Temperature Sensor E52 CSM_E52_DS_E_16_1 A Wide Variety of High-precision Temperature Sensors * New and improved E52 temperature sensor series. Wide selection of sensors compatible with M3 screws * Ideal for the thermal input devices of Temperature Controllers. * Select from a wide variety of Temperature Sensors according to the temperature to be measured, location, and environment, and also according to the type and shape of the terminal. Refer to Safety Precautions for All Temperature Controllers. Ordering Information List of Models Classification Generalpurpose Models Description Model and appearance Sheathed E52-P@AY platinum resistance E52-P@C-N thermometer E52-P@B-N -196C to 450C Pt100 Sheathed thermocouple 0C to 900C K (CA) J (IC) 3-conduc- B tor system Protective tubing material Terminal type Exposed 5 lead wires ASTM316L Enclosed terminals Nongrounded type 2 (0.75) Enclosed terminals ASTM316L Exposed 9 to lead wires 12 E52-CA@C-N E52-IC@C-N Enclosed terminals E52-CA@B-N E52-IC@B-N SUS316 E52-CA1DY E52-IC1DY 0C to 1,400C R (PR) 0C to 250C Pt100 -50C to 250C 0C to 400C K (CA) J (IC) 2 (0.25) 3-conduc- B tor system 13 14 Enclosed terminals 15 JIS ceramic Enclosed JIS special terminals ceramic 16 SUS316 Exposed 17 lead wires SUS304 Nongrounded type 2 (0.75) Grounded type E52-CA6F-N E52-IC6F-N E52-CA6D-N E52-IC6D-N E52-CA10AE-N E52-IC10AE-N 7 Exposed terminals E52-CA@C-N E52-IC@C-N E52-CA@ASY E52-IC@ASY 6 SUS316 Exposed terminals Low-cost E52-P10AEY platinum resistance E52-P6DY thermomE52-P6FY eter Page SUS316 E52-CA@B-N E52-IC@B-N E52-PR@C-N Low-cost thermocouple Class Exposed terminals 0C to 450C E52-CA@AY E52-IC@AY Conductor type -200C to 450C Standard E52-P@C-N platinum resistance thermometer Standard thermocouple Low-cost Models TemperaElement ture range type (See note 3.) 18 19 20 Nongrounded type Note: 1. Exclusive models are provided on the following page. 2. These tables provide general specifications only. Be sure to read the detailed specifications and precautions before use. 3. The temperature range varies with the material, thickness, construction, and element type of the protective tubing. 1 E52 Classification Description Model and appearance Exclusive Models Bayonet spring for molding machines E52-CA2GVY E52-IC2GVY 0C to 350C K (CA) J (IC) Crimping terminals E52-CA1GTY E52-IC1GTY 0C to 300C Conductor type Class Grounded 2 (0.75) type -50C to 250C Used for E52-P10GRY room temperature measurement -50C to 60C Double-el- E52-CA20AY-7 ement model 0C to 900C K (CA) Two nongrounded types E52-P20AY-7 -196C to 250C Two 3-con- B ductor systems E52-P20C-N-7 -200C to 450C E52-P5AY-40 Corrosion- E52-P20AY-1 resistant model E52-CA20AY-1 Protective tubing material SUS304 Terminal type Page Exposed 21 lead wires --- Used for E52-P2GSY measuring surface temperatures WaterE52-P10GPY proof model Thermistors TemperaElement ture range type (See note 3.) Pt100 3-conduc- B tor system SUS304 22 Pt100 2 (0.75) ASTM316L 25 Enclosed terminals 0C to 70C 3-conductor system SUS304 -50C to 180C 26 Exposed 22 lead wires Fluororesin tubing 23 SUS304 26 -80C to 180C 0C to 180C K (CA) Nongrounded type Silicone- E52-CA1DY-40 covered lead wires 0C to 300C Grounded type E52-CA1GTY-14 0C to 200C 2 (0.75) --- Explosion- E52-P@@C-N-6 proof model --- Pt100 3-conduc- B tor system E52-CA@@C-N-6 --- K (CA) Nongrounded type E52-THE5A E52-THE6F E52-THE6D -50C to 300C Thermistor Element- 1 interchangeable thermistor ASTM316L Enclosed terminals 24 SUS304 Exposed 28 lead wires 2 (0.75) Note: 1. General-purpose models and low-cost models are provided on the previous page. 2. These tables provide general specifications only. Be sure to read the detailed specifications and precautions before use. 3. The temperature range varies with the material, thickness, construction, and element type of the protective tubing. 2 E52 Accessories It is recommended that the following accessories be used for mounting Temperature Sensors. Accessory Compression Fitting Temperature range 600C max. Mounting example Mounting with Compression Fitting Page 29 Terminal box Compression Fitting PT screw Welding Loose Flange 400C max. Protective tubing Mounting with Loose Flange Loose Flange Mounting screw Terminal box Protective tubing Note: The Compression Fitting is not of airtight construction. Do not use the Compression Fitting for applications in which the exposure of the sensing object will cause problems. Note: 1. Use the Loose Flange in normal atmospheric pressure. The Loose Flange is not of airtight construction. 2. Use the Loose Flange at 400C max. 3. Do not apply the Loose Flange to protective tubing diameters other than the applicable ones. 3 E52 General-purpose Models Model Number Legend The type of resistance thermometer, protective tubing length, and lead length can be specified as shown below. Platinum Resistance Thermometers E52-@@@ D=@@@M 1 2 3 4 5 6 1. Element type P: Pt100 2. Protective tubing length (L) Specify the length in centimeters within the following range: Unit (cm) E52-@@AY Diameter (D) Length (L) 3.2 7 to 100 4.8 10 to 600 6.4 13 to 1,300 4. Diameter 3.2: 3.2-mm dia. (Protective tubing construction: Sheathed) E52-@@AY and E52-@@C-N only 4.8: 4.8-mm dia. (Protective tubing construction: Sheathed) E52-@@AY and E52-@@C-N only 6.4: 6.4-mm dia. (Protective tubing construction: Sheathed) E52-@@AY and E52-@@C-N only 8: 8-mm dia. (Protective tubing construction: Sheathed) E52-@@B-N and E52-@@C-N only 10: 10-mm dia. (Protective tubing construction: Standard) E52-@@C-N only 5. Heat resistance E52-@@B-N Code Diameter (D) 8 Length (L) Diameter (D) Vinyl-covered NETU 0C to 180C Sleeve: 0C to 100C Glass-wool-covered, externally shielded with stainless Length (L) 3.2 12 to 100 4.8 15 to 600 6.4 18 to 1,300 8 21 to 100 10 26 to 100 Lead type -20C to 70C Sleeve: 0C to 70C 20 to 100 E52-@@C-N Temperature range --- Specify for E52-@@AY model only. 6. Lead length (M) Specify the length in meters within the following range for the E52@@AY only: Range: 0.5, 1 to 100 m 3. Terminal AY: Exposed lead wires (Y-type crimp terminal for M3.5) B-N: Exposed terminals C-N: Enclosed terminals Examples Element: Pt100, protective tubing length: 420 mm, exposed leads, protective tubing dia.: 4.8 mm, heat resistive, lead length: 10 m E52-P42AY D=4.8 NETU 10M Sheathed Platinum Resistance Thermometers Refer to Model Number Legend above for the Pt100. Specifications Element type Pt100 Class JIS class B Sheath material SUS316 (E52-P@AY) ASTM316L (E52-P@B-N, E52-P@C-N) Sheath outer diameter 3.2 dia., 4.8 dia., 6.4 dia., 8 dia Conductor type 3-conductor system Temperature range -200C to 450C (in dry air) 4 E52 Exposed-lead Models E52-P@AY Dimensions Red (A) Unit (mm) Y-type crimp terminal for M3.5 Maker tube Lead wire SUS304 sleeve d White (B) M Black (B) d l 3.2 dia. 8 40 4.8 dia. 8 40 6.4 dia. 8 40 D Sheath (SUS316) D L Lead Wire * Standard (-20C to 70C): Fully vinyl-covered with twelve 0.18-dia conductors (0.3 mm thick) and 4.8 mm in outer dia. The sleeve resists a temperature range between 0C and 70C. * Heat Resistive (0C to 180C): Fully glass-wool-covered with thirty 0.12-dia. conductors (0.3 mm thick) externally shielded with stainless steel, 4 mm in outer dia. The sleeve resists a temperature range between 0C and 100C. * Lead Wire Length (M): 1, 2, 4, or 8 m Model Information Custom-made models are available on request. Refer to page 4 for details. Terminal type Protective tubing diameter D (mm) Exposed-lead 3.2 dia. Models Protective tubing length L (cm) 15 35 20 35 50 2 4 8 Standard E52-P15AY D=3.2 E52-P15AY D=3.2 E52-P15AY D=3.2 E52-P15AY D=3.2 1M 2M 4M 8M Heat resistive E52-P15AY D=3.2 E52-P15AY D=3.2 E52-P15AY D=3.2 E52-P15AY D=3.2 NETU 1M NETU 2M NETU 4M NETU 8M Standard E52-P20AY D=3.2 E52-P20AY