Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
495
MP Series
Modular Photoelectric
Sensors
• Harsh Duty
• Modular design
- Exchangeable rotatable heads
- Limit switch and mini style
plug-in bases
- Screw terminal, preleaded, and
connector version receptacles
• Withstands 1200 psi washdown,
IP69K
• 6 Amp SPDT and 5 Amp DPDT
relay models
• Multifunction timer/logic cards
available
• DC, AC, AC/DC models
Diffused
Mode
Sensing Ranges: 0.3m, 0.45m, 0.76m. 0.9m,
1.3m, 1.8m, 3m
Outputs: Dependent on base selected
Retro-Reflective
Mode
Features:
• Polarization filter to detect shiny objects
Sensing Ranges: 1.8m, 4.5m, 6m, 9m
Outputs: Dependent on base selected
Fiber Optic
Mode
Sensing Ranges: Dependent on fibers selected
Outputs: Dependent on base selected
Convergent Beam
Mode
Features:
• Adjustable focal range
• Background and foreground suppression
Sensing Range: 38mm, 100mm
Outputs: Dependent on base selected
Thru-Beam
Mode
Sensing Range: 30m, 36m, 60m
Outputs: Dependent on base selected
MP Series modular sensors enable users to
customize a sensing solution for almost any
application. For this reason, the components
of this series are sold separately. Refer to
pages 496-497 for instruction on how to
assemble an MP Series sensor.
See page 513-524 for MP Series
sensing charateristics, wiring,
dimensions and accessories.
Photoelectric MP Series Modular
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
496
STANDARD HEADS (pages 498-500) Models
Convergent Beam: 38mm focal point, 1ms response, plastic lens, infrared MPC26HD
Convergent Beam: 100mm focal point, 1ms response, plastic lens, infrared MPC6HD
Diffuse: 0.45m range, 1ms response, plastic lens, infrared MPD6HD
Diffuse: 3m range, 10ms response, glass lens, infrared MPD1HD
Diffuse: 3m range, 10ms response, plastic lens, infrared MPD2HD
Diffuse: 0.9m range, 10ms response, plastic lens, infrared MPD4HD
Diffuse: 1.3m range, 10ms response, plastic lens, infrared MPD8HD
Polarized Retro-Reflective: 4.5m range, 1ms response, glass lens, visible red MPP6HD
Polarized Retro-Reflective: 6m range, 10ms response, glass lens, visible red MPP1HD
Retro-Reflective: 9m range, 1ms response, glass lens, infrared MPL16HD
Retro-Reflective: 9m range, 1ms response, plastic lens, infrared MPL6HD
Retro-Reflective: 9m range, 10ms response, glass lens, infrared MPL1HD
Retro-Reflective: 9m range, 10ms response, plastic lens, infrared MPL2HD
Retro-Reflective: 1.8m range, 1ms response, plastic lens, infrared MPK2HD
Thru-Beam: 30m range, transmitter, plastic lens, infrared MPE8HD
Thru-Beam: 30m range, receiver, 10ms response, plastic lens, infrared MPR8HD
Thru-Beam: 60m range, transmitter, glass lens, infrared MPE1HD
Thru-Beam: 60m range, transmitter, plastic lens, infrared MPE2HD
Thru-Beam: 60m range, receiver, 1ms response, glass lens, infrared MPR16HD
Thru-Beam: 60m range, receiver, 1ms response, plastic lens, infrared MPR6HD
Thru-Beam: 60m range, receiver, 10ms response, glass lens, infrared MPR1HD
MPF Fiber Optic: 1ms response, infrared MPF6HD
MPF Fiber Optic: 10ms response, infrared MPF1HD
MPF Fiber Optic: 5ms response, visible red MPF2HD
MPG Fiber Optic: 1ms response, infrared MPG6HD
MPG Fiber Optic: 5ms response, visible red MPG2HD
Inductive Sensor Head: side sensing, 13mm range
(page 203)
NBB13SIDE
Inductive Sensor Head: top sensing, 13mm range
(page 203)
NBB13TOP
ANALOG HEADS (page 500) Models
Diffuse: 50mm to 500mm range, plastic lens, infrared MPD5HD
MPF Fiber Optic: infrared MPF5HD
2-WIRE AC HEADS (pages 501-502) Models
Convergent Beam: 38mm range, plastic lens, infrared MP2C2HD
Convergent Beam: 100mm range, plastic lens, infrared MP2C4HD
Diffuse: 300mm range, plastic lens, infrared MP2D7HD
Diffuse: 760mm range, plastic lens, infrared MP2D4HD
Diffuse: 1.8m range, glass lens, infrared MP2D1HD
Diffuse: 1.8m range, plastic lens, infrared MP2D2HD
Polarized Retroreflective: 4.5m range, glass lens, visible red MP2P1HD
Retroreflective: 9m range, glass lens, infrared MP2L1HD
Retroreflective: 9m range, plastic lens, infrared MP2L2HD
Thru-Beam: 36m range, transmitter, glass lens, infrared MPE3HD
Thru-Beam: 36m range, transmitter, plastic lens, infrared MPE4HD
Thru-Beam: 36m range, receiver, plastic lens, infrared MP2R2HD
MPF Fiber Optic: infrared MP2F1HD
MPF Fiber Optic: visible red MP2F2HD
MP Sensor Head
MP Sensor Receptacle
Plug-in/DPDT Relay Base
SPDT Relay Base
Mini Style Base
1. SELECT
A HEAD
BUILD AN
MP SENSOR
NO RECEPTACLE NEEDED
RELAY
Photoelectric MP Series Modular
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
497
PLUG-IN BASES (pages 504-505) Models
10.8-140VDC/18-140VAC 4-wire FET w/output indicator MPS18HD
10-30VDC emitter base only, 3-wire DC MPS30HD
10-30VDC NPN and PNP, 4-wire DC MPS33HD
10-30VDC NPN N.O./N.C., 3-wire DC MPS31HD
10-30VDC PNP, 3-wire DC MPS32HD
198-264VAC 4-wire solid state AC relay 1A max. MPS12HD
198-264VAC emitter base only MPS13HD
92-132VAC 4-wire bilateral FET (AC/DC) 100mA max. MPS17HD
92-132VAC 4-wire solid state AC relay 1A max. MPS11HD
92-132VAC emitter base only MPS10HD
AC/DC
DC
AC
RECEPTACLE Models
Standard 4-terminal, ■MPB20
1/2" NPT conduit thread
Standard 4-terminal, pg13.5 ■MPB30
conduit thread
1.8m, 5-conductor cable ▲MPB21
3.6m, 5-conductor cable ▲MPB25
3.6m, 5-conductor preleaded ▲MPB26
Super-trex cable
5-pin mini connector ●MPB22
4-pin micro connector ❍MPB27
DPDT RECEPTACLE Models
MINI STYLE BASES (pages 507-509) Models
22-26VAC/VDC, 4-wire bilateral FET, 100mA max., 2m preleaded cable ▲MPT16HD
10.8-140VDC/18-140VAC, 4-wire FET w/output ind., 2m preleaded cable ▲MPT18HD
10-30VDC, 2m preleaded cable, emitter base only ▲MPT30HD
10-30VDC, NPN N.O., 2m preleaded cable ▲MPT31HD
10-30VDC, PNP N.O., 2m preleaded cable ▲MPT32HD
10-30VDC, NPN and PNP, N.O., 2m preleaded cable ▲MPT33HD
22-26VAC, 2m preleaded cable, emitter base only ▲MPT14HD
92-132VAC, 2m preleaded cable, emitter base only ▲MPT10HD
92-132VAC, 4-wire bilateral FET (AC/DC), 100mA max., 2m preleaded cable ▲MPT17HD
92-132VAC, 4-wire solid state AC relay, 0.5A max., 2m preleaded cable ▲MPT11HD
10-30VDC, NPN N.O., 4-pin micro connector ❍
MPT41HD-CM
10-30VDC, PNP N.O., 4-pin micro connector ❍
MPT42HD-CM
10-30VDC, 4-pin micro connector, emitter base only ❍
MPT40HD-CM
10-30VDC, NPN and PNP, 4-pin mini connector ●MPT43HD
10-30VDC, NPN N.O., 4-pin mini connector ●MPT41HD
10-30VDC, PNP N.O., 4-pin mini connector ●MPT42HD
10-30VDC, 4-pin mini connector, emitter base only ●MPT40HD
92-132VAC, 3-pin mini connector, emitter base only ●MPT20HD
92-132VAC, 4-wire solid state AC relay, 0.5A max., 5-pin mini connector ●MPT21HD
92-132VAC, 4-wire bilateral FET (AC/DC), 100mA max., 5-pin mini connector ●MPT27HD
92-132VAC, 6A, SPDT relay, 2m preleaded cable ▲MPW11HD
92-132VAC, 6A, SPDT relay, 5-pin mini connector ●MPW21HD
AC/DC
3-WIRE
DC
4-WIRE
AC
MINI
CONNEC.
