Photoelectric Sensors MP Series MP Series modular sensors enable users to customize a sensing solution for almost any application. For this reason, the components of this series are sold separately. Refer to pages 496-497 for instruction on how to assemble an MP Series sensor. Convergent Beam Mode Features: * Adjustable focal range * Background and foreground suppression Sensing Range: 38mm, 100mm Outputs: Dependent on base selected Retro-Reflective Mode Features: * Polarization filter to detect shiny objects Sensing Ranges: 1.8m, 4.5m, 6m, 9m Outputs: Dependent on base selected Fiber Optic Mode Sensing Ranges: Dependent on fibers selected Outputs: Dependent on base selected PEPPERL+FUCHS * Harsh Duty * Modular design - Exchangeable rotatable heads - Limit switch and mini style plug-in bases - Screw terminal, preleaded, and connector version receptacles * Withstands 1200 psi washdown, IP69K * 6 Amp SPDT and 5 Amp DPDT relay models * Multifunction timer/logic cards available * DC, AC, AC/DC models Diffused Mode Photoelectric MP Series Modular Modular Photoelectric Sensors Sensing Ranges: 0.3m, 0.45m, 0.76m. 0.9m, 1.3m, 1.8m, 3m Outputs: Dependent on base selected Thru-Beam Mode Sensing Range: 30m, 36m, 60m Outputs: Dependent on base selected See page 513-524 for MP Series sensing charateristics, wiring, dimensions and accessories. Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 495 1. BUILD AN MP SENSOR SELECT A HEAD STANDARD HEADS (pages 498-500) Photoelectric MP Series Modular MP Sensor Head Plug-in/DPDT Relay Base SPDT Relay Base Models Convergent Beam: 38mm focal point, 1ms response, plastic lens, infrared Convergent Beam: 100mm focal point, 1ms response, plastic lens, infrared MPC26HD MPC6HD Diffuse: 0.45m range, 1ms response, plastic lens, infrared Diffuse: 3m range, 10ms response, glass lens, infrared Diffuse: 3m range, 10ms response, plastic lens, infrared Diffuse: 0.9m range, 10ms response, plastic lens, infrared Diffuse: 1.3m range, 10ms response, plastic lens, infrared MPD6HD MPD1HD MPD2HD MPD4HD MPD8HD Polarized Retro-Reflective: 4.5m range, 1ms response, glass lens, visible red Polarized Retro-Reflective: 6m range, 10ms response, glass lens, visible red Retro-Reflective: 9m range, 1ms response, glass lens, infrared Retro-Reflective: 9m range, 1ms response, plastic lens, infrared Retro-Reflective: 9m range, 10ms response, glass lens, infrared Retro-Reflective: 9m range, 10ms response, plastic lens, infrared Retro-Reflective: 1.8m range, 1ms response, plastic lens, infrared MPP6HD MPP1HD MPL16HD MPL6HD MPL1HD MPL2HD MPK2HD Thru-Beam: 30m range, transmitter, plastic lens, infrared Thru-Beam: 30m range, receiver, 10ms response, plastic lens, infrared Thru-Beam: 60m range, transmitter, glass lens, infrared Thru-Beam: 60m range, transmitter, plastic lens, infrared Thru-Beam: 60m range, receiver, 1ms response, glass lens, infrared Thru-Beam: 60m range, receiver, 1ms response, plastic lens, infrared Thru-Beam: 60m range, receiver, 10ms response, glass lens, infrared MPE8HD MPR8HD MPE1HD MPE2HD MPR16HD MPR6HD MPR1HD MPF Fiber Optic: 1ms response, infrared MPF Fiber Optic: 10ms response, infrared MPF Fiber Optic: 5ms response, visible red MPG Fiber Optic: 1ms response, infrared MPG Fiber Optic: 5ms response, visible red MPF6HD MPF1HD MPF2HD MPG6HD MPG2HD Inductive Sensor Head: side sensing, 13mm range (page 203) Inductive Sensor Head: top sensing, 13mm range (page 203) NBB13SIDE NBB13TOP ANALOG HEADS (page 500) Models Diffuse: 50mm to 500mm range, plastic lens, infrared MPD5HD MPF Fiber Optic: infrared MPF5HD Mini Style Base 2-WIRE AC HEADS (pages 501-502) MP Sensor Receptacle 496 Models Convergent Beam: 38mm range, plastic lens, infrared Convergent Beam: 100mm range, plastic lens, infrared MP2C2HD MP2C4HD Diffuse: 300mm range, plastic lens, infrared Diffuse: 760mm range, plastic lens, infrared Diffuse: 1.8m range, glass lens, infrared Diffuse: 1.8m range, plastic lens, infrared MP2D7HD MP2D4HD MP2D1HD MP2D2HD Polarized Retroreflective: 4.5m range, glass lens, visible red Retroreflective: 9m range, glass lens, infrared Retroreflective: 9m range, plastic lens, infrared MP2P1HD MP2L1HD MP2L2HD Thru-Beam: 36m range, transmitter, glass lens, infrared Thru-Beam: 36m range, transmitter, plastic lens, infrared Thru-Beam: 36m range, receiver, plastic lens, infrared MPE3HD MPE4HD MP2R2HD MPF Fiber Optic: infrared MPF Fiber Optic: visible red MP2F1HD MP2F2HD PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 2. 3. SELECT A BASE RECEPTACLE MPS18HD 10-30VDC emitter base only, 3-wire DC 10-30VDC NPN and PNP, 4-wire DC 10-30VDC NPN N.O./N.C., 3-wire DC 10-30VDC PNP, 3-wire DC MPS30HD MPS33HD MPS31HD MPS32HD 198-264VAC 4-wire solid state AC relay 1A max. 198-264VAC emitter base only 92-132VAC 4-wire bilateral FET (AC/DC) 100mA max. 92-132VAC 4-wire solid state AC relay 1A max. 92-132VAC emitter base only MPS12HD MPS13HD MPS17HD MPS11HD MPS10HD Standard 4-terminal, 1/2" NPT conduit thread Standard 4-terminal, pg13.5 conduit thread 1.8m, 5-conductor cable 3.6m, 5-conductor cable 3.6m, 5-conductor preleaded Super-trex cable 5-pin mini connector 4-pin micro connector DC AC AC DPDT RELAY BASE (page 505) Model DPDT, 92-132VAC, 5A, output indicator RELAY MPSD11HD SPDT RELAY BASES (page 506) DC SPDT RELAY AC MPV31HD SPDT, 103-132VAC, 6A SPDT, 192-264VAC, 6A SPDT, 20-260VAC/VDC, 6A SPDT, 22-26VAC, 6A MPV11HD MPV12HD MPV14HD MPV13HD MINI RELAY AC 22-26VAC/VDC, 4-wire bilateral FET, 100mA max., 2m preleaded cable 10.8-140VDC/18-140VAC, 4-wire FET w/output ind., 2m preleaded cable 10-30VDC, 2m preleaded cable, emitter base only 10-30VDC, NPN N.O., 2m preleaded cable 10-30VDC, PNP N.O., 2m preleaded cable 10-30VDC, NPN and PNP, N.O., 2m preleaded cable 22-26VAC, 2m preleaded cable, emitter base only 92-132VAC, 2m preleaded cable, emitter base only 92-132VAC, 4-wire bilateral FET (AC/DC), 100mA max., 2m preleaded cable 92-132VAC, 4-wire solid state AC relay, 0.5A max., 2m preleaded cable 10-30VDC, NPN N.O., 4-pin micro connector 10-30VDC, PNP N.O., 4-pin micro connector 10-30VDC, 4-pin micro connector, emitter base only 10-30VDC, NPN and PNP, 4-pin mini connector 10-30VDC, NPN N.O., 4-pin mini connector 10-30VDC, PNP N.O., 4-pin mini connector 10-30VDC, 4-pin mini connector, emitter base only 92-132VAC, 3-pin mini connector, emitter