D=3.2 E52-P20AY D=3.2 E52-P20AY D=3.2 1M 2M 4M 8M Heat resistive E52-P20AY D=3.2 E52-P20AY D=3.2 E52-P20AY D=3.2 E52-P20AY D=3.2 NETU 1M NETU 2M NETU 4M NETU 8M Standard E52-P35AY D=3.2 E52-P35AY D=3.2 E52-P35AY D=3.2 E52-P35AY D=3.2 1M 2M 4M 8M Heat resistive E52-P35AY D=3.2 E52-P35AY D=3.2 E52-P35AY D=3.2 E52-P35AY D=3.2 NETU 1M NETU 2M NETU 4M NETU 8M Standard E52-P20AY D=4.8 E52-P20AY D=4.8 E52-P20AY D=4.8 E52-P20AY D=4.8 1M 2M 4M 8M Heat resistive E52-P20AY D=4.8 E52-P20AY D=4.8 E52-P20AY D=4.8 E52-P20AY D=4.8 NETU 1M NETU 2M NETU 4M NETU 8M Standard E52-P35AY D=4.8 E52-P35AY D=4.8 E52-P35AY D=4.8 E52-P35AY D=4.8 1M 2M 4M 8M Heat resistive E52-P35AY D=4.8 E52-P35AY D=4.8 E52-P35AY D=4.8 E52-P35AY D=4.8 NETU 1M NETU 2M NETU 4M NETU 8M Standard E52-P50AY D=4.8 1M E52-P50AY D=4.8 NETU 1M Heat resistive 6.4 dia. Lead wire length M (m) 1 Model 20 4.8 dia. Lead wire type 20 35 50 E52-P50AY D=4.8 2M E52-P50AY D=4.8 NETU 2M E52-P50AY D=4.8 4M E52-P50AY D=4.8 NETU 4M E52-P50AY D=4.8 8M E52-P50AY D=4.8 NETU 8M Standard E52-P20AY D=6.4 E52-P20AY D=6.4 E52-P20AY D=6.4 E52-P20AY D=6.4 1M 2M 4M 8M Heat resistive E52-P20AY D=6.4 E52-P20AY D=6.4 E52-P20AY D=6.4 E52-P20AY D=6.4 NETU 1M NETU 2M NETU 4M NETU 8M Standard E52-P35AY D=6.4 E52-P35AY D=6.4 E52-P35AY D=6.4 E52-P35AY D=6.4 1M 2M 4M 8M Heat resistive E52-P35AY D=6.4 E52-P35AY D=6.4 E52-P35AY D=6.4 E52-P35AY D=6.4 NETU 1M NETU 2M NETU 4M NETU 8M Standard E52-P50AY D=6.4 E52-P50AY D=6.4 E52-P50AY D=6.4 E52-P50AY D=6.4 1M 2M 4M 8M Heat resistive E52-P50AY D=6.4 E52-P50AY D=6.4 E52-P50AY D=6.4 E52-P50AY D=6.4 NETU 1M NETU 2M NETU 4M NETU 8M 5 E52 Enclosed-terminal Models E52-P@C-N Dimensions Dimensions are given in millimeters, except for the length (L), which is provided in centimeters. 67 15 Socket (SUS304) Chain Sheath (ASTM316L) D 66 Caulking Terminal box Cap G3/8, Packing internal diameter 6.5 dia. (See note 2.) L-35 40 Use wiring terminals that fit M3 screws. Terminal box: The permissible temperature is 0C to 90C. Note: 1. The terminals in the cap indicate polarity (A, B, b). 2. The length L is in centimeters, but "35" is 35 millimeters. Therefore, for the E52-P35C-N: L = 35 (cm), the sheath length L - 35 = 350 - 35 = 315 mm. Model Information Custom-made models are available on request. Refer to page 4 for details. Terminal type Protective tubing length L (cm) Protective tubing diameter D (mm) 3.2 dia. 4.8 dia. 6.4 dia. 8 dia. Model Enclosed-terminal Models 20 E52-P20C-N D=3.2 E52-P20C-N D=4.8 E52-P20C-N D=6.4 E52-P20C-N D=8 35 E52-P35C-N D=3.2 E52-P35C-N D=4.8 E52-P35C-N D=6.4 E52-P35C-N D=8 50 E52-P50C-N D=3.2 E52-P50C-N D=4.8 E52-P50C-N D=6.4 E52-P50C-N D=8 75 --- E52-P75C-N D=4.8 E52-P75C-N D=6.4 --- Exposed-terminal Models E52-P@B-N Dimensions Dimensions are given in millimeters, except for the length (L), which is provided in centimeters. Model Information Sheath (ASTM316L) 42.5 15 Custom-made models are available on request. Refer to page 4 for details Terminal box Socket (SUS304) A B b 45 D Caulking 17.6 3-M3 Terminal type (See note.) L-40 Product label Terminal box: The permissible temperature is 0C to 100C. Exposedterminal Models Protective Protective tubing diameter D (mm) tubing length 8 dia. L (cm) Model 20 E52-P20B-N D=8 35 E52-P35B-N D=8 50 E52-P50B-N D=8 Note: The length L is in centimeters, but "40" is 40 millimeters. Therefore, for the E52-P35B-N: L = 35 (cm), the sheath length L - 40 = 350 - 40 = 310 mm. 6 E52 Standard Platinum Resistance Thermometers Refer to Model Number Legend on page 4 for the Pt100. Specifications Element type Pt100 Class JIS class B (See note 2.) Protective tubing material SUS316 Conductor type 3-conductor system Temperature range 0C to 450C (in dry air) Note: 1. Use the sheathed platinum resistance thermometer if condensation is likely to result. 2. Be sure that the thermometer is free of vibration or shock if high temperatures are measured. Enclosed-terminal Models E52-P@C-N Dimensions Dimensions are given in millimeters, except for the length (L), which is provided in centimeters. 96 Terminal box SUS316 protective tubing Chain D 86 Socket (SUS304) 5 Cap (See note 1.) G1/2, Packing internal diameter 9 dia. L-50 53 Note: 1. The length L is in centimeters, but "50" is 50 millimeters. Therefore, for the E52-P75C-N: L = 75 (cm), the protective tubing length L - 50 = 750 - 50 = 700 mm. Terminal box: The permissible temperature is 0C to 90C. Note: The terminals in the cap indicate polarity (A, B, B). Model Information Custom-made models are available on request. Refer to page 4 for details. Terminal type Protective tubing length L (cm) Protective tubing diameter D (mm) 10 dia. Model Enclosed-terminal Models 35 E52-P35C-N D=10 50 E52-P50C-N D=10 75 E52-P75C-N D=10 100 E52-P100C-N D=10 7 E52 Model Number Legend The type of resistance thermometer, protective tubing length, and lead length can be specified as shown below. Thermocouples E52-@@@ D=@@@M@ 1 2 3 4 5 6 7 1. Element type CA:K IC: J PR:R 2. Protective tubing length (L) Specify the length in centimeters in the following range: Unit (cm) 4. Diameter Specify the protective tubing material according to the table. Code Diameter Protective tubing (D) construction Protective tubing material 1 1 mm Sheathed ASTM316L 1.6 1.6 mm Sheathed ASTM316L E52-@@AY (Exposed-lead Model) 3.2 3.2 mm Sheathed ASTM316L Diameter (D) 4.8 4.8 mm Sheathed ASTM316L 2 to 200 6.4 6.4 mm Sheathed ASTM316L 3 to 500 8 8 mm Sheathed ASTM316L 3.2 5 to 2,000 10 10 mm Standard SUS316, SUS310S 4.8 8 to 2,300 12 12 mm Standard SUS316, SUS310S 10 to 1,200 15 15 mm Standard SUS316, SUS310S 12 to 1,000 22 22 mm Standard SUS316, SUS310S 17 17 mm Standard PT1, PT0 1 1.6 6.4 8 Length (L) E52-@@B-N and E52-@@C-N (except E52-PR@C-N) Diameter (D) Length (L) 3.2 11 to 2,000 4.8 14 to 2,300 6.4 16 to 1,200 8.0 18 to 1,000 10 21 to 126 12 24 to 126 15 29 to 156 22 39 to 206 E52-PR@C-N Diameter (D) 15 5. Heat resistance Specify this item for the exposed-lead models only. Code Temperature range Lead type --- -20C to 70C Sleeve: 0C to 70C Vinyl-covered NETU 0C to 150C Sleeve: 0C to 100C Glass-wool-covered with external shield of stainless 6. Lead length (M) Specify the length in meters in the following range for the E52@@AY only. Range: 1 to 100 m 7. Protective tubing material Length (L) Code 50, 75, 100 3. Terminal AY: Exposed lead wires (Y-type crimp terminal for M3.5) (element type: K, J) B-N: Exposed terminals (element type: K, J) C-N: Enclosed terminals (element type: K, J, R) Protective tubing material Element type --- ASTM316L SUS310S SUS310S K, J K, D = 10 to 22 PT1 JIS ceramic Cat.1 R PT0 JIS special ceramic R Examples Element: K; protective tubing length: 420 mm, exposed leads, protective tubing dia.: 4.8 mm, heat resistive, lead length: 10 m E52-CA42AY D=4.8 NETU 10M Element: J; protective tubing length: 360 mm, enclosed terminals, protective tubing dia.: 3.2 E52-IC36C-N D=3.2 8 E52 Sheathed Thermocouples Specifications Permissible Temperature in Dry Air Element type D K (CA), J(IC) Class JIS class 2 (0.75) Thermal contact Non-grounded type Sheath material CA: ASTM316L Element wire K (CA) ASTM316L IC: ASTM316L J (IC) ASTM316L 1 dia. 650C 450C 1.6 dia. 650C 450C 3.2 dia. 750C 650C 4.8 dia. 800C 750C 6.4 dia. 800C 750C 8.0 dia. 900C 750C Note: For details on the permissible temperature, refer to page D-5 of Introduction of Temperature Controllers (Cat. No. H900). Exposed-lead Models E52-CA@AY Dimensions Y-type crimp terminal for M3.5 Red (+) Lead wire (See note 1.) Unit (mm) SUS304 sleeve (See note 2.) Sheath (ASTM316L) d White (-) M d l 1 dia. 8 55 1.6 dia. 8 55 3.2 dia. 8 55 1 dia. 650C 55 1.6 dia. 650C 55 3.2 dia. 750C 55 4.8 dia. 800C 6.4 dia. 800C 8.0 dia. 900C D D L Permissible Temperature in Dry Air 4.8 dia. Note: 1. Lead Wire (Compensating Conductor) * Standard (-20C to 70C): 6.4 dia. Fully vinyl-covered with seven 0.3-dia. conductors (0.5 mm 8 dia. thick) and external dimensions of 2.4 x 4.1. * Heat Resistive (0C to 150C): Fully glass-wool-covered with seven 0.3-dia. conductors (0.5 mm thick) with external shield of stainless steel and external dimensions of 2.8 x 4.6 The heat-resistive lead wires cannot be used in locations exposed to water or other liquids. * Lead Wire Length (M): 1, 2, 4, or 8 m 2. The sleeve resists temperatures ranging between -20C and 70C for standard models and 0C and 100C for heat-resistive models. 