DC
MICRO
CONNEC.
DC
MINI
RELAY AC
MINI
CONNEC.
AC
SPDT RELAY BASES (page 506) Models
SPDT, 10-30VDC, 6A ■MPV31HD
SPDT, 103-132VAC, 6A ■MPV11HD
SPDT, 192-264VAC, 6A ■MPV12HD
SPDT, 20-260VAC/VDC, 6A ■MPV14HD
SPDT, 22-26VAC, 6A ■MPV13HD
AC DPDT RELAY BASE (page 505) Model
DPDT, 92-132VAC, 5A, output indicator MPSD11HD
ANALOG
ANALOG PLUG-IN BASE (page 510) Model
12-24 VDC analog output (0-5 VDC or 4-20mA) MPS35HD
DC
SPDT
RELAY
AC
2-WIRE PLUG-IN BASES (page 511) Models
10-30 VDC emitter base only MPS30HD
92-132 VAC emitter base only MPS10HD
198-264 VAC emitter base only MPS13HD
22-26 VAC/VDC emitter base only MPS14HD
22-260 VAC plug-in base MP2S11HD
DC
2-WIRE
AC
8-terminal, 1/2" NPT conduit hole ■MPB23
8-terminal, 3/4" NPT conduit hole ■MPB24
RECEPTACLE Models
Standard 4-terminal, ■MPB20
1/2" NPT conduit thread
1.8m, 5-conductor cable ▲MPB21
5-pin mini connector ●MPB22
NO RECEPTACLE NEEDED
NO RECEPTACLE NEEDED
2-WIRE AC MINI STYLE BASES (page 512) Models
92-132 VAC mini base, 2m preleaded cable ▲MP2T11HD
92-132 VAC mini base, 3-pin connector ●MP2T21HD
■Terminal connectors
●Mini connectors
❍Micro connectors
▲Preleaded cable
2-WIRE
AC
ELECTRICAL
CONNECTION KEY
2. SELECT
A BASE 3. SELECT
A RECEPTACLE
Infrared
Infrared
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
498
Specifications
SENSING RANGE
SENSITIVITY ADJUSTMENT
MODEL NUMBER(S)
RESPONSE TIME*
HOUSING MATERIAL
LENS
ADDITIONAL DATA
38mm
Yes
MPC26HD
≤1ms
Polycarbonate
Plastic
100mm
Yes
MPC6HD
≤1ms
Polycarbonate
Plastic
Convergent Beam Mode
Specifications
SENSING RANGE
SENSITIVITY ADJUSTMENT
MODEL NUMBER(S)
RESPONSE TIME*
HOUSING MATERIAL
LENS
ADDITIONAL DATA
0.45m
Yes
MPD6HD
—
≤1ms
Polycarbonate
Plastic
0.9m
Yes
MPD4HD
—
≤10ms
Polycarbonate
Plastic
1.3m
Yes
MPD8HD
—
≤10ms
Polycarbonate
Plastic
See page 503
3m
Yes
MPD1HD
MPD2HD
≤10ms
Polycarbonate
Glass (1HD)
Plastic (2HD)
Diffused Mode
STANDARD HEADS
* NOTE: Total response time is the sum of the
sensor head and base response times.
* NOTE: Total response time is the sum of the
sensor head and base response times.
See page 503
Infrared
Infrared InfraredVisible Red
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
499
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
Retro-Reflective Mode
Specifications
SENSING RANGE
SENSITIVITY ADJUSTMENT
POLARIZED FILTER
MODEL NUMBER(S)
RESPONSE TIME*
HOUSING MATERIAL
LENS
ADDITIONAL DATA
1.8m
Yes
No
MPK2HD
—
—
—
≤1ms
Polycarbonate
Plastic
4.5m
Yes
Yes
MPP6HD
—
—
—
≤1ms
Polycarbonate
Glass
6m
Yes
Yes
MPP1HD
—
—
—
≤10ms
Polycarbonate
Glass
See page 503
9m
Yes
No
MPL16HD
MPL6HD
MPL1HD
MPL2HD
≤1ms (16HD/6HD)
≤10ms (1HD/2HD)
Polycarbonate
Glass (1HD/16HD)
Plastic (2HD/6HD)
Thru-Beam Mode
Specifications
SENSING RANGE
SENSITIVITY ADJUSTMENT
TRANSMITTER
RECEIVER
MODEL
TRANSMITTER
NUMBER(S) RECEIVER
RECEIVER
RESPONSE TIME*
HOUSING MATERIAL
LENS
ADDITIONAL DATA
30m
Yes
MPE8HD
MPR8HD
—
—
—
≤10ms
Polycarbonate
Plastic
60m
Yes
MPE1HD
MPR16HD
MPE2HD
MPR6HD
MPR1HD
≤1ms (16HD/6HD)
≤10ms (1HD)
Polycarbonate
Glass (1HD/16HD)
Plastic (2HD/6HD)
See page 503
STANDARD HEADS
* NOTE: Total response time is the sum of the
sensor head and base response times.
* NOTE: Total response time is the sum of the
sensor head and base response times.
Infrared
InfraredVisible Red
Infrared
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
500
Fiber Optic Mode
Specifications
SENSING RANGE
SENSITIVITY ADJUSTMENT
MODEL NUMBER(S)
RESPONSE TIME*
HOUSING MATERIAL
ADDITIONAL DATA
Determined by cable*
Yes
MPF2HD
MPG2HD
—
≤5ms
Polycarbonate
Determined by cable*
Yes
MPF6HD
MPG6HD
MPF1HD
≤1ms (6HD)
≤10ms (1HD)
Polycarbonate
See page 503
Specifications
SENSING RANGE
SENSITIVITY ADJUSTMENT
MODEL NUMBER(S)
RESPONSE TIME*
HOUSING MATERIAL
ADDITIONAL DATA
Determined by cable*
Yes
MPF5HD
≤10ms
Polycarbonate
See page 503
ANALOG HEADS
Specifications
SENSING RANGE
SENSITIVITY ADJUSTMENT
MODEL NUMBER(S)
RESPONSE TIME*
HOUSING MATERIAL
LENS
ADDITIONAL DATA
50-500mm
Yes
MPD5HD
≤10ms
Polycarbonate
Plastic
See page 503
Diffused Mode Fiber Optic Mode
STANDARD HEADS
*See pages 731-762 for
glass and plastic fiber optic
lengths and specifications.
*See pages 731-762 for
glass and plastic fiber optic
lengths and specifications.
* NOTE: Total response time is the sum of the
sensor head and base response times.
* NOTE: Total response time is the sum of the
sensor head and base response times.
* NOTE: Total response time is the sum of the
sensor head and base response times.
InfraredVisible Red
Infrared
Infrared
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
501
2-WIRE AC HEADS
Specifications
SENSING RANGE
SENSITIVITY ADJUSTMENT
MODEL NUMBER(S)
RESPONSE TIME*
HOUSING MATERIAL
LENS
ADDITIONAL DATA
38mm
Yes
MP2C2HD
≤10ms
Polycarbonate
Plastic
100mm
Yes
MP2C4HD
≤10ms
Polycarbonate
Plastic
Convergent Beam Mode
Specifications
SENSING RANGE
SENSITIVITY ADJUSTMENT
MODEL NUMBER(S)
RESPONSE TIME*
HOUSING MATERIAL
LENS
ADDITIONAL DATA
300mm
Yes
MP2D7HD
—
≤10ms
Polycarbonate
Plastic
760mm
Yes
MP2D4HD
—
≤15ms
Polycarbonate
Plastic
1.8m
Yes
MP2D1HD
MP2D2HD
≤15ms
Polycarbonate
Glass (1HD)/plastic (2HD)
See page 503
Diffused Mode
Retro-Reflective Mode
Specifications
SENSING RANGE
SENSITIVITY ADJUSTMENT
POLARIZED FILTER
MODEL NUMBER(S)
RESPONSE TIME*
HOUSING MATERIAL
LENS
ADDITIONAL DATA
4.5m
Yes
Yes
MP2P1HD
—
≤10ms
Polycarbonate
Glass
9m
Yes
No
MP2L1HD
MP2L2HD
≤10ms
Polycarbonate
Glass (1HD)
Plastic (2HD)
See page 503
* NOTE: Total response time is the sum of the
sensor head and base response times.
