CC’ represents the maximum times taken by
the associated device to clear small overloads; only
its horizontal line is represented. Its oblique line must
be plotted according to sketch, top right corner.
- The intersection of the fuse and CC’ curves indicates
the minimum breaking current Ipm of the fuse.
Cut-off characteristics
Below, right: Curves indicating for each rated-
current the peak value Icthat the current may
reach as a function of the prospective fault
current Ip.
Size
32
Size 32
Semiconductor fuses
Semiconductor (AC) fuses
SCAC88
Protistor®Square-body Fuses
PSC aR sizes 3x - 450V to 700 VAC
Curves set
12/04
Maximum values of total
operating I2t and total operating
times
Left: Horizontal curves indicating the maximum
values of total operating I2t (I2tt) as function of the
prospective current Ipat 660 V, cos ϕ = 0.15.
The oblique lines indicate the corresponding total
operating time Tt, with pre-arcing time in brackets.
Time-current characteristics
Above, left: Curves indicating pre-arcing time for
each rated current as a function of RMS value of pre-
arcing current I.
- Tolerances on this current ± 8 %.
- Beyond 30 sec or 10 sec, small overloads must be
eliminated by another device.
- Curve CC’ represents the maximum times taken by
the associated device to clear small overloads; only its
horizontal line is represented. Its oblique line must be
plotted according to sketch, top right corner.
- The intersection of the fuse and CC’ curves
indicates the minimum breaking current Ipm of the
fuse.
Cut-off characteristics
Below, right: Curves indicating for each rated
current the peak value Icthat the current may
reach as a function of the prospective fault
current Ip.
Size
33
Size 33
Maximum values of total
operating I2t and total operating
times
Left: Horizontal curves indicating the maximum
values of total operating I2t (I2tt) as function of the
prospective current Ipat 660 V, cos ϕ= 0.15.
The oblique lines indicate the corresponding total
operating time Tt, with pre-arcing time in brackets.
Semiconductor fuses
Semiconductor (AC) fuses
Protistor®Square-body Fuses
PSC aR sizes 3x - 450V to 700 VAC
Curves set
12/04
Time-current characteristics
Above, left: Curves indicating pre-arcing time for
each rated current as a function of RMS value of
pre-arcing current I.
- Tolerances on this current ± 8 %.
- Beyond 30 sec or 10 sec, small overloads must be
eliminated by another device.
- Curve CC’ represents the maximum times taken by
the associated device to clear small overloads; only
its horizontal line is represented. Its oblique line must
be plotted according to sketch, top right corner.
- The intersection of the fuse and CC’ curves indicates
the minimum breaking current Ipm of the fuse.
Cut-off characteristics
Below, right: Curves indicating for each rated-
current the peak value Icthat the current may
reach as a function of the prospective fault
current Ip.
Size
2 x 32
Sizes 2x32
SCAC89
Semiconductor fuses
Semiconductor (AC) fuses
SCAC90
Protistor®Square-body Fuses
PSC aR sizes 3x - 450V to 700 VAC
Curves set
12/04
Maximum values of total
operating I2t and total operating
times
Left: Horizontal curves indicating the maximum
values of total operating I2t (I2tt) as function of
the prospective current Ipat 660 V, cos ϕ = 0.15.
The oblique lines indicate the corresponding total
operating time Tt, with pre-arcing time in brackets.
Time-current characteristics
Above, left: Curves indicating pre-arcing time for
each rated current as a function of RMS value of
pre-arcing current I.
- Tolerances on this current ± 8 %.
- Beyond 30 sec or 10 sec, small overloads must be
eliminated by another device.
- Curve CC’ represents the maximum times taken by
the associated device to clear small overloads; only
its horizontal line is represented. Its oblique line
must be plotted according to sketch, top right
corner.
- The intersection of the fuse and CC’ curves
indicates the minimum breaking current Ipm of the
fuse.
Cut-off characteristics
Below, right: Curves indicating for each rated
current the peak value Icthat the current may
reach as a function of the prospective fault
current Ip.
