B 12 1 10 9 k 115.54 REF 14.00 +0.10 TYP 9.00 +0.10 TYP OUVD VOUVA VOUVS VOOV i 9,00 +0.10 TYP TO 14.25 ft TYP SEE DETAIL B DATE CODE LOCATION eee NOTE 9 26,25 PART NUMBER DESCRIPTION VIEW COMPLIANT TAIL PLATING 1726705001 4 LIGHT PORTS SEE PG 2 MATTE TIN INNER 2 PORTS SEE PG 2 MATTE TIN OUTER 2 PORTS SEE PG 2 MATTE TIN REF 114.00 NOTES 1. MATERIAL: CAGE: NICKEL SILVER, THICKNESS: 0.25mm COLOR: BLACK UL 94V-0, COLOR: BLACK TERMINALS: TIN BRASS EMI GASKET: PHOS-BRONZE LIGHTPIPE HOUSING: ZINC LIGHTPIPES: POLYCARBONATE, COLOR: CLEAR . FINISHES: SEE NOTE 7 CONNECTOR HOUSING: GLASS FILLED LIQUID CRYSTAL POLYMER (LCP), UL 94V-0, OVERMOLD TERMINAL HOUSING: GLASS FILLED LIQUID CRYSTAL POLYMER (LCP), TERMINALS: CONTACT AREA: 0.76 MICROMETERS MINIMUM HARD GOLD 3.28_| REF 63.25 REF CLASS *A* [see NOTE 6 - 25.20 +0.20 Oo oO oO 0 oO oO Oo oO Oo 25,83 REF OVER 1.27 MICROMETERS MINIMUM NICKEL. COMPLIANT TAIL - MATTE TIN/LEAD OPTION: 0.76 TO 1.52 MICROMETERS | 90/10 MATTE TIN-LEAD OVER 0.76 MICROMETERS MINIMUM NICKEL. , COMPLIANT TAIL - MATTE TIN OPTION: 0.76 TO 152 MICROMETERS MATTE TIN OVER 0.76 MICROMETERS MINIMUM NICKEL. LIGHTPIPE HOUSING: 80 MICROMETERS MINIMUM NICKEL OVER COPPER EMI GASKET: 2.54 MICROMETERS MINIMUM NICKEL OVERALL . REFER TO PS-75310-001 PRODUCT SPEC FOR ALL ELECTRICAL, MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS. . LIGHTPIPE PAD LAYOUT IS FOR 0805 LOW-PROFILE LED PACKAGE, FOR OTHER RECOMMENDED LAYOUTS REFER TO MOLEXS REPORT TS-75310-001. . REFER TO PK-76352-001 FOR ALL PACKAGING SPECIFICATIONS. . ALL EXTERIOR SURFACES TO BE CLASS B SURFACE EXCEPT THE UNDER SIDE OF THE CAGE WHERE THE PCB WOULD BE LOCATED AND AS NOTED. THE SURFACES TO CONFORM TO THE MOLEX COSMETIC DOC PS-45499-002. . THE OVERALL CAGE WIDTH AT THE VERTICAL CENTER OF THE FRONT EDGE WILL FALL WITHIN THIS DIMENSION: 114.80+/-0.30 MM. THIS PORTION OF THE CAGE WILL FLEX INWARD AS THE CAGE IS BEING INSERTED INTO THE BEZEL OPENING. . REFER TO AS-76090-001 FOR HIGH SPEED ROUTING RECOMMENDATIONS. . DATE CODE LOCATION IS SHOWN ABOVE. DATE CODE FORMAT: DDDY MX A1 DDD = DAY OF THE YEAR Y = YEAR 3.05 GROUNDS TYP 8.00 h TYP 49.60 2.07 +0.25 | SIGNALS tL TYP 51.62 MX = MOLEX A = ALPHA CHARACTER - INDICATES MANUFACTURING LINE 1 = NUMERIC CHARACTER - INDICATES PRODUCTION SHIFT 2044/04/28 2044/04/28 2014/08/04 INITIAL RELEASE EC NO: UCP2014-4484 CH'KD:BBARKER APPR: SMILLER DESCRIPTION QUALITY