* NOTE: Total response time is the sum of the
sensor head and base response times.
* NOTE: Total response
time is the sum of the
sensor head and base
response times.
See page 503
Infrared
Infrared Visible Red
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
502
Fiber Optic Mode
Specifications
SENSING RANGE
SENSITIVITY ADJUSTMENT
MODEL NUMBER(S)
RESPONSE TIME*
HOUSING MATERIAL
LENS
ADDITIONAL DATA
Determined by cable*
Yes
MP2F1HD
≤1ms
Polycarbonate
Glass
Determined by cable*
Yes
MP2F2HD
≤1ms
Polycarbonate
Glass
See page 503
2-WIRE AC HEADS
Thru-Beam Mode
Specifications
SENSING RANGE
SENSITIVITY ADJUSTMENT
TRANSMITTER
MODEL
TRANSMITTER
NUMBER(S)
RECEIVER
RESPONSE TIME*
HOUSING MATERIAL
LENS
ADDITIONAL DATA
36m
Yes
MPE3HD
MPE4HD
MP2R2HD
≤10ms
Polycarbonate
Glass (3HD)
Plastic (4HD/2HD)
See page 503
*See pages 731-762 for
glass and plastic fiber optic
lengths and specifications.
* NOTE: Total response time is the sum of the
sensor head and base response times.
* NOTE: Total response time is the sum of the
sensor head and base response times.
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
503
LED(s)
OPERATING MODE
PROTECTION (IEC)
TEMPERATURE WORKING
RANGE STORAGE
HUMIDITY RANGE
VIBRATION
SHOCK
HEAD HOUSING
ACCESS COVER
SEALS
APPROVALS General
LISTED Purpose
General
CERTIFIED Purpose
Yes (2)
Light on/dark on
IP69K when all conponents
are properly assembled
-22ºF to +158ºF
-67ºF to +185ºF
95% RH (non-condensing)
10G,10-500 Hz
50G
Glass-filled polycarbonate
Glass-filled acetal, Type 20
Santoprene
Yes
Yes
MP Series Head Specifications
MP Series Head Specifications
Sensitivity
Adjustment
Alignment
Indicators
Light On/Dark On Mode Selector Switch
Every MP Series photoelectric sensor head has a light
on/dark on selector switch located on the PC board
inside the sensor head. The operating mode should be
set prior to assembling the head to its respective base.
Dark On - The output (load) is energized when the light
is blocked (retro and thru scan), or object absent
(diffuse scan); the photosensor is dark.
Light On - The output (load) is energized when the light
is not blocked (retro and thru scan), or object is
present (diffuse scan); the photosensor is illuminated.
Alignment Indicators
Two LED indicators are located on top of the sensor
head. Sufficient light level turns the green light ON.
When the light level decreases to 150% of the
minimum operating level, the red light turns ON.
Sensitivity Adjustment
Use a small blade screwdriver to open the cover on top of
the sensor head. This exposes the sensitivity adjustment
screw, labeled “S”.
The 15-turn sensitivity potentiometer will normally click at
both extremes of the sensitivity range.
- Turn the screw clockwise to increase the sensitivity.
- Turn the screw counterclockwise to decrease sensitivity.
- Snap the cover closed and fasten with a screw.
Fiber Optic Head Options
Fiber optic heads are furnished in two cable connection
styles, MPF and MPG, as designated by the first three
letters in their catalog listings.
MPF fiber optic sensor heads use dual slot glass cables
and are part of the original MP product line. The sensor
head has a dual slot end tip bezel connection on the
sensor head which maintains compatibility with
FE-MLS8C-FO sensors. With the MPZFOADPT adapter,
the MPF heads can accept plastic cables too.
MPG fiber optic sensor heads use universal style glass
cables. MPG heads accept the same universal style cables
used with our MHP miniature high performance sensors
and furnished by many manufacturers of photoelectric
products. They cannot be used with plastic cables.
Operating/Adjustment Of All Heads
Reference Guide
SENSING CHARACTERISTICS
WIRING DIAGRAMS
DIMENSIONS
ACCESSORIES
Pages 513-516
Pages 517-518
Page 519
Pages 520-524
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
504
PLUG-IN BASE
Specifications
MODEL NUMBER(S)
OUTPUT
LOAD CURRENT
LEAKAGE CURRENT
INRUSH CURRENT
VOLTAGE DROP
RESPONSE TIME*
SHORT CIRCUIT AND
OVERLOAD PROTECTION
REVERSE POLARITY
PROTECTION
SUPPLY VOLTAGE
CURRENT CONSUMPTION
ELECTRICAL CONNECTION
ADDITIONAL DATA
AC/DC
MPS18HD
—
—
—
—
Thyristor
100mA max.
≤10µA
250mA for 8ms,
(non-repetitive)
≤5VDC (DC operation)
≤2ms
No
No
10.8-140VDC
18-140VAC, 50/60Hz
≤50mA
Dependent on
receptacle selection
DC
MPS30HD†
MPS31HD
MPS32HD
MPS33HD
—
1 NPN (31HD)
1 PNP (32HD)
1 NPN and 1 PNP (33HD)
250mA max. (31HD/32D)
100mA max. (33HD)
≤10µA
—
≤1.0VDC (31HD/32HD)
≤0.8 VDC (33HD)
≤10µs
No (30HD/31HD/32HD)
Yes (33HD)
Yes
10-30VDC
≤25mA
Dependent on
receptacle selection
AC
MPS10HD†
MPS11HD
MPS12HD
MPS13HD†
MPS17HD
Solid state relay (11HD/12HD)
Thyrister (17HD)
5mA-1A (11HD/12HD)
100mA max. (17HD)
≤200µA (11HD)
≤240µA (12HD)
≤10µA (17HD)
30A for 8ms (11HD/12HD)
250mA for 8ms (17HD)
≤1.4VAC at rated load (11HD/12HD)
≤3V at 60mA (17HD)
≤10ms (11HD/12HD)
≤2ms (17HD)
No
No
92-132VAC, 50/60Hz (10HD/11H/17HD)
198-264VAC, 50/60Hz (12HD/13HD)
≤70mA
Dependent on
receptacle selection
See page 505
* NOTE: Total response time is the sum of the
sensor head and base response times.
†NOTE: Emitter base only.
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
505
PLUG-IN BASE DPDT RELAY BASE
TEMPERATURE WORKING
RANGE STORAGE
SHOCK
VIBRATION
HUMIDITY RANGE
HEAD/BASE SEAL
RECEPTACLE/BASE SEAL
ELECTROMAGNETIC
COMPATIBILITY COMPLIANCE
PROTECTION (IEC)
HOUSING MATERIAL
APPROVALS General
Purpose
LISTED
General
Purpose
CERTIFIED
-22ºF to +158ºF
-67ºF to +185ºF
50G
10G,10-500Hz
95% RH (non-condensing)
Santoprene
Buna-N
NEMA ICS5-2000
See page 6
IP69K when all components
are properly assembled
Glass-filled Polysulfone
Yes
Yes
Plug-in Base Specifications
MODEL(S)
MPB20
MPB21
MPB22
MPB25
MPB26
MPB27
MPB30
Standard 4-terminal, 1/2” NPT conduit thread
1.8m 5-conductor preleaded PVC cable
5-pin mini connector
3.7m 5-conductor preleaded PVC cable
3.7m 5-conductor preleaded Super-trex cable
4-pin micro connector
Standard 4-terminal, pg13.5 conduit thread
Specifications
MODEL NUMBER
SUPPLY VOLTAGE
OUTPUT
ELECTRICAL CONACT RATING
POWER CONSUMPTION
MECHANICAL LIFE OF RELAY
RESPONSE TIME*
ELECTROMAGNETIC
COMPATIBILITY COMPLIANCE
PROTECTION (IEC)
TEMPERATURE
OPERATING
STORAGE
SHOCK
VIBRATION
HUMIDITY
HOUSING MATERIAL
APPROVALS General
Purpose
LISTED
General
Purpose
CERTIFIED
ELECTRICAL CONNECTION
ADDITIONAL DATA
AC
MPSD11HD
92-132VAC, 50/60Hz
DPDT relay
250VAC/5A
≤6.6VA
5x107operations
≤10ms
NEMA ICS 5-2000
See page 6
IP69K when all components
are properly assembled
-22ºF to 158ºF
-67ºF to 185ºF
10G
6G, 10-55Hz @ double
amplitude of 1mm
95% RH (non-condensing)
Glass-filled Polysulfone
Yes
Yes
dependent on receptacle selection
See page 506
RECEPTACLE
MODEL(S)
MPB23
MPB24
8-terminal, 1/2” NPT conduit hole.