base only 92-132VAC, 4-wire solid state AC relay, 0.5A max., 5-pin mini connector 92-132VAC, 4-wire bilateral FET (AC/DC), 100mA max., 5-pin mini connector 92-132VAC, 6A, SPDT relay, 2m preleaded cable 92-132VAC, 6A, SPDT relay, 5-pin mini connector ANALOG 12-24 VDC analog output (0-5 VDC or 4-20mA) 3-WIRE DC 4-WIRE AC MICRO CONNEC. DC MINI CONNEC. DC MINI CONNEC. AC Models ANALOG PLUG-IN BASE (page 510) MPT16HD MPT18HD MPT30HD MPT31HD MPT32HD MPT33HD MPT14HD MPT10HD MPT17HD MPT11HD MPT41HD-CM MPT42HD-CM MPT40HD-CM MPT43HD MPT41HD MPT42HD MPT40HD MPT20HD MPT21HD MPT27HD MPW11HD MPW21HD Models 10-30 VDC emitter base only MPS30HD 2-WIRE AC 92-132 VAC emitter base only 198-264 VAC emitter base only 22-26 VAC/VDC emitter base only 22-260 VAC plug-in base MPS10HD MPS13HD MPS14HD MP2S11HD 2-WIRE AC 92-132 VAC mini base, 2m preleaded cable 92-132 VAC mini base, 3-pin connector 2-WIRE AC MINI STYLE BASES (page 512) PEPPERL+FUCHS MPB30 MPB21 MPB25 MPB26 MPB22 MPB27 DPDT RECEPTACLE Models 8-terminal, 1/2" NPT conduit hole 8-terminal, 3/4" NPT conduit hole MPB23 MPB24 NO RECEPTACLE NEEDED ELECTRICAL CONNECTION KEY Terminal connectors Mini connectors Micro connectors Preleaded cable NO RECEPTACLE NEEDED Model MPS35HD 2-WIRE PLUG-IN BASES (page 511) DC MPB20 Models SPDT, 10-30VDC, 6A MINI STYLE BASES (pages 507-509) AC/DC Models Photoelectric MP Series Modular Models 10.8-140VDC/18-140VAC 4-wire FET w/output indicator PLUG-IN BASES (pages 504-505) AC/DC SELECT A RECEPTACLE RECEPTACLE Standard 4-terminal, 1/2" NPT conduit thread 1.8m, 5-conductor cable 5-pin mini connector Models MPB20 MPB21 MPB22 Models MP2T11HD MP2T21HD NO RECEPTACLE NEEDED Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 497 Photoelectric Sensors STANDARD HEADS Photoelectric MP Series Modular Convergent Beam Mode Specifications SENSING RANGE Infrared 38mm 100mm Yes Yes MPC26HD MPC6HD 1ms 1ms Polycarbonate Polycarbonate Plastic Plastic SENSITIVITY ADJUSTMENT MODEL NUMBER(S) RESPONSE TIME* HOUSING MATERIAL LENS See page 503 ADDITIONAL DATA * NOTE: Total response time is the sum of the sensor head and base response times. Diffused Mode Specifications SENSING RANGE Infrared 0.45m 0.9m 1.3m 3m Yes Yes Yes Yes MPD6HD MPD4HD MPD8HD MPD1HD -- -- -- MPD2HD 1ms 10ms 10ms 10ms Polycarbonate Polycarbonate Polycarbonate Polycarbonate Plastic Plastic Plastic Glass (1HD) Plastic (2HD) SENSITIVITY ADJUSTMENT MODEL NUMBER(S) RESPONSE TIME* HOUSING MATERIAL LENS ADDITIONAL DATA See page 503 * NOTE: Total response time is the sum of the sensor head and base response times. 498 PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com Photoelectric Sensors STANDARD HEADS Retro-Reflective Mode SENSING RANGE Infrared Visible Red Infrared 1.8m 4.5m 6m 9m Yes Yes Yes Yes SENSITIVITY ADJUSTMENT POLARIZED FILTER No Yes Yes No MPK2HD MPP6HD MPP1HD MPL16HD -- -- -- MPL6HD -- -- -- MPL1HD -- -- -- MPL2HD 1ms 1ms 10ms 1ms (16HD/6HD) 10ms (1HD/2HD) Polycarbonate Polycarbonate Polycarbonate Polycarbonate Plastic Glass Glass Glass (1HD/16HD) Plastic (2HD/6HD) MODEL NUMBER(S) RESPONSE TIME* HOUSING MATERIAL LENS See page 503 ADDITIONAL DATA * NOTE: Total response time is the sum of the sensor head and base response times. Photoelectric MP Series Modular Specifications Thru-Beam Mode Specifications SENSING RANGE Infrared 30m 60m Yes Yes SENSITIVITY ADJUSTMENT MODEL NUMBER(S) TRANSMITTER MPE8HD MPE1HD RECEIVER MPR8HD MPR16HD TRANSMITTER -- MPE2HD RECEIVER -- MPR6HD RECEIVER -- MPR1HD 10ms 1ms (16HD/6HD) 10ms (1HD) Polycarbonate Polycarbonate Plastic Glass (1HD/16HD) Plastic (2HD/6HD) RESPONSE TIME* HOUSING MATERIAL LENS See page 503 ADDITIONAL DATA * NOTE: Total response time is the sum of the sensor head and base response times. PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 499 Photoelectric Sensors STANDARD HEADS Photoelectric MP Series Modular Fiber Optic Mode Specifications Visible Red Infrared Determined by cable* Determined by cable* SENSING RANGE SENSITIVITY ADJUSTMENT Yes Yes MPF2HD MPF6HD MPG2HD MPG6HD -- MPF1HD 5ms 1ms (6HD) 10ms (1HD) Polycarbonate Polycarbonate MODEL NUMBER(S) RESPONSE TIME* HOUSING MATERIAL See page 503 ADDITIONAL DATA * NOTE: Total response time is the sum of the sensor head and base response times. *See pages 731-762 for glass and plastic fiber optic lengths and specifications. ANALOG HEADS Diffused Mode Specifications Fiber Optic Mode Infrared 50-500mm SENSING RANGE SENSITIVITY ADJUSTMENT MODEL NUMBER(S) LENS ADDITIONAL DATA Yes MPF5HD RESPONSE TIME* Polycarbonate HOUSING MATERIAL ADDITIONAL DATA Plastic See page 503 * NOTE: Total response time is the sum of the sensor head and base response times. Determined by cable* SENSING RANGE MODEL NUMBER(S) 10ms HOUSING MATERIAL Infrared SENSITIVITY ADJUSTMENT Yes MPD5HD RESPONSE TIME* Specifications 10ms Polycarbonate See page 503 * NOTE: Total response time is the sum of the sensor head and base response times. *See pages 731-762 for glass and plastic fiber optic lengths and specifications. 500 PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com Photoelectric Sensors 2-WIRE AC HEADS Convergent Beam Mode Infrared SENSING RANGE 38mm 100mm Yes Yes MP2C2HD MP2C4HD SENSITIVITY ADJUSTMENT MODEL NUMBER(S) RESPONSE TIME* HOUSING MATERIAL 10ms 10ms Polycarbonate Polycarbonate Plastic Plastic LENS * NOTE: Total response time is the sum of the sensor head and base response times. See page 503 ADDITIONAL DATA Diffused Mode Specifications Infrared 300mm SENSING RANGE SENSITIVITY ADJUSTMENT 760mm 1.8m Yes Yes Yes MP2D7HD MP2D4HD MP2D1HD -- -- MP2D2HD MODEL NUMBER(S) RESPONSE TIME* HOUSING MATERIAL LENS 10ms 15ms 15ms Polycarbonate Polycarbonate Polycarbonate Plastic Plastic Glass (1HD)/plastic (2HD) See page 503 ADDITIONAL DATA Photoelectric MP Series Modular Specifications * NOTE: Total response time is the sum of the sensor head and base response times. Retro-Reflective Mode Specifications Visible Red Infrared 4.5m 9m SENSITIVITY ADJUSTMENT Yes Yes POLARIZED FILTER Yes No MP2P1HD MP2L1HD -- MP2L2HD 10ms 10ms Polycarbonate Polycarbonate Glass Glass (1HD) Plastic (2HD) SENSING RANGE MODEL NUMBER(S) RESPONSE TIME* HOUSING MATERIAL LENS ADDITIONAL DATA PEPPERL+FUCHS See page 503 * NOTE: Total response time is the sum of the sensor head and base response times. Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 501 Photoelectric Sensors 2-WIRE AC HEADS Photoelectric MP Series Modular Thru-Beam Mode Specifications Infrared 36m SENSING RANGE SENSITIVITY ADJUSTMENT MODEL NUMBER(S) Yes TRANSMITTER MPE3HD TRANSMITTER MPE4HD RECEIVER MP2R2HD RESPONSE TIME* 10ms HOUSING MATERIAL LENS Polycarbonate Glass (3HD) Plastic (4HD/2HD) See page 503 ADDITIONAL DATA * NOTE: Total response time is the sum of the sensor head and base response times. Fiber Optic Mode Specifications Infrared Visible Red Determined by cable* Determined by cable* SENSING RANGE SENSITIVITY ADJUSTMENT Yes Yes MP2F1HD MP2F2HD 1ms 1ms Polycarbonate Polycarbonate Glass Glass MODEL NUMBER(S) RESPONSE TIME* HOUSING MATERIAL LENS ADDITIONAL DATA See page 503 * NOTE: Total response time is the sum of the sensor head and base response times. *See pages 731-762 for glass and plastic fiber optic lengths and specifications. 502 PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com Photoelectric Sensors MP Series Head Specifications Yes (2) LED(s) OPERATING MODE Light on/dark on PROTECTION (IEC) IP69K when all conponents are properly assembled TEMPERATURE RANGE Reference Guide SENSING CHARACTERISTICS Pages 513-516 WIRING DIAGRAMS Pages 517-518 DIMENSIONS Page 519 ACCESSORIES Pages 520-524 Photoelectric MP Series Modular MP Series Head Specifications -22F to +158F WORKING -67F to +185F STORAGE 95% RH (non-condensing) HUMIDITY RANGE 10G,10-500 Hz VIBRATION 50G SHOCK HEAD HOUSING Glass-filled polycarbonate ACCESS COVER Glass-filled acetal, Type 20 Santoprene SEALS APPROVALS LISTED CERTIFIED General Purpose Yes General Purpose Yes Operating/Adjustment Of All Heads Sensitivity Adjustment Sensitivity Adjustment Alignment Indicators Use a small blade screwdriver to open the cover on top of the sensor head. This exposes the sensitivity adjustment screw, labeled "S". The 15-turn sensitivity potentiometer will normally click at both extremes of the sensitivity range. - Turn the screw clockwise to increase the sensitivity. - Turn the screw counterclockwise to decrease sensitivity. - Snap the cover closed and fasten with a screw. Fiber Optic Head Options Light On/Dark On Mode Selector Switch Every MP Series photoelectric sensor head has a light on/dark on selector switch located on the PC board inside the sensor head. The operating mode should be set prior to assembling the head to its respective base. Dark On - The output (load) is energized when the light is blocked (retro and thru scan), or object absent (diffuse scan); the photosensor is dark. Light On - The output (load) is energized when the light is not blocked (retro and thru scan), or object is present (diffuse scan); the photosensor is illuminated. Alignment Indicators Two LED indicators are located on top of the sensor head. Sufficient light level turns the green light ON. When the light level decreases to 150% of the minimum operating level, the red light turns ON. PEPPERL+FUCHS Fiber optic heads are furnished in two cable connection styles, MPF and MPG, as designated by the first three letters in their catalog listings. MPF fiber optic sensor heads use dual slot glass cables and are part of the original MP product line. The sensor head has a dual slot end tip bezel connection on the sensor head which maintains compatibility with FE-MLS8C-FO sensors. With the MPZFOADPT adapter, the MPF heads can accept plastic cables too. MPG fiber optic sensor heads use universal style glass cables. MPG heads accept the same universal style cables used with our MHP miniature high performance sensors and furnished by many manufacturers of photoelectric products. They cannot be used with plastic cables. Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 503 Photoelectric Sensors Photoelectric MP Series Modular PLUG-IN BASE Specifications AC/DC DC AC MPS18HD MPS30HD MPS10HD -- MPS31HD MPS11HD -- MPS32HD MPS12HD -- MPS33HD MPS13HD -- -- MPS17HD Thyristor 1 NPN (31HD) 1 PNP (32HD) 1 NPN and 1 PNP (33HD) Solid state relay (11HD/12HD) Thyrister (17HD) 100mA max. 250mA max. (31HD/32D) 100mA max. (33HD) 5mA-1A (11HD/12HD) 100mA max. (17HD) 10A 10A 200A (11HD) 240A (12HD) 10A (17HD) 250mA for 8ms, (non-repetitive) -- 30A for 8ms (11HD/12HD) 250mA for 8ms (17HD) 5VDC (DC operation) 1.0VDC (31HD/32HD) 0.8 VDC (33HD) 1.4VAC at rated load (11HD/12HD) 3V at 60mA (17HD) 2ms 10s 10ms (11HD/12HD) 2ms (17HD) SHORT CIRCUIT AND OVERLOAD PROTECTION No No (30HD/31HD/32HD) Yes (33HD) No REVERSE POLARITY PROTECTION No Yes No 10.8-140VDC 18-140VAC, 50/60Hz 10-30VDC 92-132VAC, 50/60Hz (10HD/11H/17HD) 198-264VAC, 50/60Hz (12HD/13HD) CURRENT CONSUMPTION 50mA 25mA 70mA ELECTRICAL CONNECTION Dependent on receptacle selection Dependent on receptacle selection Dependent on receptacle selection MODEL NUMBER(S) OUTPUT LOAD CURRENT LEAKAGE CURRENT INRUSH CURRENT VOLTAGE DROP RESPONSE TIME* SUPPLY VOLTAGE ADDITIONAL DATA See page 505 * NOTE: Total response time is the sum of the sensor head and base response times. NOTE: Emitter base only. 504 PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com Photoelectric Sensors PLUG-IN BASE DPDT RELAY BASE Photoelectric MP Series Modular Plug-in Base Specifications Specifications AC TEMPERATURE RANGE WORKING -22F to +158F MODEL NUMBER MPSD11HD STORAGE -67F to +185F SUPPLY VOLTAGE 92-132VAC, 50/60Hz 50G SHOCK 10G,10-500Hz VIBRATION 95% RH (non-condensing) HUMIDITY RANGE Santoprene HEAD/BASE SEAL Buna-N RECEPTACLE/BASE SEAL NEMA ICS5-2000 See page 6 ELECTROMAGNETIC COMPATIBILITY COMPLIANCE IP69K when all components are properly assembled PROTECTION (IEC) OUTPUT DPDT relay ELECTRICAL CONACT RATING 250VAC/5A POWER CONSUMPTION MECHANICAL LIFE OF RELAY RESPONSE TIME* operations 10ms ELECTROMAGNETIC COMPATIBILITY COMPLIANCE NEMA ICS 5-2000 See page 6 IP69K when all components are properly assembled PROTECTION (IEC) Glass-filled Polysulfone HOUSING MATERIAL 6.6VA 5x107 OPERATING -22F to 158F STORAGE -67F to 185F TEMPERATURE APPROVALS General Purpose Yes General Purpose Yes SHOCK LISTED CERTIFIED 10G VIBRATION 6G, 10-55Hz @ double amplitude of 1mm HUMIDITY 95% RH (non-condensing) HOUSING MATERIAL APPROVALS Glass-filled Polysulfone General Purpose Yes General Purpose Yes LISTED CERTIFIED RECEPTACLE ELECTRICAL CONNECTION dependent on receptacle selection ADDITIONAL DATA See page 506 * NOTE: Total response time is the sum of the sensor head and base response times. MODEL(S) MPB20 Standard 4-terminal, 1/2" NPT conduit thread MPB21 1.8m 5-conductor preleaded PVC cable MPB22 5-pin mini connector MPB25 3.7m 5-conductor preleaded PVC cable MPB26 3.7m 5-conductor preleaded Super-trex cable MPB27 4-pin micro connector MPB30 Standard 4-terminal, pg13.5 conduit thread DPDT PLUG-IN RECEPTACLE MODEL(S) See pages 767-812 for cordsets PEPPERL+FUCHS MPB23 8-terminal, 1/2" NPT conduit hole. MPB24 8-terminal, pg13.5 conduit thread. Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 505 Photoelectric Sensors Photoelectric MP Series Modular SPDT RELAY BASE Specifications DC AC MPV31HD MPV11HD -- MPV12HD -- MPV13HD -- MPV14HD MODEL NUMBER(S) SPDT relay SPDT relay 10-30VDC 103-132VAC, 50/60Hz (11HD) 192-264VAC, 50/60Hz (12HD) 22-26VAC, 50/60Hz (13HD) 20-260VAC/DC (14HD) POWER CONSUMPTION 10VA 10VA (11HD) 18.5VA (12HD) 2VA (13HD) 4VA (14HD) ELECTRICAL DC 28V/6A 24V/6A CONTACT RATING AC 300V/6A 300V/6A OUTPUT SUPPLY VOLTAGE 5-terminal 1/2" conduit hole ELECTRICAL CONNECTION 5-terminal 1/2" conduit hole SPDT Relay Base Specifications 20 X 106 operations MECHANICAL LIFE OF RELAY RESPONSE TIME* TEMPERATURE RANGE 10ms WORKING -22F to +158 F STORAGE -67F to +185F NEMA ICS5-2000 See page 6 ELECTROMAGNETIC COMPATIBILITY COMPLIANCE IP69K when all components are properly assembled PROTECTION (IEC) 10G SHOCK 10G,10-100 Hz VIBRATION HUMIDITY RANGE 95% RH (non-condensing) BASE Glass-filled polycarbonate Buna-N COVER/BASE SEAL HEAD/BASE SEAL Santoprene COVER Die cast zinc APPROVALS 506 LISTED General Purpose Yes CERTIFIED General Purpose Yes PEPPERL+FUCHS * NOTE: Total response time is the sum of the sensor head and base response times. Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com Photoelectric Sensors MINI STYLE BASE Photoelectric MP Series Modular Specifications AC/DC DC AC MPT16HD MPT30HD MPT10HD MPT18HD MPT31HD MPT11HD -- MPT32HD MPT14HD -- MPT33HD MPT17HD Thyristor 1 NPN (31HD) 1 PNP (32HD) 1 NPN and 1 PNP (33HD) Solid state relay (11HD) Thyristor (17HD) 100mA max. 250mA max. (31HD/32D) 100mA max. (33HD) 5mA-500mA (11HD) 100mA max. (17HD) 10A 10A 400A (11HD) 10A (17HD) 250mA for 8ms, (non-repetitive) -- 12A for 16ms (11HD) 250mA for 8ms (17HD) 3V (16HD, DC operation) 5V (18HD, DC operation) 1VDC (32HD/31HD) 0.6 VDC (33HD) 1.2VAC at rated (11HD) 3V (17HD) 2ms 10s 10ms (11HD) 2ms (17HD) SHORT CIRCUIT AND OVERLOAD PROTECTION No No (30HD/31HD/32HD) Yes (33HD) No REVERSE POLARITY PROTECTION No No No 10.8-140VDC 18-140VAC, 50/60Hz 10-30VDC 92-132VAC, 50/60Hz (10HD/11H/17HD) 198-264VAC, 50/60Hz (12HD/13HD) 70mA (16HD) 50mA (18HD) 25mA 70mA MODEL NUMBER(S) OUTPUT LOAD CURRENT LEAKAGE CURRENT INRUSH CURRENT VOLTAGE DROP RESPONSE TIME* SUPPLY VOLTAGE CURRENT CONSUMPTION 2-meter cable, PVC covered, 4-conductor, #18AWG ELECTRICAL CONNECTION 2-meter cable, PVC covered, 4-conductor, #18AWG 2-meter cable, PVC covered, 4-conductor, #18AWG See page 509 ADDITIONAL DATA * NOTE: Total response time is the sum of the sensor head and base response times. NOTE: Emitter base only. PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 507 Photoelectric Sensors Photoelectric MP Series Modular MINI STYLE BASE Specifications DC DC AC MPT40HD MPT40HD-CM MPT20HD MPT41HD MPT41HD-CM MPT21HD MPT42HD MPT42HD-CM MPT27HD MPT43HD -- -- OUTPUT 1 NPN (41HD) 1 PNP (42HD) 1 NPN and 1 PNP (43HD) 1 NPN (41HD) 1 PNP (42HD) Solid state relay (21HD) Thyristor (27HD) LOAD CURRENT 250mA max. (41HD/42D) 100mA max. (43HD) 250mA max. 5mA max. (21HD) 100mA max. (27HD) 10A 10A 400A (21HD) 10A (27HD) -- -- 12A for 16ms (21HD/22HD) 250mA for 8ms (27HD) 1VDC (42HD/41HD) 0.6 VDC (43HD) 1VDC 1.2VAC (21HD) 3V (27HD) 10s 10s 10ms (21HD) 2ms (27HD) No (40HD/41HD/42HD) Yes (43HD) No No Yes Yes No 10-30VDC 10-30VDC 92-132VAC, 50/60Hz 25mA 25mA 70mA MODEL NUMBER(S) LEAKAGE CURRENT INRUSH CURRENT VOLTAGE DROP RESPONSE TIME* SHORT CIRCUIT AND OVERLOAD PROTECTION REVERSE POLARITY PROTECTION SUPPLY VOLTAGE CURRENT CONSUMPTION ELECTRICAL CONNECTION Quick disconnect type V94 ADDITIONAL DATA Quick disconnect type V1 Quick disconnect type V93 (20HD) type V95 (21HD/27HD) See page 509 * NOTE: Total response time is the sum of the sensor head and base response times. NOTE: Emitter base only. 508 PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com Photoelectric Sensors MINI STYLE BASE MINI RELAY BASE Specifications AC TEMPERATURE RANGE WORKING -22F to +158F STORAGE -67F to +185F MPW11HD MODEL NUMBER(S) MPW21HD 50G SHOCK 10G,10-500 Hz VIBRATION SUPPLY VOLTAGE 92-132VAC, 50/60Hz HUMIDITY RANGE 95% RH (non-condensing) POWER CONSUMPTION BASE Glass-filled polycarbonate OUTPUT Santoprene BASE SEAL PVC (2m) CABLE NEMA ICS5-2000 See page 6 ELECTROMAGNETIC COMPATIBILITY COMPLIANCE 10VA (including load) SPDT relay 30V/6A DC ELECTRICAL CONTACT RATING AC MECHANICAL LIFE OF RELAY 125V/6A 50 x 10 6 operations RESPONSE TIME* IP69K when all components are properly assembled PROTECTION (IEC) HOUSING MATERIAL 10ms ELECTROMAGNETIC COMPATIBILITY COMPLIANCE Glass-filled Polysulfone IP69K when all components are properly assembled PROTECTION (IEC) APPROVALS NEMA ICS5 - 2000 See page 6 General Purpose Yes LISTED OPERATING -22F to 158F STORAGE -67F to 185F TEMPERATURE CERTIFIED General Purpose Yes 20G (no contact transfer) 100G (no damage) SHOCK VIBRATION 10G, 10-500Hz HUMIDITY 95% RH (non-condensing) HOUSING MATERIAL APPROVALS Photoelectric MP Series Modular Mini Style Base Specifications Glass-filled Polysulfone General Purpose Yes General Purpose Yes LISTED CERTIFIED ELECTRICAL CONNECTION MPW11HD 2-meter cable, PVC covered, 4-conductor, #18AWG MPW21HD Quick disconnect type V95 * NOTE: Total response time is the sum of the sensor head and base response times. PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 509 Photoelectric Sensors Photoelectric MP Series Modular ANALOG PLUG-IN BASE Specifications DC 50mm - 500mm SENSING RANGE MODEL NUMBER(S) OUTPUT MPS35HD VOLTAGE 0-5VDC CURRENT 4-20mA LOAD CURRENT DRIFT 5mA max. (68F to 140F) 3% typical (0 to 68F) 6% typical SHORT CIRCUIT AND OVERLOAD PEOTECTION No REVERSE POLARITY PROTECTION Yes SUPPLY VOLTAGE 12-24VDC POWER CONSUMPTION 40mA REPEATABILITY 1% typical ELECTROMAGNETIC COMPATIBILITY COMPLIANCE NEMA ICS5 - 2000 See page 6 IP69K when all components are properly assembled PROTECTION (IEC) OPERATING +32F to 140F STORAGE -67F to 185F TEMPERATURE HOUSING MATERIAL Glass-filled Polysulfone SHOCK 50G VIBRATION 10G, 10-500Hz HUMIDITY 95% RH (non-condensing) APPROVALS LISTED CERTIFIED General Purpose Yes General Purpose Yes ELECTRICAL CONNECTION Dependent on receptacle selected APPLICATION CONSIDERATION The MPD5HD Head emits an IR beam, which is bounced off the detected object and returned. Depending on the distance to the object and its reflectivity, the head produces a signal with a magnitude proportional to the sensed distance between the object and the head. The MPS35 uses this signal to produce a voltage output and a current output. The MPS35HD base provides a voltage output from 0-5VDC. Maximum voltage occurs when the target is within 2 inches of the head. The voltage output sources voltage to the user's load, which is then connected to the MPS35HD's negative supply terminal or ground. Current flows from the voltage output to ground. The voltage output can only supply up to 5mA of current and therefore, the load impedance must be 1000 ohms or more. Lower impedances will produce false output voltage readings. The MPS35HD base also provides a current output from 4-20mA. Maximum current occurs when the target is within 2 inches of the head. The user's load is connected from the MPS35HD's positive supply terminal and to the analog current "output" terminal. The "output" pin sinks current (current flows into it). Output current is monitored through an internal resistor in the current amplifier. As the target is moved toward the sense head, increased current is sent to the load and to the sense resistor. Without limitations, this current would produce voltages across these two resistances that would exceed the MPS35HD's supply voltage. Under these conditions, the output current will reach some value and just stay there. Therefore, to ensure proper operation of the MPD5HD/MPS35HD sensor, the current output load resistance cannot exceed 250 ohms. The current output can only operate with loads of 0-250 ohms. The MPD5HD head produces only one output signal from which the MPS35HD produces its voltage output. The voltage output is then used to run the current amplifier via an internal connection. There is only one set of range and offset adjustments provided. These adjust both the voltage and current outputs. Due to differences in the two amplifiers, only one output can be set accurately. Therefore only one output should be used with the other left unconnected. Should it be necessary to use both outputs, the voltage output must see a minimum load resistance of 5000 ohms. This is necessary to prevent overloading of the sensor, which could produce incorrect output voltage and current values. Output Curve PLUG-IN RECEPTACLE 5 MODEL(S) MPB20 Standard 4-terminal, 1/2" NPT conduit thread. MPB21 1.8m 5-conductor preleaded PVC cable. MPB22 5-pin mini connector Voltage 4 3 2 1 0 51 102 203 305 406 508 Distance X [mm] 510 PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com Photoelectric Sensors 2-WIRE AC BASE AC/DC AC MODEL NUMBER MPS14HD MP2S11HD SUPPLY VOLTAGE 22-26VAC/DC 22-260VAC 70mA -- OUTPUT -- Solid state AC relay LOAD CURRENT -- 500mA max. LEAKAGE CURRENT -- 1.9mA INRUSH CURRENT -- 5A/8ms VOLTAGE DROP -- 10V RESPONSE TIME* -- 2ms SHORT CIRCUIT AND OVERLOAD PEOTECTION No No REVERSE POLARITY PROTECTION No Yes Dependent on receptacle selected Dependent on receptacle selected POWER CONSUMPTION ELECTRICAL CONNECTION NOTE: For specifications on Models: MPS10HD, MPS13HD and MPS30HD emitter bases, see pages 504-505 * NOTE: Total response time is the sum of the sensor head and base response times. Photoelectric MP Series Modular Specifications NOTE: Emitter base only. 2-Wire AC Base Specifications ELECTROMAGNETIC COMPATIBILITY COMPLIANCE NEMA ICS5 - 2000 See page 6 IP69K when all components are properly assembled PROTECTION (IEC) OPERATING -22F to 158F TEMPERATURE STORAGE HOUSING MATERIAL SHOCK -67F to 185F PLUG-IN RECEPTACLE MODEL(S) MPB20 Standard 4-terminal, 1/2" NPT conduit thread. MPB21 1.8m 5-conductor preleaded PVC cable. MPB22 5-pin mini connector Glass-filled Polysulfone 50G VIBRATION 10G,10-500 Hz HUMIDITY RANGE 95% RH (non-condensing) PLUG-IN RECEPTACLE APPROVALS Die-cast zinc General Purpose Yes General Purpose Yes LISTED CERTIFIED PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 511 Photoelectric Sensors Photoelectric MP Series Modular 2-WIRE AC MINI BASE PLUG-IN RECEPTACLE Specifications AC MODEL NUMBER(S) SUPPLY VOLTAGE MP2T11HD MODEL(S) MP2T21HD MPB20 Standard 4 terminal, 1/2" NPT conduit thread. MPB21 1.8m 5-conductor preleaded PVC cable. MPB22 5-pin mini connector 92 -132VAC, 50/60Hz OUTPUT Thyristor LEAKAGE CURRENT 1.5mA VOLTAGE DROP -- RESPONSE TIME* 10ms SHORT CIRCUIT AND OVERLOAD PEOTECTION No REVERSE POLARITY PROTECTION No ELECTROMAGNETIC COMPATIBILITY COMPLIANCE NEMA ICS5 - 2000 See page 6 IP69K when all components are properly assembled PROTECTION (IEC) OPERATING -22F to 185F STORAGE -67F to 185F TEMPERATURE HOUSING MATERIAL APPROVALS LISTED CERTIFIED Glass filled Polysulfone General Purpose Yes General Purpose Yes ELECTRICAL CONNECTION MP2T11HD 2-meter cable, PVC covered, 4-conductor, #18AWG MP2T21HD Quick disconnect type V93 * NOTE: Total response time is the sum of the sensor head and base response times. 512 PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com Photoelectric Sensors Standard Head Sensing Characteristics Diffuse Beam Sensing Characteristics Convergent Scan Sensing Characteristics Excess Gain vs. Sensing Range Excess Gain vs. Sensing Range MPC6HD/MPC26HD MPD2HD 13 9 MPC26HD 7 5 MPC6HD 3 Excess Gain 150 11 Excess Gain Excess Gain MPD4HD 200 100 20 10 100 50 5 2 1 50.8 25.4 0 x 76.2 152.4 127.0 101.6 0 0 1 0.3 .03 Distance X [mm] x 500 1000 3 1270 Distance X [mm] x Distance X [m] Diffuse Scan Sensing Characteristics Excess Gain vs. Sensing Range Movement Characteristics MPD6HD 10 0 MPD4 0.4 Offset Y [mm] 3 2 MPD1 20 Offset Y [mm] 10 MPD4HD/6HD 0.6 30 Excess Gain Movement Characteristics MPD1/D2 40 100 Max. Recommended Range (clean air) MPD2 -10 0.2 0.1 0 -0.1 -0.2 MPD6 -20 -0.4 -30 1 10 20 x 200 500 800 -40 -0.6 Distance X [mm] 0 0.5 1.5 1 2 3 2.5 1 0.5 0 x Distance X [m] Distance X [m] y y x Photoelectric MP Series Modular Excess Gain vs. Sensing Range 15 Polarized