REVISIONS REV DESCRIPTION DATE | APPROVED 01, | REVISED ED | om 16195 B | PER EC 0U20-0116-01-02 10/26/04 CHeaang? DESIGN CONTROL REQUIRED 945 +.070 23.2 REF 703 REF ! REF PLANE 17.9 PLANE As OS-50 \ \ san PLUG PLUG 312 HEX TYP 7.9 250 = ACROSS FLATS ID GROOVE XXX = XX.X = ELECTRICAL MECHANICAL ENVIRONMENTAL Nominal Impedance (Ohms) 50 Interface Dimensions MIL-STD-346A, | Temperoture Rating -55C to +125C Frequency Range (GHz) DC to 26.5 GHz Volt Rating (VRMS MAX) 6 Sea Level N/A VSWR 111 MAX DC-18: 113 MAX 18-26.5 Insertion Loss (dB MAX) .07 VAGHz) RF Leakage (dB MIN) -(90f} Corona, 70,000 Ft (VRMS MIN) 159 Dielectric withstanding Voltage (VRMS MIN) @ Sea Level 500 Contact Resistance {Milliohms MAX} Center Contact 4.0 Outer Contact 4.0 Cable ta Housing N/A RF High Potential 6 Sea Level (VRMS MIN 6 5 MHz) 600 LRMegohms MIN) 5,000 Fig. N/A Recommended Mating Torque 7 to 10 in-lbs Mating Characteristics: Insertion (MAX Lbs) N/A Withdrawal (MIN Oz) N/A Force to Engage and Disengage (in-Lbs MAX) 2.0 Center Contact Captivation Axial (Lbs) 4.0 Radial (In-Oz) 4.0 Cable Retention Axial Force (Lbs) N/A Torque (In-Oz) N/A Weight (Grams) N/A Vibration MIL-STD-202, Method 204, Condition D, 20Gs Shock MIL-STD-202. Method 273. Condition |, 100Gs Thermal Shock MIL-STD-202, Methed 107, Conditian B, Moisture Resistance MIL-STD-262, Methed 106 Corrosion - MIL-STD-202, Method 101. Condition B HOUS | NG BUSHING COUPLING NUT DIELECTRIC CENTER CONTACT STAINLESS STEEL PER ASTM-A484 AND ASTM- A582, TYPE 303 TFE FLUOROCARBON PER ASTM-D-1457 BRASS PER ASTM-B-16, HALF HARD PASSIVATE PER ASTM-A380 N/A GOLD PLATE PER MIL-G-45204 RETAINING RING BERYLLIUM COPPER PER N/A ASTM B 194, ALLOY C17200, CONDITION H GASKET S|LICONE RUBBER PER N/A ZZ-R-765 COMPONENT MATERIAL FINISH UNLESS OTHERWISE SPECINED | DRAWN BY DATE DIMENSIONS ARE IN INCHES RMF 2/13/95 TOLERANCE ON CHECKED BY FRAC. DEC. ANGLES 264 2005 RMF 2/13/95 AMP Incorporated 140 Fourth Avenue Waltham, MA 02451-7599 These drawings and specificat- longs are the property of M/A-COM Incorporated and shall not be reproduced or copied or uged In whole or In port as the basis for the manufacture or sale of item(s) without written permission. TITLE USE ASS'Y PROCEDURE OS-50 PLUG TO 3.5mm BSA PLUG SIZE CODE DENT NO. 26805 1250-2330-02 | 01, SCALE 5 : 4 | | SHEET 1 OF 1 CUSTOMER DRAWING AMP PART # 1046308-1 SHEET 1 OF 1 REV B