8-terminal, pg13.5 conduit thread.
DPDT PLUG-IN RECEPTACLE
See pages
767-812 for
cordsets
* NOTE: Total response time is the sum of the
sensor head and base response times.
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
506
SPDT RELAY BASE
Specifications
MODEL NUMBER(S)
OUTPUT
SUPPLY VOLTAGE
POWER CONSUMPTION
ELECTRICAL DC
CONTACT RATING AC
ELECTRICAL CONNECTION
DC
MPV31HD
—
—
—
SPDT relay
10-30VDC
≤10VA
28V/6A
300V/6A
5-terminal
1/2” conduit hole
AC
MPV11HD
MPV12HD
MPV13HD
MPV14HD
SPDT relay
103-132VAC, 50/60Hz (11HD)
192-264VAC, 50/60Hz (12HD)
22-26VAC, 50/60Hz (13HD)
20-260VAC/DC (14HD)
≤10VA (11HD)
≤18.5VA (12HD)
≤2VA (13HD)
≤4VA (14HD)
24V/6A
300V/6A
5-terminal
1/2” conduit hole
MECHANICAL LIFE OF RELAY
RESPONSE TIME*
TEMPERATURE WORKING
RANGE STORAGE
ELECTROMAGNETIC
COMPATIBILITY COMPLIANCE
PROTECTION (IEC)
SHOCK
VIBRATION
HUMIDITY RANGE
BASE
COVER/BASE SEAL
HEAD/BASE SEAL
COVER
APPROVALS General
LISTED Purpose
General
CERTIFIED Purpose
20 X 106operations
≤10ms
-22ºF to +158 ºF
-67ºF to +185ºF
NEMA ICS5-2000
See page 6
IP69K when all components
are properly assembled
10G
10G,10-100 Hz
95% RH (non-condensing)
Glass-filled polycarbonate
Buna-N
Santoprene
Die cast zinc
Yes
Yes
SPDT Relay Base Specifications
* NOTE: Total response time is the sum of the
sensor head and base response times.
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
507
MINI STYLE BASE
Specifications
MODEL NUMBER(S)
OUTPUT
LOAD CURRENT
LEAKAGE CURRENT
INRUSH CURRENT
VOLTAGE DROP
RESPONSE TIME*
SHORT CIRCUIT AND
OVERLOAD PROTECTION
REVERSE POLARITY
PROTECTION
SUPPLY VOLTAGE
CURRENT CONSUMPTION
ELECTRICAL CONNECTION
ADDITIONAL DATA
AC/DC
MPT16HD
MPT18HD
—
—
Thyristor
100mA max.
≤10µA
250mA for 8ms,
(non-repetitive)
≤3V (16HD, DC operation)
≤5V (18HD, DC operation)
≤2ms
No
No
10.8-140VDC
18-140VAC, 50/60Hz
≤70mA (16HD)
≤50mA (18HD)
2-meter cable,
PVC covered,
4-conductor, #18AWG
DC
MPT30HD†
MPT31HD
MPT32HD
MPT33HD
1 NPN (31HD)
1 PNP (32HD)
1 NPN and 1 PNP (33HD)
250mA max. (31HD/32D)
100mA max. (33HD)
≤10µA
—
≤1VDC (32HD/31HD)
≤0.6 VDC (33HD)
≤10µs
No (30HD/31HD/32HD)
Yes (33HD)
No
10-30VDC
≤25mA
2-meter cable,
PVC covered,
4-conductor, #18AWG
AC
MPT10HD†
MPT11HD
MPT14HD†
MPT17HD
Solid state relay (11HD)
Thyristor (17HD)
5mA-500mA (11HD)
100mA max. (17HD)
≤400µA (11HD)
≤10µA (17HD)
12A for 16ms (11HD)
250mA for 8ms (17HD)
≤1.2VAC at rated (11HD)
≤3V (17HD)
≤10ms (11HD)
≤2ms (17HD)
No
No
92-132VAC, 50/60Hz (10HD/11H/17HD)
198-264VAC, 50/60Hz (12HD/13HD)
≤70mA
2-meter cable,
PVC covered,
4-conductor, #18AWG
See page 509
* NOTE: Total response time is the sum of the
sensor head and base response times.
†NOTE: Emitter base only.
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
508
MINI STYLE BASE
Specifications
MODEL NUMBER(S)
OUTPUT
LOAD CURRENT
LEAKAGE CURRENT
INRUSH CURRENT
VOLTAGE DROP
RESPONSE TIME*
SHORT CIRCUIT AND
OVERLOAD PROTECTION
REVERSE POLARITY
PROTECTION
SUPPLY VOLTAGE
CURRENT CONSUMPTION
ELECTRICAL CONNECTION
ADDITIONAL DATA
DC
MPT40HD†
MPT41HD
MPT42HD
MPT43HD
1 NPN (41HD)
1 PNP (42HD)
1 NPN and 1 PNP (43HD)
250mA max. (41HD/42D)
100mA max. (43HD)
≤10µA
—
≤1VDC (42HD/41HD)
≤0.6 VDC (43HD)
≤10µs
No (40HD/41HD/42HD)
Yes (43HD)
Yes
10-30VDC
≤25mA
Quick
disconnect
type V94
DC
MPT40HD-CM†
MPT41HD-CM
MPT42HD-CM
—
1 NPN (41HD)
1 PNP (42HD)
250mA max.
≤10µA
—
≤1VDC
≤10µs
No
Yes
10-30VDC
≤25mA
Quick
disconnect
type V1
See page 509
AC
MPT20HD†
MPT21HD
MPT27HD
—
Solid state relay (21HD)
Thyristor (27HD)
5mA max. (21HD)
100mA max. (27HD)
≤400µA (21HD)
≤10µA (27HD)
12A for 16ms (21HD/22HD)
250mA for 8ms (27HD)
≤1.2VAC (21HD)
≤3V (27HD)
≤10ms (21HD)
≤2ms (27HD)
No
No
92-132VAC, 50/60Hz
≤70mA
Quick disconnect
type V93 (20HD)
type V95 (21HD/27HD)
* NOTE: Total response time is the sum of the
sensor head and base response times.
†NOTE: Emitter base only.
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
509
MINI STYLE BASE MINI RELAY BASE
Specifications
MODEL NUMBER(S)
SUPPLY VOLTAGE
POWER CONSUMPTION
OUTPUT
ELECTRICAL DC
CONTACT RATING AC
MECHANICAL LIFE OF RELAY
RESPONSE TIME*
ELECTROMAGNETIC
COMPATIBILITY COMPLIANCE
PROTECTION (IEC)
TEMPERATURE
OPERATING
STORAGE
SHOCK
VIBRATION
HUMIDITY
HOUSING MATERIAL
APPROVALS General
Purpose
LISTED
General
Purpose
CERTIFIED
ELECTRICAL
CONNECTION MPW11HD
MPW21HD
AC
MPW11HD
MPW21HD
92-132VAC, 50/60Hz
≤10VA (including load)
SPDT relay
30V/6A
125V/6A
50 x 106operations
10ms
NEMA ICS5 - 2000
See page 6
IP69K when all components
are properly assembled
-22ºF to 158ºF
-67ºF to 185ºF
20G (no contact transfer)
100G (no damage)
10G, 10-500Hz
95% RH (non-condensing)
Glass-filled Polysulfone
Yes
Yes
2-meter cable,
PVC covered,
4-conductor, #18AWG
Quick
disconnect
type V95
TEMPERATURE WORKING
RANGE STORAGE
SHOCK
VIBRATION
HUMIDITY RANGE
BASE
BASE SEAL
CABLE
ELECTROMAGNETIC
COMPATIBILITY COMPLIANCE
PROTECTION (IEC)
HOUSING MATERIAL
APPROVALS General
Purpose
LISTED
General
Purpose
CERTIFIED
-22ºF to +158ºF
-67ºF to +185ºF
50G
10G,10-500 Hz
95% RH (non-condensing)
Glass-filled polycarbonate
Santoprene
PVC (2m)
NEMA ICS5-2000
See page 6
IP69K when all components
are properly assembled
Glass-filled Polysulfone
Yes
Yes
Mini Style Base Specifications
* NOTE: Total response time is the sum of the
sensor head and base response times.