Scan Sensing Characteristics Excess Gain vs. Sensing Range Excess Gain vs. Sensing Range MPP1HD 10 Movement Characteristics MPP6HD 100 MPP1HD/P6HD 100 MPP6 60 3 RR6 RR1 Offset Y [mm] Excess Gain Excess Gain RR1 10 30 MPP1 0 -30 Max. Recommended Range (clean air) -60 RR6 -100 1 1 0.3 3 0.6 x 9 0.1 0.2 0.5 x 1 3 4 6 7 Distance X [m] x Distance X [m] y Distance X [m] 6 3 Retro-Reflective Scan Sensing Characteristics Movement Characteristics MPL2HD/6HD Movement Characteristics MPL1/MPL2 70 MPL2 3 2 MPL1 20 0 Offset Y [mm] Offset Y [mm] Max. Recommended Range (clean air) -20 -40 0.1 0.2 x 3 6 Distance X [m] PEPPERL+FUCHS 100 70 50 30 0 -30 -50 -70 -100 -130 -70 1 0 0.5 1 2 3 x y Excess Gain 40 10 MPL6HD 130 5 6 Distance X [m] 7 8 9 1 4 x 7 10 Distance X [m] y Excess Gain vs. Sensing Range 100 Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 513 Photoelectric Sensors Standard Head Sensing Characteristics Thru-Beam Scan Sensing Characteristics Movement Characteristics MPEHD/MPRHD 1250 Offset Y [mm] Excess Gain MPE6HD/MPR6HD 1750 10 3 2 1 4 30 x 200 0 -200 Max. Recommended Range (clean air) -750 -1250 70 60 750 -1750 Distance X [m] 0 3 10 20 x 30 40 50 60 y Distance X [m] Fiber Optic Sensing Characteristics Movement Characteristics MPF1HD/MPF6HD/MPG6HD Offset Y [mm] 5 Max. Recommended Range (clean air) 0 -5 10.16 8.13 6.10 4.06 2.03 0 -2.03 -4.06 -6.10 -8.13 -10.16 -10 20 60 80 MPF1HD/MPF6HD B2B-3 PAD6-M 100 50 DIFFUSE 10 5 1 100 12.7 x Distance X [mm] 25.4 38.1 50.8 0 65.5 .003 0.2 .025 x Distance X [mm] 0.8 Distance X [m] y y x 40 Excess Gain vs. Sensing Range 1000 600 0 0 5 MPF2HD/MPG2HD Excess Gain Movement Characteristics 10 Offset Y [mm] Photoelectric MP Series Modular Excess Gain vs. Sensing Range with Glass Cable 100 Typical Scan Distances for MP Series Fiber Optics (Clean Air) SENSOR Scan Technique Glass W/O Lens Glass W/Lens (Accessories FE-FZ-L3) Plastic W/O Lens Plastic W/Lens (Accessories FE-PA-L1) MPF6HD MPF1HD MPG6HD Diffuse 100mm N/A N/A N/A Thru-Beam 500mm 3m N/A N/A Thru-Beam 762mm 46mm N/A N/A MPFE6HD MPFR6HD MPF2HD MPG2HD Diffuse 36mm N/A 14mm N/A Thru-Beam 178mm 690mm 76mm 762mm Actual distance is limited by length of cables used. Distance values are given as a guide to relative optical power and rating using 3ft. glass and 1m plastic cables. 514 PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 2 Photoelectric Sensors 2-Wire AC Head Sensing Characteristics Convergent Scan Sensing Characteristics Excess Gain vs. Sensing Range MP2C2HD/C4HD Movement Characteristics 100 25 38 50 63 x 76 88 101 114 5.00 2.0 3.80 1.5 2.54 Offset Y [mm] MP2C4 101 Offset Y [mm] Excess Gain MP2C2 0.7 0 -0.7 -1.5 1.27 0.00 -1.27 -3.80 -3.0 Distance X [mm] MP2C4HD -2.54 -2.0 122 Movement Characteristics MP2C2HD 3.0 -5.00 24 27 30 33 35 38 40 43 46 48 50 76 x 88 84 95 102 108 114 120 127 x Distance X [mm] y y Distance X [mm] Diffuse Scan Sensing Characteristics Excess Gain vs. Sensing Range Movement Characteristics MP2D1HD/D2HD/D4HD MP2D4HD Movement Characteristics 38 100 1 0 0.48 0.76 x 1.0 1.4 12 0 -12 25 MP2D1 12 0 -12 -25 -25 MP2D2 0.24 Offset Y [mm] Offset Y [mm] MP2D4 -38 1.5 1.7 2.0 2.3 -38 0 Distance X [m] .01 0.3 0.6 0.4 0.7 -50 0.9 0 0.3 0.6 x Distance X [m] 0.9 1.2 Distance X [m] 1.5 1.8 y y x Polarized Scan Sensing Characteristics Excess Gain vs. Sensing Range Movement Characteristics MP2P1HD 100 MP2P1HD 152 Offset Y [mm] 101 Excess Gain 10 50 0 -50 -101 1 -152 0 1.5 3.5 x 4.6 6.1 Distance X [m] 7.6 9.1 0 1.5 x 3.5 4.6 6.1 7.6 9.1 Distance X [m] y Excess Gain MP2D1 MP2D2 38 25 10 MP2D1HD/MP2D2HD 50 Photoelectric MP Series Modular 102 PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 515 Photoelectric Sensors 2-Wire AC Head Sensing Characteristics Excess Gain vs. Sensing Range Movement Characteristics MP2L1HD/L2HD MP2L1HD/MP2L2HD 203 100 MP2L1 152 Offset Y [mm] Excess Gain MP2L2 10 MP2L1 101 MP2L2 50 0 -50 -101 -152 -203 1 0 1.5 3.5 4.6 x 6.1 7.6 9.1 10.7 0 12.2 1.5 3.5 4.6 x 6.1 7.6 9.1 10.7 12.2 Distance X [m] y Distance X [m] Thru-Beam Scan Sensing Characteristics Excess Gain vs. Sensing Range Movement Characteristics MP2R2HD 10,000 Offset Y [m] 1000 Excess Gain Photoelectric MP Series Modular Retro-Reflective Scan Sensing Characteristics 100 10 1 0.3 30 3 300 x Distance X [m] MP2R2HD/MPE4HD 1.5 1.2 0.9 0.6 0.3 0 -0.3 -0.6 -0.9 -1.2 -1.5 0 6 12 18 24 30 36 x y Distance X [m] Fiber Optic Sensing Characteristics Fiber Optic-Diffuse Scan Glass cable (FE-B2B-3) MPF2F1HD/F2HD Excess Gain vs. Sensing Range with Glass Cable (FE-B2B-3) Fiber Optic-Diffuse Scan MPF2F1HD/F2HD Excess Gain vs. Sensing Range with Plastic Cable (FEF-PAD6-M) MP2F1HD/F2HD MP2F1HD/F2HD 1000 100 10 Excess Gain Excess Gain 102 MP2F1 101 MP2F1 MP2F2 MP2F2 100 1 0 13 25 38 51 64 76 Distance X [mm] x 516 PEPPERL+FUCHS 88 100 0 5 x 10 15 20 25 37 Distance X [mm] Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com Photoelectric Sensors Wiring Diagrams AC DC Terminal Connection Terminal Connection Model: MPS30HD Model: MPT10HD N 2 DC 4 1 3 Cable Connection AC (+) Black L1 White N 4 L1 1 3 Green (Metal Base Only) (-) Green (Metal Base Only) Model: MPT11HD Model: MPS11HD AC Model: MPS31HD 2 N Relay Output 1 3 (+) 4 Load Green (Metal Base Only) Model: MPT14HD L2 AC 2 DC 1 Relay Output L1 L1 24VAC White N Load 3 3 Black (+) 4 4 N (-) Model: MPS32HD Model: MPS12HD 2 AC L1 Relay Output White 3 NOTE: Pins 3 and 4 must be jumpered (jumper wire not included) Black Red Orange 1 Load L1 Green (Metal Base Only) 1 AC 2 DC 4 (-) Model: MPT17HD Green (Metal Base Only) Green (Metal Base Only) AC NOTE: Pins 3 and 4 must be jumpered (jumper wire not included) Model: MPS33HD Orange Load Model: MPW11HD (-) Green (Metal Base Only) AC L1 Green (Metal Base Only) Load 3 1 DC C NC L1(+/-) 115-300V AC/DC L 2(-/+) L1 115V AC Green (Metal Base Only) 2 White Model: MP2T11HD AC Black DC White Model: MPV11HD 1 AC NO C NC 2 Model: MPV12HD 1 AC NO C NC 2 Model: MPV13HD 1 AC NO C NC 2 L1 N.O. COM. N.C. N DC Analog 2 1 V Load (-) Green (Metal Base Only) Model: MPT30HD AC/DC DC AC/DC DC 2 1 N.O. 1 COM.1 N.C.1 N.O.2 COM.2 N.C.2 N 7 6 8 5 Load 3 N(-/+) L1(+/-) 24-300V AC/DC L 2(-/+) L1(+/-) 24V AC/DC Model: MPS18 HD AC/DC 2 4 1 Load 3 Green (Metal Base Only) Red (+) Black (-) Model: MPT31HD Model: MPS16HD Model: MPSD11HD 1 L1 AC 3 4 Cable Connection (+) 4 I Load 4 2 N DC