DIODE MODULE DD(KD)100HB120/160 UL;E76102 M Power Diode Module DD100HB series are designed for various rectifier circuits. DD100HB has two diode chips connected in series and the mounting base is elctrically isolated from elements for simple heatsink construction. Wide voltage rating up to, 1,600V is avaiable for various input voltage. Applications Various rectifiers, Battery chargers, DC motor drives DD 2- 6.5 2 1 13 26MAX 3 ~ + 16.5 - 23 23 3M5 21 mounting base elements in a package for simple (single and three phase) bridge connections Highly reliable glass passivated chips High surge current capability Two 30MAX Isolated 93.5MAX 80 KD Unita Maximum Ratings Symbol Tj25 unless otherwise specified Ratings Item DF100HB120 DD100HB160 Unit VRRM Repetitive Peak Reverse Voltage 1200 1600 V VRSM Non-Repetitive Peak Reverse Voltage 1350 1700 V Symbol Item Conditions Ratings Unit IFAV Average Forward Current Single phase, half wave, 180conduction, Tc111 100 A IF (RMS) R.M.S. Forward Current Single phase, half wave, 180conduction, Tc111 155 A Surge Forward Current 1 2 cycle, I2t I2t Value for one cycle of surge current IFSM 50/60HZ, peak value, non-repetitive A 1800/2000 16500 A2S Tj Junction Temperature -40 to 150 Tstg Storage Temperature -40 to 125 VISO Isolation Voltage Mounting Torque 2500 V MountingM6 A.C.1minute Recommended Value 2.5-3.925-40 4.748) TerminalM5 Recommended Value 1.5-2.515-25 2.728) Nm fB Mass 170 g Electrical Characteristics Symbol Item IRRM Repetitive Peak Reverse Current, max. at VDRM, single phase, half wave. Tj150 VFM Forward Voltage Drop, max. Foward current 320ATj25Inst. measurement 1.35 V Junction to case 0.30 /W Rthj-c Thermal Impedance, max. SanRex Conditions Ratings Unit 30 mA (R) 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: semi@sanrex.com http://store.iiic.cc/ DD(KD)100HB120/160 Power Dissipation PavW Average Forward Current vs. Power Dissipation Per one element D.C. 2 Single Phase Three Phase 1 Max. Average Forward Current vs. Allowable Case Temperature Per one element D.C. Three Phase Single Phase Per one element = start 60Hz 50Hz TimeCycles Transient Thermal Impedance Per one element uncti ctio on tto o Case se JJu Maximum - - - Time tsec Output Current BTwo Pluse Bridge connection IdAav. B2 Rth:0.8C/W Rth:0.4C/W Rth:0.3C/W Rth:0.2C/W Rth:0.1C/W 1 3 4 Output CurrentA 5 Total Power DissipationW Allowable Case Temperature Transient Thermal Impedance j-c/W Cycle Surge Forward Current Rating Non-Repetitive Average Forward CurrentA Total Power DissipationW Average Forward CurrentA Surge Forward CurrentA Allowable Case Temperature Tc Forward Voltage DropV BSix pulse Bridge connection Output Current B6 B6 IdAav. Rth:0.8C/W Rth:0.4C/W Rth:0.3C/W Rth:0.2C/W Rth:0.1C/W Ambient Temperature Output CurrentA Allowable Case Temperature Forward Current IA F 3 Maximum Forward Characteristics Ambient Temperature SanRex 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: semi@sanrex.com http://store.iiic.cc/