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
510
ANALOG PLUG-IN BASE
Specifications
SENSING RANGE
MODEL NUMBER(S)
OUTPUT VOLTAGE
CURRENT
LOAD CURRENT
DRIFT (68ºF to 140ºF)
(0 to 68ºF)
SHORT CIRCUIT AND
OVERLOAD PEOTECTION
REVERSE POLARITY
PROTECTION
SUPPLY VOLTAGE
POWER CONSUMPTION
REPEATABILITY
ELECTROMAGNETIC
COMPATIBILITY COMPLIANCE
PROTECTION (IEC)
TEMPERATURE
OPERATING
STORAGE
HOUSING MATERIAL
SHOCK
VIBRATION
HUMIDITY
APPROVALS General
LISTED Purpose
General
CERTIFIED Purpose
ELECTRICAL CONNECTION
DC
50mm - 500mm
MPS35HD
0-5VDC
4-20mA
5mA max.
3% typical
6% typical
No
Yes
12-24VDC
≤40mA
±1% typical
NEMA ICS5 - 2000
See page 6
IP69K when all components
are properly assembled
+32ºF to 140ºF
-67ºF to 185ºF
Glass-filled Polysulfone
50G
10G, 10-500Hz
95% RH (non-condensing)
Yes
Yes
Dependent on
receptacle selected
MODEL(S)
MPB20
MPB21
MPB22
Standard 4-terminal, 1/2” NPT conduit thread.
1.8m 5-conductor preleaded PVC cable.
5-pin mini connector
PLUG-IN RECEPTACLE
1
3
2
4
5
0
51 203 406 508102 305
Distance X [mm]
Voltage
Output Curve
APPLICATION CONSIDERATION
The MPD5HD Head emits an IR beam, which is bounced off
the detected object and returned. Depending on the distance
to the object and its reflectivity, the head produces a signal
with a magnitude proportional to the sensed distance between
the object and the head. The MPS35 uses this signal to
produce a voltage output and a current output.
The MPS35HD base provides a voltage output from 0-5VDC.
Maximum voltage occurs when the target is within 2 inches of
the head. The voltage output sources voltage to the user’s
load, which is then connected to the MPS35HD’s negative
supply terminal or ground. Current flows from the voltage
output to ground. The voltage output can only supply up to
5mA of current and therefore, the load impedance must be
1000 ohms or more. Lower impedances will produce false
output voltage readings.
The MPS35HD base also provides a current output from
4-20mA. Maximum current occurs when the target is within 2
inches of the head. The user’s load is connected from the
MPS35HD’s positive supply terminal and to the analog current
“output” terminal. The “output” pin sinks current (current flows
into it). Output current is monitored through an internal
resistor in the current amplifier. As the target is moved toward
the sense head, increased current is sent to the load and to
the sense resistor. Without limitations, this current would
produce voltages across these two resistances that would
exceed the MPS35HD’s supply voltage. Under these
conditions, the output current will reach some value and just
stay there. Therefore, to ensure proper operation of the
MPD5HD/MPS35HD sensor, the current output load resistance
cannot exceed 250 ohms. The current output can only operate
with loads of 0-250 ohms.
The MPD5HD head produces only one output signal from
which the MPS35HD produces its voltage output. The voltage
output is then used to run the current amplifier via an internal
connection. There is only one set of range and offset
adjustments provided. These adjust both the voltage and
current outputs. Due to differences in the two amplifiers, only
one output can be set accurately. Therefore only one output
should be used with the other left unconnected. Should it be
necessary to use both outputs, the voltage output must see a
minimum load resistance of 5000 ohms. This is necessary to
prevent overloading of the sensor, which could produce
incorrect output voltage and current values.
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
511
2-WIRE AC BASE
NOTE: For specifications on Models: MPS10HD, MPS13HD
and MPS30HD emitter bases, see pages 504-505
Specifications
MODEL NUMBER
SUPPLY VOLTAGE
POWER CONSUMPTION
OUTPUT
LOAD CURRENT
LEAKAGE CURRENT
INRUSH CURRENT
VOLTAGE DROP
RESPONSE TIME*
SHORT CIRCUIT AND
OVERLOAD PEOTECTION
REVERSE POLARITY
PROTECTION
ELECTRICAL CONNECTION
AC/DC
MPS14HD†
22-26VAC/DC
70mA
—
—
—
—
—
—
No
No
Dependent on receptacle selected
AC
MP2S11HD
22-260VAC
—
Solid state AC relay
500mA max.
≤1.9mA
5A/8ms
≤10V
≤2ms
No
Yes
Dependent on receptacle selected
ELECTROMAGNETIC
COMPATIBILITY COMPLIANCE
PROTECTION (IEC)
TEMPERATURE
OPERATING
STORAGE
HOUSING MATERIAL
SHOCK
VIBRATION
HUMIDITY RANGE
PLUG-IN RECEPTACLE
APPROVALS General
Purpose
LISTED
General
CERTIFIED Purpose
NEMA ICS5 - 2000
See page 6
IP69K when all components
are properly assembled
-22ºF to 158ºF
-67ºF to 185ºF
Glass-filled Polysulfone
50G
10G,10-500 Hz
95% RH (non-condensing)
Die-cast zinc
Yes
Yes
MODEL(S)
MPB20
MPB21
MPB22
Standard 4-terminal, 1/2” NPT conduit thread.
1.8m 5-conductor preleaded PVC cable.
5-pin mini connector
PLUG-IN RECEPTACLE
2-Wire AC Base Specifications
* NOTE: Total response time is the sum of the
sensor head and base response times.
†NOTE: Emitter base only.
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
512
2-WIRE AC MINI BASE
MODEL(S)
MPB20
MPB21
MPB22
Standard 4 terminal, 1/2” NPT conduit thread.
1.8m 5-conductor preleaded PVC cable.
5-pin mini connector
PLUG-IN RECEPTACLE
Specifications
MODEL NUMBER(S)
SUPPLY VOLTAGE
OUTPUT
LEAKAGE CURRENT
VOLTAGE DROP
RESPONSE TIME*
SHORT CIRCUIT AND
OVERLOAD PEOTECTION
REVERSE POLARITY
PROTECTION
ELECTROMAGNETIC
COMPATIBILITY COMPLIANCE
PROTECTION (IEC)
TEMPERATURE
OPERATING
STORAGE
HOUSING MATERIAL
APPROVALS General
LISTED Purpose
General
CERTIFIED Purpose
ELECTRICAL CONNECTION
MP2T11HD
MP2T21HD
AC
MP2T11HD
MP2T21HD
92 -132VAC, 50/60Hz
Thyristor
≤1.5mA
—
≤10ms
No
No
NEMA ICS5 - 2000
See page 6
IP69K when all components
are properly assembled
-22ºF to 185ºF
-67ºF to 185ºF
Glass filled Polysulfone
Yes
Yes
2-meter cable,
PVC covered,
4-conductor, #18AWG
Quick
disconnect
type V93
* NOTE: Total response time is the sum of the
sensor head and base response times.
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
513
Polarized Scan Sensing Characteristics
xDistance X [m]
RR1
RR6
1
3
10
Excess Gain
Excess Gain vs. Sensing Range
0.3 0.6 39
MPP1HD
xDistance X [m]
1
10
100
Excess Gain
Excess Gain vs. Sensing Range
0.1 0.2 0.5 36
MPP6HD
RR1
RR6
0
30
-30
60
-60
-100
100
Movement Characteristics
Offset Y [mm]
x
y
Distance X [m]
13467
MPP1HD/P6HD
MPP1
Max.
