Features 4:1 Wide Input Voltage Range 30 Watts Output Power 1.6kVDC Isolation UL Certified Fixed Operating Frequency Six-Sided Continuous Shield Standard 50.8 x40.6x10.2mm Package Efficiency to 88 % Available as Power Module (RPM30-EW) POWERLINE DC/DC-Converter 30 Watt Single & Dual Output Description The RP30-EW series wide input range DC/DC converters are certified to UL 60950-1 and to cUL 60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The industry standard 2" x 1.6" package meets military standards for thermal shock and vibration tolerance. Selection Guide 24V and 48V Input Types Part Number Input Range VDC Output Voltage VDC Output Current mA Input(4) Current mA Efficiency(5) Capacitive(6) Load max. % RP30-243.3SEW 10-40 3.3 6000 994 87 19500F RP30-2405SEW 10-40 5 6000 1506 87 10200F RP30-2412SEW 10-40 12 2500 1506 87 3300F RP30-2415SEW 10-40 15 2000 1488 88 1100F RP30-483.3SEW 18-75 3.3 6000 497 87 19500F RP30-4805SEW 18-75 5 6000 744 88 10200F RP30-4812SEW 18-75 12 2500 753 87 3300F RP30-4815SEW 18-75 15 2000 744 88 1100F RP30-2412DEW 10-40 12 1250 1563 84 1000F RP30-2415DEW 10-40 15 1000 1543 86 680F RP30-4812DEW 18-75 12 1250 772 85 1000F RP30-4815DEW 18-75 15 1000 762 86 680F UL-60950-1 Certified E196683 RP30-EW * no suffix for CTRL function with Positive Logic (1=ON, 0=OFF), this is standard * add /N for CTRL function with Negative Logic (0=ON, 1=OFF) * add suffix -HC for premounted heatsink and clips Ordering Examples RP30-2405SEW = 24V Input, 5V Output, Positive Logic CTRL pin. RP20-4812DEW/N-HC = 48V Input, 12V Output, Negative Logic CTRL pin, Heatsink fitted Please Read Application Notes Derating Graph (Ambient Temperature) RP30-2412SEW 125 125 100 100 50 75 Natural Convection Output Power (%) 75 Output Power (%) RP30-2412SEW With Heat Sink 25 0 -40 -25 -10 0 50 60 70 Ambient Temperature Range (C) 80 90 100 50 Natural Convection 25 0 -40 -25 -10 0 50 60 70 Ambient Temperature Range (C) 55C 80 90 100 64C Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical support service at info@recom-development.at www.recom-international.com REV:0/2009 P-57 RP30-S_DEW Series POWERLINE DC/DC-Converter Typical Characteristics RP30-483.3SEW Efficiency VS Output Load Efficiency (%) 87 86 85 84 83 82 81 80 75 70 65 1 2 3 4 5 6 Output Load (A) RP30-483.3SEW RP30-EW Efficiency (%) Efficiency VS Input Voltage 88 87 86 85 84 83 82 81 80 79 78 10 15 20 25 30 35 40 Specifications (typical at nominal input and 25C unless otherwise noted) Input Voltage Range Under Voltage Lockout 24V nominal input 48V nominal input 24V input DC-DC ON DC-DC OFF 48V input DC-DC ON DC-DC OFF Input Filter (see Note 1) L-C Type Input Voltage Variation dv/dt (Complies with ETS300 132 part 4.4) Input Surge Voltage (100 ms max.) 24V Input 48V Input Input Reflected Ripple (nominal Vin and full load) (see Note 3) Start Up Time (nominal Vin and constant resistor load) Remote ON/OFF (see Note 7) Remote OFF input current 10-40VDC 18-75VDC 10VDC 8VDC 18VDC 16VDC 5V/ms max 50VDC 100VDC 20mAp-p DC-DC ON DC-DC OFF Nominal input Output Power 10ms typ. Open or 3.0V < Vr < 12V Short or 0V < Vr < 1.2V 3mA 30W max. continued on next page P-58 REV: 0/2009 www.recom-electronic.com RP30-S_DEW Series POWERLINE DC/DC-Converter Specifications (typical at nominal input and 25C unless otherwise noted) Output Voltage Accuracy (full Load and nominal Vin) 1% Voltage Adjustability Minimum