Model: MPS35HD Terminal Connection L1 24 VAC N.O. COM. N.C. N L1 Load Terminal Analog Connection 3 L1 N.O. COM. N.C. L2 L1 N.O. COM. N.C. N Orange Blue (+) N.O. COM. N.C. (-) NO Black Red Model: MPV31HD Model: MPS17HD 2 N AC 4 L1 115 VAC L1 (+/-)115-300V AC/DC L2 (-/+) N 1 Load 3 1 3 White (+) 4 Load L2 4 1 Red 2 DC Model: MPS13HD 2 AC Black Photoelectric MP Series Modular Model: MPS10HD 2 AC AC Red (+) White Load Black (-) Model: MPT32HD N(-/+) L1(+/-) 12-140V AC/DC N(-/+) L1(+/-) 12-140V AC/DC DC Red White (+) Load Black (-) Green (Metal Base Only) Model: MP2S11HD AC 2 Load AC/DC 4 1 L1 20-260 VAC 3 Green (Metal Base Only) PEPPERL+FUCHS Model: MPT33HD Model: MPV14HD L2 1 NO C NC 2 L1(+/-) 20-260 VAC/DC N.O. COM. N.C. L2(-/+) DC Red White Load (+) Orange Load Black (-) Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 517 Photoelectric Sensors Wiring Diagrams DC AC/DC Photoelectric MP Series Modular Cable Connection Mini Quick Disconnect Note: Wiring diagrams show quick disconnect pin numbers. Model: MPT16HD AC/DC Model: MPT40HD Black Red Orange Load White DC H76 H77 L1 (+/-)24V AC/DC L1 (+/-)24-300V AC/DC L2 (-/+) N (-/+) Model: MPT18HD AC/DC Red (+) Black (-) (+) 1 Black 3 2 4 1 3 2 4 1 3 2 4 1 3 2 4 1 (-) Model: MPT41HD Black Red Orange Load White L1 (+/-)12-140V AC/DC L1 (+/-)12-140V AC/DC N (-/+) N (-/+) Red DC H76 H77 AC 3 Red (+) 2 White Load 1 Black (+) White Load Black (-) (-) Model: MPT42HD Note: Wiring diagrams show quick disconnect pin numbers. Model: MPT20HD L1 3 (+) Load 1 Black (+) White Load Black (-) (-) N 2 Black 1 3 White 3 Red 2 White Model: MPT43HD White 2 Black Red DC H76 H77 Mini Quick Disconnect AC 3 Red 3 Red DC H76 H77 L1 N 2 White 4 Green Red (+) Load Load 1 Black (+) White (-) Load Black (-) Green Load Model: MPT21HD AC Black Orange 5 Black 2 Red L1 4 Orange 4 Relay Output 1 White AC/DC Red 2 5 L1 Relay Output 3 1 N White Mini Quick Disconnect N Model: MPT27HD Black AC Orange 5 Black 2 Red 4 Orange Load 1 White L1 115 VAC L1 (+/-)115-300V AC/DC L2 (-/+) N 3 4 2 5 L1 Output Load Red Note: Wiring diagrams show quick disconnect pin numbers. Model: MPT28HD Black 1 White N AC/DC Orange 5 Black 2 Red 4 Orange Load 1 White Model: MPW21HD Green AC 5 Black L1 N.O. COM. N.C. N 2 Red 4 Orange 3 Green 1 White 2 White 1 Black Mini White 2 1 3 White Load White N Orange 2 White Green Load 1 3 4 2 Green (Metal Base Only) N Black Red 5 3 Black 3 2 1 Model: MPB22 N L1 Model: MP2T21HD L1 5 N.O. 3 1 Orange 2 Black 4 L1 Output Red N.C. 4 Red AC Load 3 Orange COM. Red 4 5 L1 (+/-)12-140V AC/DC L1 (+/-)12-140V AC/DC N (-/+) N (-/+) White Black L1 N DC Micro Quick Disconnect Model: MPT42HD-CM Note: Wiring diagrams show quick disconnect pin numbers. Black DC Model: MPT40HD-CM DC (+) 3 Blue 4 3 1 2 (-) 3 Blue Load (+) Model: MPT41HD-CM 1 Brown 3 Blue 518 3 1 2 (-) Brown Load (-) (+) Model: MPB27 Micro (+) Load (-) Blue 4 3 1 2 (-) Black Blue 1 Black 3 Blue 4 3 1 2 White Brown Green (Metal Base Only) Load Brown Black 2 Brown 4 White 4 Black 4 (-) Brown DC Blue (+) 4 Black Blue 1 Brown 1 Brown (+) PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com Photoelectric Sensors Dimensions (mm) 39.6 FIBER OPTIC SENSOR HEAD DIMENSIONS 55.2 47.2 52.3 7.6 43.2 43.2 50.2 40.6 39.2 137.2 REF 10--32 UNF--2B Tapped from rear 12.7/.500 min depth (2) 85.9 59.4 10.2 29.5 52.3 5.1 DIA (2) Mounting Holes 52.3 1/2--14 NPT Photoelectric MP Series Modular SENSOR HEAD, BASE AND RECEPTACLE DIMENSIONS 16.5 20.6 SENSOR HEAD WITH MINI RELAY BASE DIMENSIONS QUICK DISCONNECT MINI BASE DIMENSIONS 4.4 O Mounting Hole 39.6 52.3 19.8 39.6 SQ 25.4 4.6 7 5.1 25.4 40.6 54.4 43.2 90.3 15.2 Front Mount 43.7 6.1 4.44 25.4 6.4 Mounting Hole 7/8--16 UN--2A 3.8 M30 x 1.5 19 O 25.4 O 15.2 5.1 4.44 DIA Mounting Hole 6.4 QUICK DISCONNECT MICRO BASE DIMENSIONS 4.4 O Mounting Hole 25.4 39.6 SQ 25.4 4.6 5.1 M30 X 1.5 25.4 40.6 55 15.2 5.4 1/2--1/4 NPSM M30 x 1.5 8 6.4 Mounting Hole M12x1 25.4 O PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 519 Photoelectric Sensors MULTIFUNCTION TIMER/LOGIC CARD Photoelectric MP Series Modular FOR A COMPLETE CONTROL * Multifuction Time/logic Card * Photoelectric Sensor Head * Reflector (Retro and Polar Scans) CHOICE OF: * * * * Plug-in base Plug-in Receptacle Mini Base Relay Base Multifunction Logic Cards Model No. MPA1HD MPA133HD MPA155HD MPA188HD Description 0.15 to 15 sec. time adjustment 0.001 to 0.1 sec. adjustment 1 to 30 sec. adjustment 0.01 to 1 sec. adjustment Plug-in timer/logic cards easily convert any ON/OFF MP Series photoelectric into a multifunction control. Seven DIP switches located on the timer card provide the user with a choice of seven delay functions including dual delay and motion detection. In addition, light operated or dark operated sensing can be selected by a switch located on the photoelectric sensor head. TIME DELAY OPTIONS The timer/logic cards can be set up to modify the sensor's head output signal. For instance, in thru-scan or reflective scan (L.O. mode), if the logic card is set for OFF delay the sensor does not immediately turn off its output circuit after the beam goes dark or is blocked. Instead it waits until the beam has been dark for a preset time. If set for ON delay, the sensor waits for a preset to time to recognize that the beam is complete. Each timer/logic card has seven DIP switches to select ON delay, OFF delay, or both. The delays range as shown in the Specifications and Order Guide. The cards also offer totally independent range selection and adjustment for ON and OFF delays. ONE SHOT OPTIONS In addition, the timer/logic card offers four modes of operation: 1-shot, a delayed 1-shot, 1-shot drop, and a delayed 1-shot drop. The cards can be adjusted for both the width of the 1-shot pulse and the length of delay before the 1-shot is fired. TIMING OPTION SETTINGS Prior to inserting a multifunction timer card into the photoelectric sensor head, you must properly set DIP switches located on the card. You must also set the L.O./D.O. switch located in the photoelectric sensor head. TIMING ADJUSTMENTS On the top of the MP Series photoelectric sensor head is an access cover. When opened with a small blade screwdriver, the multi-turn timer adjustment screws, labeled "1" and "2," are exposed. Clockwise rotation increases the time range(s). If a single delay option is selected, the other timer adjustment is automatically set to zero. When the sensor head has been set to the desired timing range(s), snap the access cover shut to provide proper head sealing. - + 1 520 PEPPERL+FUCHS 2 S Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com Photoelectric Sensors MULTI-FUNCTION TIMER/LOGIC CARD Timing Options Settings Timing/Ajustment T1 denotes screw adjustment 1 T2 denotes screw adjustment 2 PEPPERL+FUCHS DIP SWITCHES 1-7 Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com Photoelectric MP Series Modular DIP switches on the card are labeled 1-7, with OFF position toward the labels. Refer to the timing chart below for DIP switch settings and their results for a retro-reflective or thru-beam setup. 