SYMBOLS) WO Wo WO GENERAL TOLERANCES (UNLESS SPECIFIED) DIMENSION STYLE MM ONLY SCALE | 2:1 DESIGN UNITS METRIC THIRD. ANGLE PROJECTION lod mm INCH DRAWN BY DATE 4 PLACES $--- WHIPPLE 2014/04/28 TITLE STACKED SFP_2X8 ASS'Y 3 PLACES +--- CHECKED BY DATE 2 PLACES + 0.13 WITH METAL EM| GASKET AND LIGHTPIPES 1 PLACE +0.25 re { ! APPROVED BY DATE MILLER 0 PLACE 7" 2014/08/04 |MATERIAL NO. 2>|DRWN-RWHIPPLE REV ANGULAR + 5 WITHIN DIMENSIONS DRAFT WHERE APPLICABLE MUST REMAIN SEE TABLE DOCUMENT NO, RSD-172670-0001 SHEET NO. 1. OF 5 SIZE | THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T| Rev. G 2012/01/11 12 11 10 7 6 5 } 4 3 poz ft WITH INNER LIGHTPIPE PORTS 114.85 REF 13 12 1 10 9 8 7 6 5 4 3 2 1 114.50 #0.20 SEE NOTE 7 PSS TOTO Co = & S$ QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS | THIRD ANGLE 228] |sympots| (UNLESS SPECIFIED) MM ONLY 2:1 METRIC | CleROvECTION xE== mm INCH _ | DRAWN BY DATE THLE ; SSRRZI/ =O GC PLACESHE--- _[--- _RWHIPPLE 2014/04/28 STACKED SFP 2X8 ASSY 4 Ec 3 PLACES|+--- _|+--- [CHECKED BY DATE WITH METAL EM| GASKET WITH OUTER LIGHTPIPE PORTS A a = os os 5 W-0 2 PLACES |+ 0.13 +777 AND LIGHTPIPES moe a8 Ww TPLACE [0.25 [+--- [APPROVED BY DATE | 5 Eas 0 PLACE [ + SMILLER 2014/08/04 momilex Oo = at ANGULAR + 5 MATERIAL NO. DOCUMENT NO. SHEET NO. Wo eee DRAFT WHERE APPLICABLE|_ SEE SHEET 1 RSD-172670-0001 20F5 MWg a IN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A aw WITHIN DIMENSIONS (C |INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMSSION tb_frame_C_P_AM_T| Rev. G 2012/01/11 2 1 10 9 8 7 6 5 4 3 | 2 | 113 12 1 10 9 8 7 6 5 4 3 | 2 | 1 | >(B] 9.50 8.00 CIRCUIT NUMBERING SEE DETAIL A SEE KEEPOUT DETAIL INNER ZONE DETAIL LIGHTPIPE )--0--G 5 - o-e > -el-e >-e-4 Vf" CH YY, ~ CU FG Fe y t o Bae (ooo 2 0 (Chao Np o doo A a | 4 Y qo Bocce ccc ei yoeleey 73 U peed ie y "nD ooo 0 a H YW), _ mt Yt A Poo 0 0 0 U7 lI) fo oo 0 0 UL Wooo 0 0 Uf a Lo 7 y Foooo , 0 r Y oooom t Fooood ao! oo 3.50 LIGHTPIPE oO le) o) , OUTLINE Y Y Y y y 7) : | 16 Places ] oO oO oO 0 J TRACE KEEPOUT 1.75 AREAS - 18 PLACES | , 18 PLACES ? oO oO oO oO oO oO Qo Y Y Y) Y Y Y Y ! [es ; U U Uj U yj y 18 PLACES 7 e oO oO 8.00) TYP y a a ee J oO oO e oO o oO L 4.50 20.10 4 f -} [7.125] 14.25 14.25 EDGE OF BOARD [7.125] }-- REF TYP TYP [$12 0.10 MAB REF $1.05 40.05 _ 0.13 CAGE GROUND TAILS TYP 2 PLACES 114.00 ee na . RECOMMENDED PCB LAYOUT - COMPONENT SIDE