8 11 11 D Element wire K (CA) ASTM316L K (CA) Model Information (E52-CA@AY) Model Information Custom-made models are available on request. Refer to Model Number Legend on page 8 for details. Terminal type Protective Protective tubing diameter tubing length L D (mm) (cm) Lead wire type Lead wire length M (m) 1 2 4 8 Model Exposed-lead Models 1 dia. 15 20 35 1.6 dia. 15 20 35 Standard E52-CA15AY D=1 1M E52-CA15AY D=1 2M E52-CA15AY D=1 4M E52-CA15AY D=1 8M Heat resistive E52-CA15AY D=1 NETU 1M E52-CA15AY D=1 NETU 2M E52-CA15AY D=1 NETU 4M E52-CA15AY D=1 NETU 8M Standard E52-CA20AY D=1 1M E52-CA20AY D=1 2M E52-CA20AY D=1 4M E52-CA20AY D=1 8M Heat resistive E52-CA20AY D=1 NETU 1M E52-CA20AY D=1 NETU 2M E52-CA20AY D=1 NETU 4M E52-CA20AY D=1 NETU 8M Standard E52-CA35AY D=1 1M E52-CA35AY D=1 2M E52-CA35AY D=1 4M E52-CA35AY D=1 8M Heat resistive E52-CA35AY D=1 NETU 1M E52-CA35AY D=1 NETU 2M E52-CA35AY D=1 NETU 4M E52-CA35AY D=1 NETU 8M Standard E52-CA15AY D=1.6 1M E52-CA15AY D=1.6 2M E52-CA15AY D=1.6 4M E52-CA15AY D=1.6 8M Heat resistive E52-CA15AY D=1.6 NETU 1M E52-CA15AY D=1.6 NETU 2M E52-CA15AY D=1.6 NETU 4M E52-CA15AY D=1.6 NETU 8M Standard E52-CA20AY D=1.6 1M E52-CA20AY D=1.6 2M E52-CA20AY D=1.6 4M E52-CA20AY D=1.6 8M Heat resistive E52-CA20AY D=1.6 NETU 1M E52-CA20AY D=1.6 NETU 2M E52-CA20AY D=1.6 NETU 4M E52-CA20AY D=1.6 NETU 8M Standard E52-CA35AY D=1.6 1M E52-CA35AY D=1.6 2M E52-CA35AY D=1.6 4M E52-CA35AY D=1.6 8M Heat resistive E52-CA35AY D=1.6 NETU 1M E52-CA35AY D=1.6 NETU 2M E52-CA35AY D=1.6 NETU 4M E52-CA35AY D=1.6 NETU 8M 9 E52 Terminal type Protective Protective tubing diameter tubing length L D (mm) (cm) Lead wire type Lead wire length M (m) 1 2 4 8 Model Exposed-lead Models 3.2 dia. 15 20 35 50 4.8 dia. 20 35 50 6.4 dia. 20 35 50 8 dia. 20 35 50 Standard E52-CA15AY D=3.2 1M E52-CA15AY D=3.2 2M E52-CA15AY D=3.2 4M E52-CA15AY D=3.2 8M Heat resistive E52-CA15AY D=3.2 NETU 1M E52-CA15AY D=3.2 NETU 2M E52-CA15AY D=3.2 NETU 4M E52-CA15AY D=3.2 NETU 8M Standard E52-CA20AY D=3.2 1M E52-CA20AY D=3.2 2M E52-CA20AY D=3.2 4M E52-CA20AY D=3.2 8M Heat resistive E52-CA20AY D=3.2 NETU 1M E52-CA20AY D=3.2 NETU 2M E52-CA20AY D=3.2 NETU 4M E52-CA20AY D=3.2 NETU 8M Standard E52-CA35AY D=3.2 1M E52-CA35AY D=3.2 2M E52-CA35AY D=3.2 4M E52-CA35AY D=3.2 8M Heat resistive E52-CA35AY D=3.2 NETU 1M E52-CA35AY D=3.2 NETU 2M E52-CA35AY D=3.2 NETU 4M E52-CA35AY D=3.2 NETU 8M Standard E52-CA50AY D=3.2 1M E52-CA50AY D=3.2 2M E52-CA50AY D=3.2 4M E52-CA50AY D=3.2 8M Heat resistive E52-CA50AY D=3.2 NETU 1M E52-CA50AY D=3.2 NETU 2M E52-CA50AY D=3.2 NETU 4M E52-CA50AY D=3.2 NETU 8M Standard E52-CA20AY D=4.8 1M E52-CA20AY D=4.8 2M E52-CA20AY D=4.8 4M E52-CA20AY D=4.8 8M Heat resistive E52-CA20AY D=4.8 NETU 1M E52-CA20AY D=4.8 NETU 2M E52-CA20AY D=4.8 NETU 4M E52-CA20AY D=4.8 NETU 8M Standard E52-CA35AY D=4.8 1M E52-CA35AY D=4.8 2M E52-CA35AY D=4.8 4M E52-CA35AY D=4.8 8M Heat resistive E52-CA35AY D=4.8 NETU 1M E52-CA35AY D=4.8 NETU 2M E52-CA35AY D=4.8 NETU 4M E52-CA35AY D=4.8 NETU 8M Standard E52-CA50AY D=4.8 1M E52-CA50AY D=4.8 2M E52-CA50AY D=4.8 4M E52-CA50AY D=4.8 8M Heat resistive E52-CA50AY D=4.8 NETU 1M E52-CA50AY D=4.8 NETU 2M E52-CA50AY D=4.8 NETU 4M E52-CA50AY D=4.8 NETU 8M Standard E52-CA20AY D=6.4 1M E52-CA20AY D=6.4 2M E52-CA20AY D=6.4 4M E52-CA20AY D=6.4 8M Heat resistive E52-CA20AY D=6.4 NETU 1M E52-CA20AY D=6.4 NETU 2M E52-CA20AY D=6.4 NETU 4M E52-CA20AY D=6.4 NETU 8M Standard E52-CA35AY D=6.4 1M E52-CA35AY D=6.4 2M E52-CA35AY D=6.4 4M E52-CA35AY D=6.4 8M Heat resistive E52-CA35AY D=6.4 NETU 1M E52-CA35AY D=6.4 NETU 2M E52-CA35AY D=6.4 NETU 4M E52-CA35AY D=6.4 NETU 8M Standard E52-CA50AY D=6.4 1M E52-CA50AY D=6.4 2M E52-CA50AY D=6.4 4M E52-CA50AY D=6.4 8M Heat resistive E52-CA50AY D=6.4 NETU 1M E52-CA50AY D=6.4 NETU 2M E52-CA50AY D=6.4 NETU 4M E52-CA50AY D=6.4 NETU 8M Standard E52-CA20AY D=8 1M E52-CA20AY D=8 2M E52-CA20AY D=8 4M E52-CA20AY D=8 8M Heat resistive E52-CA20AY D=8 NETU 1M E52-CA20AY D=8 NETU 2M E52-CA20AY D=8 NETU 4M E52-CA20AY D=8 NETU 8M Standard E52-CA35AY D=8 1M E52-CA35AY D=8 2M E52-CA35AY D=8 4M E52-CA35AY D=8 8M Heat resistive E52-CA35AY D=8 NETU 1M E52-CA35AY D=8 NETU 2M E52-CA35AY D=8 NETU 4M E52-CA35AY D=8 NETU 8M Standard E52-CA50AY D=8 1M E52-CA50AY D=8 2M E52-CA50AY D=8 4M E52-CA50AY D=8 8M Heat resistive E52-CA50AY D=8 NETU 1M E52-CA50AY D=8 NETU 2M E52-CA50AY D=8 NETU 4M E52-CA50AY D=8 NETU 8M 10 E52 Exposed-lead Models E52-IC@AY Dimensions Red (+) Unit (mm) Y-type crimp terminal for M3.5 SUS304 sleeve (See note 2.) Sheath (ASTM316L) Lead wire (See note 1.) d White (-) M d l 1 dia. 8 55 1.6 dia. 8 55 3.2 dia. 8 55 1 dia. 450C 450C D D L Note: 1. Lead Wire (Compensating Conductor) * Standard (-20C to 70C): Fully vinyl-covered with seven 0.3-dia. conductors (0.5 mm thick) and external dimensions of 2.4 x 4.1. * Heat Resistive (0C to 150C): Fully glass-wool-covered with seven 0.3-dia. conductors (0.5 mm thick) with external shield of stainless steel and external dimensions of 2.8 x 4.6 The heat-resistive lead wires cannot be used in locations exposed to water or other liquids. * Lead Wire Length (M): 1, 2, 4, or 8 m 2. The sleeve resists temperatures ranging between -20C and 70C for standard models and 0C and 100C for heat-resistive models. Permissible Temperature in Dry Air D Element wire J (IC) ASTM316L 4.8 dia. 8 55 1.6 dia. 6.4 dia. 11 55 3.2 dia. 650C 55 4.8 dia. 750C 6.4 dia. 750C 8.0 dia. 750C 8 dia. 11 J (IC) Model Information (E52-IC@AY) Model Information Custom-made models are available on request. Refer to Model Number Legend on page 8 for details Terminal type Protective tubing diameter D (mm) Exposed-lead 1 dia. Models Protective tubing length L (cm) Lead wire length M (m) 1 2 4 Model 15 20 35 1.6 dia. Lead wire type 15 20 35 Standard E52-IC15AY D=1 1M E52-IC15AY D=1 2M E52-IC15AY D=1 4M Heat resistive E52-IC15AY D=1 NETU 1M E52-IC15AY D=1 NETU 2M E52-IC15AY D=1 NETU 4M Standard E52-IC20AY D=1 1M E52-IC20AY D=1 2M E52-IC20AY D=1 4M Heat resistive E52-IC20AY D=1 NETU 1M E52-IC20AY D=1 NETU 2M E52-IC20AY D=1 NETU 4M Standard E52-IC35AY D=1 1M E52-IC35AY D=1 2M E52-IC35AY D=1 4M Heat resistive E52-IC35AY D=1 NETU 1M E52-IC35AY D=1 NETU 2M E52-IC35AY D=1 NETU 4M Standard E52-IC15AY D=1.6 1M E52-IC15AY D=1.6 2M E52-IC15AY D=1.6 4M Heat resistive E52-IC15AY D=1.6 NETU E52-IC15AY D=1.6 NETU E52-IC15AY D=1.6 NETU 1M 2M 4M Standard E52-IC20AY D=1.6 1M Heat resistive E52-IC20AY D=1.6 NETU E52-IC20AY D=1.6 NETU E52-IC20AY D=1.6 NETU 1M 2M 4M E52-IC20AY D=1.6 2M E52-IC35AY D=1.6 2M E52-IC20AY D=1.6 4M Standard E52-IC35AY D=1.6 1M Heat resistive E52-IC35AY D=1.6 NETU E52-IC35AY D=1.6 NETU E52-IC35AY D=1.6 NETU 1M 2M 4M E52-IC35AY D=1.6 4M 11 E52 Terminal type Protective tubing diameter D (mm) Exposed-lead 3.2 dia. Models Protective tubing length L (cm) 15 35 50 20 35 50 6.4 dia. 20 35 50 8 dia. Lead wire length M (m) 1 2 4 Model 20 4.8 dia. Lead wire type 20 35 50 Standard E52-IC15AY D=3.2 1M Heat resistive E52-IC15AY D=3.2 NETU E52-IC15AY D=3.2 NETU E52-IC15AY D=3.2 NETU 1M 2M 4M E52-IC15AY D=3.2 2M E52-IC20AY D=3.2 2M E52-IC15AY D=3.2 4M Standard E52-IC20AY D=3.2 1M Heat resistive E52-IC20AY D=3.2 NETU E52-IC20AY D=3.2 NETU