Load 10% Single Dual Line Regulation (low line, high line at full load) Load Regulation (25% to 100% full load) (see Note 9) Cross Regulation (Asymmetrical 25% <> 100% load) Ripple and Noise (20MHz bandwith) (Measured with a 100nF/50V MLCC) Single Dual Dual Single 3.3V Single 5V Single 12, 15V Dual 12, 15V Temperature Coefficient 0.5% 0.5% 1% 5% 60mVp-p 75mVp-p 100mVp-p 100mVp-p 0.02%/C max. Transient Response (25% load step change) Over Voltage Protection Zener diode clamp 0% 10% of full load 250s 3.3V 5V 12V 15V Over Load Protection (% of full load at nominal Vin) 3.9V 6.2V 15V 18V 150% max. Undervoltage Lockout See Application Notes Short Circuit Protection Hiccup, automatic recovery Efficiency see Selection Guide" table 1600VDC min. Isolation Resistance 1 G min. Isolation Capacitance 1000pF max. Operating Frequency 300kHz typ. Approved to Safety Standards EN60950 Operating Temperature Range -40C to +85C(with derating) Maximum Case Temperature +100C Storage Temperature Range -55C to +125C Over Temperature Protection Thermal Impedance (see Note 8) Natural convection Natural convection with Heat Sink Thermal Shock 115C typ. 10C/Watt 8.24C/Watt MIL-STD-810F Vibration 10-55Hz, 10G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Nickel plated copper Base Material Non-conductive black plastic Potting Material Epoxy (UL94-V0) Weight 48g Dimensions 50.8 x 40.6 x 10.2mm continued on next page www.recom-international.com REV:0/2009 P-59 RP30-EW Isolation Voltage RP30-S_DEW Series POWERLINE DC/DC-Converter Specifications (typical at nominal input and 25C unless otherwise noted) Conducted Emissions (see Note 10) Radiated Emissions ESD Radiated Immunity Fast Transient Surge Conducted Immunity EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Class A Class A Perf. Criteria B Perf. Criteria A Perf. Criteria B Perf. Criteria B Perf. Criteria A 1315 x 103 hours MTBF (see Note 2) Notes : 1. An external filter capacitor is required for normal operation. The capacitor should be capable of handing 1A ripple current for 48V/24V models. RECOM suggest: Nippon chemi-con KY series, 220F/100V, ESR 90m . 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40C (Ground fixed and controlled environment). 3. Simulated source impedance of 12H. 12H inductor in series with +Vin. 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input. Positive logic ON/OFF is standard, no suffix (Ex. RP30-2405SEW) Negative logic ON/OFF is marked with suffix-N (Ex. RP30-2405SEW/N). 8. Heat sink is optional and P/N: 7G-0011C. Powerline DC/DC Converters can be ordered with pre-mounted heatsinks including antivibration fixing clips (add suffix -HC). See Application Notes for heatsink details. 9. The dual output required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 10.See application notes for class B common mode filter suggestion. RP30-EW Package Style and Pinning (mm) 3rd angle projection 50.80 40.60 10.20 5.6 dia. 1.0 Pin Connections Pin # 1 2 4^ 5 6 7 8 45.70 Bottom View 5.10 15.20 1 10.20 12.70 6 External Output Trimming Output can be externally trimmed by using the method shown below. ( ) for dual output trim. See Application Notes for details. 2 7 4 10.20 17.80 7(7) 8 Trim Up Trim Down 8(8) RD RU 8(8) P-60 Dual +Vin -Vin CTRL +Vout Com -Vout Trim Pin Pitch Tolerance 0.35 mm 5 17.80 Single +Vin -Vin CTRL No Pin +Vout -Vout Trim REV: 0/2009 6(5) www.recom-electronic.com