a RECOMMENDED PCB THICKNESS - 2.63 MM (093 INCH) Bo aes TO BE CONSIDERED THE KEEP OUT AREA FOR COMPONENTS TP TY TS GY! (OTHER THAN LIGHTPIPE LED'S) YREUP THIS AREA IS INDICATED BY THE DASHED LINE BEB BS Pe LS le lg 222] [oualy) GENERAL TOLERANCES DRENSON STYLE SCALE | DESIGN UNTS [ | SHIRD. ANGLE wy ibis 328] |sympocs| (UNLESS SPECIFIED) MM_ ONLY 3:1 METRIC PROJECTION (4 ~t = = = mm INCH DRAWN BY DATE TITLE 1 St Las LB La? Lae WZ SRRRlZ|W7-0 [GPLACES|E--- _|2--- WHIPPLE 2044/04/28 STACKED SFP 2X8 ASSY ~.. Ld Las Lie Lis Lay ws 5 3 PLACES: --- _[+--- _ |CRECKED BY DATE WITH METAL EMI GASKET ee oF Steels) WO [2 PLACES #013 [t AND LIGHTPIPES oeeccceccenere wa; & 18 W-o [PLACE [0.25 [eom- PROVED Bye [| CIRCUIT NUMBERING H 3 z e ra 0 PLACE [2 = PR Zoe roel DOCUMENT NO. m x Ssh ANGULAR + 5 . . SHEET NO. COMPONENT SIDE OF BOARD We SE e DRAFT WHERE APPLICABLEL_SEE SHEET 1 RSD-172670-0001 3 0F 5 Aw GG | ArtZ Vo ? O6 --66 | | be 4 414 { | 6 16 LP | Ce | 2.28 -oe VT VY G | 070-4 3.67 i - 95 4 | o6 oP 0.73 __| 125) | a | i] | : 0.25 $000 4 1.90 poss la | J YW 4 u V | 26 y 3.57 4.90 | DETAIL A 711 | 4 SCALE 8:1 7.85 Lt 10.06 1.43 B.13 > y . ARG AL. i | 7 UL yy aa = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE 0.62 238] |sympots| (UNLESS SPECIFIED) MM ONLY 2:1 METRIC Cleroect ION 0.62~1 [-) FREE += = = mm INCH __| DRAWN BY DATE TITLE ; 12.00 SSSI =O [ZPLACES|E--- [#--- RWHIPPLE 2014/04/28 STACKED SFP_2X8 ASS'Y -t 5 3 PLACES [t === CRECKED BY DATE WITH METAL EMI GASKET KEEP OUT ZONE DETAIL - LIGHTPIPE AND OTHER ZONES Petal WO [PLACES | 0-3 AND LIGHTPIPES Wo & xo w =~ 1 PLACE J0,25 APPROVED BY DATE THE HATCHED AREA IN THIS VIEW INDICATES ZONES aR Sa= 0 PLACE [+ SMILLER 2014/08/04 m i xX THAT ARE OCCUPIED BY THE PLASTIC HOUSING THAT weeoe ANGULAR +5 MATERIAL NO. DOCUMENT NO. SHEET NO. SEATS AGAINST THE PCB AND BY THE VERTICAL METAL $a SEE SHEET 1 RSD-172670-0001 4 OFS Worra DRAFT WHERE APPLICABLE CAGE WALL THAT STOPS JUST SHORT OF THE PCB WW SG < SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A i WITHIN DIMENSIONS C |INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T| Rev. G 2012/01/11 12 1 10 9 8 7 6 5 | 4 3 | 2 | 1Rev. G 2012/01/11 3 12 "1 10 8 7 6 5 4 3 2 4 115.30 +0.10 Z= | ! | | | | 26,00+0.10 | | | | | | Z 117.02 MINIMUM BEZEL CUT-OUT DETAIL RECOMMENDED BEZEL THICKNESS: 0.8MM - 2.6MM BEZEL FRONT EDGE OF a CONNECTOR i 26.00 \ BEZEL CUTOUT REF | | | { 