E52-IC20AY D=3.2 NETU 1M 2M 4M E52-IC35AY D=3.2 2M E52-IC20AY D=3.2 4M Standard E52-IC35AY D=3.2 1M Heat resistive E52-IC35AY D=3.2 NETU E52-IC35AY D=3.2 NETU E52-IC35AY D=3.2 NETU 1M 2M 4M E52-IC50AY D=3.2 2M E52-IC35AY D=3.2 4M Standard E52-IC50AY D=3.2 1M Heat resistive E52-IC50AY D=3.2 NETU E52-IC50AY D=3.2 NETU E52-IC50AY D=3.2 NETU 1M 2M 4M Standard E52-IC20AY D=4.8 1M Heat resistive E52-IC20AY D=4.8 NETU E52-IC20AY D=4.8 NETU E52-IC20AY D=4.8 NETU 1M 2M 4M E52-IC20AY D=4.8 2M E52-IC35AY D=4.8 2M E52-IC50AY D=3.2 4M E52-IC20AY D=4.8 4M Standard E52-IC35AY D=4.8 1M Heat resistive E52-IC35AY D=4.8 NETU E52-IC35AY D=4.8 NETU E52-IC35AY D=4.8 NETU 1M 2M 4M E52-IC50AY D=4.8 2M E52-IC35AY D=4.8 4M Standard E52-IC50AY D=4.8 1M Heat resistive E52-IC50AY D=4.8 NETU E52-IC50AY D=4.8 NETU E52-IC50AY D=4.8 NETU 1M 2M 4M Standard E52-IC20AY D=6.4 1M Heat resistive E52-IC20AY D=6.4 NETU E52-IC20AY D=6.4 NETU E52-IC20AY D=6.4 NETU 1M 2M 4M E52-IC20AY D=6.4 2M E52-IC35AY D=6.4 2M E52-IC50AY D=4.8 4M E52-IC20AY D=6.4 4M Standard E52-IC35AY D=6.4 1M Heat resistive E52-IC35AY D=6.4 NETU E52-IC35AY D=6.4 NETU E52-IC35AY D=6.4 NETU 1M 2M 4M E52-IC50AY D=6.4 2M E52-IC35AY D=6.4 4M Standard E52-IC50AY D=6.4 1M Heat resistive E52-IC50AY D=6.4 NETU E52-IC50AY D=6.4 NETU E52-IC50AY D=6.4 NETU 1M 2M 4M E52-IC50AY D=6.4 4M Standard E52-IC20AY D=8 1M E52-IC20AY D=8 2M E52-IC20AY D=8 4M Heat resistive E52-IC20AY D=8 NETU 1M E52-IC20AY D=8 NETU 2M E52-IC20AY D=8 NETU 4M Standard E52-IC35AY D=8 1M E52-IC35AY D=8 2M E52-IC35AY D=8 4M Heat resistive E52-IC35AY D=8 NETU 1M E52-IC35AY D=8 NETU 2M E52-IC35AY D=8 NETU 4M Standard E52-IC50AY D=8 1M E52-IC50AY D=8 2M E52-IC50AY D=8 4M Heat resistive E52-IC50AY D=8 NETU 1M E52-IC50AY D=8 NETU 2M E52-IC50AY D=8 NETU 4M 12 E52 Exposed-terminal Models E52-CA@B-N E52-IC@B-N Dimensions Permissible Temperature in Dry Air Dimensions are given in millimeters, except for the length (L), which is provided in centimeters. 38.5 Sheath (ASTM316L) Socket (SUS304) D - Caulking (See note) 15 16 Element wire K (CA) ASTM316L Terminal box + 44 D J (IC) ASTM316L 3.2 dia. 750C 650C 4.8 dia. 800C 750C 6.4 dia. 800C 750C 8.0 dia. 900C 750C L-40 Two, M3 Terminal box: The permissible temperature is 0C to 100C. Note: The length L is in centimeters, but "40" is 40 millimeters. Therefore, for the E52-CA50B-N: L = 50 (cm), the sheath length L - 40 = 500 - 40 = 460 mm. Model Information Custom-made models are available on request. Refer to Model Number Legend on page 8 for details. Element type Terminal type Protective tubing length L (cm) Protective tubing diameter D (mm) 3.2 dia. 4.8 dia. 6.4 dia. 8 dia. Model K (CA) Exposed-terminal Models J (IC) Exposed-terminal Models 20 E52-CA20B-N D=3.2 E52-CA20B-N D=4.8 E52-CA20B-N D=6.4 --- 35 E52-CA35B-N D=3.2 E52-CA35B-N D=4.8 E52-CA35B-N D=6.4 E52-CA35B-N D=8 50 E52-CA50B-N D=3.2 E52-CA50B-N D=4.8 E52-CA50B-N D=6.4 E52-CA50B-N D=8 75 --- E52-CA75B-N D=4.8 E52-CA75B-N D=6.4 E52-CA75B-N D=8 20 E52-IC20B-N D=3.2 E52-IC20B-N D=4.8 E52-IC20B-N D=6.4 --- 35 E52-IC35B-N D=3.2 E52-IC35B-N D=4.8 E52-IC35B-N D=6.4 E52-IC35B-N D=8 50 E52-IC50B-N D=3.2 E52-IC50B-N D=4.8 E52-IC50B-N D=6.4 E52-IC50B-N D=8 75 --- E52-IC75B-N D=4.8 E52-IC75B-N D=6.4 E52-IC75B-N D=8 Enclosed-terminal Models E52-CA@C-N E52-IC@C-N Dimensions Dimensions are given in millimeters, except for the length (L), which is provided in centimeters. 67 Socket (SUS304) Sheath (ASTM316L) Permissible Temperature in Dry Air D Element wire K (CA) ASTM316L Chain D 66 Caulking Terminal box (See note) G3/8, Packing internal diameter 6.5 dia. 40 L-40 Use wiring terminals that fit M3 screws. J (IC) ASTM316L 3.2 dia. 750C 650C 4.8 dia. 800C 750C 6.4 dia. 800C 750C 8.0 dia. 900C 750C Terminal box: The permissible temperature is 0C to 90C. Note: The terminals in the cap indicate polarity (+ or -). Note: The length L is in centimeters, but "40" is 40 millimeters. Therefore, for the E52-CA35C-N: L = 35 (cm), the sheath length L - 40 = 350 - 40 = 310 mm. Model Information Custom-made models are available on request. Refer to Model Number Legend on page 8 for details. Element type Terminal type Protective tubing length L (cm) Protective tubing diameter D (mm) 3.2 dia. 4.8 dia. 6.4 dia. 8 dia. Model K (CA) J (IC) Enclosed-terminal Models Enclosed-terminal Models 20 E52-CA20C-N D=3.2 E52-CA20C-N D=4.8 E52-CA20C-N D=6.4 --- 35 E52-CA35C-N D=3.2 E52-CA35C-N D=4.8 E52-CA35C-N D=6.4 E52-CA35C-N D=8 50 E52-CA50C-N D=3.2 E52-CA50C-N D=4.8 E52-CA50C-N D=6.4 E52-CA50C-N D=8 75 --- E52-CA75C-N D=4.8 E52-CA75C-N D=6.4 E52-CA75C-N D=8 20 E52-IC20C-N D=3.2 E52-IC20C-N D=4.8 E52-IC20C-N D=6.4 --- 35 E52-IC35C-N D=3.2 E52-IC35C-N D=4.8 E52-IC35C-N D=6.4 E52-IC35C-N D=8 50 E52-IC50C-N D=3.2 E52-IC50C-N D=4.8 E52-IC50C-N D=6.4 E52-IC50C-N D=8 75 --- E52-IC75C-N D=4.8 E52-IC75C-N D=6.4 E52-IC75C-N D=8 13 E52 Standard Thermocouples Specifications Permissible Temperature in Dry Air (See note.) D Element wire K (CA), J(IC), R Class K (CA), J (IC) JIS class 2 (0.75) Protective tubing material J (IC) SUS316 R, JIS class 2 (0.25) 10 dia. 750C 450C K (CA) SUS316 12 dia. 850C 500C J (IC) 15 dia. 850C 550C 22 dia. 900C 600C SUS316 R (See JIS ceramic cat. 1 (PT1) note.) JIS special ceramic (PT0) Thermal contact Element wire K (CA) SUS316 Note: For details on the permissible temperature, refer to Technical Guide for Temperature Sensors. Non-grounded type Note: Specify PT1 or PT0 if the element is R. D Element wire R 15 dia. 0C to 1,400C Exposed-terminal Models E52-CA@B-N E52-IC@B-N Dimensions Dimensions are given in millimeters, except for the length (L), which is provided in centimeters. 49.5 Terminal box Socket (SUS304) SUS316 protective tubing + 70 D - 5 (See note) 25 L-50 Two, M4 Terminal box: The permissible temperature is 0C to 100C. Note: The length L is in centimeters, but "50" is 50 millimeters. Therefore, for the E52-CA75B-N: L = 75 (cm), the protective tubing length L - 50 = 750 - 50 = 700 mm. Permissible Temperature in Dry Air D Element wire K (CA) SUS316 J (IC) SUS316 10 dia. 750C 450C 12 dia. 850C 500C 15 dia. 850C 550C 22 dia. 900C 600C Model Information Custom-made models are available on request. Refer to Model Number Legend on page 8 for details. Element type Terminal type Protective tubing length L (cm) Protective tubing diameter D (mm) 10 dia. 12 dia. 15 dia. 22 dia. Model K (CA) J (IC) Exposed-terminal Models Exposed-terminal Models 35 E52-CA35B-N D=10 E52-CA35B-N D=12 E52-CA35B-N D=15 --- 50 E52-CA50B-N D=10 E52-CA50B-N D=12 E52-CA50B-N D=15 E52-CA50B-N D=22 75 E52-CA75B-N D=10 E52-CA75B-N D=12 E52-CA75B-N D=15 E52-CA75B-N D=22 100 E52-CA100B-N D=10 E52-CA100B-N D=12 E52-CA100B-N D=15 E52-CA100B-N D=22 35 E52-IC35B-N D=10 E52-IC35B-N D=12 E52-IC35B-N D=15 --- 50 E52-IC50B-N D=10 E52-IC50B-N D=12 E52-IC50B-N D=15 E52-IC50B-N D=22 75 E52-IC75B-N D=10 E52-IC75B-N D=12 E52-IC75B-N D=15 E52-IC75B-N D=22 100 E52-IC100B-N D=10 E52-IC100B-N D=12 E52-IC100B-N D=15 E52-IC100B-N D=22 14 E52 Enclosed-terminal Models E52-CA@C-N E52-IC@C-N Dimensions Dimensions are given in millimeters, except for the length (L), which is provided in centimeters. 