Size
2 x 33
Size 2x33
SCAC91
Semiconductor fuses
Semiconductor (AC) fuses
Protistor®Square-body Fuses
PSC aR sizes 3x - 450V to 700 VAC
Curves set
12/04
63 a 230
80 a 300
100 a 360
125 a 460
160 a 650
200 a 880 a 850
250 a 1300 a 1150
315 a 1700 a 1450
350 a 1900 a 1600
400 a 2300 a 2200 a 2000
450 a 2500 a 2300
500 a 3000 a 2600 a 2300
550 a 3400 a 3150 a 2500
630 a 5000 a 3700 a 3250
700 a 5600 a 4300 a 3900
800 a 5300 a 4800
900 a 7800 a 5600
1000 b 9000 a 6600 a 5200
1100 a 7700
1250 b 11000 a 7400 a 6500
1400 b 12500 a 8600 a 7800
1600 a 10600 a 9600
1800 a 15600 a 11200
2000 b 18000 a 13200
2200 a 15400
2500 b 22000
2800 b 25000
DC working voltage possibilities
Rated
current
In (A)
Curves (*) and lpm (1) corresponding to the rating
30 31 32 33 2 x 32 2 x33
* Ipm * Ipm * Ipm * Ipm * Ipm * Ipm
(A) (A) (A) (A) (A) (A)
Top: Curves indicating the maximum time constant L/R of the fault path as a function of the DC
voltage U for the rated currents in the sizes indicated in the table.
Ipm (1) values indicate the minimum breaking current in Amperes (A).
Remark:
When the fault current di/dt is very large, this condition can be exceeded. This is the case for faults
occurring in voltage commutated inverters.
Below: Curves indicating peak arc voltage Um which may appear across fuse terminals as a function
of the DC working voltage U, for various time constant L/R of fault path.
Sizes 30 - 31 - 32 - 33
Semiconductor fuses
Semiconductor (AC) fuses
SCAC92
Protistor®Square-body Fuses
PSC aR sizes 3x - 450V to 700 VAC
Microswitches PSC 3x &7x
12/04
Main Characteristics
MS 7V 1-5
- MICROSWITCH SYSTEMS ADAPTED
TO THE FOLLOWING FERRAZ SHAWMUT FUSES ONLY:
- PSC sizes 30, 31, 32, 33, 2x32, 2x33 / 70, 71, 72, 73, 272, 273
except plain blades
- PSC LR sizes 33, 233, 73, 273
- PERMANENT INDICATION OF FUSE STATE: CONDUCTIVE
BLOWN
- MANUAL RESETTING
- STANDARD AND LOW ELECTRICAL LEVEL WITH DIFFERENT INSULATION LEVELS
- BS TYPE FOR USE IN CORROSIVE ATMOSPHERE
- MS 3V 1-5 UR AND MS 7V 1-5 UR TYPE UL ARE RECOGNIZED
Code
AC
Insulation
voltage
rating
(***)
Breaking Capacity AC voltage
withstand
test
(*)
Current
rating
Positive
operating
voltage/current
Fire class
according
to UL 94
Impulse
voltage test
Uimp1.2/50
µs
(**)
Non inductive circuit
Inductive circuit : L/R = 25ms
Current 30V 110V 250V 30V 110V 250V
* Between power circuit and microswitch terminals as per IEC 60 and 694 and NFC 64010 (50/60 Hz 1 min duration in dry air)
** Between power circuit and microswitch terminals Uimp: impulse voltage as per IEC 60947-1
*** Between power circuit and microswitch terminals
Warning: microswitch systems exclusively designed for FERRAZ SHAWMUT.
PSC Fuses fitted a petented trip-indicator, saving use of EDV
MS 3V 1-5
MS 3V 1-5 UR
MS 7V 1-5
MS 7V 1-5 UR
MS 3V 1-5 BS
MS 3V 1-9 BS
MS 7V 1-5 BS
MS 7V 1-9 BS
MS 3V 1-5 ET
MS 7V 1-5 ET
1000 V
1500V
1000 V
1500V
1000V
1500V
20 V
50 mA
10 V
10 mA
10 V
10 mA
10 A
3 A
3 A
50/60 Hz
DC
50/60 Hz
DC
50/60 Hz
DC
10 A
0,4 A
3 A
0,5 A
3 A
0,5 A
10 A
0,2 A
3 A
0,25 A
3 A
-
10 A
4 A
2 A
3 A
2 A
2 A
10 A
0,2 A
1 A
0,2 A
1 A
0,2 A
10 A
0,1 A
1 A
0,1 A
1 A
-
8,5 kV
12 kV
8,5 kV
12 kV
8,5 kV
12 kV
14 kV
20 kV
14 kV
20 kV
14 kV
20 kV
H.B
10 A
8 A
3 A
3 A
3 A
3 A
SCAC93
Semiconductor fuses
Semiconductor (AC) fuses
Protistor®Square-body Fuses
PSC aR sizes 3x - 450V to 700 VAC
Microswitches for PSC 3x &7x
12/04
MS 3V…
MS 7V...