0.010.104 BEZEL OPENING PCB ABOVE TOP OF PC BOARD 3.50 20.30 __| 7.00 REF SECTION Z-Z as Ss QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS | THIRD ANGLE SSS ey) UNLESS SPECIED) MM ONLY 21 | meTRIC |CleRovection st = = = mm INCH DRAWN BY DATE TITLE 1 SRRRlz\W7-0 [PLACES|E--- 4 --- WHIPPLE 2014/04/28 STACKED SFP 2X8 ASS'Y J a 3 PLACES|+--- _|+--- __|HECKED BY DATE WITH METAL EM GASKET Peteals| WO [2 PLACES|003 _[2 AND _LIGHTPIPES moos a8 W-o [LACE 0.25 [E-- [APPROVED BY DATE | 5 > ESS 0 PLACE [= = SMILLER 2014/08/04 m xX S = a @ ANGULAR + 5 MATERIAL NO. DOCUMENT NO. SHEET NO, West DRAFT WHERE APPLICABLEL 2EE SHEET 1 RSD-172670-0001 5 OF 5 Mw Ow a _ SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A ip WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T| 42 " 10 8 7 6 5 4 3 | 2 | 1B 12 " 10 9 7 6 5 4 3 2 1 PART NUMBER | DESCRIPTION VIEW _| COMPLIANT TAIL PLATING 763520001 % LIGHT PORTS | SEE PG2|] MATTE TIN/ LEAD 763520002 INNER 2 PORTS | SEE PG 2| MATTE TIN / LEAD 763520003 OUTER 2 PORTS | SEE PG 2[ MATTE TIN / LEAD Wet 763525001 4 LIGHT PORTS | SEE PG 2 MATTE TIN 16.00#0.10 763525002 INNER 2 PORTS | SEE PG 2 MATTE TIN TYP 763525003 OUTER 2 PORTS | SEE PG 2 MATTE TIN 9,00 #0.10 = = = O ) = TYP 0 OUYV OWY OUY OUY OYV OYYV OUY B ee 9.00 20.10 TYP 7 _f DATE CODE LOCATION 14.25 SEE DETAIL B SEE NOTE 9 TYP BX I 114.00 1 SEE NOTE 7 NOTES 4. MATERIAL: CAGE: NICKEL SILVER, THICKNESS: 0.25mm 63.25 REF CONNECTOR HOUSING: GLASS FILLED LIQUID CRYSTAL POLYMER (LCP), UL 94V-0, 328 CLASS *A* COLOR: BLACK REET [see NOTE 6 OVERMOLD TERMINAL HOUSING: GLASS FILLED LIQUID CRYSTAL POLYMER (LCP), UL 94V-0, COLOR: BLACK <>. TERMINALS: TIN BRASS Oo Oo Oo EM GASKET: PHOS-BRONZE Oo Oo [ LIGHTPIPE HOUSING: ZINC ol LIGHTPIPES: POLYCARBONATE, COLOR: CLEAR 25.83 _ FINISHES: 25.20 #0.20 On o_ a: TERMINALS: CONTACT AREA: 0,76 MICROMETERS MINIMUM HARD GOLD O O O [ OVER 1.27 MICROMETERS MINIMUM NICKEL. COMPLIANT TAIL - MATTE TIN/LEAD OPTION: 0.76 TO 152 MICROMETERS | Qo 90/10 MATTE TIN-LEAD OVER 0.76 MICROMETERS MINIMUM NICKEL. : 7 COMPLIANT TAIL - MATTE TIN OPTION: 0.76 TO 152 MICROMETERS AY MATTE TIN OVER 0.76 MICROMETERS MINIMUM NICKEL. _ LIGHTPIPE HOUSING: 80 MICROMETERS MINIMUM NICKEL OVER COPPER 3.05 -| [8.00 EMI GASKET: 2.54 MICROMETERS MINIMUM NICKEL OVERALL oR TYP . REFER TO PS-75310-001 PRODUCT SPEC FOR ALL ELECTRICAL, MECHANICAL 79.60 OTS AND ENVIRONMENTAL