96 Terminal box SUS316 protective tubing Chain 86 D Socket (SUS304) 40 dia. 5 (See note) 53 L-50 1 G /2, Packing internal diameter 9 dia. Note: The length L is in centimeters, but "50" is 50 millimeters. Therefore, for the E52-CA50C-N: L = 50 (cm), the protective tubing length L - 50 = 500 - 50 = 450 mm. Permissible Temperature in Dry Air D Element wire K (CA) SUS316 J (IC) SUS316 10 dia. 0 to 750C 0 to 450C 12 dia. 0 to 850C 0 to 500C 15 dia. 0 to 850C 0 to 550C 22 dia. 0 to 900C 0 to 600C Terminal box: The permissible temperature is 0C to 90C. Note: The terminals in the cap indicate polarity (+ or -). Model Information Custom-made models are available on request. Refer to Model Number Legend on page 8 for details Element type Terminal type Protective tubing length L (cm) Protective tubing diameter D (mm) 10 dia. 12 dia. 15 dia. 22 dia. Model K (CA) J (IC) Enclosed-terminal Models Enclosed-terminal Models 35 E52-CA35C-N D=10 E52-CA35C-N D=12 E52-CA35C-N D=15 --- 50 E52-CA50C-N D=10 E52-CA50C-N D=12 E52-CA50C-N D=15 E52-CA50C-N D=22 75 E52-CA75C-N D=10 E52-CA75C-N D=12 E52-CA75C-N D=15 E52-CA75C-N D=22 100 E52-CA100C-N D=10 E52-CA100C-N D=12 E52-CA100C-N D=15 E52-CA100C-N D=22 35 E52-IC35C-N D=10 E52-IC35C-N D=12 E52-IC35C-N D=15 50 E52-IC50C-N D=10 E52-IC50C-N D=12 E52-IC50C-N D=15 --E52-IC50C-N D=22 75 E52-IC75C-N D=10 E52-IC75C-N D=12 E52-IC75C-N D=15 --- 100 E52-IC100C-N D=10 E52-IC100C-N D=12 E52-IC100C-N D=15 --- 15 E52 Enclosed-terminal Models (High-temperature Use) E52-PR@C-N Dimensions Dimensions are given in millimeters, except for the length (L), which is provided in centimeters. 96 Terminal box SUS304 Porcelain protective tube When L = 500 Swing of protective tube: 6 mm or less Chain Permissible Temperature in Dry Air D Element wire R 22 dia. 86 15 dia. Lock nut (SUS304) Filled with heat resistant cement 40 dia. 5 (See note) 100 53 L-150 G1/2, Packing internal diameter 9 dia. Use wiring terminals that fit M4 screws. 15 dia. 0C to 1,400C Terminal box: The permissible temperature is 0C to 90C. Note: The terminals in the cap indicate polarity (+ or -). Note: The length L is in centimeters, but "150" is 150 millimeters. Therefore, for the E52-PR75C-N: L = 75 (cm), the protective tubing length L - 150 = 750 - 150 = 600 mm. Model Information Element type Terminal type Protective tubing length L (cm) Protective tubing diameter D (mm) 15 dia. Model R (See note 1.) Enclosed-ter- 50 minal Models 75 100 R (See note 2.) Enclosed-ter- 50 minal Models 75 100 Standard E52-PR50C-N D=15 PT1 E52-PR75C-N D=15 PT1 E52-PR100C-N D=15 PT1 E52-PR50C-N D=15 PT0 E52-PR75C-N D=15 PT0 E52-PR100C-N D=15 PT0 Protective tubing material Permissible temperature in dry air Note 1: JIS ceramic Cat.1 (PT1) Mullite, high alumina, etc. 1,500C (See note.) Note 2: JIS special ceramic (PT0) Recrystallized alumina, fused alumina, etc. 1,700C (See note.) Note: The permissible temperature given for the protective tubing is higher than 1,400C, but the permissible temperature of the thermocouple element wire is only 1,400C. Therefore, the protective tubing of the E52-PR@C-N can withstand high temperatures momentarily to the levels given in the table as exceptions, but the element wire will deteriorate quickly if the thermocouple is used regularly at temperatures that exceed the permissible temperature for the element wire. 16 E52 Low-cost Models Low-cost Platinum Resistance Thermometers Exposed-lead Models with Screws Specifications E52-P6DY Element type Pt100 Dimensions Conductor type 3-conductor system Class Class B Protective tubing material SUS304 Sensor length 30 mm Max. detectable temperature 250C Temperature range -50C to 250C Lead wire -50C to 150C Tapered pipe thread Argon arc welding SUS304 R1/8 Silicone tubing SUS304 (t0.25) Caulking 4 dia. Fluororesin-covered wire with 1.0 outer dia. each (PFA) 7/0.18 Red (A) Black (B) 14 30 10 6 65 15 Black (B) Y-type crimp terminal for M3.5 M Note: The protective tubing is of pipe construction, which must not be bent. Lead wire length (m) Model 1 E52-P6DY 1M 2 E52-P6DY 2M 4 E52-P6DY 4M Exposed-lead Models with Flange Specifications E52-P6FY Element wire Pt100 Dimensions Conductor type 3-conductor system Class Class B Protective tubing material SUS304 Sensor length 30 mm Max. detectable temperature 250C Temperature range -50C to 250C Lead wire -50C to 150C Flange 120 SUS304 Three, 3.5 dia. 120 SUS304 (t0.25) 4 dia. Fluororesin-covered wire with 1.0 outer dia. each Silicone tubing (PFA) 7/0.18 Caulking Red (A) White (B) 1 20 dia. 30 dia. 65 Silver soldering Y-type crimp 30 terminal for M3.5 M 15 White (B) Note: The protective tubing is of pipe construction, which must not be bent. Lead wire length (m) Model 1 E52-P6FY 1M 2 E52-P6FY 2M 4 E52-P6FY 4M Exposed-lead Models Specifications E52-P10AEY Element type Pt100 Dimensions Conductor type 3-conductor system Class Class B Protective tubing material SUS316 Max. detectable temperature 250C Temperature range 0C to 250C Lead wire -50C to 180C Product label Y-type crimp terminal for M3.5 M 100 Fluororesin-covered wire with 1.0 outer dia. each (PFA) 7/0.2 (30) White (B) B B A 3.2 dia. Caulking Silicone shrinkable tubing Shrinkable tube (black) White (B) Red (A) Marker tube Note: 1. The protective tubing is of pipe construction, which must not be bent. 2. A Compression Fitting (PT@) cannot be used for mounting. Lead wire length (m) Model 1 E52-P10AEY 1M 2 E52-P10AEY 2M 4 E52-P10AEY 4M 17 E52 Low-cost Thermocouples Exposed-lead Models with Spring E52-CA@ASY, E52-IC@ASY Specifications Dimensions Element type K (CA), J (IC) Element dia. 0.65 mm (single wire) Class Class 2 (0.75) L3 SUS304 (t0.4) Protective tubing material SUS304 Thermal contact Non-grounded type Temperature range 0C to 400C: K (CA) 0C to 350C: J (IC) Lead wire 0C to 180C 32 12 dia. 150 Marker tube(White) Lead Wire(Red) M 80 (+) + 4.8 dia. Note: The sleeve resists temperatures ranging between 0C and 100C. Sleeve Brass-nickel Closely wound plating spring coil - (-) Y-type crimp terminal for M3.5 Marker tube(White) Lead Wire (White) Fully glass-wool-covered compensating cable with Color code four 0.65-dia. conductors (K: Blue, J: Yellow) and external dimensions of approx. 5.1 x 3.0 L: Protective tubing length M: Lead wire length Note: The protective tubing is of pipe construction, which must not be bent. Protective tubing length (mm) Lead wire length (m) Element type: K (CA) Element type: J (IC) Model 65 100 150 200 1 E52-CA6ASY 1M E52-IC6ASY 1M 2 E52-CA6ASY 2M E52-IC6ASY 2M 4 E52-CA6ASY 4M E52-IC6ASY 4M 1 E52-CA10ASY 1M E52-IC10ASY 1M 2 E52-CA10ASY 2M E52-IC10ASY 2M 4 E52-CA10ASY 4M E52-IC10ASY 4M 1 E52-CA15ASY 1M E52-IC15ASY 1M 2 E52-CA15ASY 2M E52-IC15ASY 2M 4 E52-CA15ASY 4M E52-IC15ASY 4M 1 E52-CA20ASY 1M E52-IC20ASY 1M 2 E52-CA20ASY 2M E52-IC20ASY 2M 4 E52-CA20ASY 4M E52-IC20ASY 4M 18 E52 Exposed-lead Models with Screw E52-CA1DY, E52-IC1DY Specifications Dimensions Element type K (CA), J (IC) Element dia. 0.65 mm (single wire) Class Class 2 (0.75) Protective tubing material SUS304 Thermal contact Grounded type Temperature range 0.65-dia. 2.8 thermocouple element B 3.8 dia. 0C to 400C: K (CA) 0C to 350C: J (IC) Lead wire 0C to 180C Terminal shape Y-type crimp terminal for M3.5 Note: 1. The thermocouple is a single wire from the tip to the terminal. 2. Specify the type of screw (i.e., M6, M8, or W1/4) when ordering. 3. The thermocouple is not of airtight construction. 4. OMRON recommends that the tip of the thermocouple is touching the sensing object. Installation Example Movable ring (brass) 10 A C M Color tubing Brass (K: Blue, J: Yellow) 80 0.65-dia. black wire Movable ring Brass Cut after silver soldering Red (+) White (-) Color code 5 dia. (K: Blue, SUS304 Crimp terminal for M3.5 J: Yellow) screw (W1/4) Enamel-bonded copper wire Fully glass-wool-covered with external copper shield and external dimensions of approx. 