Recommended
Range (clean air)
MPP6
Retro-Reflective Scan Sensing Characteristics
xDistance X [m]
1
2
3
10
100
Excess Gain
Excess Gain vs. Sensing Range
0.1 0.2 3 6
MPL2HD/6HD
0
20
-20
40
-40
70
-70
Movement Characteristics
Offset Y [mm]
x
y
Distance X [m]
MPL1
0 0.5 1 2 3 5 6 7 8 9
MPL1/MPL2
Max.
Recommended
Range (clean air)
MPL2
0
70
50
30
-30
-130
100
-50
-70
-100
130
Movement Characteristics
Offset Y [mm]
x
y
Distance X [m]
14 710
MPL6HD
Standard Head Sensing Characteristics
Diffuse Scan Sensing Characteristics
10 20 200 500 800
xDistance X [mm]
1
3
2
10
100
Excess Gain
Excess Gain vs. Sensing Range MPD6HD
0 0.5 1 1.5 2 2.5 3
x
y
Distance X [m]
MPD2
MPD1
-10
-20
-30
-40
0
10
20
30
40
Offset Y [mm]
Movement Characteristics MPD1/D2
Max.
Recommended
Range (clean air)
00.5 1
x
y
Distance X [m]
MPD4
MPD6
-0.1
-0.2
-0.4
-0.6
0
0.1
0.2
0.4
0.6
Offset Y [mm]
Movement Characteristics MPD4HD/6HD
Convergent Scan
Sensing Characteristics
152.4
127.0
76.2 101.6
25.4 50.8
0
Distance X [mm]
MPC26HD
MPC6HD
1
5
3
11
9
7
13
15
Excess Gain
Excess Gain vs. Sensing Range MPC6HD/MPC26HD
x
Diffuse Beam Sensing Characteristics
.03 0.3 3
xDistance X [m]
1
2
5
10
20
100
Excess Gain
Excess Gain vs. Sensing Range MPD2HD
0 500 1000 1270
x
Distance X [mm]
0
50
100
150
200
Excess Gain
Excess Gain vs. Sensing Range MPD4HD
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
514
Standard Head Sensing Characteristics
Fiber Optic Sensing Characteristics
0520 40 60 80 100
x
y
Distance X [mm]
-5
-10
0
5
10
Offset Y [mm]
Movement Characteristics MPF1HD/MPF6HD/MPG6HD
Max.
Recommended
Range (clean air)
0
6.10
4.06
-2.03
2.03
8.13
10.16
-10.16
Movement Characteristics
Offset Y [mm]
x
y
Distance X [mm]
0 12.7 25.4 38.1 50.8 65.5
MPF2HD/MPG2HD
-6.10
-4.06
-8.13
PAD6-M
B2B-3
0 .003 .025 0.2 0.8 2
xDistance X [m]
1
5
10
50
100
600
1000
Excess Gain
Excess Gain vs. Sensing Range MPF1HD/MPF6HD
DIFFUSE
Typical Scan Distances for MP Series Fiber Optics (Clean Air)
SENSOR Scan Technique Glass W/O Lens Glass W/Lens Plastic W/O Lens Plastic W/Lens
(Accessories FE-FZ-L3) (Accessories FE-PA-L1)
MPF6HD Diffuse 100mm N/A N/A N/A
MPF1HD
Thru-Beam 500mm 3m N/A N/A
MPG6HD
MPFE6HD Thru-Beam 762mm 46mm N/A N/A
MPFR6HD
MPF2HD Diffuse 36mm N/A 14mm N/A
MPG2HD Thru-Beam 178mm 690mm 76mm 762mm
Actual distance is limited by length of cables used. Distance values are given as a guide
to relative optical power and rating using 3ft. glass and 1m plastic cables.
Thru-Beam Scan Sensing Characteristics
70
60
304
xDistance X [m]
1
3
2
10
100
Excess Gain
Excess Gain vs. Sensing Range
with Glass Cable MPEHD/MPRHD
0
750
200
-200
-750
1250
-1250
1750
-1750
02040506010330
x
y
Distance X [m]
Offset Y [mm]
Movement Characteristics MPE6HD/MPR6HD
Max.
Recommended
Range (clean air)
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
515
Diffuse Scan Sensing Characteristics
00.24 0.48 0.76 1.0 2.3
1.71.51.4 2.0
xDistance X [m]
Excess Gain
Excess Gain vs. Sensing Range MP2D1HD/D2HD/D4HD
100
10
1
MP2D1
MP2D2
MP2D4
0 .01 0.3 0.4 0.6 0.7 0.9
x
y
Distance X [m]
-12
-25
-38
0
12
25
38
Offset Y [mm]
Movement Characteristics MP2D4HD
0 0.3 0.6 0.9 1.2 1.5 1.8
x
y
Distance X [m]
-12
-25
-38
-50
0
25
12
38
50
Offset Y [mm]
Movement Characteristics MP2D1HD/MP2D2HD
MP2D1
MP2D2
2-Wire AC Head Sensing Characteristics
Polarized Scan Sensing Characteristics
xDistance X [m]
100
10
1
Excess Gain
Excess Gain vs. Sensing Range
0 1.5 3.5 4.6 6.1 7.6 9.1
MP2P1HD
Distance X [m]
152
-152
101
-101
50
-50
0
Offset Y [mm]
Movement Characteristics
01.5 3.5 4.6 6.1 7.6 9.1
MP2P1HD
x
y
Convergent Scan Sensing Characteristics
xDistance X [mm]
MP2C4
MP2C2
Excess Gain
Excess Gain vs. Sensing Range MP2C2HD/C4HD
102
38
101
50 63 76 88 101 114
100
25 122
0
1.5
0.7
-0.7
-1.5
2.0
-2.0
3.0
-3.0
24 33 35 46 48 503027 38 40 43
x
y
Distance X [mm]
Offset Y [mm]
Movement Characteristics MP2C2HD
0.00
2.54
1.27
-1.27
3.80
-3.80
-2.54
5.00
-5.00
76 88 102 108 114 120 127
84 95
x
y
Distance X [mm]
Offset Y [mm]
Movement Characteristics MP2C4HD
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
516
Fiber Optic Sensing Characteristics
0382513 51 64 76 88 100
x
Distance X [mm]
Excess Gain
Excess Gain vs. Sensing Range
with Glass Cable (FE-B2B-3) MP2F1HD/F2HD
100
1000
10
1
MP2F1
MP2F2
Fiber Optic-Diffuse Scan MPF2F1HD/F2HD
Glass cable (FE-B2B-3)
Distance X [mm]
MP2F1
MP2F2
Excess Gain
102
101
510 15 20 25
100
037
x
Excess Gain vs. Sensing Range
with Plastic Cable (FEF-PAD6-M)
MP2F1HD/F2HD
Thru-Beam Scan Sensing Characteristics
x
Excess Gain
Excess Gain vs. Sensing Range MP2R2HD
10,000
10
3
100
30
1
0.3
1000
300
Distance X [m]
0
0.9
-0.9
0.6
-0.6
0.3
-0.3
1.2
-1.2
1.5
-1.5
0 12 243036618
x
y
Distance X [m]
Offset Y [m]
Movement Characteristics MP2R2HD/MPE4HD
Fiber Optic-Diffuse Scan MPF2F1HD/F2HD
2-Wire AC Head Sensing Characteristics
Retro-Reflective Scan Sensing Characteristics
xDistance X [m]
100
10
1
Excess Gain
Excess Gain vs. Sensing Range MP2L1HD/L2HD
0 1.5 3.5 4.6 6.1 7.6 9.1 10.7 12.2
MP2L2
MP2L1
Distance X [m]
MP2L2
MP2L1
203
-203
152
-152
101
-101
50
-50
0
Offset Y [mm]
Movement Characteristics
0 1.5 3.5 4.6 6.1 7.6 9.1 10.7 12.2
MP2L1HD/MP2L2HD
x
y
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
517
Green (Metal Base Only)
DC
A
nalog
1
2
3
4
(-)
(+)
I Load
V Load
Model: MPS35HD
Wiring Diagrams
AC
Terminal Connection
Green (Metal Base Only)
A
C
1
2
3
4
L1
N
Model: MPS10HD
Green (Metal Base Only)
A
C
1
2
3
4
L1
L2
Model: MPS13HD
Green (Metal Base Only)
C
1
2
3
4
L1
N
Relay Output
NOTE: Pins 3 and 4 must be
jumpered (jumper wire not included)
Model: MPS11HD
Green (Metal Base Only)
C
1
2
3
4
L1
L2
Relay Output
NOTE: Pins 3 and 4 must be
jumpered (jumper wire not included)
Model: MPS12HD
Green (Metal Base Only)
AC 1
3
2
4
7
6
8
5
L1
N.O. 1
COM.1
N.C.1
N
N.O.2
COM.2
N.C.2
Model: MPSD11HD
DC Red
Black
White
(-)
(+)
Load
Model: MPT32HD
Model: MPT33HD
Green (Metal Base Only)
AC
1
2
3
4
L1 115V AC
N
L2(-/+)
L1(+/-) 115-300V AC/DC
Load
Model: MPS17HD
A
C1
2
NO
C
NC
L1
N.O.