SPECIFICATIONS, L Typ . LIGHTPIPE PAD LAYOUT IS FOR 0805 LOW-PROFILE LED PACKAGE, FOR | [50 16D IE OTHER RECOMMENDED LAYOUTS REFER TO MOLEX'S REPORT TS-75310-001. : : . REFER TO PK-76352-001 FOR ALL PACKAGING SPECIFICATIONS. . ALL EXTERIOR SURFACES TO BE CLASS B SURFACE EXCEPT THE UNDER SIDE OF THE CAGE WHERE THE PCB WOULD BE LOCATED AND AS NOTED. THE SURFACES TO CONFORM TO THE MOLEX COSMETIC DOC PS-45499-002. TE OTA Ge ROT ADE FenTeA. CaN GRE ENT BSE FST TEES | ame ears pM. : 06 S25] Isympocs| (UNLESS SPECIFIED) MM ONLY 2 METRIC PROJECTION OF THE CAGE WILL FLEX INWARD AS THE CAGE IS BEING INSERTED INTO * S55 = INCH | DRAWNBY SME AE THE BEZEL OPENING. HRER === -07- STACKED SFP+ 2X8 ASS'Y . REFER TO AS-76090-001 FOR HIGH SPEED ROUTING RECOMMENDATIONS. tah 2|/-O [4 PLACES|#---[#---JLONG 06-07-2007 DATE CODE LOCATION IS SHOWN ABOVE Em a 3 PLACES [+ + pres aey BY PATE WITH METAL EM! GASKET : DATE CODE FORMAT: DDDY MX A1 . 95 Yee S WoO 2 PLACES |/+ 0.13 #777 JLONG 06-07-2007 AND LIGHTPIPES : X a wy w i 1 PLACE -F 0.25 +--- APPROVED BY DATE ve VEARY OF THE YEAR GSez=) |W rack = BANAKIS 06-15-2007 molex MX = MOLEX Ww 8 SR a ANGULAR +5 |MATERIAL NO. DOCUMENT NO. SHEET NO. A = ALPHA CHARACTER - INDICATES MANUFACTURING LINE SuETe DRAFT WHERE APPLICABLE|_2EE TABLE SD-76352-001 1 OF 5 1 = NUMERIC CHARACTER - INDICATES PRODUCTION SHIFT WW So <4 MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX F i WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T| Rev. G 2012/01/11 12 11 10 9 7 6 5 } 4 2 | 2 | 1B 2 " 10 9 7 6 5 4 3 2 1 114.50 40.20 SEE NOTE 7 763520001 AND 763525001 LEI LE LL WITH INNER & OUTER LIGHTPIPE PORTS I I I I ' I I D 0 I I I I ' I I I I I I ' I I I I I I ' I I D 0 0 0 0 O 0 0 0 I I I I ' I I 763520002 AND 763525002 WITH INNER LIGHTPIPE PORTS 114.85 REF Ss s = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS | THIRD ANGLE SSSI |sympors| (UNLESS SPECIFIED) MM ONLY 2:1 METRIC | CleROvECTION Sen mm INCH _ | DRAWN BY DATE TITLE ; i RS R2|G7-0 [PLACES E=-- [E--= LONG 06-07-2007 STACKED SFP+ 2X8 ASS'Y en EF 3 PLACES|+--- _|[+--- __ |CHECKED BY DATE WITH METAL EM! GASKET 763520003 AND 763525003 To teels WO PLACES 0.13 _|+--- _JLONG 06-07-2007 AND LIGHTPIPES WITH OUTER LIGHTPIPE PORTS ty a & $2 1 PLACE [0.25 |t--- [APPROVED BY DATE PS3eee| |W race = BANAKIS 06-15-2007 molex Oo = as we ANGULAR + 5 MATERIAL NO. DOCUMENT NO. SHEET NO. Wo eee DRAFT WHERE APPLICABLE|_ SEE SHEET 1 SD-76352-001 2 0F 5 Mur So (B] 9.50 8.00 CIRCUIT NUMBERING SEE DETAIL A SEE KEEPOUT DETAIL NNER ZONE DETAIL LIGHTPIPE )--0--G 5 - e-e > -al-e >-e-4 Vij; LL YY), ~ Ct. 2 Wu ~* FG y t Oe) oooodo OK ie: ooosd OK: eon OK: edaoe D Hi T ccc qo Bocce ccc ei yoeleey 75 Al Yio oo o of y Hoooo of t |f#o oe 00 Yoodoof H q 4 ooood ie i j oooo ty oooos6 H Wy ojo o 1 Yt YA oooo 7 Ul : ooooo Lh , eoao0o$0o "Y j oop oso Y y | Poo oy , 0 r Y oooom t Fooood ao! oo LIGHTPIPE oO 3.50 OUTLINE 7 7) 7 7 7, y [8 PLACES , oO oO o oO oO oO J ; TRACE KEEPOUT 1.75 AREAS - 18 PLACES | | 18 PLACES ? oO oO oO oO oO oO Qo 7 Y) ) Y Y) y Y ! 4.00 } 7 U U U U U 418 PLACES 7 oO oO oO oO oO 8.00] TYP y a pot J oO oO @ oO oO oO L 4500.10 __| f -} [7.125] 14.25 14.25 EDGE OF BOARD [7.125] }-- REF TYP TYP [$12 0.10 MAB REF 61,05 +0.05 _ 013 CAGE GROUND TAILS TYP 2 PLACES 114.00 ena . RECOMMENDED PCB LAYOUT - COMPONENT SIDE a RECOMMENDED PCB THICKNESS - 2.63 MM (.093 INCH) a TO BE CONSIDERED THE KEEP OUT AREA FOR COMPONENTS TH? TY TBP TP (OTHER THAN LIGHTPIPE LED'S) URE THIS AREA IS INDICATED BY THE DASHED LINE BEREE PLB LS be by S22) [ouauy| GENERAL TOLERANCES DPENSION STYLE SCALE | DESIGN UNTS ] BRB ANGLE wwii SSS] |sympois| (UNLESS SPECIFIED) MM ONLY 3-1 METRIC PROJECTION ft 2 S S mm INCH DRAWN BY DATE TITLE 1 St Las LB La? Lae WZ OP RRRl2/47-0 [PLACES|E--- _|#--- LONG 06-07-2007 STACKED SFP+ 2X8 ASS'Y __ ~. La2 Las Li6 Lis Lay Ah & 3 PLACES |+ --- _[+--- __ [CHECKED BY DATE WITH METAL EMI GASKET oo ee oF ote als| WO [2 PLACES|013_|4--- _|JLONG 06-07-2007 AND LIGHTPIPES Teecceneeee wie & 2 al8le7-p | TPLACE [0.25 |e rereo by Dae | CIRCUIT NUMBERING H 3 z e ra 0 PLACE [2 = MEALS Det 2007 DOCUMENT NO. m x Ssh ANGULAR + 5 . . SHEET NO. COMPONENT SIDE OF BOARD Wee DRAFT WHERE APPLICABLE|_ SEE SHEET 1 SD-76352-001 3 0F 5 HGS =e} EMAIN SE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX F FF WITHIN: DIMENSIONS ( INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION to -frame rout | 12 1" 10 9 8 7 6 5 4 3 | 2 | 4 Rev. G 2012/01/1113 12 | " | 10 | 9 8 7 6 5 4 3 2 1 20 TOT) T1> T10 j r Tl Ti { INNER LIGHTPIPE OUTER LIGHTPIPE [1.09] [uzo)~ 7.60 [1.70] REF OUTER LIGHTPIPE | INNER LIGHTPIPE 7.20 }P1 0.10 @IAIB 16:80} | #0.46#0.05 TYP (0.57 DRILL) (60.88 PAD) [3.80 __| L10 4 _| 160 [}]Z 0.10 @O|AIe| TYP @ 1.85+0,05 TYP L131 L20 pb aoe On 0.98 i Ly | DETAIL B boo o | Gp SCALE 5:1 i Ooo