3.1 x 2.0 Internal Construction (E52-CA1DY) Closely wound enamel-bonded coil. M6 Lead wire length (m) Screw W1/4 M6 M8 A (mm) 4.3 4 5.3 B (mm) 11.5 11.5 15 C (mm) 3.8 3.8 3.8 Brass pipe Screw Cut a thread into the workpiece, and screw in the thermocouple while pushing in so that the tip makes complete contact. End 1 Shielded glass-wool lead wire Workpiece Note: E52-CA1DY with the same shape and multiple element wires are also available (E52-CA1DY-40). Refer to page 26 for details. Protective tubing length (mm) Lead wire length (m) Element type: K (CA) Element type: J (IC) Model M6 screw M8 screw W1/4 screw 1 E52-CA1DY M6 1M E52-IC1DY M6 1M 2 E52-CA1DY M6 2M E52-IC1DY M6 2M 4 E52-CA1DY M6 4M E52-IC1DY M6 4M 1 E52-CA1DY M8 1M E52-IC1DY M8 1M 2 E52-CA1DY M8 2M E52-IC1DY M8 2M 4 E52-CA1DY M8 4M E52-IC1DY M8 4M 1 E52-CA1DY W1/4 1M E52-IC1DY W1/4 1M 2 E52-CA1DY W1/4 2M E52-IC1DY W1/4 2M 4 E52-CA1DY W1/4 4M E52-IC1DY W1/4 4M 19 E52 Exposed-lead Models with Flange Specifications E52-CA6F-N, E52-IC6F-N Element type K (CA), J (IC) Dimensions Class Class 2 (0.75) Protective tubing material SUS304 Lead wire 0 12 4 dia. Fluororesin-covered thermocouple wire with external Silicon dimensions of 1.6 x 1.0 (CA) and 1.6 x 1.0 (IC) Peel processed shrinkable tube Caulking SUS304 SUS304 Red (+) 0 Temperature range 12 Thermal contact Grounded type Silver soldering Three, 3.5 dia. White (-) 0C to 350C: K (CA) 0C to 350C: J (IC) 1 20 dia. 652 15 Shrinkable tube 30 10 8010 M Lead wire length (M): 1, 2, or 4 m 30 dia. 0C to 150C Note: 1. The thermocouple is a single wire from the tip to the terminal. 2. The protective tubing is of pipe construction, which must not be bent. Lead wire length (m) Element type: K (CA) Element type: J (IC) Model 1 E52-CA6F-N 1M E52-IC6F-N 1M 2 E52-CA6F-N 2M E52-IC6F-N 2M 4 E52-CA6F-N 4M E52-IC6F-N 4M Exposed-lead Models with Screws Specifications E52-CA6D-N, E52-IC6D-N Element type K (CA), J (IC) Dimensions Class Class 2 (0.75) Protective tubing material SUS304 Tapered pipe thread 14 SUS304 R 1/8 4 dia. Fluororesin-covered thermocouple wire with external dimensions of 1.6 x 1.0 (CA) and 1.6 x 1.0 (IC) Silicon shrinkable tube Peel processed Caulking Red (+) Thermal contact Grounded type Temperature range Lead wire White (-) 0C to 350C: K (CA) 0C to 350C: J (IC) 0C to 150C 6 652 15 Shrinkable tube 30 8010 10 M Lead wire length (M): 1, 2, or 4 m Note: 1. The thermocouple is a single wire from the tip to the terminal. 2. The protective tubing is of pipe construction, which must not be bent. Lead wire length (m) Element type: K (CA) Element type: J (IC) Model 1 E52-CA6D-N 1M E52-IC6D-N 1M 2 E52-CA6D-N 2M E52-IC6D-N 2M 4 E52-CA6D-N 4M E52-IC6D-N 4M Exposed-lead Models Specifications E52-CA10AE-N, E52-IC10AE-N Element type K (CA), J (IC) Dimensions Class Class 2 (0.75) Protective tubing material SUS304 Fluororesin-covered thermocouple wire with external dimensions of 1.6 x 1.0 (CA) and 1.6 x 1.0 (IC) Peel processed Protective tubing 3.2 dia. Thermal contact Non-grounded type Temperature range Lead wire 0C to 350C: K (CA) 0C to 200C: J (IC) 0C to 180C Red (+) White (-) Caulking SUS304 Shrinkable tube M 100 Note: 1. 2. 3. 4. 10 80 The thermocouple is a single wire from the tip to the terminal. Lead wire length M: 1, 2, or 4 m The protective tubing is of pipe construction, which must not be bent. The thermocouple cannot be mounted using a PT@ Compression Fitting. Lead wire length (m) Element type: K (CA) Element type: J (IC) Model 1 E52-CA10AE-N 1M E52-IC10AE-N 1M 2 E52-CA10AE-N 2M E52-IC10AE-N 2M 4 E52-CA10AE-N 4M E52-IC10AE-N 4M 20 E52 Exclusive Models Thermocouples Thermocouples for Molding Machines Specifications E52-CA2GVY, E52-IC2GVY Element type K (CA), J (IC) Dimensions Element diameter 1.0 mm (single wire) Class Class 2 (0.75) Protective tubing material SUS304 Glass-covered stainless steel shielded thermocouple wire Y-type crimp 12.5 dia. Spring terminal for M3.5 15 dia. 14 dia. Spring retainer Marker tube 6.8 dia. SUS304 4.1 dia. Bayonet - Temperature range 0C to 350C Lead wire 0C to 180C 4.8 dia. 252 15 5 dia. Red (+) + Thermal contact Grounded type Adapter (provided) (See note.) 22 Shrinkable tube 10010 8510 8 dia. 12 dia. White (-) 10 10 15 Note: The Adapter is included with the Thermocouple. If it is lost or damaged, you can order a replacement with the following model number. Adapter: Y92F-S1 M Lead wire length (M): 1 or 2 m Lead wire length (m) 1 R 8 Element type: K (CA) Element type: J (IC) Model 1 E52-CA2GVY 1M E52-IC2GVY 1M 2 E52-CA2GVY 2M E52-IC2GVY 2M Thermocouples with Crimp Terminals Specifications E52-CA1GTY, E52-IC1GTY Element type K (CA), J (IC) Dimensions Element diameter 0.65 mm (single wire) M4, round crimp terminal 8 Silicone tubing Class Class 2 (0.75) Glass-wool-braided shield with maximum external dimensions of 2.6 x 4.0 White/red stripe (+) Thermal contact Grounded type Temperature range 0C to 300C Lead wire 0C to 150C Terminal shape Y-type crimp terminal for M3.5 Note: The E52-CA1GTY is also available with double elements. Refer to page 26 for details. 4.3 dia. White stripe (-) Color code (K: Blue, J: Yellow) 6 dia. max. 15 80 Y-type crimp terminal for M3.5 M Lead wire length (M): 1 or 2 m Lead wire length (m) Element type: K (CA) Element type: J (IC) Model 1 E52-CA1GTY 1M E52-IC1GTY 1M 2 E52-CA1GTY 2M E52-IC1GTY 2M Platinum Resistance Thermometers Platinum Resistance Thermometers for Surface Temperature Measurement Specifications E52-P2GSY Element type Pt100 Dimensions Class Class B Protective tubing material SUS304 With brass-nickelplated bracket Conductor type 3-conductor system Temperature range -50C to 250C Lead wire -50C to 150C Brass-nickel-plated bracket Four, 3.2 dia. 3 Silicone-covered 3-conductor cable with thirty 0.08-dia. conductors (0.15-mm thick) and approx. 3.9 dia. Product label 6-dia. Marker tube Caulking A 5 201 5 B B 1.5 4.50 140.6 6 Silicon shrinkable tube 200.5 281 30 M Red (A) White (B) White (B) 30 Name plate A 80 Lead wire length (M): 1 or 2 m Lead wire length (m) Model 1 E52-P2GSY 1M 2 E52-P2GSY 2M 21 E52 Platinum Resistance Thermometers for Room Temperature Measurement Specifications E52-P10GRY Element type Pt100 Class Class B Protective tubing material SUS304 Conductor type 3-conductor system Dimensions 701 dia. 421 dia. Temperature range -50C to 60C Lead wire Two, 8 dia. Aluminum alloy AC3A 6.1 dia. 27 dia. -20C to 60C 69.51 6.1-outer-dia. vinyl-covered 3-conductor cable (twenty 0.18-dia. conductors, 0.5 mm thick) 22.2 dia. BS (Ni plated) 8.0 dia. SUS304 Enclosed resistance thermometer 56 (30) A B B 4.8 dia. 97 Lead wire length (m) 2 Red (A) White (B) Black (B) Marker tube Shrinkable tube 95 100 Y-type crimp terminal for M3.5 8510 2,000 Model E52-P10GRY 2M Waterproof Platinum Resistance Thermometers Specifications E52-P10GPY Element wire Pt100 Class Class B Protective tubing material SUS304 Conductor type Dimensions 6.1-outer-dia. vinyl-covered 3-conductor cable (twelve 0.18-dia. conductors, 0.5 mm thick) SUS304 protective tubing 3-conductor system -25C to 60C Resistive pressure 10 kg/cm max. 2 Marker tube Name plate 6.1 dia. A B B Temperature range 0C to 70C (underwater) -20C to 70C (in the air) Lead wire 20 dia. 7 dia. Y-type crimp terminal for M3.5 98 100 Shrinkable tube 12 62 5 Red (A) White (B) White (B) (30) 8510 M Lead wire length (M): 2 or 4 m Note: The lead wires are vinyl-covered, and cannot be used underwater. Use the E52-P5AY-40 if waterproof lead wires are required for use underwater. Refer to page 23 for details. Lead wire length (m) Model 2 E52-P10GPY 2M 4 E52-P10GPY 4M 22 E52 Corrosion-resistant Models with Fluororesin-covered Protective Tubing Thermocouples Exposed-lead Models Specifications E52-CA20AY-1 Element type K (CA) Class Class 2 (0.75) Protective tubing material ASTM316L with Fluororesin-covered (FEP) tube Thermal contact Non-grounded type Temperature range 0C to 180C Lead wire Vinyl-covered: -20C to 70C Dimensions Fixed with adhesive tape and silicone heat-shrinking tube Product label Y-type crimp terminal for M3.5 Red (+) White (-) Sleeve Compensating conductor Sheath d D + - Filled with epoxy resin 9010 FEP-covered tubing Caulking 200 2,000 Model Protective tubing diameter E52-CA20AY-1 D=4.6 2M D = 4.6 Sleeve diameter Covering (mm) thickness Sleeve length (mm) (mm) d=8 l = 55 E52-CA20AY-1 