COM.
N.C.
N
Model: MPV11HD
A
C1
2
NO
C
NC
L1
N.O.
COM.
N.C.
L2
Model: MPV12HD
A
C1
2
NO
C
NC
L1 24 VAC
N.O.
COM.
N.C.
N
Model: MPV13HD
A
CBlack
White
L1
N
Model: MPT10HD
A
CBlack
Red
Orange
White
L1 115 VAC
L1 (+/-)115-300V AC/DC
N
L2 (-/+)
Load
Model: MPT17HD
A
CBlack
Red
Orange
White
L1
Relay Output
N
Model: MPT11HD
A
CBlack
White
L1 24VAC
N
Model: MPT14HD
A
CBlack
White
Orange
Red
Blue
L1
N.O.
COM.
N.C.
N
Model: MPW11HD
Green (Metal Base Only)
A
C
1
2
3
4
L1 20-260 VAC
L2
Load
Model: MP2S11HD
AC Black
White N
L1
Load
Model: MP2T11HD
Green (Metal Base Only)
DC
1
2
3
4
(-)
(+)
Model: MPS30HD
Green (Metal Base Only)
DC
1
2
3
4
(-)
(+)
Load
Load
Model: MPS33HD
Green (Metal Base Only)
DC
1
2
3
4
(-)
(+)
Load
Load
Model: MPS31HD
Green (Metal Base Only)
DC
1
2
3
4
(-)
(+)
Load
Model: MPS32HD
DC 1
2
NO
C
NC
(+)
N.O.
COM.
N.C.
(-)
A
C/DC 1
2
NO
C
NC
L1(+/-) 20-260 VAC/DC
N.O.
COM.
N.C.
L2(-/+)
Model: MPV14HD
DC Red
Black (-)
(+)
White
Load
Model: MPT31HD
Model: MPV31HD
A
C/DC
1
2
3
4
L1(+/-) 24V AC/DC
N(-/+)
L2(-/+)
L1(+/-) 24-300V AC/DC
Load
Model: MPS16HD
Green (Metal Base Only)
A
C/DC
1
2
3
4
L1(+/-) 12-140V AC/DC
N(-/+)
N(-/+)
L1(+/-) 12-140V AC/DC
Load
Model: MPS18HD
DC
Black
Red (+)
(-)
Model: MPT30HD
DC
Terminal Connection
AC
Cable Connection
DC
Cable Connection
DC
Terminal Analog
Connection
AC/DC
Terminal Connection
DC
Orange
Red
Black
White
(-)
(+)
Load
Load
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
518
A
C5 Black
2 Red
4 Orange
1 White
L1 115 VAC
L1 (+/-)115-300V AC/DC
N
L2 (-/+)
Load
Load
White
Orange
Red
Black L1
Output
N
1
2
3
4
5
Model: MPT27HD
A
C5 Black
1 White
4 Orange
2 Red
3 Green
L1
N.O. N.O.
COM.
COM.
N.C.
N.C.
N
Orange
Green
Red
White
Black L1
N
1
2
3
4
5
Model: MPW21HD
A
C/DC Black
Red
Orange
White
L1 (+/-)24V AC/DC
L1 (+/-)24-300V AC/DC
N (-/+)
L2 (-/+)
Load
Model: MPT16HD
A
C5 Black
2 Red
4 Orange
1 White
L1
Relay Output
Relay Output
NWhite
Orange
Red
Black L1
N
1
2
3
4
5
Model: MPT21HD
A
C/DC Black
Red
Orange
White
L1 (+/-)12-140V AC/DC
L1 (+/-)12-140V AC/DC
N (-/+)
N (-/+)
Load
Model: MPT18HD
A
C 2 Black
3 White
L1
N
1
2
3Black
White
L1
N
Model: MPT20HD
Model: MP2T21HD
Model: MPT40HD-CM
Model: MPT41HD-CM
Model: MPT42HD-CM
DC
H76
H77
3 Red
1 Black (-)
(+)
41
32
Red
Black
(+)
(-)
Model: MPT40HD
A
C/DC 5 Black
2 Red
4 Orange
1 White
L1 (+/-)12-140V AC/DC
L1 (+/-)12-140V AC/DC
N (-/+)
N (-/+)
Load
Load
White
Orange
Red
Black L1
Output
N
1
2
3
4
5
Model: MPT28HD
Green (Metal Base Only)
Mini
1 Orange
2 White
3 Black
4 Red Green
White
Orange
Red
Black
2
4
5
1
3
Model: MPB22
Green (Metal Base Only)
Micro
1 Black
2 Brown
3 Blue
4 White
12
4 3
White
Black
Blue
Brown
Model: MPB27
DC
H76
H77
3 Red
1 Black (-)
(+)
41
32
Red
White
Black
(+)
(-)
2 White
Load
Load
Model: MPT41HD
41
32
Red
White
Black
Green
(+)
(-)
Load
Load
DC
H76
H77 4 Green
3 Red
1 Black
2 White
(-)
(+)
Load
Load
Model: MPT43HD
DC
H76
H77
3 Red
1 Black (-)
(+)
41
32
Red
White
Black
(+)
(-)
2 White
Load
Load
Model: MPT42HD
Wiring Diagrams
AC/DC
Cable Connection
AC
Mini Quick Disconnect
Note: Wiring diagrams show
quick disconnect pin numbers.
DC
Mini Quick Disconnect
Note: Wiring diagrams show
quick disconnect pin numbers.
DC
Micro Quick Disconnect
Note: Wiring diagrams show
quick disconnect pin numbers.
AC/DC
Mini Quick Disconnect
Note: Wiring diagrams show
quick disconnect pin numbers.
A
C 2 Black
3 White Load
L1
N
1
2
3Black
White
L1
N
Load
(+)
( – )
1 Brown
3 Blue
DC
(+)
( – )
Blue
Brown
12
43
(+)
( – )
1 Brown
3 Blue
4 Black
DC
Load
12
43
Blue
Black
Brown
Load
(+)
( – )
(+)
( – )
1 Brown
3 Blue
4 Black
DC
Load 12
43
Blue
Black
Brown
Load
(+)
( – )
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
519
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
Dimensions (mm)
137.2 REF
40.6
10.2
85.9
59.4
43.2
7.6
29.5
52.3
SENSOR HEAD, BASE AND RECEPTACLE DIMENSIONS
SENSOR HEAD WITH MINI RELAY BASE DIMENSIONS QUICK DISCONNECT MINI BASE DIMENSIONS
FIBER OPTIC SENSOR HEAD DIMENSIONS
52.3 52.3
39.6
16.5
20.6
10—32 UNF—2B
Tapped from rear
12.7/.500 min
depth (2)
5.1 DIA (2)
Mounting Holes
1/2—14 NPT
55.2
50.2
47.2
43.2
39.2
43.2
25.4
5.1
43.7
39.6
25.4
4.44
6.4
M30 X 1.5
1/2—1/4 NPSM
Front
Mount
7
4.44 DIA
Mounting
Hole
90.3
15.2
52.3
19.8
7/8—16 UN—2A
M30 x 1.5
6.1
25.4 Ø
54.4
39.6 SQ
25.4
4.6
5.1
15.2
25.4
40.6
6.4
Mounting
Hole
4.4 Ø
Mounting
Hole
19 Ø
3.8
QUICK DISCONNECT MICRO BASE DIMENSIONS
M12x1
M30 x 1.5
8
25.4 Ø
55
39.6 SQ
25.4
4.6
5.1
15.2
25.4
40.6
6.4
Mounting
Hole
4.4 Ø
Mounting
Hole
5.4
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
520
MULTIFUNCTION TIMER/LOGIC CARD
Plug-in timer/logic cards easily convert any ON/OFF MP Series photoelectric into a multifunction control. Seven DIP
switches located on the timer card provide the user with a choice of seven delay functions including dual delay and
motion detection. In addition, light operated or dark operated sensing can be selected by a switch located on the
photoelectric sensor head.