Indication systems for PSC Fuse sizes 30 to 73
Ref.
Number
Designation
Fuse
size Pack.
Weight
(g)
Indication
style
39
42
X310014
MS3V1-5
4
2
1
34.6 32.7
6.35 x 0.8
1
4
2
10
X310014
MS3V1-5
position déclenchée
switched position
34.5 32.7
6.35 x 0.8
1
4
2
10
K310003
MS7V1-5BS
position déclenchée
switched position
32.7
10
S310010
MS7V1-5 ET
4.75 x 0.5
1
4
2
32.7
4.75 x 0.5
1
4
2
10
R310009
MS3V1-5 ET
62,5
42
K310003
MS7V1-5BS
4
2
1
30, 31
32, 33
MS 3V 1-5
(fig.1)
MS 3V 1-5 UR
MS 3V 1-5 BS
(3)
MS 3V 1-9 BS
(4)
MS 3V 1-5 ET
(fig.2)
34
34
44
34
3 pieces
3 pieces
3 pieces
3 pieces
Catalog Number
MS3 V1-5
MS3 V1-5UR
MS3-V1-5BS
MS3V1-9BS
MS3V1-5 ETANCHE
Standard NO-NC
Low level NO-NC
Double pole
Low level
Low level NO-NC
X310014
Y310038
K310013
P310011
S310009
These patented indication systems are exclusively hand resettable.
(7) Same as fig. 5
(8) Same dimensions as figure 5 but with 2 microswitches side by side
(9) Watertightness class
Warning: Microswitch systems exclusively designed for FERRAZ SHAWMUT PSC fuses fitted with a
patented trip-indicator, saving use of EDV.
IP 50 (9)
(3) Same as fig.1
(4) Same dimensions as figure 1
but with 2 microswitches side by side
(9) Watertightness class
(fig. 1)
(fig. 2)
(fig. 5)
(fig. 6)
Ref.
Number
Designation
Fuse
size Pack.
Weight
(g)
Indication
style
70, 71
72, 73
MS 7V 1-5
(fig.5)
MS 7V 1-5 UR
MS 7V 1-5 BS
(3)
MS 7V 1-9 BS
(4)
MS 7V 1-5 ET
(fig.6)
45
45
55
55
3 pieces
3 pieces
3 pieces
3 pieces
Catalog Number
MS7 V1-5
MS7 V1-5UR
MS7-V1-5BS
MS7V1-9BS
MS7V1-5 ETANCHE
Standard NO-NC
Low level NO-NC
Double pole
Low level
Low level NO-NC
J310002
Z310039
K310003
P310007
S310010 IP 50 (9)
Semiconductor fuses
Semiconductor (AC) fuses
SCAC94
Protistor®Square-body Fuses
PSC aR sizes 3x - 450V to 700 VAC
Metric-studs
12/04
Ref. Number
S098801
T098802
V098803
W098804
X098805
Designation Catalog Number
HC stud pair
M8x30 & M8x35
HC stud pair
M10x30 & M10x50
HC stud pair
M12x35 & M12x50
HC stud pair
M10x50
HC stud pair M12x50
Pack.
6 pairs
6 pairs
6 pairs
6 pairs
6 pairs
STUM8x30M8x35
STUM10x30M10x50
STUM12x35M12x50
STUM10x50
STUM12x50
Unit weight
(g)
23
40
60
45
45
Maximum stud tightning
torque (Nm) (1)
10
15
15
10
15
15
10
15
15
Stud type
M8x30 & M8x35
M10x30 & M10x50
M12x35 & M12x50
M8x30 & M8x35
M10x30 & M10x50
M12x35 & M12x50
M8x30 & M8x35
M10x30 & M10x50
M12x35 & M12x50
Maximum nut tightning
torque (Nm) (1)
13.5
26
46
13.5
26
46
13.5
26
46
Stud mounting
Sizes 0 and 1
Size 2
Size 3
Size 2
Size 3
Type and fuse size
Torque type
We recommend the use of studs, whose quality is suited to all FERRAZ SHAWMUT square-body fuses with terminals
Balanced torque
Balanced torque
Unbalanced torque
Metric studs for threaded terminal fuses