D=6 2M D = 6.0 E52-CA20AY-1 D=8 2M D = 8.0 0.7 Lead wire length (m) 2 0.6 d = 11 l = 55 0.8 Platinum Measurement Exposed-lead Models Specifications E52-P20AY-1 Element type Pt100 Class Class B Protective tubing material SUS316 with Fluororesin-covered (FEP) tube Conductor type 3-conductor system Temperature range -80C to 180C Lead wire Dimensions Y-type crimp terminal for M3.5 Lead wires Marker tube Red White White Fixed with adhesive tape and silicone heat-shrinking tube Filled with epoxy resin Sheath Sleeve (9.5 dia.) D A B B Shrinkable tube 8510 Vinyl-covered: -20C to 70C Model d FEP-covered tubing 35 2,000 205 Protective tubing diameter Sleeve diameter (mm) Coating thickness (mm) E52-P20AY-1 D=4.6 2M D = 4.6 d=8 0.7 E52-P20AY-1 D=6 2M D = 6.0 d=8 0.6 E52-P20AY-1 D=8 2M D = 8.0 d=8 0.8 Lead wire length (m) 2 FEP-molded Models (Completely Waterproof) Specifications E52-P5AY-40 Element type Pt100 Class Class B Protective tubing material Fluororesin (FEP) tube (element / fluororesin mold (FEP)) Conductor type 3-conductor system Temperature range -50C to 180C Lead wire Fluororesin (FEP) cover (with outer cover): -50C to 180C Y-type crimp terminal for M3.5 Dimensions Marker tube Element FEP mold Fused (completely waterproof) 6 dia. PFA-covered wire 0.18/7 Product label 3.5 dia. A B B 65 305 Red (A) White (B) White (B) 80 9010 M Model Lead wire length (m) E52-P5AY-40 2M 2 E52-P5AY-40 4M 4 E52-P5AY-40 6M 6 E52-P5AY-40 8M 8 23 E52 Pressure-resistant Explosion-proof (IICT6) Models Thermocouples Enclosed-terminal Models E52-CA@@C-N-6 L Dimensions 131.5 L2 L1 Socket (SUS304) 10 15 dia. 6.4 dia. 113 Sheath (ASTM316L) SUS304 O-ring Specifications Element type K (CA) Class Class 2 (0.75) Class 3 (Level 1.5) at -40C and under Protective tubing material 113 64.6 L2 section: ASTM316L L1 section: SUS304 70 Explosion- Construction Pressure-resistant proof explosion-proof structure specifica- Explosion-protected IICT6 tions class and ignitability G1/2 Explosion-proof temperature range -20C to 85C Lead wire wiring method Pressure-resistant packing cable ground type E52-CA20C-N-6 D=6.4 L2=150 20 D = 6.4 150 Conduit thread G1/2 E52-CA35C-N-6 D=6.4 L2=300 35 D = 6.4 300 Installation method Conforms to Technical Recommendations of the Research Institute of Industrial Safety (Japan) E52-CA50C-N-6 D=6.4 L2=450 50 D = 6.4 450 E52-CA75C-N-6 D=6.4 L2=700 75 D = 6.4 700 Model Protective tubing length L (cm) Protective tubing diameter L2 (mm) Platinum Resistance Thermometers for Surface Temperature Measurement Enclosed-terminal Models E52-P@@C-N-6 L Dimensions 131.5 L1 L2 10 Socket (SUS304) 15 dia. 6.4 dia. 113 Specifications Sheath (ASTM316L) SUS304 Element type Pt100 Class Class B Protective tubing material L2 section: ASTM316L L1 section: SUS304 O-ring Explosion- Construction Pressure-resistant proof explosion-proof structure specifica- Explosion-protected IICT6 tions class and ignitability 64.6 G1/2 70 Explosion-proof temperature range -20C to 85C Lead wire wiring method Pressure-resistant packing cable ground type Conduit thread G1/2 E52-P20C-N-6 D=6.4 L2=150 20 D = 6.4 150 Installation method Conforms to Technical Recommendations of the Research Institute of Industrial Safety (Japan) E52-P35C-N-6 D=6.4 L2=300 35 D = 6.4 300 E52-P50C-N-6 D=6.4 L2=450 50 D = 6.4 450 E52-P75C-N-6 D=6.4 L2=700 75 D = 6.4 700 Model Protective tubing length L (cm) Protective tubing diameter L2 (mm) 24 E52 Double-element Models Thermocouple Exposed-lead Models Specifications E52-CA20AY-7 Element type K (CA) Dimensions Class Class 2 (0.75) Y-type crimp terminal for M3.5 Protective tubing ASTM316L material (with sheath) Thermal contact Non-grounded type Temperature range 0C to permissible temperature limit Lead wire Vinyl-covered: -20C to 70C Product label Marker tube Red (+) Compensating conductor Sleeve Sheath (ASTM316L) + - White (-) d D Red (+) + - White (-) 80 9010 30 2,000 55 200 Permissible Temperature in Dry Air D Element wire K (CA) ASTM316L 3.2 dia. 750C 4.8 dia. 800C 6.4 dia. 800C 8.0 dia. 900C Model Protective tubing diameter Sleeve diameter (mm) Permissible Lead wire Temperature length (m) (C) E52-CA20AY-7 D=3.2 2M D = 3.2 d = 11 750 2 E52-CA20AY-7 D=4.8 2M D = 4.8 d = 11 800 2 E52-CA20AY-7 D=6.4 2M D = 6.4 d = 11 800 2 E52-CA20AY-7 D=8.0 2M D = 8.0 d = 11 900 2 Platinum Resistance Thermometers Exposed-lead Models Specifications E52-P20AY-7 Element type Pt100 Dimensions Class Class B Y-type crimp terminal for M3.5 Protective tubing ASTM316L material (with sheath) Red (A) Conductor type 3-conductor system White (B) Temperature range -200C to 450C White (B) Lead wire Vinyl-covered: -20C to 70C Red (A) White (B) Wire marks (1, 2) Marker tube Indicated by pair Lead wire with all-vinyl coating Product label A B B 11 dia. 6.5 dia. 1 A B B Sleeve (SUS304) Sheath (ASTM316L) Caulking D 2 Filled with epoxy resin White (B) Silicon shrinkable tube 80 9010 Model 30 55 M Protective tubing diameter 2006 Lead wire length (m) E52-P20AY-7 D=4.8 2M D = 4.8 2 E52-P20AY-7 D=6.4 2M D = 6.4 2 25 E52 Enclosed-terminal Models Specifications E52-P20C-N-7 Element type Pt100 Class Class B Protective tubing material ASTM316L (with sheath) Conductor type 3-conductor system Temperature range -200C to 450C Dimensions 96 Terminal for terminal connection Size: M4 Terminal box 82 dia. Sheath (ASTM316L) Socket (SUS304) D 86 Caulking 15 (See note) L-50 53 Model Protective tubing Protective length L (cm) tubing diameter E52-P20C-N-7 D=4.8 20 D = 4.8 E52-P20C-N-7 D=6.4 20 D = 6.4 Note: The length L is in centimeters, but "50" is 50 millimeters. Therefore, for the E52-P20C-N-7: L = 20 (cm), the sheath length L - 50 = 200 - 50 = 150 mm. Silicone-covered Lead Wires Models Thermocouples Exposed-lead Models with Screws Specifications E52-CA1DY-40 Element type K (CA) Class Class 2 (0.75) Screw material SUS304 Thermal contact Grounded type Temperature range 0C to 300C Lead wire Silicone-covered (0.1/30): 0C to 150C Terminal shape Y-type crimp terminal for M3.5 Dimensions 1 2.8 10 4.2 M 13 80 Silicone covering 80 Red (+) 11 White (-) 8 dia. Caulking SUS304 Silicone spring with Thermocovering Y-type crimp 6.5 outer dia. couple terminal for 3.5 SUS304 screw and 5.2 element Silicone inside dia. wire shrinkable tubing 3.8 dia. Movable ring Note: Refer to the installation example for the E52-CA1DY. Model Screw pitch Lead wire length (m) E52-CA1DY-40 M6 1M M6 1 E52-CA1DY-40 M6 2M M6 2 E52-CA1DY-40 M6 4M M6 4 Thermocouples with Crimp Terminals Specifications E52-CA1GTY-14 Element type K (CA) Class Class 2 (0.75) Thermal contact Grounded type Temperature range 0C to 200C Lead wire Silicone-covered : 0C to 150C Terminal shape Y-type crimp terminal for M3.5 Dimensions Silicone-covered M4, round, compensating cable with crimp terminal twenty 0.18-dia. conductors and external 8 dimensions of 5.5 dia. Color tubing Blue CA (K) Red (+) White (-) 4.3 dia. 15 30 80 M Y-type crimp terminal for M3.5 Lead wire length (M): 1 or 2 m Model Lead wire length (m) E52-CA1GTY-14 1M 1 E52-CA1GTY-14 2M 2 26 E52 Thermistors Element Interchangeable Thermistor for E5CS and E5C2 Temperature Ranges Temperature range Color code Nominal resistance Thermistor constant -50C to 50C Blue 6 k (0C) 3390K 0C to 100C Black 6 k (0C) 3390K 50C to 150C Red 30 k (0C) 3450K 100C to 200C Yellow 0.55 k (200C) 4300K 150C to 300C Green 4 k (200C) 5133K Lead wire A pair of 0.12 dia. 7 Fluororesin-insulated stranded wires with 0.86 outer dia. each Flat glass-wool-shielded lead cable with 0.12 dia. 10 conductors and external dimensions of 2.5 x 1.55 Specifications Item Coupling method E52-THE@@ Element interchangeable thermistor Class JIS class 1 Protective tubing material SUS304 Time constant 8 to 15 s in still water Dissipation factor 2.4 to 2.8 mW/C in still air