TIME DELAY OPTIONS
The timer/logic cards can be set up to modify the sensor’s head output signal. For instance, in thru-scan or reflective scan
(L.O. mode), if the logic card is set for OFF delay the sensor does not immediately turn off its output circuit after the
beam goes dark or is blocked. Instead it waits until the beam has been dark for a preset time. If set for ON delay, the
sensor waits for a preset to time to recognize that the beam is complete.
Each timer/logic card has seven DIP switches to select ON delay, OFF delay, or both. The delays range as shown
in the Specifications and Order Guide. The cards also offer totally independent range selection and adjustment for
ON and OFF delays.
ONE SHOT OPTIONS
In addition, the timer/logic card offers four modes of operation: 1-shot, a delayed 1-shot, 1-shot drop, and a delayed
1-shot drop. The cards can be adjusted for both the width of the 1-shot pulse and the length of delay before the
1-shot is fired.
TIMING OPTION SETTINGS
Prior to inserting a multifunction timer card into the photoelectric sensor head, you must properly set DIP switches
located on the card. You must also set the L.O./D.O. switch located in the photoelectric sensor head.
TIMING ADJUSTMENTS
On the top of the MP Series photoelectric sensor head is an access cover. When opened with a small blade screwdriver,
the multi-turn timer adjustment screws, labeled “1” and “2,” are exposed.
Clockwise rotation increases the time range(s). If a single delay option is selected, the other timer adjustment is automatically
set to zero. When the sensor head has been set to the desired timing range(s), snap the access cover shut to provide
proper head sealing.
Multifunction Logic Cards
Model No. Description
MPA1HD 0.15 to 15 sec. time adjustment
MPA133HD 0.001 to 0.1 sec. adjustment
MPA155HD 1 to 30 sec. adjustment
MPA188HD 0.01 to 1 sec. adjustment
FOR A COMPLETE CONTROL
• Multifuction Time/logic Card
• Photoelectric Sensor Head
• Reflector (Retro and Polar Scans)
CHOICE OF:
• Plug-in base
• Plug-in Receptacle
• Mini Base
• Relay Base
+
12S
-
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
521
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
Timing Options Settings
DIP switches on the card are labeled 1-7, with OFF position toward the labels.
Refer to the timing chart below for DIP switch settings and their results for a
retro-reflective or thru-beam setup.
Timing/Ajustment
T1 denotes screw adjustment 1
T2 denotes screw adjustment 2
MULTI-FUNCTION TIMER/LOGIC CARD
DIP SWITCHES 1-7
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
522
Output is OFF
Output is ON
Output is OFF
Output is ON
Output is OFF
Output turns on after the time
delay period has expired.
Output is OFF
Output is ON
Output is ON
Output is OFF
Output is OFF
Output is ON
Output is ON
TARGET MOVING CONDITIONS
Output is ON
Output is OFF
Output doesn’t turn on until the
time delay period has expired.
Output is OFF
Output is ON
Output will not turn off until the
time delay has expired.
Output doesn’t turn on until the
time delay period has expired.
Output turns off after the time
delay period has expired.
The output turns on as soon as
the target is present. The output
will remain on only for the amount
of time set.
Output turns off only for the
amount of time set. When that
time expires, the output will
turn back on.
Output remains ON
Output is OFF
Output turns on after the time delay
period expires. Output turns on only
for the time period set. When that time
expires, the output will turn back off.
Output is ON
Output turns off after the time delay
period expires. Output turns on only
for the time period set. When that time
expires, the output will turn back on.
TARGET NOT MOVING CONDITIONS
Output is OFF
Output is ON
Output is OFF
Output doesn’t turn back on until
the delay period has expired.
Output remains on for the amount
of time set for the off delay.
The output turns off when the
delay period has expired.
Output turns back on.
Output doesn’t turn back off until
the time delay period has expired
Output turns back on after the
delay period has expired.
If the time set for the output to turn
on has not run out, the output will
remain on. If the time set for the
output to remain on expired while
the target was still in front of the
sensor and the output turned back
off, the output will remain off.
If the time set for the output to turn
off has not expired, the output will
remain off. If the time set for the
output to remain off expired while
the target was still in front of the
sensor and the output turned back
on, the output will remain on.
Output turns off only for the amount
of time set. When that time expires,
the output will turn back on.
Output turns on after the time delay
period has expired. Output remains
on only for the time period set,
when that time expires the output
will turn back off.
Output remains off if the one shot
time period has expired. If the one
shot period hasn’t expired,
the output will remain on.
Output turns off after the time delay
period has expired. Output turns off
only for the time period set,
when that time expires, the output
will turn back on.
Output remains off if the one shot
time period had expired. If the one
shot period hasn’t expired,
the output will remain on.
TARGET
Reflector
NO TARGET
TARGET
Reflector
Leading Edge
TARGET PRESENT
LEADING EDGE
TARGET GONE
TRAILING EDGE
TARGET
Reflector
Trailing Edge
Dark On
Light On
Dark On
Light On
Dark On
Light On
Dark On
Dark On
Light On
Dark On
Light On
Dark On
Light On
Light or Dark
On
Light or Dark
On
ON Delay
OFF Delay
ON/OFF Delay
1-shot
1-shot
Drop
Delayed
1-shot
Delayed
1-shot Drop
Motion Detector
OFF with no
Motion
Motion Detector
ON with no
Motion
Photoelectric MP Series Modular
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
523
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
Mounting Brackets
Optional mounting brackets (MPZB01 or
MPZB02) can be provided that fit around the
treaded portion of the mini base. The brackets
allow the base to rotate 360º degrees. A 30mm
mounting nut and lockwasher is included for
securing the mini base to the bracket.
Swivel Mounting Brackets
The basic ball and swivel mounting bracket (360º swivel 10º tilt)
consists of two plastic brackets and the spherical plastic swivel
nut. The swivel nut has M30 threading for direct installation of the
MPT (mini MP base), including the quick disconnect versions. The
bracket (MPZB06) can be directly mounted to a surface, or the
MPZB07 mounting plate may be used. The MPZB08 adapter allows
you to connect the ball and swivel bracket to the MP relay (MPV)
and MP plug-in bases (MPS).
Accessories
Mounting Brackets
Exploded View of MPZB06
MPZB12
Model No. Description
MPZB01 Mini MP mounting bracket, vertical slots
MPZB02 Mini MP mounting bracket, circular slots
MPZB05 Photoswitch 5000 to plug-in adapter
(requires L shaped underbracket)
MPZB06 Ball and swivel mounting bracket
(fits 30mm mini MP)
MPZB07 Ball and swivel vertical mounting plate
MPZB08 Adapter (use with MPZB06 to fit 1/2” conduit hole)
MPZB12 Photoswitch 4000 (MLS8C) to limit switch style
(combination of the MPZB11 and FE-MB8)
MPZB14 Combination of the MPZB06 and MPZB07 bracket
45 deg. TYP
25.4
54.6 R (12)
7.1 Ø
44.5 Ø
7.1 Ø (2)
44.5
54.6
29.2
71.1
31.8
54.6
29.2
71.1
31.8
19.1 (2) 30.5
31.8
16
22.9 R
3 MAX R (2)
31.8
19.1 (2) 30.5
31.8
16
22.9 R
3 MAX R (2)
31.8
MPZB01
MPZB02
Other Accessories
Model No. Description
MPZFOADPT Pair of fiber cable adapters allows use of cutable
1000 micron plastic cable
MPZN01 Mini base steel mounting nut and lockwasher
MPZN02 Mini base plastic mounting nut and lockwasher
MPGKITC Pair of cable end tips and accessories for universal cables
MPZR01 Replacement relay for MPV series—6A SPDT
MPZR02 Replacement relay for MPSD series—5A DPDT
MPZB11
FE-MB8
Screw (2) 10.32
on 2.0 (50.8) center
Nut—Special
Modular Photoelectric
Control
Bracket (2)
Nut (2)
Washer (2)
MPZB07
(Dimensions in mm)
Notes
524
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
Photoelectric Sensors
Photoelectric MP Series Modular