oO; Y CIRCUIT NUMBERING 652 AND LIGHTPIPE Oo 0 90 9 9] | =a IDENTIFICATION Y 0 0 Of: ? py | 0.65 G WY, 2.20 eee be 4 414 { | 6 16 LP | Ce | 2.28 -oe VT VY G | 070-4 3.67 i - Tee i a -o6--9@ 073 aie 0.25 $0 0 0 oY Vy 1.90 oss ta y | y y y iy | 226! y by 4904 | DETAIL A 71 | 4 SCALE 8:1 7.85 Lt 10.06 1.43 B.13 > A . ARG 7 i | OG ~ ese QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS | THIRD ANGLE 0.62 2S) |sympocs| (UNLESS SPECIFIED) MM ONLY 2:1 METRIC Cleroect ION 0.62| I" REF ~2eo mm INCH DRAWN BY DATE TITLE ; _-12.00 mS ARZIW/ =O [PLACES] --- _[+--- __|JLONG 06-07-2007 STACKED SFP+ 2X8 ASS'Y 2 5 3 PLACES [t === CRECKED BY DATE WITH METAL EMI GASKET KEEP OUT ZONE DETAIL - LIGHTPIPE AND OTHER ZONES Dee eale WO [2 PrACES 0.13 JLONG = 06-07-2007 AND LIGHTPIPES wa, ox 1 PLACE [0.25 THE HATCHED AREA IN THIS VIEW INDICATES ZONES GD Sa IN/O Po PLACE TE BANAKIS 06-15-2007 m i xX THAT ARE OCCUPIED BY THE PLASTIC HOUSING THAT weeoe ANGULAR +5 MATERIAL NO. DOCUMENT NO. SHEET NO. SEATS AGAINST THE PCB AND BY THE VERTICAL METAL 2xo SEE SHEET 1 SD-76352-001 0E5 i a DRAFT WHERE APPLICABLE CAGE WALL THAT STOPS JUST SHORT OF THE PCB Win SS = SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX F i WITHIN DIMENSIONS C |INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T| Rev. G 2012/01/11 12 1 10 9 8 7 6 5 | 4 3 | 2 | 1Rev. G 2012/01/11 3 12 "1 10 8 7 6 5 4 3 2 4 115.30 +0.10 Z | \ | | | | 26,00+0.10 | | | | | | Z 117.02 MINIMUM BEZEL CUT-OUT DETAIL RECOMMENDED BEZEL THICKNESS: 0.8MM - 2.6MM BEZEL FRONT EDGE OF a CONNECTOR i 26.00 \ BEZEL CUTOUT REF | | | { oe 0.010.104 BEZEL OPENING PCB ABOVE TOP OF PC BOARD 3.5020.30 _.| 7.00 REF SECTION Z-Z es = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS | THIRD ANGLE S55 ey) UNLESS. SPECIED) MM ONLY 21 | meTRIC |CleRovection = = 2 mm INCH DRAWN BY DATE TITLE 1 RRR 2107-0 |Z PLACES|E--- [= --- __JJLONG 06-07-2007 STACKED SFP+ 2X8 ASS'Y Ah a 3 PLACES|+--- _|+--- [CHECKED BY DATE WITH METAL EMI GASKET Ste als| WO [2 PLACES|013 [2 LONG 06-07-2007 AND _LIGHTPIPES moos a8 Wo PAE 0.25 [E-- [APPROVED BY DATE | 5 > ESS 0 PLACE [= = BANAKIS 06-15-2007 m xX S = a @ ANGULAR + 5 MATERIAL NO. DOCUMENT NO. SHEET NO, Wee DRAFT WHERE APPLICABLE|_ SEE SHEET 1 SD-76352-001 5 OF 5 Hw OO a SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX F ip WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T| 42 " 10 8 7 6 5 4 3 | 2 | 1