Lead wire heat resistive temperature 180C Error Detectable temperature Error -50C to 100C 1C max. 100C to 350C 1% max. of detectable temperature Permissible Temperature Detectable temperature Operating temperature -50C to 50C 100C 0C to 100C 150C 50C to 150C 200C 100C to 200C 250C 150C to 300C 350C Note: Models with non-standard lead wire length and protective tubing length are available on request. This Thermistor is a dedicated Thermistor for the E5C2 and E5CS. 27 E52 Exposed-lead Models E52-THE5A Dimensions SUS304 t0.25 Temperature range Lead wires (See note.) Caulking Color code 4 dia. 15 50 50 10 1,030 Model -50C to 50C E52-THE5A -50-50C 1M 0C to 100C E52-THE5A 0-100C 1M 50C to 150C E52-THE5A 50-150C 1M 100C to 200C E52-THE5A 100-200C 1M 150C to 300C E52-THE5A 150-300C 1M Note: The lead wires have no polarity Exposed-lead Models with Screws E52-THE6D Temperature range Dimensions Tapered pipe thread SUS304 Lead wires R1/8 (See note.) SUS304 t0.25 Color code 4 dia. Argon arc welding 15 10 6 14 65 15 Model -50C to 50C E52-THE6D -50-50C 1M 0C to 100C E52-THE6D 0-100C 1M 50C to 150C E52-THE6D 50-150C 1M 100C to 200C E52-THE6D 100-200C 1M 150C to 300C E52-THE6D 150-300C 1M 50 10 1,000 Note: The lead wires have no polarity Exposed-lead Models with Flange E52-THE6F Temperature range Dimensions Three, 3.5 dia. 120 120 SUS304 SUS304 t0.25 Silver soldering Lead wires (See note.) Color code 4 dia. 15 1 20 dia. 30 dia. 65 15 Model -50C to 50C E52-THE6F -50-50C 1M 0C to 100C E52-THE6F 0-100C 1M 50C to 150C E52-THE6F 50-150C 1M 100C to 200C E52-THE6F 100-200C 1M 150C to 300C E52-THE6F 150-300C 1M 50 10 1,000 Note: The lead wires have no polarity Note: 1. The Thermistor lead cable can be extended with a standard lead wire for extension. If waterproof performance is required, be sure that the lead cable joint is of waterproof construction as well. 2. Be sure to specify the model and temperature range when ordering the Thermistor. The Thermistor has a color code according to the temperature range. 28 E52 Accessories Compression Fittings Model Information Model Screw of part Applicable a protective tubing diameter PT 1/8 D=1.0 R 1/8 Dimension b 1.0 dia. PT 1/8 D=1.6 1.6 dia. PT 1/8 D=3.2 3.2 dia. PT 1/8 D=4.8 c d Flat diameter Part c Part b 5 13 10 14 14 5 15 12 17 14 4.8 dia. PT 1/4 D=3.2 R 1/4 3.2 dia. PT 1/4 D=4.8 4.8 dia. PT 1/4 D=6.4 6.4 dia. PT 3/8 D=8 R 3/8 8 dia. 5 19 15 21 17 PT 1/2 D=10 R 1/2 10 dia. 8 23.5 19.5 26 21 M 12 D=4.8 M 12 4.8 dia. 5 15 12 17 14 Note: The Compression Fitting is not of airtight construction. Do not use the Compression Fitting for applications in which the exposure of the sensing object will cause problems. The compression fitting is a screw that adjusts and secures the insertion length of Temperature Sensors with the above protective tubing diameters. The material of the Compression Fitting is SUS304 with internal fixing beads made of brass. a Protective tubing dia. D Sensor side Head side d c b Tighten using the retaining screw to secure to the protective tubing. Material Main body SUS304 Lock bead Brass Retaining screw SUS304 Source: JIS B 0203 (Unit: mm) NomiT.P.I. Outer nal (No. of diamethread threads ter: d size /inch) Effective diameter: d2 Root diameter: d1 Standard diameter position a (from pipe end) Minimum effective screw length: f PT 1/8 28 9.728 9.147 8.566 3.97 0.91 2.5 PT 1/4 19 13.157 12.301 11.445 6.01 1.34 3.7 PT 3/8 19 16.662 15.806 14.950 6.35 1.34 3.7 PT 1/2 14 20.955 19.793 18.631 8.16 1.81 5.0 a f Tapered thread d d2 d1 Standard dia. 29 E52 Loose Flanges Model Information Applicable protective tubing diameter MF-1 Model 3.2 dia. MF-1 D=3.2 4.8 dia. MF-1 D=4.8 6.4 dia. MF-1 D=6.4 8 dia. MF-1 D=8 10 dia. MF-2 D=10 12 dia. MF-2 D=12 15 dia. MF-2 D=15 22 dia. MF-2 D=22 Note: 1. Use the Loose Flange in atmospheric pressure. The Loose Flange is not of airtight construction. 2. Use the Loose Flange at 400C maximum. 3. Do not apply the Loose Flange to protective tubing diameters other than the applicable ones. MF-2 120 120 Three, 5 dia. Three, 6.5 dia. 36 54 dia. 21 dia. D dia. M4 31 dia. D dia. 5 14 24 23 dia. 45 dia. M6 6.6 35 dia. 70 dia. Material: Aluminum 30 E52 Compensating Conductors The material of the Compensating Conductor is the same as or similar to that of the Thermocouple. Therefore, the Thermocouple can be connected to the Compensating Conductor just as if the length of the Thermocouple is to be extended. A standard model for a temperature range between -20C and 70C and two types of heat-resistive models for a temperature range between 0C and 150C are available. Be sure to use the compensating conductor for the extension of the length of the thermocouple. Model Information Thermocouple R Heat resistance Exterior Model (Length) 1m 2m 4m 8m Standard Fully vinyl-covered (waterproof) WPRG-N 1M WPRG-N 2M WPRG-N 4M WPRG-N 8M Heat resistive Fully glass-wool-covered WPRH-N 1M WPRH-N 2M WPRH-N 4M WPRH-N 8M Fully glass-wool-covered with external shield WPRH6-N 1M WPRH6-N 2M WPRH6-N 4M WPRH6-N 8M of stainless steel K (CA) Standard Fully vinyl-covered (waterproof) WCAG-N 1M WCAG-N 2M WCAG-N 4M WCAG-N 8M Heat resistive Fully glass-wool-covered WCAH-N 1M WCAH-N 2M WCAH-N 4M WCAH-N 8M Fully glass-wool-covered with external shield WCAH6-N 1M WCAH6-N 2M WCAH6-N 4M WCAH6-N 8M of stainless steel J (IC) Silicone-covered (See note 2.) WCAG-40 1M WCAG-40 2M WCAG-40 4M WCAG-40 8M Standard Vinyl covered (waterproof) WICG-N 1M WICG-N 2M WICG-N 4M WICG-N 8M Heat resistive Fully glass-wool-covered WICH-N 1M WICH-N 2M WICH-N 4M WICH-N 8M Fully glass-wool-covered with external shield WICH6-N 1M WICH6-N 2M WICH6-N 4M WICH6-N 8M of stainless steel Note: 1. Compensating Conductors with lengths, increased in units of a meter, up to 100 meters are available on request. Specify lengths above 100 meters in units of 100 meters. The maximum length depends on the product. Contact your OMRON representative for details. 2. It has the same waterproof characteristics as the standard model (fully vinyl-covered) and can be used at high temperatures. Specifications (JIS C1610-1995) Model WPRG-N Type of thermocouple R WPRH-N Use Code (See note.) K (CA) RCA-2-G Fully vinyl-covered (waterproof) 7/0.3 0 to 90 30 RCB-2-H Fully glass-wool-covered 0 to 150 60 100 7/0.32 Exterior color Black Standard KCC-2-G Fully vinyl-covered (waterproof) 7/0.3 0 to 90 Heat resistive KCB-2-H Fully glass-wool-covered 7/0.32 0 to 150 30/0.1 -20 to 150 100 140 Blue Fully glass-wool-covered with external shield of stainless steel WCAG-40 WICH6-N Error (C) Heat resistive WCAH6-N WICG-N Operating temperature range (C) Fully glass-wool-covered with external shield of stainless steel WCAH-N WICH-N Number of wires/wire diameter Standard WPRH6-N WCAG-N Exterior J (IC) Heat resistive KX-2-G for moving parts Silicone-covered Standard JX-2-G Fully vinyl-covered (waterproof) 7/0.3 -20 to 90 Heat resistive JX-2-H Fully glass-wool-covered 0 to 150 7/0.32 Yellow Fully glass-wool-covered with external shield of stainless steel Note: Symbols conform to JIS standards. For code having duplicate exterior, check the application and check in our models. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. 31 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron's sole obligation hereunder shall be, at Omron's election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron's analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user's programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron's Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron's representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2014.10 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2014 All Right Reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: E52-CA15AY D=1.6 2M