521 Photoelectric Sensors TARGET Photoelectric MP Series Modular TARGET Reflector NO TARGET Leading Edge Reflector Trailing Edge TARGET Reflector TARGET PRESENT LEADING EDGE TARGET GONE TRAILING EDGE Dark On Output is OFF Output doesn't turn on until the time delay period has expired. Output is OFF Light On Output is ON Output is OFF Output doesn't turn back on until the delay period has expired. Dark On Output is OFF Output is ON Output remains on for the amount of time set for the off delay. The output turns off when the delay period has expired. Light On Output is ON Output will not turn off until the time delay has expired. Output turns back on. Output is OFF Output doesn't turn on until the time delay period has expired. Output doesn't turn back off until the time delay period has expired Output turns on after the time delay period has expired. Output turns off after the time delay period has expired. Output turns back on after the delay period has expired. ON Delay OFF Delay Dark On ON/OFF Delay Light On 1-shot Dark On Output is OFF Dark On Output is ON Light On Output is ON 1-shot Drop Dark On Output is OFF The output turns on as soon as the target is present. The output will remain on only for the amount of time set. Output turns off only for the amount of time set. When that time expires, the output will turn back on. Output is OFF If the time set for the output to turn off has not expired, the output will remain off. If the time set for the output to remain off expired while the target was still in front of the sensor and the output turned back on, the output will remain on. Output remains ON Output turns off only for the amount of time set. When that time expires, the output will turn back on. Output is OFF Output turns on after the time delay period has expired. Output remains on only for the time period set, when that time expires the output will turn back off. Output turns on after the time delay period expires. Output turns on only for the time period set. When that time expires, the output will turn back off. Output remains off if the one shot time period has expired. If the one shot period hasn't expired, the output will remain on. Delayed 1-shot Light On If the time set for the output to turn on has not run out, the output will remain on. If the time set for the output to remain on expired while the target was still in front of the sensor and the output turned back off, the output will remain off. Dark On Output is ON Output is ON Output turns off after the time delay period has expired. Output turns off only for the time period set, when that time expires, the output will turn back on. Light On Output is ON Output turns off after the time delay period expires. Output turns on only for the time period set. When that time expires, the output will turn back on. Output remains off if the one shot time period had expired. If the one shot period hasn't expired, the output will remain on. Delayed 1-shot Drop TARGET MOVING CONDITIONS TARGET NOT MOVING CONDITIONS Motion Detector OFF with no Motion Light or Dark On Output is ON Output is OFF Motion Detector ON with no Motion Light or Dark On Output is OFF Output is ON 522 PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com Photoelectric Sensors Accessories (Dimensions in mm) Swivel Mounting Brackets Optional mounting brackets (MPZB01 or MPZB02) can be provided that fit around the treaded portion of the mini base. The brackets allow the base to rotate 360 degrees. A 30mm mounting nut and lockwasher is included for securing the mini base to the bracket. The basic ball and swivel mounting bracket (360 swivel 10 tilt) consists of two plastic brackets and the spherical plastic swivel nut. The swivel nut has M30 threading for direct installation of the MPT (mini MP base), including the quick disconnect versions. The bracket (MPZB06) can be directly mounted to a surface, or the MPZB07 mounting plate may be used. The MPZB08 adapter allows you to connect the ball and swivel bracket to the MP relay (MPV) and MP plug-in bases (MPS). MPZB01 54.6 31.8 19.1 (2) 30.5 7.1 O (2) Screw (2) 10.32 on 2.0 (50.8) center 16 31.8 29.2 71.1 44.5 31.8 Modular Photoelectric Control 22.9 R Washer (2) 25.4 3 MAX R (2) MPZB07 MPZB02 54.6 31.8 19.1 (2) 31.8 29.2 54.6 R (12) 30.5 71.1 16 Nut--Special 7.1 O Bracket (2) 22.9 R 31.8 Nut (2) 44.5 O 3 MAX R (2) Exploded View of MPZB06 45 deg. TYP Mounting Brackets MPZB11 Model No. MPZB01 MPZB02 MPZB05 MPZB06 FE-MB8 MPZB07 MPZB08 MPZB12 MPZB14 Photoelectric MP Series Modular Mounting Brackets Description Mini MP mounting bracket, vertical slots Mini MP mounting bracket, circular slots Photoswitch 5000 to plug-in adapter (requires L shaped underbracket) Ball and swivel mounting bracket (fits 30mm mini MP) Ball and swivel vertical mounting plate Adapter (use with MPZB06 to fit 1/2" conduit hole) Photoswitch 4000 (MLS8C) to limit switch style (combination of the MPZB11 and FE-MB8) Combination of the MPZB06 and MPZB07 bracket MPZB12 Other Accessories Model No. MPZFOADPT MPZN01 MPZN02 MPGKITC MPZR01 MPZR02 PEPPERL+FUCHS Description Pair of fiber cable adapters allows use of cutable 1000 micron plastic cable Mini base steel mounting nut and lockwasher Mini base plastic mounting nut and lockwasher Pair of cable end tips and accessories for universal cables Replacement relay for MPV series--6A SPDT Replacement relay for MPSD series--5A DPDT Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 523 Photoelectric Sensors Photoelectric MP Series Modular Notes 524 PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com